<p>QC 20150922</p>

Ultra-stable cystine knotted microproteins, in which two disulfides and their connecting backbones form a circle that is penetrated by the third disulfide bonds, have attracted high interest due to their resistance to degradation in vitro and potential for the development of peptide drugs. This thesis gives new insights into engineering of that framework of microproteins, including approaches to their chemical synthesis, backbone engineering, structural and biological evaluations. Synthetic and oxidative folding approaches for bracelet cyclotides, a family of cyclic cystine knotted microproteins, was developed using a model peptide, cycloviolacin O2. Following assembly of the peptide chain, protected peptide was generated by mild cleavage that was subsequently thioesterified and cyclized in solution. The cyclic peptide was oxidatively folded under optimized conditions containing co-solvent and non-ionic detergent affording native cycloviolacin O2 as a major product. To gain further insights into the heterogeneity, efficiency and kinetics of cyclotides’ oxidative folding, the intermediates that accumulate in oxidative refolding pathways of all cyclotide subfamilies: Möbius, bracelet and the hybrid cyclotides were quantitatively determined under four different folding conditions. The results were used for defining major folding pathways, which indicated that Möbius cyclotides might accumulate heterogeneous folding intermediates with one-, two- and three-disulfides, whereas bracelet tend to accumulate a homogenous intermediate with three-disulfides, depending on the buffer systems used. Furthermore, to probe the internal factors contributing to inefficiency of oxidative folding, as well as undesired bioactivities of bracelet cyclotides (e.g., cytotoxic activity), polymer-hybridized cyclotides were designed by replacing non-conserved residues with small isosteric polymers. The designed hybrid analogs in which hybridization involved replacement of loop 3 with isosteric polymers showed improved synthetic and oxidative folding properties. The cytoxicity of a model hybrid designed with replacement of loop 3 and 5 exhibited no cytotoxic activity at concentration of 128-fold relative to that of native peptide. Furthermore, 1D and 2D 1H NMR analysis of this hybrid showed that it had well structured fold.

A modified yeast one-hybrid (MY1H) system has been developed for in vivo investigation of simultaneous protein-protein and protein:DNA interactions. The traditional yeast one-hybrid assay (Y1H) permits examination of one expressed protein targeting one DNA site, whereas our MY1H allows coexpression of two different proteins and examination of their activity at the DNA target. This single-plasmid based MY1H was validated by use of the DNA-binding protein p53 and its inhibitory partners, large T antigen (LTAg) and 53BP2. The MY1H system could be used to examine proteins that contribute inhibitory, repressive, coactivational or bridging functions to the protein under investigation, as well as potential extension toward library screening for identification of novel accessory proteins. After development and validation of the MY1H with the p53/LTAg/53BP2 system, we applied the MY1H system to investigate the DNA binding activities of heterodimeric proteins, the bHLH/PAS domains of AhR and Arnt that target the xenobiotic response element (XRE). The AhR/Arnt:XRE interaction, which served as our positive control for heterodimeric protein binding of the XRE DNA site, showed negative signals in initial MY1H experiments. These false negative observations were turned into true positives by increasing the number of DNA target sites upstream of the reporter genes and increasing the number of activator domains fused to the two monomers. This methodology may help trouble-shooting false negatives stemming from unproductive transcription in yeast genetic assays, which can be a common problem. In the study of XRE-binding proteins, two bHLHZ-like hybrid proteins, AhRJunD and ArntFos were designed and coexpressed in the MY1H and yeast two-hybrid (Y2H) systems; these proteins comprise the bHLH domains of AhR and Arnt fused to the leucine zipper (LZ) elements from bZIP proteins JunD and Fos, respectively. The in vivo assays revealed that in the absence of the XRE DNA site, heterodimers and homodimers formed, but in the presence of the nonpalindromic XRE, only heterodimers bound to the XRE and activated reporter transcription. The present results provide valuable information on DNA-mediated protein heterodimerization and specific DNA binding, as well as the relationship between protein structure and DNA-binding function.

A modified yeast one-hybrid (MY1H) system has been developed for in vivo investigation of simultaneous protein-protein and protein:DNA interactions. The traditional yeast one-hybrid assay (Y1H) permits examination of one expressed protein targeting one DNA site, whereas our MY1H allows coexpression of two different proteins and examination of their activity at the DNA target. This single-plasmid based MY1H was validated by use of the DNA-binding protein p53 and its inhibitory partners, large T antigen (LTAg) and 53BP2. The MY1H system could be used to examine proteins that contribute inhibitory, repressive, coactivational or bridging functions to the protein under investigation, as well as potential extension toward library screening for identification of novel accessory proteins. After development and validation of the MY1H with the p53/LTAg/53BP2 system, we applied the MY1H system to investigate the DNA binding activities of heterodimeric proteins, the bHLH/PAS domains of AhR and Arnt that target the xenobiotic response element (XRE). The AhR/Arnt:XRE interaction, which served as our positive control for heterodimeric protein binding of the XRE DNA site, showed negative signals in initial MY1H experiments. These false negative observations were turned into true positives by increasing the number of DNA target sites upstream of the reporter genes and increasing the number of activator domains fused to the two monomers. This methodology may help trouble-shooting false negatives stemming from unproductive transcription in yeast genetic assays, which can be a common problem. In the study of XRE-binding proteins, two bHLHZ-like hybrid proteins, AhRJunD and ArntFos were designed and coexpressed in the MY1H and yeast two-hybrid (Y2H) systems; these proteins comprise the bHLH domains of AhR and Arnt fused to the leucine zipper (LZ) elements from bZIP proteins JunD and Fos, respectively. The in vivo assays revealed that in the absence of the XRE DNA site, heterodimers and homodimers formed, but in the presence of the nonpalindromic XRE, only heterodimers bound to the XRE and activated reporter transcription. The present results provide valuable information on DNA-mediated protein heterodimerization and specific DNA binding, as well as the relationship between protein structure and DNA-binding function.

Thesis (M.Tech.: Biotechnology)-Dept. of Biotechnology, Durban University of Technology, 2007 vi, 92 leaves / Interest in xylanases from different microbial sources has increased markedly in the past decade, in part because of the application of these enzymes in a number of industries, the main area being the pulp and paper industry. While conventional methods will continue to be applied to enzyme production from micro-organisms, the application of recombinant DNA techniques is beginning to reveal important information on the molecular basis and this knowledge is now being applied both in the laboratory and commercially. In this study, a directed evolution strategy was used to select an enzyme variant with high thermostability. This study describes the use of error-prone PCR to modify the xylanase gene from Thermomyces lanuginosus DSM 5826, rendering it tolerant to temperatures in excess of 80°C. Mutagenesis comprised of different concentrations of nucleotides and manganese ions. The variants were generated in iterative steps and subsequent screening for the best mutant was evaluated using RBB-xylan agar plates. The optimum temperature for the activity of xylanases amongst all the enzyme variants was 72°C whilst the temperature optimum for the wild type enzyme was 70°C. Long term thermostability screening was therefore carried out at 80°C and 90°C. The screen yielded a variant which had a 38% improvement in thermostability compared to the wild type xylanase from pX3 (the unmutated gene). Successive rounds of error-prone PCR were carried out and in each round the progeny mutant displayed better thermostability than the parent. The most stable variant exhibited 71% residual activity after 90 minutes at 80˚C. Sequence analysis revealed four single amino acid residue changes that possibly enhanced their thermostabilities. This in vitro enzyme evolution technique therefore served as an effective tool in improving the thermostable property of this xylanase which is an important requirement in industry and has considerable potential for many industrial applications.

Thesis (D.Tech.: Biotechnology)-Dept. of Biotechnology, Durban University of Technology, 2007 xi, 209 leaves / Protein engineering technologies, such as directed evolution and DNA recombination, are often used to modify enzymes on a genetic level for the creation of useful industrial catalysts. Pre-treatment of paper pulps with xylanases have been shown to decrease the amounts of toxic chlorine dioxide used to bleach pulp. This study was undertaken to improve the thermal and alkaline stabilities of the xylanase from the fungus Thermomyces lanuginosus using ep-PCR and DNA shuffling.

Submitted in fulfillment for the requirement of a Degree of Master of Technology: Biotechnology, in the Department of Biotechnology and Food Technology, Faculty of Applied Sciences, Durban University of Technology, Durban, South Africa, 2009. / Protein engineering has provided a key for adapting naturally-occurring enzymes for industrial processes. However, several obstacles have to be overcome after these proteins have been adapted, the main one being finding a suitable host to over-express these recombinant protein. This study investigated Saccharomyces cerevisiae, Pichia pastoris and Escherichia coli as suitable expression hosts for a previously modified fungal xylanase, which is naturally produced by the filamentous fungus, Thermomyces lanuginosus. A xylanase variant, NC38, that was made alkaline-stable using directed evolution was cloned into four different vectors: pDLG1 with an ADH2 promoter and pJC1 with a PGK promoter for expression in S. Cerevisiae, pBGP1 with a GAP promoter for expression in P. pastoris and pET22b(+) for expression in E. Coli BL21 (DE3). S. Cerevisiae clones with the p DLG1-NC38 combination showed very low activity on the plate assay and were not used for expression in liquid media as the promoter was easily repressed by reducing sugars used during production experiments. S. cerevisiae clones carrying pJC1-NC38 were grown in media without uracil while P. Pastoris clones were grown in YPD containing the antibiotic, zeocin and E. Coli clones were grown in LB with ampicillin. The levels of xylanase expression were then compared between P. Pastoris, S. cerevisiae and E. coli. The highest recombinant xylanase expression was observed in P. Pastoris with 261.7U/ml, followed by E.coli with 47.9 U/ml and lastly S. cerevisiae with 13.2 U/ml. The localization of the enzyme was also determined. In the methylotrophic yeast, P. Pastoris, the enzyme was secreted into the culture media with little or no contamination from the host proteins, while the in other hosts, the xylanase was located intracellularly. Therefore in this study, a mutated alkaline stable xylanase was successfully expressed in P. Pastoris and was also secreted into the culture medium with little or no contamination by host proteins, which favours the application of this enzyme in the pulp and paper industry.

Submitted in complete fulfillment for the Degree of Master of Technology (Biotechnology)in the Department of Biotechnology and Food Technology, Faculty of Applied Sciences, Durban University of Technology, Durban, South Africa, 2009. / Protein engineering has been a valuable tool in creating enzyme variants that are capable of withstanding the extreme environments of industrial processes. Xylanases are a family of hemicellulolytic enzymes that are used in the biobleaching of pulp. Using directed evolution, a thermostable and alkaline stabl xylanase variant (S340) was created from the thermophilic fungus, Thermomyces lanuginosus. However, a host that was capable of rapid growth and high-level expression of the enzyme in large amounts was required. The insert containing the xylanase gene was cloned into a series a pET vectors in Escherichia coli BL21 (DE3) pLysS and trimmed from 786 bp to 692 bp to remove excess fungal DNA upstream and downstream of the open reading frame (ORF). The gene was then re-inserted back into the pET vectors. Using optimized growth conditions and lactose induction, a 14.9% increase in xylanase activity from 784.3 nkat/ml to 921.8 nkat/ml was recorded in one of the clones. The increase in expression was most probably due to the removal of fungal DNA between the vector promoter and the start codon. The distribution of the xylanase in the extracellular, periplasmic and cytoplasmic fractions was 17.3%, 51.3% and 31.4%, respectively. The modified enzyme was then purified to electrophoretic homogeneity using affinity chromatography. The xylanase had optimal activity at pH 5.5 and 70°C. After 120 min at 90°C and pH 10, S340 still displayed 39% residual activity. This enzyme is therefore well suited for its application in the pulp and paper industry.

The oligomerisation of protein subunits is an area of much research interest, in particular the relationship to protein function. In the last decade, the potential to control the interactions involved in order to design constructs with tuneable oligomeric properties in vitro has been pursued. The subject of this thesis is the quaternary structure of members of the peroxiredoxin family, which have been seen to assume an intriguing array of organisations. Human Peroxiredoxin 3 (HsPrx3) and Mycobacterium tuberculosis alkyl hydroperoxide reductase (MtAhpE) catalyse the detoxification of reactive species, preferentially hydrogen peroxide and peroxynitrite respectively, and form an essential part of the antioxidant defence system. As well as their biomedical interest, the ability of these proteins to form organised supramolecular assemblies makes them of interest in protein nanotechnology. The work described focusses on the elucidation of the quaternary structure of both proteins, resolving previous debates about their oligomeric state. The factors influencing oligomerisation were examined through biophysical characterisation in different conditions, using solution techniques including chromatography, light and X-ray scattering, and electron microscopy. The insight gained, along with analysis of the protein-protein interfaces, was used to alter the quaternary structure through site-directed mutagenesis. This resulted in a level of control over the protein’s oligomeric state to be achieved, and novel structures with potential applications in nanotechnology to be generated. The activity of the non-native structures was also assessed, to begin to unravel the relationship between peroxiredoxin quaternary structure to enzyme activity. The formation and structure of very high molecular weight complexes of HsPrx3 were explored using electron microscopy. The first high resolution structural data for such a complex is presented, analysis of which allowed the theory of an assembly mechanism to be proposed.

NRs are enzymes that catalyze the reduction of nitroaromatics to their corresponding nitroso, hydroxylamine, and, in limited cases, amine They have gathered interest in many scientific communities, and are currently actively researched bioremediation and prodrug activation. Here we attempt to utilize them for the purpose of synthesizing substituted aromatic amines that are found in a number of active pharmaceutical ingredients (APIs). As NRs described in the literature have varying product distribution ranges (from those that produce hydroxylamine to others that yield amine) several similar and different NRs were studied for their selectivity. Additionally, a quantitative structure-activity relationship (QSAR) was determined to characterize the substrate specificity of NRs. To employ the use of flavoenzymes in synthesis, multiple reaction- and protein-engineering approaches were devised. One scheme was to establish an enzymo-chemical synthesis where NRs were paired with reducing agents for a chemical reduction. Another method was to create a monomeric NR through directed evolution from ER scaffolds for future immobilization applications. Protein engineering techniques were also utilized on NADH oxidases which we characterized and developed for nicotinamide cofactor regeneration. As a whole, this dissertation expands our current understanding on NRs and demonstrates the possibility of using several flavoenzymes in the synthesis of organic molecules.