Yes / Interpolymer complex formation of poly(acrylic acid) with other macromolecules can occur via several mechanisms that vary depending on the pH. At low pH the protonated acid functional group can form bonds with both donor and acceptor moieties, resulting in desolvated structures consisting of two polymers. Complexes were formed in dilute solutions of PAA, functionalised with acenaphthylene, with a range of other polymers including: poly(NIPAM); poly(ethylene oxide) (PEO); poly(dimethylacrylamide) (PDMA); poly(diethyl acrylamide) (PDEAM) poly(vinyl alcohol) (PVA) and poly(vinyl pyrolidinone) (PVP). Fluorescence anisotropy was used to demonstrate complex formation in each case by monitoring the reductions in segmental motion of the chain as the complexes formed. Considerations of the molecular structures of the complexing moieties suggest that solvation energies and pKas play an important role in complex formation.

>Magister Scientiae - MSc / Peptides are among the main drugs which attract much attention because of their great potential in treating sexually transmitted diseases and other chronic diseases. There has been a major challenge of delivering these drugs in mucosal sites with low pH environment. The aim of this study is to synthesize acidic pH stable peptide loaded chitosan nanoparticles gels that could penetrate mucus layers covering the epithelial cells and kill HIV virus. Chitosan nanoparticles were synthesized by crosslinking method called Ionic gelation with Sodium tripolyphosphateTPP. / 2023

Yes / A low concentration poly(acrylamide) sensor has been developed which uses the segmental mobility of another polymer probe with a covalently attached fluorescent marker. Interpolymer complexation with poly(acrylic acid) leads to reduced segmental mobility which can be used to determine the concentration of polymer in solution. This technique could be useful in detecting the runoff of polymer dispersants and flocculants in fresh water supplies following water purification processes. / Funding for the research was kindly provided by the Engineering and Physical Sciences Research Council (EPSRC).

Yes / Hydroxyapatite and fluorhydroxyapatite (F)HA nanoparticles were synthesised in the presence of branched poly(acrylic acid)s (PAA) synthesised via reversible addition–fragmentation chain transfer polymerisation and compared to those synthesised in the presence of linear PAA. Analysis of the resulting nanoparticles using Fourier transform infrared spectroscopy, powder X-ray diffraction and transition electron microscopy found that the polymer was included within the nanoparticle samples and affected their morphology with nanoparticles synthesised in the presence of branched PAA being more acicular and smaller overall.

Yes / Functional crosslinked hydrogels were prepared from 2-hydroxyethyl methacrylate (HEMA) and acrylic acid (AA). The acid monomer was incorporated both via copolymerization and chain extension of a branching, reversible addition–fragmentation chain-transfer agent incorporated into the crosslinked polymer gel. The hydrogels were intolerant to high levels of acidic copolymerization as the acrylic acid weakened the ethylene glycol dimethacrylate (EGDMA) crosslinked network. Hydrogels made from HEMA, EGDMA and a branching RAFT agent provide the network with loose-chain end functionality that can be retained for subsequent chain extension. Traditional methods of surface functionalization have the downside of potentially creating a high volume of homopolymerization in the solution. Branching RAFT comonomers act as versatile anchor sites by which additional polymerization chain extension reactions can be carried out. Acrylic acid grafted onto HEMA–EGDMA hydrogels showed higher mechanical strength than the equivalent statistical copolymer networks and was shown to have functionality as an electrostatic binder of cationic flocculants.

Yes / Interpolymer complexes of homopolymer macromolecules are often described as ‘laddered’ or ‘ribbon’ type structures. The proposition of the existence of these ladder structures seems to us not reasonable and here we examine this hypothesis. To address this we have used polymers enabled for Förster Energy Transfer (FRET). Chromophores bound to a macromolecular backbone can transfer energy across short distances via FRET. The close binding of poly(acrylamide) and poly(acrylic acid) interpolymer complex formation at low pH forms a structure compact enough for significant energy transfer to occur between different chains containing naphthalene and anthracene labels. In the context of the proposition that ladder polymers can form it was surprising that the distance between labels on the same polymer back-bone was equivalent regardless of whether the polymer was complexed or not. The data indicated that the bicomponent structure may be more compact than previously supposed: I.e. the complexes are not ladders composed of extended chains. This evidence suggests formation not of ordered ‘ladder’ systems but colloidal ‘co-globules’. / This work was carried out in part thanks to an EPSRC CASE funded PhD studentship at the University of Sheffield, sponsored by SNF (UK) Ltd.

Doctor of Philosophy / The kinetics of electrosterically stabilized emulsion systems was studied. The aim of this was to understand the impact that steric and electrosteric stabilizers have on the kinetics of particle growth and particle formation in the area of emulsion polymerization. The well-established mechanisms that govern these processes for emulsions stabilized by conventional low molecular weight surfactants were used as a reference point for comparative purposes. Model latexes were synthesized that comprised of a poly(styrene) core stabilized by a corona of poly(acrylic acid). The advent of successful controlled radical polymerization techniques in heterogeneous media (via RAFT polymerization) allowed for latexes to be synthesized under molecular weight control. For the first time, the degree of polymerization of the stabilizing block on the particle surface was able to be controlled and verified experimentally using mass spectrometry techniques. Three latexes were made with different average degrees of polymerization of the stabilizing block; five, ten and twenty monomer units respectively. A methodology was developed to remove the RAFT functionality from the polymer chains present in the emulsion while retaining the desired particle morphology. Oxidation with tertbutylhydroperoxide (TBHP) was proven to be successful at eliminating the living character provided by the thiocarbonyl end-group. Extensive dialysis and cleaning of the latex was performed to ensure no residual TBHP or reaction by-products remained. Latexes with poly(styrene) cores were chosen for this work as poly(n-butyl acrylate) latexes were shown to be influenced by chain transfer to polymer, providing an additional kinetic complication. The three electrosterically stabilized emulsions were used as seed latexes in carefully designed kinetic experiments to measure the rate of polymerization as a function of time. Two independent techniques (chemically initiated dilatometry and γ-relaxation dilatometry) were used to measure the rate coefficients of radical entry (ρ) and exit (k) in these systems – the two parameters that essentially govern the rate of particle growth. The latexes were chosen such that they satisfied ‘zero-one’ conditions (i.e. that any given latex particle contains at most one growing radical at any given time) in order to simplify data analysis. Three different chemical initiators were used, each yielding a radical with a different electric charge. Results from γ-relaxation experiments demonstrated that the three electrosterically stabilized latexes gave very long relaxation times when removed from the radiation source, ultimately yielding very small k values. These values were up to a factor of 10 smaller than that predicted by the ‘transfer-diffusion’ model for exit for particles of that size. This reduction was attributed to a ‘restricted diffusion’ effect, where the exiting monomeric radical has to diffuse through a dense layer of polymer on the particle surface, where its mobility will be restricted. Modification of the Smoluchowski equation for diffusion-controlled adsorption/desorption to account for this postulate led to the development of a model that gave excellent semi-quantitative agreement with experiment. Chemically initiated dilatometric experiments (using three different types of initiator) gave the unusual result of very low reaction rates and low steady-state values of 'nbar', the average number of radicals per particle. Using the standard kinetic equations for styrene-based systems (where it is assumed that an exited monomeric radical undergoes re-entry), this led to the calculation of impossibly small values of the entry rate coefficient ρ (far below any background or ‘thermal’polymerization rate). However upon removing the assumption of re-entry and assuming that exited radicals undergo termination, the obtained values of ρ were in almost perfect agreement with the values predicted from the ‘control by aqueous phase growth’ entry mechanism. This unexpected result was attributed to chemical reaction with the poly(acrylic acid) stabilizers through chain transfer to polymer (via hydrogen-atom abstraction). This postulate was verified by separate experiments that demonstrated that poly(acrylic acid) could act as a reasonably efficient chain transfer agent for styrene polymerization. The addition of poly(acrylic acid) to the aqueous phase of a conventionally stabilized emulsion also led to the rate reduction seen previously. NMR experiments demonstrated the existence of poly(acrylic acid-graft-styrene), which could only be formed through termination of a poly(styrene) chain with a poly(acrylic acid) chain bearing a mid-chain radical (as the product of a chain transfer reaction). These additional terms of transfer and termination were included in the governing kinetic equations of emulsion systems (the Smith-Ewart equations) to develop a model to account for the behaviour of electrosterically stabilized latexes. The ultimate fate of an exiting radical was now shown to be a competition between fates; successful desorption into the aqueous phase, or chemical reaction (through transfer or termination) within the hairy layer. These additional terms were shown to significantly reduce the theoretical value of nbar, and were in excellent agreement with experiment. For small electrosterically stabilized particles with a densely packed ‘hairy layer,’ it was seen that transfer/termination is the dominant loss mechanism as opposed to desorption. The developed model showed that as the particle size was increased, the dominant loss mechanism once again became successful desorption into the aqueous phase. The model was shown to give excellent agreement with experimental data from ‘uncontrolled’ emulsion systems. To explain the highly unusual secondary nucleation behaviour seen in systems such as these, it was postulated that beta-scission of a poly(acrylic acid) chain bearing a mid-chain radical is an important mechanistic step in the nucleation mechanisms of these systems. Modelling (both steady-state and time-dependent) gave good agreement with experiment with a minimal number of adjustable parameters. Theory (and supporting experimental evidence) demonstrated that this nucleation mechanism is only significant at high particle numbers; under other conditions the well-known ‘homogeneous nucleation’ mechanism is once again dominant.

Poly(acrylic acid) (PAA) was grafted onto both termini of Pluronic F87 (PEO₆₇-PPO₃₉-PEO₆₇) via atom transfer radical polymerization to produce a novel muco-adhesive block copolymer PAA₈₀-b-F₈₇-b-PAA₈₀. It was observed that PAA₈₀-F₈₇-PAA₈₀ forms stable complexes with weakly basic anti-cancer drug, Doxorubicin. Thermodynamic changes due to the drug binding to the copolymer were assessed at different pH by isothermal titration calorimetry (ITC). The formation of the polymer/drug complexes was studied by turbidimetric titration and dynamic light scattering. Doxorubicin and PAA-b-F87-b-PAA block copolymer are found to interact strongly in aqueous solution via non-covalent interactions over a wide pH range. At pH>4.35, drug binding is due to electrostatic interactions. Hydrogen-bond also plays a role in the stabilization of the PAA₈₀-F₈₇-PAA₈₀/DOX complex. At pH 7.4 (α=0.8), the size and stability of polymer/drug complex depend strongly on the doxorubicin concentration. When CDOX <0.13mM, the PAA₈₀-F₈₇-PAA₈₀ copolymer forms stable inter-chain complexes with DOX (110 ~ 150 nm). When CDOX >0.13mM, as suggested by the light scattering result, the reorganization of the polymer/drug complex is believed to occur. With further addition of DOX (CDOX >0.34mM), sharp increase in the turbidity indicates the formation of large aggregates, followed by phase separation. The onset of a sharp enthalpy increase corresponds to the formation of a stoichiometric complex. / Singapore-MIT Alliance (SMA)

Citrate-coated gadolinium trifluoride (Cit-GdF3) and poly(acrylic acid)-coated nanoparticles (PAA-GdF3 NPs) were synthesized, the former reproduced from literature (though using more refined conditions), the latter through a new, two-step, ligand exchange method. Diamagnetic nanoparticle analogs (Cit-YF3 NPs) were prepared to investigate citrate interactions with the nanoparticle surface using NMR. Citrate was found to bind in numerous conformations, with a total of between 29 – 46 % bound at 0 ºC. Exchange studies revealed short residence lifetimes of one and twelve seconds respectively for bound and free forms of citrate (0 ºC), perhaps explaining the colloidal instability of these nanoparticles. PAA-GdF3 NPs were synthesized by first producing their Cit-GdF3 counterparts, and then exchanging citrate for PAA. The impetus behind this latter synthesis was the relative enhancement in stability and relaxivity attainable by these nanoparticles. The displacement of citrate by PAA was verified using diffusion NMR studies.

Citrate-coated gadolinium trifluoride (Cit-GdF3) and poly(acrylic acid)-coated nanoparticles (PAA-GdF3 NPs) were synthesized, the former reproduced from literature (though using more refined conditions), the latter through a new, two-step, ligand exchange method. Diamagnetic nanoparticle analogs (Cit-YF3 NPs) were prepared to investigate citrate interactions with the nanoparticle surface using NMR. Citrate was found to bind in numerous conformations, with a total of between 29 – 46 % bound at 0 ºC. Exchange studies revealed short residence lifetimes of one and twelve seconds respectively for bound and free forms of citrate (0 ºC), perhaps explaining the colloidal instability of these nanoparticles. PAA-GdF3 NPs were synthesized by first producing their Cit-GdF3 counterparts, and then exchanging citrate for PAA. The impetus behind this latter synthesis was the relative enhancement in stability and relaxivity attainable by these nanoparticles. The displacement of citrate by PAA was verified using diffusion NMR studies.