京都大学 / 新制・課程博士 / 博士(工学) / 甲第23930号 / 工博第5017号 / 新制||工||1783(附属図書館) / 京都大学大学院工学研究科化学工学専攻 / (主査)教授 大嶋 正裕, 教授 山子 茂, 教授 佐野 紀彰 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

<p>In this thesis work, two new CO₂-responsive monomers have been synthesized. These amidine-containing monomers were prepared in a simple and effective one-step reaction, giving a very high yield (98.5 %) of product. Furthermore, there was no complicated further purification required to obtain the highly pure product. The CO₂ switchability, conductivity and partitioning of the monomers were measured. It was confirmed that the monomers could be protonated CO₂ in the present of trace amount of water and reversibly switched back and forth to their natural forms by N₂ at room temperature.</p> <p>The polymers having different molecular weights were prepared from one monomer via conventional free radical polymerization method. The polymers also showed the reversible switchability property with CO₂ and N₂ stimuli. This was confirmed by the results of conductivity and partitioning tests. Temperature showed a major influence on the conductivity of the monomer and polymers. The effect of molecular weight on the polymer switchability of was further investigated through conductivity tests and potentiometric titration. The conductivity decreased with the increased molecular weight. The apparent equilibrium constant (pK_a)decreased with the degree of protonation (δ) suggesting that the basicity of the polymers is strongly depended on the value of δ.</p> / Master of Applied Science (MASc)

<p> Poly(N-isopropylacrylamide) (PNIPAM) has attracted much attention as a thermo-responsive polymer. However, the molecular weight (MW) dependence of its phase transition temperature is still controversial. This situation is largely due to the difficulty in synthesizing narrow-disperse PNIPAM. We have addressed the challenge and developed an atom transfer radical polymerization (ATRP) method to prepare narrow-disperse PNIPAM with moderate to high conversions, using branched alcohols as solvents. Aqueous solutions of these narrow-disperse PNIPAMs showed a dramatic decrease of the phase transition temperature with increasing molecular weight, as measured by turbidimetry and differential scanning calorimetry. Four other series of narrow-disperse PNIPAM with well-controlled molecular weights and with end groups of varying hydrophobicity were also synthesized by ATRP using the corresponding initiators, which enabled us to resolve the MW and end group effects. All the four series of samples showed an inverse molecular weight (MW) dependence of their phase transition temperature. The magnitude of the MW dependence decreased when using more hydrophobic end groups. The end groups were observed to have effects on the cloud point temperature, on the shape of the cloud point curves, and on the enthalpy of the phase transition.</p> / Thesis / Master of Science (MSc)

When a biomaterial is inserted into the body, the interaction of the surface with the surrounding biological environment is crucial. Given the importance of the surface, the ability to alter the surface properties to support a compatible environment is therefore desirable. Silicone hydrogel contact lenses (CL) allow for improved oxygen permeability through the incorporation of siloxane functional groups. These groups however are extremely surface active and upon rotation, can impart hydrophobicity to the lens surface, decreasing lens wettability and increasing protein and lipid deposition. Lens biofouling may be problematic and therefore surface modification of these materials to increase compatibility is exceedingly recognized for importance in both industry and research. The current work focuses on the creation of a novel anti-fouling polymer surface by the incorporation of 2-methacryoyloxyethyl phosphorylcholine (MPC), well known for its biomimetic and anti-fouling properties. A controlled polymerization method was used to generate a unique double-grafted architecture to explore the effect of increasing surface density of polyMPC chains on corresponding anti-fouling properties. The novel free polymer was synthesized by a 3-step atom transfer radical polymerization (ATRP). First, poly(2-hydroxyethyl methacrylate) (polyHEMA) was polymerized by ATRP, where the hydroxyl (OH) groups of the polymer then underwent an esterification to create macroinitiating sites. From these sites, a second ATRP of poly(MPC) varying in length occurred, yielding the double-grafted polymer poly(2(2-bromoisobutyryloxy-ethyl methacrylate)-graft-poly(2-methacryloyloxyethyl phosphorylcholine (pBIBEM-g-pMPC). The polymer was designed for resistance to protein adsorption through a possible synergistic effect between the surface induced hydration layer by surrounding PC groups coupled with steric repulsion of the densely grafted chains. To test its potential as a surface modifier, the polymer was grafted from model silicone hydrogel CL through a 4-step surface initiated ATRP (SI-ATRP) in a similar manner to the free polymer. First, the ATRP initiator was immobilized from the HEMA OH groups of the unmodified CL, generating Intermedate-1. A polyHEMA brush was grafted from the initiating sites yielding pHEMA-50, followed by the generation of a second initiator layer (Intermediate- 2). A sequential ATRP of poly(MPC) then generated the target pMPC-50/pMPC-100 surfaces. For the free pBIBEM-g-pMPC polymer analysis, 1H-NMR and GPC determined polymers formed with a predictable MW and low polydispersity (PDI). For surface grafting, using a sacrificial initiator, 1H-NMR and GPC indicated that the pHEMA-50 and pMPC-50/pMPC-100 polymers were well-controlled, with a MW close to the theoretical and a low PDI. For surface chemical composition, ATR-FTIR showed the presence of the ATRP initiator (Intermediate-1 and 2) by the appearance of a C-Br peak and disappearance of the OH peak. XPS confirmed the chemical composition of the 4-step synthesis by a change in the fraction of expected surface elements. Both the surface wettability and EWC of the materials increased upon pMPC modification, further improving upon increasing pMPC chain length. The contact angle was as low as 16.04 ± 2.37º for pMPC-50 surfaces and complete wetting for pMPC-100. Finally, the single protein adsorption using lysozyme and bovine serum albumin (BSA) showed significantly decreased protein levels for pMPC-50/100 lenses, as much as 83% (p 0.00036) for lysozyme and 73% (p 0.0076) for BSA, with no significant difference upon chain length variation. The aforementioned data demonstrates that the novel polymer has potential in providing an anti-fouling and extremely wettable surface, specifically regarding silicone hydrogel CL surfaces. / Thesis / Master of Applied Science (MASc)

In this thesis, acrylic polymers (methyl methacrylate, MMA; N,N' -dimethylamino ethyl methacrylate, DMAEMA; oligo-ethylene glycol methacrylate, OEGMA; trifluoroethyl methacrylate, TFEMA) were grafted from various metal surfaces such as cold rolled steel (CRS), stainless steel (SS), aluminum (Al) and nickel (Ni) through surface-initiated atom transfer radical polymerization (s-ATRP). The purpose is to improve corrosion resistance and to introduce multi-functionality to metal surface. The metal substrates were precisely polished and were facile for characterization by ellipsometry. 3-((alpha)-Bromo-2-methyl) propylamide propyltriethoxysilane was synthesized and immobilized on the metal surfaces under a simple and workplace-friendly condition. Grafting density was estimated to be 0.58 chains/nm^2 for CRS-gPMMA, 0.55 chains/nm^2 for Ni-g-PMMA and 0.18 chains/nm^2 for SS-g-DMAEMA and 0.66 chains/nm^2 for SS-g-PDMAEMA. Two strategies, i.e., "adding free initiator" and "adding deactivator", were adopted for the control over polymer molecular weight and grafting density in the CRS-g-PMMA system. The polymer thicknesses up to 80 nm were obtained within 80 min using the "adding deactivator" strategy. Copper and iron catalyst systems were compared on different metal substrates. A severe deactivation of copper catalyst was observed on the metal substrates. Controlled polymerization with relatively low polydispersity was obtained using the iron catalyst. The metal surfaces at various stages of modification were characterized by X-ray photoelectron spectroscopy, ellipsometry, goniometry, and atomic force microscopy (AFM). Electrochemical experiments were also carried out to measure the polarization resistance and corrosion potential of CRS-g-PMMA substrates. This thesis work demonstrated that the surface-initiated ATRP is a versatile means for the surface modification of metals with well-defined and functionalized polymer brushes. / Thesis / Master of Applied Science (MASc)

Dimethacrylate monomers containing two cleavable tert-butyl ester groups were synthesized and utilized in the synthesis of star-shaped polymers. Star polymer coupling was achieved by reacting the living poly(alkyl methacrylate) using 2,5-dimethyl-2,5-hexanediol dimethacrylate (DHDMA) or dicumyl dimethacrylate (DCDMA). These starshaped polymers were cleaved under hydrolytic conditions, leading to significant reductions in molecular weights. The cleavable star-shaped polymers also underwent uncatalyzed degradation at elevated temperatures. Pressure-sensitive adhesive (PSA) copolymers based on 2-ethylhexyl acrylate (EHA) were synthesized containing cleavable branching comprised of either DHDMA or DCDMA. Extremely high molecular weight branched polymers were obtained, and these branched adhesives exhibited 180° peel strengths that displayed a strong dependence on the weight-average molecular weights. The PSA branching sites were cleaved via acid-catalyzed hydrolysis, drastically lowering the 1180° peel strengths of the cleaved linear polymers between 75 and 95 percent. Branched poly (EHA) PSAs containing 2-hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethacrylate (EGDMA), as well as poly(EHA-co-HEMA), were synthesized and modified with photoactive functional groups. Cinnamate functionalized PSAs underwent photocrosslinking under UV light, leading to significant losses in 180° peel strengths. The acrylate functionalized PSAs were mixed with a photoinitiator, and following crosslinking under visible light, these PSAs exhibited excellent deactivation characteristics. Poly(methyl methacrylate) containing aliphatic diols were synthesized via anionic polymerization utilizing the novel protected functional co-initiator 1,1-bis-, 4'-(2-(tertbutyldimethylsilyloxy) ethoxy)phenylethylene (BTOPE). Following the coupling of BTOPE with sec-butyl lithium, methyl methacrylate was polymerized in living fashion at -78 °C in THF. A broad molecular weight range of BTOPE-initiated PMMA samples were synthesized, and molecular weight distributions were as low as 1.03 were observed. Hydrolytic deprotection of the protecting groups resulted in α,α-dihydroxy PMMA. The graft macromonomers poly(tert-butyl styrene-block-styrene) methacrylate and poly(styrene-block-tert-butyl styrene) methacrylate were synthesized from the corresponding diblock copolymer alcohols utilizing acid chloride chemistry. Excellent molecular weight control, narrow molecular weight distributions, and perfect crossover were observed in both types of diblock polymers. The macromonomers were copolymerized with methyl methacrylate via solution free-radical copolymerization. The styrene blocks in the purified graft copolymers were selectively sulfonated using acetyl sulfate. / Ph. D.

High molecular weight star-shaped polystyrenes were prepared via the coupling of 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) terminated polystyrene oligomers with divinylbenzene (DVB) in m-xylene at 138 °C. Linear polystyrene oligomers (Mn = 19,300 g/mol, Mw/Mn = 1.10) were synthesized in bulk styrene using benzoyl peroxide in the presence of TEMPO at approximately 130 °C. In situ mid-infrared spectroscopy was successfully utilized to follow initiation, monomer conversion, and polymer formation. Real-time data allowed for the determination of apparent rate constants of 2.1E-5 s⁻¹ at 132 °C and 1.2E-5 s⁻¹ at 126 °C from the profile of the decaying styrene vinyl carbon-hydrogen (=CH₂) absorbance at 907 cm⁻¹. Coupling of the TEMPO terminated oligomers under optimum conditions resulted in a compact and dense product with a number average molecular weight exceeding 300,000 g/mol (Mw/Mn = 3.03) after 24 h, suggesting the formation of relatively well-defined star-shaped polymers. Synthetic factors that affected the molecular weight, yield, and composition of maleic anhydride (MAH), norbornene (Nb), and tert-butyl 5-norbornene-2-carboxylate (NbTBE) terpolymers were investigated. Pseudo first order kinetic analysis using in situ FTIR indicated that the observed rate of reaction was a strong function of the Nb/NbTBE ratio with a maximum of 6.7E-5 s⁻¹ for a 50/0/50 Nb/NbTBE/MAH monomer ratio and a minimum of 1.1E-5 s⁻¹ for a 0/50/50 Nb/NbTBE/MAH ratio. Polymer yields were also observed to be a function of the Nb/NbTBE ratio and also decreased with increasing NbTBE. Calculated work of adhesion values (Wadh) values were observed to increase as the content of NbTBE was increased. 193 nm photoresist formulations incorporating polymers with high NbTBE content showed increased imaging performance using 193 nm light and successfully produced sharp and defined features as small as 110 nm, which was demonstrated via scanning electron microscopy (SEM). Additional functionality was introduced via the copolymerization of MAH with several norbornene (Nb) derivatives that were synthesized from facile Diels-Alder cycloaddition reactions of cyclopentadiene with a-olefins containing electron withdrawing groups. Subsequent hydrolysis of the anhydride offered further versatility and provided an avenue to introduce aqueous base solubility into Nb/MAH copolymers. / Ph. D.

This dissertation focuses on synthesis and characterization of graft and block copolymers containing carboxylate or phosphonate anions that are potential candidates for biomedical applications such as drug delivery and dental adhesives. Ammonium bisdiethylphosphonate (meth)acrylate and acrylamide phosphonate monomers were synthesized based on aza-Michael addition reactions. Free radical copolymerizations of these monomers with an acrylate-functional poly(ethylene oxide) (PEO) macromonomer produced graft copolymers. Quantitative deprotection of the alkylphosphonate groups afforded graft copolymers with zwitterionic ammonium bisphosphonate or anionic phosphonate backbones and PEO grafts. The zwitterionic copolymers spontaneously assembled into aggregates in aqueous media. The anionic copolymers formed aggregates in DMF and DMSO, while only small amounts of aggregates were present in copolymer/methanol or copolymer/water solutions. Binding capabilities of the acrylamide phosphonic acids were investigated through interactions with hydroxyapatite. Previously our group has prepared poly(ethylene oxide)-b-poly(acrylic acid) (PEO-b-PAA) copolymers and used these polymers as carriers for both MRI imaging agents and cationic drugs. To enhance the capabilities of those carriers in tracking and crosslinking, we have designed, synthesized and characterized amine functionalized PEO-b-PAA copolymers. First, heterobifunctional poly(ethylene oxide) (PEO) with three different molecular weights were synthesized. Modification on one of these afforded a PEO macroinitiator with a bromide on one end and a protected amine on the other end. ATRP polymerization of tert-butyl acrylate (tBuA) in the presence of this initiator and a copper (I) bromide (CuBr) catalyst yielded a diblock copolymer. The copolymer was deprotected by reaction with trifluoroacetic acid (TFA) and formed an amine terminated H2N-PEO-b-PAA. Recently our group has utilized the novel ammonium bisdiethylphosphonate (meth)acrylate and acrylamide phosphonate copolymers to incorporate Carboplatin. The resulting complexes exhibited excellent anticancer activity against MCF-7 breast cancer cells which might be related to ligand exchange of the dicarboxylate group of Carboplatin with the phosphonic acid moieties in the copolymer. Hence, complexation of small-molecule phosphonic acids with Carboplatin was investigated. Three compounds, vinylphosphonic acid, 3-hydroxypropyl ammonium bisphosphonic acid and 2-hydroxyethyl ammonium phosphonic acid were complexed with Carboplatin under acidic and neutral conditions. Covalent bonding of these acids to carboplatin was only observed under acidic pH. The covalently bonded percentage was 17%, 37% and 34%, respectively. More in-depth investigation was of great importance to further understand this complexation behavior. / Ph. D.

Due in large part to the growth and development of reliable surface characterization techniques, as well as to advances in the physical and chemical techniques used to modify surfaces, the technology of surface modification has seen rapid expansion over the past two decades. A major thrust of this research is the growth of controlled/"living" polymeric brushes from the surface of various substrates, an advance that promises to be a facile and reproducible way of altering surface properties. A unique initiator bearing ATRP (atom transfer radical polymerization), cleavage, and condensation functionalities was prepared and attached to the hydrolyzed surface of silica gel. Preliminary results indicate that control of reversibly terminated grafts of varying degrees of polymerization with polydispersity indices approaching 1.5 can be readily achieved-significant findings in the quest to design desired surface characteristics. Important physical characteristics may also be altered by way of varying molecular topologies. In the second major research thrust, the use of self-assembly to construct such topologies in the form of pseudorotaxanes fashioned from diverse macrocycles with multifarious guest ions is discussed. While the underlying goal was to investigate and understand the mode of complexation based on such environmental factors as substituent affects and neighboring group influences, new insight was gained on the synthetic manipulation of cooperative events-events that freely occur in nature. The complexation behavior of several functionalized bis-(meta-phenylene)-32-crown-10 macrocycles with various paraquat guest moieties was. As expected, studies indicated that electron-donating substituents on the crown ether drive association, a likely result of increased p -p interactions among host and guest species. The association between a bicyclic macrocycle and dimethyl paraquat was also investigated. Not surprisingly, binding of paraquat by the bicyclic was much stronger than the binding found in analogous macrocycles. Lastly, the endgroup functionalization of poly(propyleneimine) dendrimers with two crown ether macrocycles was performed and the complexation with host-specific guests studied. Curiously, two extreme binding regimes were found: the larger 32-membered crown ether assembly displayed anti-cooperative behavior upon complexation with paraquat, while the smaller 24-membered macrocyclic system exhibited cooperative effects with 2o ammonium ions. These cooperative results are among the very first described for non-biological systems and hint at their potential use in developing highly efficient, synthetically designed supramolecular systems. / Master of Science

Ces travaux de thèse portent sur la polymérisation radicalaire contrôlée (PRC) des esters et amides de vinyle. L’une des possibilités de contrôle est le piégeage dynamique réversible des chaînes radicalaires croissantes (P•) par un agent de contrôle (T) formant une espèce dormante (P─T’). La concentration en radicaux dans le milieu peut alors diminuer dramatiquement de sorte que les réactions indésirables de terminaisons soient négligeables et que le contrôle de la masse molaire des polymères soit atteint avec un faible indice de dispersité. L’utilisation de complexes métalliques, pouvant s’oxider et former une liaison métal-carbone, comme agent de piégeage des radicaux est une manière de réaliser ce contrôle. La PRC est alors appelée Polymérisation Radicalaire Contrôlée par voie Organométallique (OMRP). A ce jour, plusieurs métaux de transitions ont été utilisés avec plus ou moins de succès en OMRP. Lors de cette étude, nous avons synthétisé des complexes de cuivre(I) et testé leurs performances pour l’OMRP de l’acétate de vinyle et de l’éthylène. Nous avons également utilisé des outils de chimie théorique pour mieux comprendre pourquoi le cobalt(II) acétylacétonate est, jusqu’à aujourd’hui, le meilleur agent de contrôle pour la polymérisation de l’acétate de vinyle et des amides de vinyle. Grâce à la théorie de la fonctionnelle de densité (DFT), nous avons mis en lumière le rôle crucial de la coordination sur le cobalt des groupements carbonyles des monomères étudiés. / This thesis focus on Controlled Radical Polymerization (CRP) of vinyl esters and vinyl amides. One of the possibilities to achieve this control is a dynamic reversible trapping of the growing radical chains (P•) by a controlling agent (T) to form a dormant species (P─T’). The radical concentration in the medium can be dramatically reduced so that the unwanted terminations are disfavored and polymers with controlled molecular weights and low dispersity can be obtained. A way to achieve this control is the use of metallic complexes, which can oxidize and form a metal-carbon bond, as trapping agent in the so-called Organometallic Mediated Radical Polymerization (OMRP). So far, different transition metals have been used with gretaer or smaller success. In this study, the synthesis of copper(I) complexes and their investigation for the vinyl acetate and ethylene polymerization under OMRP conditions were performed. We also used computational chemistry as a tool to better understand why the cobalt(II) acetylacetonate (Co(acac)2) has, so far, given the best results for either vinyl acetate or vinyl amides polymerization. Thanks to Density Functional Theory (DFT), the crucial role of the monomer carbonyl group coordination to cobalt was pointed out.