京都大学 / 新制・課程博士 / 博士(工学) / 甲第23221号 / 工博第4865号 / 新制||工||1759(附属図書館) / 京都大学大学院工学研究科分子工学専攻 / (主査)教授 水落 憲和, 教授 浜地 格, 教授 SIVANIAH Easan / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第19002号 / 工博第4044号 / 新制||工||1622(附属図書館) / 31953 / 京都大学大学院工学研究科分子工学専攻 / (主査)教授 白川 昌宏, 教授 田中 庸裕, 教授 濵地 格 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

This work focuses on improving the quality of carbon-based core-shell materials for high performance liquid chromatography (HPLC) via the characterization of the core materials, and also the development of chromatographic methods (separations) for them. In the early part of this work, I applied organic synthesis to make uniform, spherical poly(divinylbenzene) (PDVB) microspheres, and then carbonized them to prepare carbon core materials for core-shell particle synthesis. Here, I studied in detail the surface and material properties of these particles with multiple instruments, which allowed me to describe the physical and chemical changes that took place during each treatment. The uniform, spherical carbon core materials greatly improved the efficiency of the previously developed carbon-based core-shell HPLC columns from ca. 70,000 plates per meter (N/m) to ca. 110,000 N/m for various alkyl benzenes. Later, I focused on generating application notes to showcase these mixed-mode HPLC columns. Here, liquid chromatography mass spectrometry (LC-MS) was used for the detection of analytes that lack chromophores for UV detection. In this dissertation, Chapter 1 contains a historical background and theory of HPLC along with a review of the use of carbon-based core-shell materials for elevated pH and temperature applications. Chapter 2 describes the improvement of the efficiency of carbon-based materials for HPLC using carbonized PDVB microspheres as the carbon core material. Chapter 3 is a study on the characterization of carbonized PDVB microspheres with multiple instruments. Chapter 4 describes the separation of cannabinoids using three types of carbon-based mixed-mode HPLC columns. Chapter 5 consists of (i) guidelines for the retention mechanism of the core-shell particles that have been commercialized for chromatography by Diamond Analytics, a US Synthetic Company in Orem, Utah, and (ii) application notes for these columns. Finally, Chapter 6 discusses possible future work.

京都大学 / 新制・課程博士 / 博士(人間・環境学) / 甲第25019号 / 人博第1097号 / 新制||人||257(附属図書館) / 京都大学大学院人間・環境学研究科相関環境学専攻 / (主査)教授 小松 直樹, 教授 津江 広人, 教授 藤田 健一, 准教授 Zhao Li / 学位規則第4条第1項該当 / Doctor of Human and Environmental Studies / Kyoto University / DFAM

Current orthopedic internal fixation devices, such as pins and screws, are typically made from metals and have a long list of complications associated with them. Most notably, complications such as infection or decreased wound healing arise from revisional surgeries needed to remove the used hardware. A new class of fixation devices is being produced from biodegradable biomaterials to eliminate the need for revisional surgery by being naturally broken down in the body. While currently available polymers lack the necessary mechanical properties to match bone strength, the incorporation of small amounts of hydroxylated nanodiamonds has been proven to increase the mechanical properties of the native polymer to better resemble native bone. Additionally, modern polymers used in biodegradable fixation devices have degradation rates that are too slow to match the growth of new bone. Poly-(D, L)-lactic-co-glycolic acid (PDLG) incorporated with hydroxylated nanodiamonds has not only been proven to start out stronger, but then also helps the polymer degrade faster when compared to the pure polymer in vivo and prevents effusion of the polymer into the surrounding environment. Nanodiamond incorporation is accomplished via solid state polycondensation of PDLG to create a uniform material with increased mechanical properties, faster degradation rates, and enhanced calcification when tested in simulated body fluid. / Bioengineering

Ce projet s’inscrit dans la contribution à l’élaboration de tenues de protection vis-à-vis d’agents chimiques de guerre : les combinaisons actuelles ont un rôle de barrière, qui stoppent le contaminant sans le dégrader, conduisant à un risque de contamination croisée accru. L’idée novatrice est de recouvrir ces textiles avec une couche intelligente multifonctionnelle et transparent associant un composé actif (TiO2, capable de photo-oxyder les composés toxiques sous irradiation à température ambiante) à un composé passif (nanostructures carbonées, permettant de stocker temporairement les produits de réaction ou le contaminant en cas de manque de lumière ou de pic de contamination). L’étude a commencé sur surfaces modèles afin d’optimiser l’association par assemblages par la méthode Layer-by-Layer (LbL) des différents éléments à savoir, TiO2 à un polymère (PDDA), à du graphène, à du charbon actif ou encore à des nanodiamants. L’efficacité photocatalytique de cette couche sur la dégradation d’un simulant gazeux du gaz moutarde a été testée. Les meilleures revêtements ont ensuite été transférés sur textile et leur efficacité évaluée sur un simulant liquide du gaz Sarin. Des études plus spécifiques ont également été menées pour comprendre l’influence des différents constituants et de l’épaisseur sur l’efficacité photocatalytique du film. Le renforcement de ces textiles fonctionnels contre des contraintes d’abrasion et de lavage a aussi été étudié, ainsi que sa régénération après tests photocatalytiques. / This project is focused on the elaboration of protective suits against Chemical Warfare Agents. Indeed, the suits currently used mainly act as physical barriers, without any degradation of the toxic molecules, thus increasing cross-contamination risks.The original idea is to functionalise textile fibers with a multifunctional, multicomponent and transparent smart layer, combining active components (TiO2, for photo-oxidation of toxic agents under irradiation at room temperature) to passive components (carbon nanostructures, in order to temporary stock the reaction products or the contaminant in case of lack of irradiation or of high contamination level). The study begins on model surfaces, in order to optimise Layer-by-Layer (LbL) association of TiO2 with polymer, graphene, activated carbon, or nanodiamonds. The photocatalytic efficiency of the layer was evaluated towards the degradation of a gaseous mustard gas simulant. The best functionalisations were then transferred to textile and their photocatalytic efficiency were evaluated towards the degradation of a liquid simulant of Sarin gaz. Some detailed results were obtained in order to understand the impact of the different components and of the thickness of the films on the activity. Textiles reinforcement against abrasion and washing were also studied, as well as their regeneration after photocatalytic tests.

New derivatives of carbon nanostructures: nanotubes, nano-onions and nanocrystalline diamonds were obtained through fluorination and subsequent functionalization with sucrose. Chemically modified nanocarbons show high solubility in water, ethanol, DMF and can be used as biomaterials for medical applications. It was demonstrated that sucrose functionalized nanostructures can find applications in nanocomposites due to improved dispersion enabled by polyol functional groups. Additionally, pristine and chemically derivatized carbon nanotubes were studied as nanofillers in epoxy composites. Carbon nanotubes tailored with amino functionalities demonstrated better dispersion and crosslinking with epoxy polymer yielding improved tensile strength and elastic properties of nanocomposites. Reductive functionalization of nanocarbons, also known as Billups reaction, is a powerful method to yield nanomaterials with high degree of surface functionalization. In this method, nanocarbon salts prepared by treatment with lithium or sodium in liquid ammonia react readily with alkyl and aryl halides as well as bromo carboxylic acids. Functionalized materials are soluble in various organic or aqueous solvents. Water soluble nanodiamond derivatives were also synthesized by reductive functionalization of annealed nanodiamonds. Nanodiamond heat pretreatment was necessary to yield surface graphene layers and facilitate electron transfer from reducing agent to the surface of nanoparticles. Other carbon materials such as activated carbon and anthracite coal were also derivatized using reductive functionalization to yield water soluble activated carbon and partially soluble in organic solvents anthracite. It was shown that activated carbon can be effectively functionalized by Billups method. New derivatives of activated carbon can improve water treatment targeting specific impurities and bio active contaminants. It was demonstrated that functionalized carbon nanotubes are suitable for real time radiation measurements. Radiation sensor incorporating derivatized carbon nanotubes is lightweight and reusable. In summary, functionalization of carbon nanomaterials opens new avenues for processing and applications ranging from biomedicine to radiation sensing in space.

The design, construction and characterisation of a novel, arrayed, open-access optical microcavity is described. Included in this thesis are the precise fabrication details, making use of the focused ion beam. A technique for analysing and optimising the microcavities constructed, making use of an atomic force microscope is also included. Results from the optical characterisation of the fabricated microcavities are presented, including quality factors of around 104, and fitnesses of around 400. The optical analysis then progressed onto coupling colloidal semiconductor nanocrystals to the microcavity modes. This yielded room temperature Purcell enhancements, single particle sensing, and also allowed for the characterisation of a second iteration of cavities. This improved set was shown to achieve fitnesses in excess of 1800 and quality factors with a lower limit of 15000. The optical identification of single NV centres in nanodiamond is discussed, along with the development of an optical apparatus to couple them to microcavities at cryogenic temperatures. Finally several results from finite difference time domain simulations will be presented, showing ultimate mode volumes of less than 0.5 cubic wavelengths are possible for this approach.

To fully exploit the capability of NV centers in diamond as magnetic sensors and quantum bits, the optimum production recipe as well as the method to enhance its optical performance has been studied in this work. The NV centers in bulk diamond were prepared by ion implantation and electron irradiation, and the optimum dose and temperature are found by comparing its optical and magnetic performance both experimentally and theoretically. In addition, the enhancement of optical performance and size characterization of NV centers in nanodiamonds will be discussed in this work.

La capacité à cartographier le champ magnétique à l'échelle nanométrique serait un atout crucial pour étudier les propriétés magnétiques des solides ainsi que certains phénomènes de transport, mais aussi pour des études fondamentales en biologie. Cette thèse porte sur la réalisation d'un microscope de champ magnétique d'un genre nouveau, qui promet une résolution spatiale de quelques nanomètres, une sensibilité de l'ordre du nanotesla, et fonctionne aux conditions ambiantes. Ce microscope est basé sur le défaut azote-lacune du diamant, dont les propriétés quantiques peuvent être exploitées pour en faire un magnétomètre ultrasensible de taille atomique. Dans un premier temps, nous présenterons le fonctionnement et la réalisation du microscope à défaut azote-lacune, qui consiste essentiellement en un microscope à force atomique sur la pointe duquel un nanocristal de diamant est attaché. Nous testerons le microscope en imageant le champ de fuite généré par un cœur de vortex dans un microdisque ferromagnétique. Dans un second temps, nous appliquerons le microscope à l'étude de couches ferromagnétiques ultraminces. Ces systèmes présentent un intérêt à la fois fondamental, les effets d'interfaces restant encore largement inexplorés à ce jour, et technologique, puisqu'ils sont à la base de propositions pour la réalisation de nouvelles mémoires magnétiques à basse consommation d'énergie. Nous étudierons d'abord la nature des parois de domaines dans ces couches ultraminces, ce qui nous permettra de révéler l'existence d'une interaction Dzyaloshinskii-Moriya d'origine interfaciale dans certains échantillons. Nous étudierons ensuite les sauts nanométriques d'une paroi de domaine induits par l'agitation thermique. Nous démontrerons en particulier le contrôle de ces sauts par un laser, ce qui nous permettra de visualiser et explorer le paysage énergétique de la paroi. / The ability to map the magnetic field at the nanometer scale would be a crucial advance to study the magnetic properties of solids as well as some transport phenomena, but also for fundamental studies in biology. This thesis deals with the realisation of a magnetic field microscope of a new kind, which promises a spatial resolution down to a few nanometres, a sensitivity of the order of a few nanoteslas, and operates under ambient conditions. This microscope is based on the nitrogen-vacancy defect in diamond, whose quantum properties can be harnessed to make an ultrasensitive, atomic-size magnetometre. In the first part, we will present the basic principles and the realisation of the nitrogen-vacancy defect microscope, which consists essentially in an atomic force microscope on the tip of which a diamond nanocrystal is grafted. We will test the microscope by imaging the stray field generated by a vortex core in a ferromagnetic microdisk. In the second part, we will apply the microscope to the study of ultrathin ferromagnets. These systems are interesting both from the physical point of view, as interface effects have been little explored so far, and for technology, as they are the cornerstone of several proposals for realising novel magnetic memory devices with low energy consumption. We will first study the nature of domain walls in these ultrathin ferromagnets, which will enable us to reveal the existence of an interface-related Dzyaloshinskii-Moriya interaction in some samples. Next, we will study the nanometric jumps of a domain wall induced by thermal fluctuations. In particular, we will demonstrate control over these jumps using a laser, which will allow us to visualise and explore the wall's energy landscape.