Relaxor ferroelectrics have been a subject of intense research owing to their interesting physical properties such as high dielectric constant and giant electro-striction. Unlike the conventional lead based relaxors, the relaxors belonging to Aurivillius family of oxides have received much less attention because of the poor understanding of the origin of the relaxor behavior and high processing temperatures involved. In the present investigations, an attempt has been made to understand the origin of relaxor behavior of the materials belonging to Aurivillius family of oxides. The structure and relaxor behavior of BaBi2Nb2O9 (BBN) has been established via the XRD, electron diffraction and dielectric spectroscopy. The results are compared with that of a normal ferroelectric like SrBi2Nb2O9 belonging to the same family as well with that of a conventional relaxor like PMN. The results indicate that the dielectric behavior of BBN is significantly different from that of the conventional relaxors like BBN with very slow broadening of relaxation times and was attributed to the absence of significant polar ordering. To substantiate the existing understanding, studies have been carried out by adopting different strategies such as B-site and A-site cationic substitutions and texturing of the ceramics. Vanadium doping on B-site was found to decrease the sintering temperatures significantly. Aliovalent La3+ doping was found to affect the dielectric behavior strongly with substantial decrease of the freezing temperature and dielectric constants which shows that the relaxor behavior of BBN is highly sensitive to A-site order-disorder. The (00l) textured ceramic of pure and vanadium doped BBN was fabricated via a simple melt-quenching technique and was found to exhibit a significant dielectric and pyroelectric anisotropy. A new class of relaxor compositions (K0.5La0.5Bi2Nb2O9 & K0.5La0.5Bi2Ta2O9) have been synthesized and characterized. These new compounds exhibited interesting physical properties which are akin to that of the conventional lead based relaxors. The presence of superlattice reflections in the electron diffractin patterns recorded on these compounds establish the presence of polar nano regions of significant size. These relaxor crystallites at nano/micro level embedded in a glass matrix have been found to be very promising from their physical properties view point.

The group of materials with ABO3 type perovskite structure are very important due to their attractive electrical and magnetic properties for technological applications and have been studied in the form of single crystals, bulk polycrystalline materials and thin films. Recently, efforts have been made to synthesize and understand the growth of ABO3 type perovskite nanostructures because of their distinctive physical properties and potential applications in the nanodevices. The primary aim of the present thesis is to synthesize the perovskites at nano-scale, with zero-dimension (0D), and one-dimension (1D) configurations. Basic work was carried in terms of synthesis – structure – composition correlation. Due to the small nature of the synthesized materials, few attempts were done to examine the physical properties, but to a limited extant. Efforts were also done to emphasize the structural behavior of nano perovskite in comparison with their bulk counterparts. Chapter 1 provides a brief introduction to perovskite materials and nanostructures, their technological applications and the fundamental physics involved. A brief review of the perovskite nanostructures both from fundamental science and technological point of view is provided. Finally the specific objectives of the current research are outlined. Chapter 2 deals with the experimental studies carried out in this thesis. It describes the methods used for the synthesis, experimental set up and the basic operation principles of various structural and physical characterizations such as X-ray diffraction (XRD), thermal analysis, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM), compositional analysis (EDX), focused ion beam (FIB), electrical and magnetic studies of the materials prepared. Chapter 3 describes the fabrication of porous anodic aluminum oxide (AAO) templates with different pore size, basic steps for synthesis of nanotubes and the possible growth mechanism of nanotubes in the AAO template. In chapter 4, we report the synthesis of ferroelectric Ba1-xSrxTiO3 (x = 0.0, 0.3) nanoparticles (diameter range: 20-40nm) and Ba1-xSrxTiO3 (x = 0.0, 0.4) nanotubes with diameter about 200nm by the sol-gel method. The Ba1-xSrxTiO3 nanostructures so obtained were characterized by number of techniques, including FE-SEM, XRD, DTA/TGA, FTIR spectroscopy, TEM, HRTEM as well as EDX and SAED. Formation of Y-junctions and multi-branches in Ba1-xSrxTiO3 nanotubes were also observed. The wall of the nanotubes were found to be made of randomly oriented nanoparticles which were confirmed from the HRTEM image. The average thickness of the wall of the nanotubes was found around 15(±5) nm and nanoparticles consisting the wall were found to be in the range of 5-10nm. Diffused phase transition (cubic to tetragonal), shifted to lower temperature side and leaky ferroelectric P–E loops were observed in Ba1-xSrxTiO3 (x = 0.0) ceramic prepared from nanoparticles. Curie temperature was observed at 120oC in the BT nanotube array as confirmed by the dielectric study. The P–E loops of as-prepared Ba1-xSrxTiO3 (x = 0.0) nanotube array were also measured and the hysteresis clearly demonstrates the room temperature ferroelectricity in the as prepared nanotubes, indicating these nanotube array is potential media as ferroelectric information storage. In chapter 5, we report the synthesis of single crystalline nanoparticles and polycrystalline nanotubes of Pb0.76Ca0.24TiO3 (PCT24) by sol-gel processing and characterized by various techniques. The crystallinity and phase purity of the PCT24 nanoparticles and nanotubes were confirmed by the XRD and SAED pattern. Compositional homogeneity and their crystalline structure confirms the formation of the tetragonal perovskite phase. The wall of the nanotubes was found to be made of nanoparticles which were confirmed from the HRTEM analysis. The average thickness of the wall of the nanotubes was found around 20nm and nanoparticles consisting the wall were found to be in the range of 5-8nm. Formation of some single crystalline PCT24 nanorods was also observed as confirmed by SAED and HRTEM analysis. Formations of Y-junctions and multi-branches in this complex functional oxide were observed. Dielectric measurements shows the diffuse phase transition and frequency dependence of Tm (temperature at which real part of dielectric constant shows maxima) suggesting the relaxor type behavior in the PCT24 ceramic prepared from nanoparticles. Polarization study was carried out on PCT24 nanotube array, which shows the ferroelectric nature at room temperature. Chapter 6 reports the synthesis and studies of PbZrO3 (PZ) nanoparticles and PbZr1-xTixO3 for x = 0.0, 0.48 and 1.0 nanotubes. PZ nanoparticles were prepared by a novel sol-gel method based on diol-based solution. Initially, PZ was crystallized with some intermediate m-Z and t-Z phases at 400-550oC and start transforming to orthorhombic at around 600oC and then finally transformed into pure orthorhombic PZ phase at about 700oC. XRD and TEM confirmed the nanocrystalline nature of PZ particles. Curie temperature in the PZ ceramic prepared from PZ nanoparticles was observed around at 205oC, which is lower as compared to the bulk (233oC). P–E hysteresis loops of PZ ceramic prepared from nanoparticles were measured at different applied voltages and single ferroelectric loops of leaky nature were observed rather than antiferroelectrics. The lead zirconate nanoparticles produced may have potential applications as materials used in microelectronics and microelectromechanical systems. PbZr1-xTixO3 for x = 0.0 (PZ), 0.48 (PZT48) and 1 (PT) nanotubes were fabricated by sol-gel method within the closely packed porous alumina templates and characterized by various techniques. The crystallinity of the PZ, PZT48 and PT nanotubes were confirmed via XRD and SAED studies. EDX analysis demonstrated that stoichiometry was formed. Formation of Y-junctions in this complex functional oxide was also observed. The wall of the nanotubes was found to be made up of randomly oriented nanoparticles, which were confirmed by the HRTEM studies and also by a typical SEM image. The average thickness of the wall of the nanotubes was found to be around 10-20nm and nanoparticles consisting the wall was found to be in the range of 3 – 8nm. The Curie temperature was observed at 220oC in the PZ nanotube array. For the first time, PLD has been employed for the synthesis of lead zirconate nanotubes using AAO template. Well-registered arrays of these nanotubes could function as three dimensional (3D) device elements in miniaturized ferroelectric random access memory (FRAM). In chapter 7, we report the synthesis of single crystalline 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 (PMN-PT) nanoparticles. PMN-PT nanoparticles were developed by a novel sol-gel method based on diol route. After partial calcination at 450oC/1h, PMN-PT powder morphology started transforming from pyrochlore to perovskite phase. It is interesting to note that this partially crystallized PMN-PT powder was unstable under electron beam and generated freestanding lead nanoparticles after absorbing energy from a focused electron beam. PMN-PT powder annealed at 700°C was fully transformed to perovskite phase and was stable under electron beam. XRD calculations and TEM imaging confirmed the nanocrystalline nature of PMN-PT particles. Magnetic measurements on PMN-PT nanoparticles prepared at 650 and 750oC show room temperature ferromagnetic hysteresis, whereas the bulk or the agglomerated particles show diamagnetic behavior. With an increase of annealing temperature or the particle size the magnetic moment decreases. PMN-PT nanotubes with diameter about 200nm were fabricated successfully by the sol-gel method based on diol route within the closely packed porous nanochannel alumina templates. Phase purity and crystalline perovskite phase formation of PMN-PT nanotubes were confirmed by the XRD and SAED pattern. EDX analysis demonstrated that stoichiometry was formed within accepted limit. The wall of the nanotubes was found to be made of nanoparticles which were confirmed from the HRTEM analysis. The average thickness of the wall of the nanotube was found around 20 nm and nanoparticles consisting the wall were found to be in the range of 10-20 nm. Since electroceramic materials are following a similar trend to miniaturization as conventional semiconductors, the synthesis of nanosized oxidic building blocks is moving into the focus of scientific and technological interest. Ferroelectrics are promising class of materials for the fabrication of electronic devices, as they are already an integral part of modern nanotechnological operations. Chapter 8 deals with the synthesis and properties of BiFeO3 (BFO) nanoparticles and nanotubes. Single crystalline BFO nanoparticles of different size and polycrystalline BFO nanotubes were prepared by sol-gel method. As prepared nanostructures were characterized by various techniques such as XRD, TGA-DTA, FTIR, scanning electron microscope (SEM), transmission electron microscope (TEM), selected-area electron diffraction (SAED), high resolution TEM and energy-dispersive X-ray spectroscopy (EDX). The crystallinity and phase purity of the BFO nanoparticles and nanotubes were confirmed by the XRD, SAED pattern and HRTEM analysis. Compositional homogeneity and their crystalline structure confirms the formation of the rhombohedrally distorted perovskite phase. EDX analysis demonstrated that stoichiometric BiFeO3 was formed within accepted limit. The HRTEM analysis confirmed that wall of the BFO nanotubes was made of nanoparticles, which were randomly oriented in the wall. The average thickness of the wall of the nanotubes was found to be around 15 nm and nanoparticles consisting the wall were found to be in the range of 3-6nm. Formation of Y-junctions in this complex functional oxide was observed. Magnetic measurements show clearly the enhancement of ferromagnetism in BFO nanotubes and ferroelectric loops were also observed in these nanotubes, that indicates the multiferroic nature of these nanotubes. BFO nanostructures at a large scale might be important for many applications such as memory elements in nanoscale devices in future. Chapter 9 reports the synthesis of a series of crystalline La1-xCaxMnO3 (x = 0, 0.3, 0.5, 0.7) nanoparticles with average diameter about 20 nm by an improved sol-gel method. The crystallinity and phase formation of as prepared nanoparticles was confirmed via XRD, SAED and HRTEM studies. EDX analysis demonstrated that desired stoichiometric was formed. Magnetic characterization reveals that the PM-FM transitions (Tc) occurs around at 205, 235, 235 and 230 K for x = 0, 0.3, 0.5, 0.7, respectively. The strong irreversibility between zero field cooling (ZFC) and field cooling (FC) magnetization curves, a cusplike peak in ZFC curve and unusual shape of M versus H loop at T = 5 K gives strong support for surface spin glass behavior. The highly stable charge ordering state in bulk manganites is suppressed, while the ferromagnetism is enhanced in these nanoparticles (x = 0.5 and 0.7). La0.7Ca0.3MnO3 were fabricated by sol-gel method within the closely packed porous alumina templates. The wall of the nanotubes was found to be made up of randomly oriented nanoparticles (8-12nm) as confirmed by HRTEM studies. The strong irreversibility between ZFC and FC magnetization curves as well as a cusplike peak in ZFC curve gives strong support for surface spin glass behavior. Magnetization value as obtained from M-H loop was about 28.5% of expected value, suggesting the existence of a magnetic dead layer, which avoids the propagation of exchange interaction between magnetic grains. The PM-FM transition was observed at 235 K. Chapter 10 gives the summary and conclusions of the present study and also discusses the possible future work that could after more insights into the understanding of the perovskite nanostructures. Highlight of the present work (i) Successful growth of nanostructures in both particles and tube forms, and study of their structure – composition correlations. (ii) Present work could optimize the necessary chemistry to successfully grow nanoparticles and nanotubes of various perovskite compositions. (iii) Successful studies of physical properties of nanoparticles and nanotubes, ofcourse, to a limited extent. However the properties observed in the present nanostructures have a strong indication of nonlinear phenomena similar to their bulk counterparts. (iv) It was reported in the literature, the observation of ferromagnetic behavior in several nonmagnetic compositions at nano-scale. Surprisingly, similar ferroelectric behavior was noticed even in our perovskite complex oxides such as relaxors (PMN-PT). A clear interaction of magnetic spin and an electric dipole was evident in these oxides such as relaxors and also multiferroics at nano-scale (~10-20 nm). (v) In ferromagnetic compositions such as LCMO, a very interesting spin-glass type behavior was observed.

O titanato e zirconato de chumbo \'PB\'(\'ZR\'1-y\'TI\'y)\'O IND.3\' é um material ferroelétrico de estrutura perovskita que tem sido aplicado como transdutores, amplificadores, sensores piezoelétricos, piroelétricos e memórias ferroelétricas. É bem estabelecido que a incorporação de íons de \'LA POT.3+\' ou \'BA POT.2+\' nos sítios ocupados pelo \'PB\' no sistema \'PB\'(\'ZR\'1-y\'TI\'y)\'O\' (PZT), formando os sistemas \'PB\'1-x\'LA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PLZT) e \'PB\'1-x\'BA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PBZT), provoca mudanças significativas nas suas propriedades. No entanto, poucos trabalhos tem sido dedicados a esses sistemas contendo altas concentrações de \'TI\', principalmente no que se refere à estrutura desses materiais. Assim, este trabalho teve por objetivo analisar as propriedades estruturais e suas correlações com as propriedades dielétricas dos sistemas \'PB\'1-x\'LA\'x\'ZR\'0,40\'TI\'0,60\'O IND.3\' (PLZT100x) e \'PB\'1-x\'BA\'x\'ZR\'0,40\'TI\'0,60\'O IND.3\' (PBZT100x) em função da composição e da temperatura. Foram preparadas amostras cerâmicas por meio de sinterização convencional com x variando entre 0,05 e 0,21 para o sistema PLZT e entre 0,10 e 0,50 para o sistema PBZT. Em relação à estrutura a longa distância, medidas de difração de raios X mostraram uma diminuição no grau de tetragonalidade com o aumento da concentração dos cátions substituintes, que foi atribuída à formação de vacâncias no sítio A (caso do \'LA\') e diferença entre o raio iônico (caso do \'BA\'). Estas alterações estruturais em função da composição foram também responsáveis pelo aumento do grau de difusidade das curvas de permissividade dielétrica e pela observação de um estado ferroelétrico relaxor nas amostras contendo altas concentrações de \'LA\' e \'BA\'. Em relação à estrutural local, os resultados obtidos através da técnica de espectroscopia de absorção de raios X (XAS) nas bordas \'K\' do \'TI\' e LIII do \'PB\' mostraram que a incorporação de átomos de \'LA\' ou \'BA\' à estrutura do PZT leva a uma redução no deslocamento do átomo de \'TI\' em relação ao centro do octaedro \'TI\'O IND.6\' e mudanças na ordem local do átomo de \'PB\'. No que tange as composições contendo 21% at. de \'LA\' e 50% at. de \'BA\', diferentemente dos resultados de DRX que mostraram uma simetria cúbica, a técnica de XAS mostrou uma simetria local tetragonal. Em bom acordo com os resultados obtidos pela técnica de espectroscopia Raman, espectros EXAFS medidos em altas temperaturas mostraram também que a estrutura local não é compatível com uma estrutura de simetria cúbica. Espectros XANES medidos na borda \'K\' do oxigênio revelaram uma redução no grau de hibridização entre os estados 2p do \'O\' com 6sp do \'PB\' à medida que a concentração de \'LA\' ou \'BA\' aumenta, que estaria relacionada com o surgimento de comportamento relaxor. Amostras cerâmicas densas nanoestruturadas de composição PZT, PLZT11 e PBZT10 foram preparadas pelo método de spark plasma sintering (SPS) a fim de analisar a influência do tamanho de grão. Foi verificado que as amostras sinterizadas por SPS apresentam tamanho de grão em torno de 60 nm. A caracterização dielétrica destas amostras mostra que a redução do tamanho de grão causa uma redução no valor de máximo da permissividade dielétrica e características difusas da permissividade em função da temperatura devido ao aumento das regiões de contorno de grão. / Lead titanate zirconate (\'PB\'(\'ZR\'1-x\'TI\'x)\'O IND.3\') are ferroelectric materials with perovskite structure which has been used as transducers, capacitors, piezoelectric and pyroelectric sensors and ferroelectric memories. The substitution of \'PB POT.+2\' ions by \'LA POT.+3\' or \'BA POT.+2\' ions in the \'PB\'(\'ZR\'1-x\'TI\'x)\'O IND.3\' (PZT) system, which leads to the formation of the \'PB\'1-x\'LA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PLZT) and the \'PB\'1-x\'BA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PBZT) systems, induces several changes in the electric and structural properties of these materials. However, PLZT or PBZT systems based on \'TI\'-rich compositions have not been thoroughly investigated and the literature contains few reports concerning their structure. Thus, the main objectives of this doctoral thesis were the synthesis and structural characterization of \'PB\'1-x\'R\'x\'ZR\'0.40\'TI\'0.60\'O IND.3\' ferroelectric ceramic samples, with R = \'BA\' and \'LA\' and x between 0.00 to 0.50 (PLZT100x and PBZT100x). The characterization with X-ray diffraction technique of these samples showed a decrease of the tetragonality degree with increase of the doping cation concentration, which was related to the appearance of defects caused by the incorporation of \'LA\' or \'BA\' cations. These structural modifications were also responsible by the increase of the diffuseness at the dielectric permittivity and a relaxor behavior as a function of the \'LA\' or \'BA\' concentration. Concerning the local structure, XANES spectra in the absorption edge of various elements in PLZT and PBZT samples were performed. In the cases of \'TI\' \'K\'-edge absorption, the doping of \'LA\' and \'BA\' atoms in the PZT structure leads to a reduction of the displacement of \'TI\' atom in the center of the \'TI\'O IND.6\' octahedron. However, even when the crystal structure is cubic, a local octahedron distortion remains. EXAFS measurements in \'PB\' LIII-edge and \'ZR\' \'K\'-edge were performed and also indicate that local structure around lead or zirconium atoms is also affected by the introduction of \'LA\' and \'BA\' atoms in the PZT structure. In addition, XANES spectra measured at \'O\' \'K\'-edge revealed a reduction in the hybridization degree between \'O\' 2p and \'PB\' 6sp states with the addition of \'LA\' or \'BA\' atoms to the structure of PZT. It has been shown that hybridization between these states is essential to ferroelectricity and this reduction would be related to the relaxor behavior. PLZT and PBZT systems were also studied depending on the size of particle size in a nanometer scale. Thus samples PZT, PLZT11 and PBZT10 compositions were prepared using the synthesis method of precursor polymers and the process of sintering by spark plasma. A pronounced decrease in the values of maximum permittivity was observed and the dielectric curve as a function of the temperature exhibits a diffuse behavior. This size-induced diffuse phase transition and the reduction of the permittivity magnitude could be related to the differences between the core grain and the grain boundaries.

Les solutions solides (1-x)Na0,5Bi0,5TiO3 (NBT) – xCaTiO3 (CT) ont été étudiées par diffraction des rayons X, spectroscopie Raman, microscopie électronique à balayage, spectroscopie d’impédance et DSC. Ce sont des matériaux présentant la structure cristalline pérovskite. L’étude révèle la complexité mais aussi la richesse des phénomènes physiques dans cette famille de composés : les séquences des transitions de phases, l’influence du dopant Ca2+ sur les propriétés physico-chimiques du matériau, la relation étroite entre propriétés diélectriques et caractéristiques structurales. Des solutions solides (1-x)NBT – xCT, avec 0 ≤ x ≤ 1,00, ont été synthétisées par voie solide classique puis frittées selon une procédure spécifique dans un milieu confiné pour éviter toute perte de sodium et de bismuth. Les caractéristiques cristallines des solides obtenus imposent clairement de distinguer trois domaines suivant les valeurs de x. En effet, pour les valeurs croissantes de x et à la température ambiante, on observe un premier domaine (Région I, pour x ≤ 0,07) dans lequel le solide obtenu est une solution solide de structure cristalline, de groupe d’espace R3c, identique à celle de NBT pur. Pour les valeurs les plus élevées de x (Région II, pour x ≥ 0,15), le solide obtenu est une solution solide de structure cristalline, de groupe d’espace Pnma, identique à celle de CT pur. Enfin, entre ces deux domaines (Région III, 0,09 ≤ x ≤ 0,13), les solides obtenus sont biphasés, R3c + Pnma, en se limitant aux appellations des groupes d’espacé des phases formées. Dans la région I, lors du chauffage, la séquence des transitions de phases R3c → P4bm → Pm3m est mise en évidence; les températures des transitions se déplacent vers les plus basses températures quand la concentration en Ca2+ augmente. Les solides sont ferroélectriques à l’ambiante puis développent un caractère relaxeur, par coexistence de deux phases, avec l’augmentation de la température. Dans la région II, les solides révèlent un comportement relaxeur dès l’ambiante. Une transition de phase diffuse au sein de la phase orthorhombique Pnma est toutefois mise en évidence ; le solide passe d’un état relaxeur à un état paraélectrique tout en conservant, a priori, la même structure cristalline. Le phénomène de relaxation dans ces composés est expliqué par la formation de micros ou nanorégions polaires. La région III, quant à elle, est caractérisée par l’apparition d’une hystérésis thermique mise en évidence pour la première fois ; elle est expliquée par la relation entre la microstructure cristalline et les propriétés diélectriques. Enfin, l’ensemble de nos résultats a été regroupé dans un diagramme de phase original en composition et en température. / The solid solutions (1-x)Na0,5Bi0,5TiO3 (NBT) – xCaTiO3 (CT) were studied by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, impedance spectroscopy and DSC. These materials have a perovskite crystalline structure. This study reveals not only the complexity but also the richness of physical phenomena in these compounds: phases transitions sequences, the Ca2+ effect on the physical-chemistry properties and the relation between dielectric properties and crystalline structure. Thereby, (1-x)NBT – xCT solid solutions (0 ≤ x ≤ 1.00) were synthesized by chemical solid route, then they were sintered by a particular procedure in order to avoid sodium and bismuth volatilization. The solid crystalline characteristics obtained prove clearly the necessity to distinguish three fields as a function of x values. First of all, for increasing x at room temperature, there is a first region so called region I (x ≤ 0.07), wherein the crystalline structure of solid solutions obtained has a space group R3c identical to that of pure NBT. For the highest values of x, (Region II, x ≥ 0.15), the solid obtained has a space group Pnma, identical to that of pure CT. Finally, between these two regions, (0.09 ≤ x ≤ 0.13), the solid solutions obtained are biphasic, R3c + Pnma, limited to appellations of the space groups formed phases. In region I, upon heating, phase transition sequence R3c → R3c + Pnma → Pnma was determined; the corresponding transition temperatures move to low values with increasing Ca2+ concentration. These solids are ferroelectric at room temperature and then develop a relaxor character, by coexistence of two phases, with increasing temperature. In region II, these solids reveal a relaxor behavior at room temperature. However, a diffuse phase transition within the orthorhombic phase Pnma has been identified; the solid changes from relaxor to paraelectric while maintaining the same crystal structure. This phenomenon was explained by the formation of micro or nano-polar regions. Region III, demonstrated for the first time, is characterized by thermal hysteresis, and explained by the relation between crystalline microstructure and dielectric properties. Finally, all our results were assembled in an original phase diagram as a function of concentration of Ca2+ dopant and temperature.

No description available.

Single self-assembled semiconductor quantum dots (QDs) are able to emit single-photons and entangled-photons pairs. They are therefore considered as potential candidate building blocks for quantum information processing (QIP) and communication. To exploit them fully, the ability to precisely control their optical properties is needed due to several reasons. For example, the stochastic nature of their growth ends up with only little probability of finding any two or more QDs emitting indistinguishable photons. These are required for two-photon quantum interference (partial Bell-state measurement), which lies at the heart of linear optics QIP. Also, most of the as-grown QDs do not fulfil the symmetries required for generation of entangled-photon pairs. Additionally, tuning is required to establish completely new systems, for example, 87Rb atomic-vapors based hybrid semiconductoratomic (HSA) interface or QDs with significant heavy-hole (HH)-light-hole (LH) mixings. The former paves a way towards quantum memories and the latter makes the optical control of hole spins much easier required for spin- based QIP. This work focuses on the optical properties of a new type of QDs optimized for HSA experiments and their broadband tuning using strain. It was created by integrating the membranes, containing QDs, onto relaxor-ferroelectric actuators and was quantified with a spatial resolution of ~1 µm by combining measurements of the µ-photoluminescence of the regions surrounding the QDs and dedicated modeling. The emission of a neutral exciton confined in a QD usually consists of two fine-structure-split lines which are linearly polarized along orthogonal directions. In our QDs we tune the emission energies as large as ~23meV and the fine-structure-splitting by more than 90 µeV. For the first time, we demonstrate that strain is able to tune the angle between the polarization direction of these two lines up to 40° due to increased strain-induced HH-LH mixings up to ~55%. Compared to other quantum emitters, QDs can be easily integrated into optoelectronic devices, which enable, for example, the generation of non-classical light under electrical injection. A novel method to create sub-micrometer sized current-channels to efficiently feed charge carriers into single QDs is presented in this thesis. It is based on focused-laserbeam assisted thermal diffusion of manganese interstitial ions from the top GaMnAs layer into the underlying layer of resonant tunneling diode structures. The combination of the two methods investigated in this thesis may lead to new QDbased devices, where direct laser writing is employed to preselect QDs by creating localized current-channels and strain is used to fine tune their optical properties to match the demanding requirements imposed by QIP concepts.