No description available.

Ce travail de recherche pluridisciplinaire a consisté en l'étude de cellules photovoltaïques organiques à base de nouveaux copolymères à blocs de type rigide-flexible. L'idée était de proposer une alternative aux mélanges donneur/accepteur, dont la morphologie en film est très difficile à contrôler, en élaborant de nouveaux matériaux conjugués capables de s'auto-organiser et de créer une nano-structuration de la couche active, permettant ainsi d'optimiser certains paramètres du processus photovoltaïque (dissociation de l'exciton, conduction des charges vers les électrodes). La première étape a consisté à développer une synthèse simplifiée et versatile de copolymères constitués d'un bloc conjugué donneur (poly(3-hexylthiophène), d'un bloc flexible polystyrène, et d'un accepteur d'électron (C60). La seconde étape a consisté à caractériser ces matériaux originaux en tant que couche active ou compatibilisants dans des dispositifs photovoltaïques organiques et ainsi montrer leur potentiel. / This multidisciplinary work deals with the study of organic photovoltaic cells based on new rod-coil block copolymers. The aim was to replace donor/acceptor blends which are currently limited by poor control over their thin-film morphology. It was expected that the new materials may self-assemble to give a nano-structuration of the active layer, and thereby optimize the principal physical photovoltaic processes, namely exciton separation and conduction of charge-carriers through the film to the electrodes. A versatile and simplified synthesis of rod-coil copolymers consisting of a donor conjugated block [poly(3-hexylthiophene], a flexible block (polystyrene) and an electron acceptor (C60) was developed. The characterization of the new materials demonstrated their potential as an active layer or compatibilizer in photovoltaic devices.

La production d’énergie avec des cellules photovoltaïques organiques (OPV) est une des applications les plus prometteuses des semi-conducteurs organiques, en raison de leur compatibilité avec les substrats flexibles permettant des produits légers, peu chers et décoratifs. Pendant longtemps, poly(3-hexylthiophène) (P3HT) a été le polymère de choix dans l’OPV combiné au [6,6]-phényl-C61-butanoate de méthyle (PC61BM) comme accepteur. Toutefois, des recherches récentes ont porté sur des polymères avec meilleures absorption et processabilité, qui peuvent assurer des rendements et des durées de vie plus élevés. Des rendements de conversion en puissance (PCE) au-dessus de 11% ont récemment été démontrés. Cette thèse rapporte sur la synthèse et la caractérisation de deux séries de polymères dits à faible bande interdite, LBGs "push-pull" (ou donneur-accepteur), constitués de l'unité donneuse 4,4-bis(2-ethylhexyl)-5,5'-dithieno[3,2-b:2',3'-d]silole (DTS) combinée au 3,6-dithiophén-2-yl-2,5-dihydro-pyrrolo[3,4-c]pyrrole-1,4-dione (DPP) ou au 5,7-di(thiényl)thiéno[3,4-b]pyrazines (DTP), comme unité acceptrice. Toutes les molécules et les polymères ont été caractérisés chimiquement et leur propriétés optoelectroniques, morphologiques et photovoltaïques ont été determinées. La série DTS-DPP a été choisie parce qu'elle est représentative d'un grand nombre de polymères LBG et a fourni un modèle facilement accessible pour évaluer l'importance de la chaîne latérale utilisée sur leur propriétés optoélectroniques et thermiques. Les premières études sur les dispositifs à base de DTS-DPP:PC61BM ont été menées, pour déterminer les propriétés photovoltaïques. Le meilleur dispositif permet d’obtenir un PCE de 1,7% avec JSC de 5,9 mA cm-2, VOC de 0,54 V et FF de 0,58. La série DTS-DTP a été choisie pour la stabilité chimique élevée des deux unités et pour la facilité de substitution des groupes latéraux. La polymérisation a partiellement abouti, en donnant seulement des oligomères. La caractérisation chimique a pu être effectuée, mais leur application dans l’OPV n'a pas été explorée. En termes de stabilité, les mécanismes de défaillance électrique des dispositifs OPV ont été étudiés, montrant une méconnaissance de leur stabilité mécanique. Les contraintes caractéristiques de chaque couche mince présentes dans les cellules solaires organiques constituent la force motrice à l’origine de la délamination des interfaces faibles ou même leur decohésion, causant une perte de l'intégrité et des performances du dispositif. Une technique pour sonder les couches ou les interfaces fragiles dans les cellules solaires polymère:fullerene est présentée. Elle a été développée par l'établissement d'un nouveau set-up pour le test pull-off, développé en utilisant un dispositif à géométrie inverse, de structure verre/ITO/ZnO/P3HT:PC61BM/PEDOT:PSS/Ag. Les dispositifs délaminés ont montré que le point le plus faible est localisé à l'interface AL/HTL, en bon accord avec la littérature. La technique a été étendue en variant les deux couches sensibles, en utilisant differents polymères LBG pour l’AL (PSBTBT et PDTSTzTz) en combinaison avec deux formulations de PEDOT:PSS, CleviosTM HTL Solar à base d'eau et un nouveau HTL Solar 2 à base de solvant organique. Une différence entre la contrainte à la rupture des dispositifs avec différentes combinaisons de AL et HTL est visible, suggérant différents chemins de fracture, tel que confirmé par la caractérisation de surface et qui pourrait être corrélée avec la différence de comportement de la couche active avec les deux formulations de PEDOT:PSS. Une autre voie adoptée, a été d’introduire une couche d’interface de copolymère à blocs amphiphile afin d'améliorer la compatibilité des deux couches. Cette stratégie n'a pas abouti et la nouvelle architecture présente une adhésion réduite. La poursuite de l’amélioration des procédés de fabrication de ces dispositifs pourrait faire de cette nouvelle architecture, une alternative viable. / Organic photovoltaic (OPV) devices are one of the most promising applications of organic semiconductors due to their compatibility with flexible plastic substrates resulting in light weight, inexpensive and decorative products. For a long time poly(3-hexylthiophene) (P3HT) has been the polymer of choice in OPV devices in combination with [6,6]-phenyl-C61-butyric acid methylester (PC61BM) as acceptor. However, recent research has focused on polymers with improved absorbance and processability that can ensure higher efficiencies and longer lifetimes (Low BandGap polymers (LBGs)). This has been fully demonstrated with a power conversion efficiency (PCE) above 11%. This thesis reports synthesis and characterization of two series of so-called “push-pull” (or donor-acceptor) LBGs based on the donor unit 4,4′-bis(2-ethylhexyl)-5,5’-dithieno[3,2-b:2′,3′-d]silole (DTS) and either 3,6-dithiophen-2-yl-2, 5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione (DPP) or 5,7-di(thienyl)thieno[3,4-b]pyrazines (DTP), as acceptor unit. All π-conjugated molecules and polymers were characterized by chemical investigation and their optoelectronic, morphological, and photovoltaic properties are reported. The DTS-DPP series was chosen because representative of a large number of LBG polymers and provided an easily accessible and useful template to discover the importance of the type of side-chain used on the polymer optoelectronic and thermal properties. First studies on DTS-DPP:PC61BM devices have been conducted, in order to investigate any effect on their photovoltaic properties. The best device obtained had a PCE of 1.7% with JSC of 5.9 mA•cm-2, VOC of 0.54 V and FF of 0.58. The DTS-DTP series was chosen for the high stability of the two units and for the ease of substitution of the side-groups. The synthesis was partially successful and only oligomers were obtained. Nonetheless, chemical characterization was performed but their application in OPV was not explored. In terms of device stability, the electrical failure mechanisms in OPV devices have been investigated, while little is known about their mechanical stability. The characteristic thin film stresses of each layer present in organic solar cells, in combination with other possible fabrication, handling and operational stresses, provide the mechanical driving force for delamination of weak interfaces or even their de-cohesion, leading to a loss of device integrity and performance. A technique to probe weak layers or interfaces in inverted polymer:fullerene solar cells is presented. It was developed by establishing a new set-up for the pull-off test. The technique was developed using inverted device, with the structure glass/ITO/ZnO/P3HT:PC61BM/PEDOT:PSS/Ag. The delaminated devices showed that the weakest point was localized at the active layer/hole transporting layer interface, in good agreement with the literature. The technique was extended varying both sensitive layers, using different p-type low bandgap (co)polymers for the active layer (PSBTBT and PDTSTzTz) in combination with two different PEDOT:PSS formulations, the water based CleviosTM HTL Solar and a new organic solvent based HTL Solar 2. The half-devices produced upon destructive testing have been characterized by contact angle measurement, AFM and XPS to locate the fracture point. A difference in the stress at break for devices made with different combinations of active and hole transporting layers is visible, suggesting different fracture paths, as confirmed by surface characterization and could be correlated to the different behavior of the active layer with the two PEDOT:PSS formulations. Another solution adopted, it had been the introduction of amphiphilic block-copolymer interlayer to enhance the compatibility of the two layers. This strategy was not successful and the new architecture showed reduced adhesion strength. Further development of device processing could make this new architecture a viable alternative.

Diploma thesis deals with the use of organic materials in photovoltaic applications and the study of their electric and dielectric properties. The theoretical part of thesis deals issue of the use of organic polymeric materials in photovoltaics and their advantages and disadvantages. Next are the results of various studies of organic solar cells by other authors. In the practical part of the work are shown experimental results (volt-ampere characteristics and impedance spectra) of samples of organic semiconductors and their evaluation.

This work investigates fabrication methods of nickel oxide thin films and their use in organic electronics. Two fabrication techniques were studied: UV-ozone oxidation of pure nickel films and reactive RF magnetron sputtering. The former was used to produce Ni/Ni2O3 bi-layer anodes to use as a substitute for the de facto standard ITO anode. OLEDs fabricated using Ni/Ni2O3 bi-layer anodes exhibited comparable device performance to standard ITO devices. UV-ozone oxidation was also used to fabricate Ni2O3 buffer layers for OPVs. Solar cells fabricated using Ni2O3 coated ITO exhibited an enhanced power conversion efficiency of up to 90%. RF magnetron sputtering was used to produce NiOx buffer layers with tunable conductivity and optical transparency for OPVs. Solar cells fabricated using NiOx coated ITO exhibited an enhanced power conversion efficiency of up to 60%. Nickel oxide films have been characterized with various techniques: sheet resistance measurements, optical transmission, XPS, UPS, AFM, and TEM.

This work investigates fabrication methods of nickel oxide thin films and their use in organic electronics. Two fabrication techniques were studied: UV-ozone oxidation of pure nickel films and reactive RF magnetron sputtering. The former was used to produce Ni/Ni2O3 bi-layer anodes to use as a substitute for the de facto standard ITO anode. OLEDs fabricated using Ni/Ni2O3 bi-layer anodes exhibited comparable device performance to standard ITO devices. UV-ozone oxidation was also used to fabricate Ni2O3 buffer layers for OPVs. Solar cells fabricated using Ni2O3 coated ITO exhibited an enhanced power conversion efficiency of up to 90%. RF magnetron sputtering was used to produce NiOx buffer layers with tunable conductivity and optical transparency for OPVs. Solar cells fabricated using NiOx coated ITO exhibited an enhanced power conversion efficiency of up to 60%. Nickel oxide films have been characterized with various techniques: sheet resistance measurements, optical transmission, XPS, UPS, AFM, and TEM.

The ophthalmic trigeminal placode (opV) is the birth place of one cell type of sensory neurons contributing to the trigeminal ganglion. Signals from the neural tube induce placodal identity within the surface ectoderm. Specified opV placode cells then up-regulate neuron differentiation markers and migrate to the ganglion. Several molecular pathways have been shown to act in opV placode cell development. Despite this, signals that specify individual neurons from within the opV placode remain unknown. However, it is known that components of the Notch signaling pathway are expressed in the opV placode. I tested the role of Notch signaling in opV placode development by separately inhibiting and over-activating the pathway. Using DAPT, an inhibitor of gamma-secretase, I inhibited Notch signaling in 13-15 somite stage chick embryo heads. Attenuated Notch signaling caused increased neuronal differentiation of opV cells at 13-15 somites. I also observed an increase in migratory opV placode (Pax3+) cells in the mesenchyme and expression of neuronal marker Islet1 in the ectoderm. Further, I activated Notch signaling by misexpressing the Notch intracellular domain (NICD) by in ovo electroporation of 10-12 somite stage chick embryos. This resulted in Pax3+ targeted cells failing to differentiate and remain instead in the ectoderm. Thus, Notch/Delta signaling plays an important role in selecting ophthalmic trigeminal cells to differentiate and migrate to the trigeminal ganglion.

This dissertation focuses on the design, synthesis, and characterization of a variety of organic dyes, semiconducting materials, and surface redox-active modifiers of potential interest to organic-based emerging photovoltaics. A discussion of the materials’ optoelectronic properties, their ability to modify and promote electron transfer through an organic/transparent conducting-oxide interface, and finally their effect on the photovoltaic properties of devices utilizing them as light-harvesters is provided where relevant. The first two research chapters discuss mono-chromophoric asymmetric squaraine-based sensitizers and covalently linked, dual-chromophoric, porphyrin-squaraine sensitizers as light absorbers in dye-sensitized solar cells (DSSCs), in an attempt to address two problems often encountered with DSSCs utilizing this class of near infra-red sensitizers; The lack of panchromatic absorption and aggregation on the surface. Also, this dissertation discusses the design and synthesis of asymmetric perylene diimide phosphonic acid (PDI-PA) redox-active surface modifiers, and reports on the electron-transfer rates and efficiencies across the interface of an ITO electrode (widely used in organic-electronic devices) modified with these perylene diimides. Finally two series of hole-transport materials based on oligothiophenes and benzodithiophenes are reported: optoelectronic properties and preliminary performance of organic photovoltaic (OPV) devices fabricated with them is discussed.

In this dissertation, we investigate two emerging strategies for enhancing the performance of organic photovoltaics. The first takes advantage of a process called singlet exciton fission, and the second embodies an exodus from the fullerene electron acceptors prominent in organic solar cells. Indeed, this versatile class of tunable small molecules are aptly termed nonfullerene acceptors. However, both strategies would benefit from a greater understanding of underlying principles. Singlet exciton fission is a photon-multiplying process in which a singlet exciton from a high-energy absorbed photon splits into two triplet excitons. The process could significantly reduce energy lost to heat in photovoltaic devices, but its mechanisms are still misunderstood. One model involves direct coupling between the singlet and triplet states, and another model involves an intermediate charge transfer state. Transient absorption spectroscopy allowed us to examine singlet fission in films of pentacene, fluorinated pentacene, and coevaporated blends of various mixing ratios. We directly observe an intermolecular charge transfer state during singlet fission in solid films of coevaporated pentacene and peruoropentacene, which supports the model of charge transfer state-mediated singlet fission. Furthermore, we successfully induced singlet fission in one blend by directly exciting the charge transfer state below the bandgap. We use various types of steady state and time-resolved spectroscopy to characterize two types of nonfullerene electron acceptors. The first type is a group of tetraazabenzodiuoranthene diimide (BFI) dimers and a BFI monomer. The BFI dimers were designed to have twisted, nonplanar 3-dimensional structures and have helped achieve power conversion efficiencies of over 8% in organic solar cells. The other type of nonfullerene acceptor is a calamitic small molecule, and we consider the BAF-4CN electron acceptor, which has also been used in a solar cell whose efficiency exceeded 8%. Spectroscopic studies give insight into the performances of these nonfullerene devices in relation to fullerene-derivative counterparts. We find that the nonfullerene blends suffer from more geminate charge recombination. However, despite this drawback, in some cases, slower rates of nongeminate recombination may lead to successful power conversion efficiencies in nonfullerene solar cells.

No description available.