Pick-up lines are a "ritual that tries to turn strangers into lovers" (Murray, 1985, p.17). By studying how pick-up lines are perceived by the population, we might learn how the phenomenon of short- or long-term mating is initiated. By taking into account mating strategies, mate value, attractiveness, and flirting strategies, a pattern of behaviors and reactions may be observed. This study examines perceived pick-up line appropriateness and effectiveness when the attractiveness of the man delivering them varies. To test the effectiveness of 2 different types of pick-up lines, an online survey featuring 1 of 4 videos was administered. Results indicated that a humorous pick-up line was perceived as more effective and favorable than a slightly insulting one. An attractive man was perceived to be more communicatively competent than an unattractive man. Men, regardless of attractiveness, were perceived as more socially attractive when using a humorous pick-up line.

In this study, we consider the Air Cargo Scheduling Problem based on a real life application. The aim is to move cargo and passengers that have different priorities and delivery time window, from a number of origin airports to destination airports by means of a transportation system. The system has predefined carrier routes and a heterogeneous fleet of aircraft. The problem is formulated as a heterogeneous vehicle, multi commodity, pick-up, and delivery network flow problem with a large set of system specific constraints. The proposed model determines set of movement requirements assigned on each route leg and number and type of aircraft assigned for each route in a reasonable amount of time. The model is tested with the real and generated data and the results are compared with the current methodology under different scenarios. The model produced better results in a short amount of time compared to the current methodology.

In this study we discuss the Vehicle Routing Problem with multiple use of vehicles (VRPM). In this variant of the routing problem the vehicles may replenish at any time at the depot. We present a detailed review of existing literature and propose two mathematical models to solve the VRPM. For these two models and their several variants we provide computational results based on the test problems taken from the literature. We also discuss a case study in which we are simultaneously dealing with side constraints such as time windows, working hour limits, backhaul customers and a heterogeneous vehicle fleet.

Pós fluxantes são escórias sintéticas utilizadas no processamento do aço via lingotamento contínuo com o objetivo de promover maior qualidade superficial ao produto lingotado. Para tanto, os pós fluxantes desempenham as seguintes funções: (i) promoção do isolamento térmico e químico do aço, (ii) absorção das inclusões nãometálicas provenientes do aço, (iii) promoção da lubrificação do molde e (iv) controle da transferência de calor entre o aço e o molde. O bom desempenho de cada função está diretamente relacionado às propriedades físicas e químicas que os pós apresentam, as quais são funções de sua composição química. Durante o processo de lingotamento, os pós fluxantes sofrem alterações em sua composição original proporcionadas por diferentes mecanismos que afetam as propriedades dos pós fluxantes. Um dos principais mecanismos responsáveis pelas alterações da composição das escórias é a interação química que ocorre entre o aço líquido e o pó fluxante fundido. Nesse trabalho foram realizadas simulações via aplicativo termodinâmico FactSage com o intuito de avaliar as interações entre metal líquido e escória. Três sistemas simples para a escória – um ternário (CaO-Al2O3-SiO2), um quaternário (CaO-Al2O3-SiO2-MgO) e um quinário (CaO-Al2O3-SiO2-MgO-Na2O) – e uma liga de Fe saturada em alumínio e oxigênio – 0,1%, 0,01% e 0,001% de Al – foram escolhidos para a realização das simulações, visando avaliar o incremento de Al2O3 da escória através da interação entre o alumínio dissolvido no ferro e a sílica presente na escória. O aumento do teor de alumina na escória foi quantificado para cada um dos três sistemas estudados em função do teor de Al e da razão S/M (kg de pó fluxante/t de metal líquido). Foram realizadas curvas de resfriamento para as escórias – que sofreram alterações em sua composição – para avaliar a influência da variação da composição sobre o comportamento de solidificação destas, baseadas em diagramas pseudobinários. Por fim, foram realizados cálculos de viscosidade para estas escórias através do modelo IRSID, para analisar a influência da composição sobre a viscosidade. Mostrou-se, para as condições escolhidas, que as alterações da composição química das escórias devido às interações entre metal líquido e escória são significativas, afetando as propriedades dos pós fluxantes, tais como seu comportamento de solidificação e sua viscosidade. / Mold powders are synthetic slags used in steel processing via continuous casting in order to promote greater surface quality to casting product. Thus, the mold powders perform the following functions: (i) promotion of the thermal and chemical insulate of steel, (ii) absorption of non-metallic inclusions from the steel, (iii) promotion of the lubrication of the mold and (iv) control of the heat transfer between steel and mold. The good performance of each function is directly related to physical and chemical properties presented by the powders, which are functions of their chemical compositions. During casting process, the mold powders undergo changes in their original composition provided by different mechanisms that affect the properties of mold powders. One of the main mechanisms responsible for changes in the composition of the slag is the chemical interaction that occurs between liquid steel and molten mold powders. In this work, simulations were carried out via thermodynamics software FactSage with the purpose of evaluating the interactions between the liquid metal and slag. Three simple systems – a ternary (CaO-Al2O3-SiO2), a quaternary (CaO-Al2O3- SiO2-MgO) and a quinary (CaO-Al2O3-SiO2-MgO-Na2O) – and a Fe alloy saturated with aluminum and oxygen – 0,1%, 0,01% and 0,001% Al – were chosen to perform the simulations in order to evaluate the increase of Al2O3 in slag through the interaction between the dissolved aluminum in iron and silica present in the slag. The increase of alumina content in the slag was quantified for each of the three systems studied as a function of Al content and the ratio S/M (mold powder kg/t liquid metal). Cooling curves were performed for slags – that suffered changes in their composition – to assess the influence of the composition variation on the behavior of slags, based on the pseudo-binary diagrams. Calculations of viscosity for these slags through the IRSID model to analyze the influence of chemical composition on the viscosity were performed. For the conditions chosen, it was shown that changes in chemical composition of the slag due to interactions between liquid metal and slag are significant, affecting the properties of fluxing powders, such as the solidification behavior and viscosity.

Pós fluxantes são escórias sintéticas utilizadas no processamento do aço via lingotamento contínuo com o objetivo de promover maior qualidade superficial ao produto lingotado. Para tanto, os pós fluxantes desempenham as seguintes funções: (i) promoção do isolamento térmico e químico do aço, (ii) absorção das inclusões nãometálicas provenientes do aço, (iii) promoção da lubrificação do molde e (iv) controle da transferência de calor entre o aço e o molde. O bom desempenho de cada função está diretamente relacionado às propriedades físicas e químicas que os pós apresentam, as quais são funções de sua composição química. Durante o processo de lingotamento, os pós fluxantes sofrem alterações em sua composição original proporcionadas por diferentes mecanismos que afetam as propriedades dos pós fluxantes. Um dos principais mecanismos responsáveis pelas alterações da composição das escórias é a interação química que ocorre entre o aço líquido e o pó fluxante fundido. Nesse trabalho foram realizadas simulações via aplicativo termodinâmico FactSage com o intuito de avaliar as interações entre metal líquido e escória. Três sistemas simples para a escória – um ternário (CaO-Al2O3-SiO2), um quaternário (CaO-Al2O3-SiO2-MgO) e um quinário (CaO-Al2O3-SiO2-MgO-Na2O) – e uma liga de Fe saturada em alumínio e oxigênio – 0,1%, 0,01% e 0,001% de Al – foram escolhidos para a realização das simulações, visando avaliar o incremento de Al2O3 da escória através da interação entre o alumínio dissolvido no ferro e a sílica presente na escória. O aumento do teor de alumina na escória foi quantificado para cada um dos três sistemas estudados em função do teor de Al e da razão S/M (kg de pó fluxante/t de metal líquido). Foram realizadas curvas de resfriamento para as escórias – que sofreram alterações em sua composição – para avaliar a influência da variação da composição sobre o comportamento de solidificação destas, baseadas em diagramas pseudobinários. Por fim, foram realizados cálculos de viscosidade para estas escórias através do modelo IRSID, para analisar a influência da composição sobre a viscosidade. Mostrou-se, para as condições escolhidas, que as alterações da composição química das escórias devido às interações entre metal líquido e escória são significativas, afetando as propriedades dos pós fluxantes, tais como seu comportamento de solidificação e sua viscosidade. / Mold powders are synthetic slags used in steel processing via continuous casting in order to promote greater surface quality to casting product. Thus, the mold powders perform the following functions: (i) promotion of the thermal and chemical insulate of steel, (ii) absorption of non-metallic inclusions from the steel, (iii) promotion of the lubrication of the mold and (iv) control of the heat transfer between steel and mold. The good performance of each function is directly related to physical and chemical properties presented by the powders, which are functions of their chemical compositions. During casting process, the mold powders undergo changes in their original composition provided by different mechanisms that affect the properties of mold powders. One of the main mechanisms responsible for changes in the composition of the slag is the chemical interaction that occurs between liquid steel and molten mold powders. In this work, simulations were carried out via thermodynamics software FactSage with the purpose of evaluating the interactions between the liquid metal and slag. Three simple systems – a ternary (CaO-Al2O3-SiO2), a quaternary (CaO-Al2O3- SiO2-MgO) and a quinary (CaO-Al2O3-SiO2-MgO-Na2O) – and a Fe alloy saturated with aluminum and oxygen – 0,1%, 0,01% and 0,001% Al – were chosen to perform the simulations in order to evaluate the increase of Al2O3 in slag through the interaction between the dissolved aluminum in iron and silica present in the slag. The increase of alumina content in the slag was quantified for each of the three systems studied as a function of Al content and the ratio S/M (mold powder kg/t liquid metal). Cooling curves were performed for slags – that suffered changes in their composition – to assess the influence of the composition variation on the behavior of slags, based on the pseudo-binary diagrams. Calculations of viscosity for these slags through the IRSID model to analyze the influence of chemical composition on the viscosity were performed. For the conditions chosen, it was shown that changes in chemical composition of the slag due to interactions between liquid metal and slag are significant, affecting the properties of fluxing powders, such as the solidification behavior and viscosity.

Pós fluxantes são escórias sintéticas utilizadas no processamento do aço via lingotamento contínuo com o objetivo de promover maior qualidade superficial ao produto lingotado. Para tanto, os pós fluxantes desempenham as seguintes funções: (i) promoção do isolamento térmico e químico do aço, (ii) absorção das inclusões nãometálicas provenientes do aço, (iii) promoção da lubrificação do molde e (iv) controle da transferência de calor entre o aço e o molde. O bom desempenho de cada função está diretamente relacionado às propriedades físicas e químicas que os pós apresentam, as quais são funções de sua composição química. Durante o processo de lingotamento, os pós fluxantes sofrem alterações em sua composição original proporcionadas por diferentes mecanismos que afetam as propriedades dos pós fluxantes. Um dos principais mecanismos responsáveis pelas alterações da composição das escórias é a interação química que ocorre entre o aço líquido e o pó fluxante fundido. Nesse trabalho foram realizadas simulações via aplicativo termodinâmico FactSage com o intuito de avaliar as interações entre metal líquido e escória. Três sistemas simples para a escória – um ternário (CaO-Al2O3-SiO2), um quaternário (CaO-Al2O3-SiO2-MgO) e um quinário (CaO-Al2O3-SiO2-MgO-Na2O) – e uma liga de Fe saturada em alumínio e oxigênio – 0,1%, 0,01% e 0,001% de Al – foram escolhidos para a realização das simulações, visando avaliar o incremento de Al2O3 da escória através da interação entre o alumínio dissolvido no ferro e a sílica presente na escória. O aumento do teor de alumina na escória foi quantificado para cada um dos três sistemas estudados em função do teor de Al e da razão S/M (kg de pó fluxante/t de metal líquido). Foram realizadas curvas de resfriamento para as escórias – que sofreram alterações em sua composição – para avaliar a influência da variação da composição sobre o comportamento de solidificação destas, baseadas em diagramas pseudobinários. Por fim, foram realizados cálculos de viscosidade para estas escórias através do modelo IRSID, para analisar a influência da composição sobre a viscosidade. Mostrou-se, para as condições escolhidas, que as alterações da composição química das escórias devido às interações entre metal líquido e escória são significativas, afetando as propriedades dos pós fluxantes, tais como seu comportamento de solidificação e sua viscosidade. / Mold powders are synthetic slags used in steel processing via continuous casting in order to promote greater surface quality to casting product. Thus, the mold powders perform the following functions: (i) promotion of the thermal and chemical insulate of steel, (ii) absorption of non-metallic inclusions from the steel, (iii) promotion of the lubrication of the mold and (iv) control of the heat transfer between steel and mold. The good performance of each function is directly related to physical and chemical properties presented by the powders, which are functions of their chemical compositions. During casting process, the mold powders undergo changes in their original composition provided by different mechanisms that affect the properties of mold powders. One of the main mechanisms responsible for changes in the composition of the slag is the chemical interaction that occurs between liquid steel and molten mold powders. In this work, simulations were carried out via thermodynamics software FactSage with the purpose of evaluating the interactions between the liquid metal and slag. Three simple systems – a ternary (CaO-Al2O3-SiO2), a quaternary (CaO-Al2O3- SiO2-MgO) and a quinary (CaO-Al2O3-SiO2-MgO-Na2O) – and a Fe alloy saturated with aluminum and oxygen – 0,1%, 0,01% and 0,001% Al – were chosen to perform the simulations in order to evaluate the increase of Al2O3 in slag through the interaction between the dissolved aluminum in iron and silica present in the slag. The increase of alumina content in the slag was quantified for each of the three systems studied as a function of Al content and the ratio S/M (mold powder kg/t liquid metal). Cooling curves were performed for slags – that suffered changes in their composition – to assess the influence of the composition variation on the behavior of slags, based on the pseudo-binary diagrams. Calculations of viscosity for these slags through the IRSID model to analyze the influence of chemical composition on the viscosity were performed. For the conditions chosen, it was shown that changes in chemical composition of the slag due to interactions between liquid metal and slag are significant, affecting the properties of fluxing powders, such as the solidification behavior and viscosity.

This thesis offers an overview of the representational politics of the online antifeminist community known as the ‘manosphere’. It analyzes how gender and gender politics are represented in the discourse, with an eye to how traditional gender constructs, and traditional gendered norms and inequalities, are reproduced. This project—the first study to focus exclusively on the manosphere—contributes to our understanding of the community in two ways; it addresses a significant gap in the literature on the topic, and it tests the accuracy of the ‘conventional wisdom’ on the manosphere. Using mixed-methods critical discourse analysis, the study analyzed the discourse of the two primary subcultures of the community, and found that traditional gender norms and relations are reproduced therein, and that for the most part the conventional wisdom is accurate: femininity and women are disparaged, masculinity is imagined to be ‘in crisis’ (constantly under siege by feminizing forces), and feminism is represented as hypocritical and oppressive.

Gamification, immersion and flow are well known within game design, and more frequently considered within the development of educational applications. The simplicity and comprehensibility of an educational game can result into improved learning and a more enjoyable experience, as the focus on the gameplay increases with less instructions and a more straightforward approach for playing and learning. The aim is to focus on the relevant areas in order to implement a pick-up-and-play gamification geography game for learnability, as well as understanding the considerations when developing an educational application of this kind. Moreover, the work mainly focuses on the implementation of relevant and central game design elements, including animations, correlated to the researched areas. Given the information and the implementation, evaluation and analyzation were performed using Think-Aloud protocol combined with two scripted tests. Additionally, two slightly modified questionnaires were used, the Game Experience Questionnaire and User Engagement Scale Short Form, as a completion for any uncertainties or missing information after the Think-Aloud protocol. The work has brought up the importance of understanding the correlation between the relevant areas and the game design elements, as well as discussed these in context of this work. Moreover, it describes the importance of the well-balanced usage of animations, which improves the dynamic and engaging experience, while also contributing to a clearer feedback. The Think-Aloud protocol have shown being very useful and effective for the evaluation and analyzation. However, the questionnaires were only useful to some extent, but overall ambiguous and confusing, mainly because of the short playtime by the participants, as well as the difficulties in interpreting the assumptions.

The aim of this essay has been to investigate the use and traditios of double weaves during the old Vasa period in Sweden, the so called Ryssväv (Russian Weave). Questions focused are: what was the magnitude of the double weaves produced in Sweden, was there a considerable import from Finland, how were the double weaves used, did it differ between bigger and smaller royal estates, was the building type of importance for the furnishing? Ryssväv has been categorized both as an "everyday article", and as art weave, but what was its status, and what status did the craftsmen have compared to other craftsmen? The preserved double weaves from the late medieval period in Sweden-Finland has served as a direct source for my examination and as such the theory and method of my work has been Material culture. Most likely the double weaves of the Vasa period were similar, in both quality and esthetics. My primary sources have been fatbursräkenskaper (household accounts) from two royal estates, Rävsnäs and Gripsholm. In these accounts I have tried to find documentation telling something about the use ad status of ryssväv, and about the craftsmen who made them. The examination demonstrates that the use and production differed between Gripsholm and Rävsnäs; it is likely that this has to do with the building type, stone or wood. About the status of the craftsmen, one example is that of a female weaver recieving more money, for her ryssväv, than a male painter, for his paintings in the king's chamber. What has been claimed by some scientists, that most of the double weaves from the Vasa period, were imported from Finland, can be incorrect, according to my investigation. This hypothesis is left for future research to investigate.

La producción de embriones mediante la recuperación de ovocitos inmaduros por ovum pick up (OPU), y su posterior maduración, fecundación y cultivo en el laboratorio in vitro, presenta numerosos beneficios para optimizar el potencial reproductivo, tanto de hembras como de machos. Además, frente a la superovulación convencional mediante tratamiento hormonal y la recogida de embriones in vivo, la producción in vitro de embriones (PIVE) con ovocitos de OPU ofrece considerables ventajas. Sin embargo, actualmente la PIVE continua siendo ineficiente e incapaz de producir embriones de calidad similar a los in vivo, lo cual ha limitado una aplicación más amplia de esta tecnología. Así pues, el objetivo de esta tesis fue la optimización de la PIVE en ganado vacuno, condicionado por las peculiaridades y deficiencias de la PIVE cuando los ovocitos son recuperados por la técnica de OPU. Con este fin, cinco experimento se llevaron a cabo en esta tesis. En el primero de ellos se estudió el efecto del fluido oviductal bovino (FOb) sobre el desarrollo y la calidad embrionaria (Experimento 1). Las fases del proceso de PIVE en las cuales el cultivo de ovocitos/embriones, bien individualmente o bien en número reducido, pudiera perjudicar el posterior desarrollo hasta el estadio de blastocisto y/o a su calidad, se estudiaron en el Experimento 2. En el Experimento 3 se testó si el desarrollo y la calidad de embriones cultivados in vitro en número reducido podría ser mejorada con la adición conjunta de factor de crecimiento epidérmico, insulina, transferrina y selenio (FCE-ITS) o por el sistema de cultivo de embriones llamado well of well (WOW). Las propiedades protectoras de la melatonina frente a los daños causados por el estrés oxidativo, subsecuentes de las condiciones de PIVE o de un estrés térmico durante la maduración ovocitaria, fueron evaluadas en el Experimento 4. Por último, en el Experimento 5 usamos ovocitos recolectados por OPU para evaluar el efecto del semen sexado sobre / Cebrián Serrano, A. (2013). Factors affecting the in vitro embryo production in cattle associated to ovum pick up sistem [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/27646