In this episode, we discuss the use of primary and secondary sources in the elementary social studies classroom. We explore the definitions for both primary and secondary sources, examine how they are connected to K-5 standards and curriculum frameworks, and visit various digital resources where teachers can find engaging primary sources for their students. / https://dc.etsu.edu/social-studies-education-oer/1003/thumbnail.jpg

In time, more historical documents have become accessible through various technological modes including the Internet, CD-ROMs, and local databases. Teachers are now able to infuse a rich variety of resources into lessons with relative ease. This study measured expert historian heuristics in secondary students engaged in analysis of technologically-enhanced historical documents relating to women in the early United States republic. Nine 10th grade Advanced Placement world history students from an urban high school in the southeastern United States were assigned randomly to one of three conditions: paper historical documents, HTML historical documents, and HTML historical documents with simulated, limited Internet access. Using a think-aloud protocol developed by Jonassen et al. (1999), the qualities and frequencies of expert historian heuristics were measured. The findings support and enhance previous research related to how secondary students learn history while performing a task using primary and secondary source documents and the effects of hypermedia technology. Most of the time, students engaged in a simplistic read-and-react pattern, except for two participants who recognized greater levels of subtext. The two students account for slightly more than 50% of all heuristics. Moreover, the students in general failed to perceive nuances between the documents, engaged in presentism, and viewed history as a uniform expansion of civil rights and increased opportunities. However, all the participants achieved some level of understanding indicating that women enjoyed fewer rights than their white, male counterparts. In the HTML groups, the participants moved within and between the documents with greater frequency and nonlinearly. While in the Internet group, forays to the simulated Internet invoked a high proportion of expert heuristics and resulted in statements of clear understanding. The results imply that computer technologies promote authenticity and learner control. Furthermore, expert heuristics can help students manage information from the Internet. In addition, the paucity of heuristics exhibited by most subjects suggests a lack of prior knowledge and inexperience with historical documents. This may be a result of the way history is taught in the schools. The results are discussed within the framework of previous research and the cultural wars.

Historians use different types of sources when reconstructing the past. of the two major categories of sources, the primary sources are of major importance for attaining information, as they are contemporary to the period which is being researched. They are often more reliable than the other category, namely secondary sources, which are literally second-hand information. However, all possible sources, both primary and secondary, must be approached critically so as to obtain a balanced version of the past. In the South African situation, for an extensive period of time, most of the historical writing on the early periods was based on the records which were made by the Europeanoriginated Whites who had the advantage of being able to put their accounts in writin~. This led to the European-White perspective dominating and monopolising the historiographical stage for quite a long time. The perspective of the indigenous inhabitants of South Africa had been overshadowed owing to their inability to read and write. The written sources on the Blacks in South Africa date back to the time when the first Europeans set foot here. The early European travellers (traders, hunters, natural scientists, etc.) came into contact with the Black communities and they made records on them. Obviously these travellers based such records on their own interests and also wrote from a Eurocentric position, with cultural differences as well as racial prejudices and superior attitudes towards the Blacks. The missionaries, who were mostly of European origin, also made records about the Blacks among whom they worked. The missionaries also had their own agenda, although different from that of the travellers. The records which they kept mostly reflected their "fight" against what they thought were barbaric and backward ways of the Blacks' lifestyle. In addition to the records made by the early travellers and missionaries about the Blacks, there were records which were made by the Boer and British government officials. In this study the official records pertaining to the Blacks in the Transvaal between 1902 and 1907 are discussed. Firstly, a historiographical overview is presented and secondly, the official records themselves are analysed and evaluated. The importance of those records as sources of information on the Blacks in the Transvaal, especially the Northern Sotho, is evaluated by using different criteria, including the Principle of internal criticism. There are numerous flaws and limitations found in these records about Blacks such as cultural differences, subjectivity, prejudice, bias, etc. However, even though these records contain such flaws, they are still important sources of information. Their most important value is that they form the basis and point of departure from where historical reconstruction is made. Research, even in future, would still heavily depend on these records as sources of information. But, as already pointed out, the information obtained in them has to be tested by different criteria in order to detect the limitations, so that a more balanced reconstructions can be achieved. / Dissertation (MA)--University of Pretoria, 2001. / gm2014 / Historical and Heritage Studies / Unrestricted

No description available.

Persistent organic pollutants (POPs) are hydrophobic substances that readily sorb to organic matter in particles and colloids instead of being freely dissolved in the water phase. This sorption affects the bio­availability and environmental transport of the POPs. The major part of this thesis concerns the role of sediments as secondary sources of POPs. As the primary emissions decrease, contaminated sediments where POPs have accumulated can become the main source of contamination. If the contaminated sediment by time becomes covered with cleaner layers, the POPs are buried and no longer in contact with the aquatic environment. Experiments in this thesis showed, however, that new invading species can alter the sediment-water dynamics as a result of their bioturbation, i.e. mixing of sediment particles and pore-water. Marenzelleria spp., invading species in the Baltic Sea that burrow deeper than native species, were found to increase the remobilization of buried contaminants. The sediment-to-water flux was inversely related to the burial depth (2-10 cm) of the POP congeners (polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers) and also inversely related to the hydrophobicity of the congener. The flux was therefore most pronounced for less hydrophobic contaminants, which was linked to the bioirrigating behaviour of these species. Marenzelleria spp. also accumulated the buried POPs and increased concentrations in surface sedi­ment. Contaminants previously considered buried at a ’safe’ depth can thus be remobilized as a result of the invasion of Marenzelleria spp. in the Baltic Sea. One method to decrease the remobilization of contaminants from sediments is ’capping’, i.e. a layer of clean material is placed as a cap on the sediment. By amending the cap with active materials, which sequester the POPs and decrease their availability, thinner layers can be used (’active capping’ or ’thin-layer capping’). Results from an experiment with thin-layer capping using different active materials (activated carbon (AC) and kraft lignin) showed that both the sediment-to-water flux and the bioaccumulation by benthic species of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), hexachlorobenzene (HCB) and octachlorostyrene (OCS) decreased with increased thick­ness of the cap layer (0.5-5 cm). Amendments with active materials further increased the cap efficiency. AC was more efficient than kraft lignin, and a 3 cm cap with 3.3% AC reduced the flux and bioaccumulation with ~90%. The reduction of the sediment-to-water flux was inversely related to the hydrophobicity of the POP, and reductions in the flux had similar magnitudes as reductions in the concentration in deep-burrowing polychaetes, demonstrating the importance of bioturbation for sediment-to-water transport. In a one-year study on the levels of PCDD/Fs, PCBs, and HCB in a coastal area of the Baltic Sea, the correlations between the POP levels and the levels of particles and organic carbon in the water were found to differ for POPs of different structure and hydrophobicity. The levels of PCDD/Fs decreased to one third in May, which could be related to the increased sedimentation, i.e. water-to-sediment transport, during spring bloom.

[ES] Esta Tesis Doctoral se centra en la recuperación mediante electrodeposición del Sb presente en un efluente residual proveniente de la metalurgia del cobre. El efluente en el que se basa este estudio se produce en el proceso de regeneración con HCl concentrado de las resinas de intercambio iónico de una de las subetapas del electro-refinado del cobre. Se trata de un electrolito ácido que contiene diversas impurezas, entre las que destacan, Sb y Bi, que son considerados materias primas críticas por la Unión Europea, debido al riesgo de suministro que presentan y a su importancia en la economía. El objetivo de esta Tesis es la recuperación del Sb y la reutilización del HCl. Para alcanzar ambos propósitos se ha estudiado el empleo de la electrodeposición como operación de separación para el tratamiento del efluente. Este proceso se ha investigado mediante técnicas electroquímicas, en particular, voltametría cíclica y de barrido lineal. En primer lugar, se ha realizado el estudio con disoluciones sintéticas que emulan el efluente generado en las metalurgias chilenas. La caracterización electroquímica de la disolución de Sb en medio HCl ha evidenciado que la reducción del Sb(III) a Sb metálico está limitada por la transferencia de materia y que una concentración elevada de HCl favorece la recuperación del Sb. Los ensayos de electrodeposición han destacado la relevancia de las reacciones secundarias, la reacción de evolución del hidrógeno (HER) y la generación de cloro, y su influencia negativa sobre la deposición de Sb. La HER tiene lugar en el cátodo y conlleva la generación de burbujas de hidrógeno a elevadas densidades de corriente, que reducen la superficie útil del electrodo de trabajo e incluso causan el desprendimiento del depósito de Sb. Por su parte, la generación de cloro gas en el ánodo provoca la redisolución de los depósitos de Sb desprendidos a causa de la HER. Tras la realización de estos ensayos se ha concluido que se puede aumentar la tasa de recuperación de Sb si se tienen mayores concentraciones del elemento en la disolución o si se mejoran las condiciones hidrodinámicas. Se ha analizado también cómo influye la presencia de Bi en la disolución sintética durante la electrodeposición del Sb. El potencial de reducción de ambos elementos es similar, lo que implica que la recuperación individual de Sb sea compleja. No obstante, si se trabaja bajo condiciones en las que no se supere la densidad de corriente límite del sistema, se logra una elevada selectividad hacia el Sb. Si la concentración de Bi en la disolución es superior a la de Sb, se electrodepositan ambos elementos, pero se logra un elevado valor de eficiencia de corriente debido a que la influencia de la HER sobre el Bi no es tan fuerte. A continuación, se ha estudiado la aplicación de las técnicas previamente analizadas con un efluente real, facilitado por una empresa española. Se ha verificado que las conclusiones obtenidas con las disoluciones sintéticas son aplicables al efluente real. En particular, se ha confirmado que, al aumentar la densidad de corriente aplicada, la deposición de Sb se ve mermada debido a la relevancia del resto de reacciones: la reducción de los demás elementos y la evolución del medio. Los depósitos obtenidos contienen algunos de los elementos presentes en el efluente real: Sb, Bi, As y Cu, siendo mayoritario el primero. Como resultado, se ha concluido que es posible purificar el HCl mediante la electrodeposición de los elementos contenidos en el electrolito. Finalmente, se ha planteado la posibilidad de sustituir el HCl empleado como regenerante por un disolvente eutéctico profundo, debido a la alta solubilidad de metales y su procedencia de fuentes renovables. En particular, la investigación se ha llevado a cabo con la oxalina, la cual presenta una elevada capacidad de disolución para el Sb y una amplia ventana de potencial que beneficiaría la aplicación de la técnica de electrodeposición para la recuperación del Sb. / [CA] Esta Tesi Doctoral se centra en la recuperació mitjançant electrodeposició del Sb present en un efluent residual provinent de la metal·lúrgia del coure. L'efluent en què es basa este estudi es produïx en el procés de regeneració amb HCl concentrat de les resines d'intercanvi iònic d'una de les subetapes de l'electro-refinat del coure. Es tracta d'un electròlit àcid que conté diverses impureses, entre les quals destaquen, Sb i Bi, que són considerats matèries primeres crítiques per la Unió Europea, a causa del risc de subministrament que presenten i a la seua importància en l'economia. L'objectiu d'esta Tesi és la recuperació del Sb i la reutilització de l'HCl. Per assolir aquests dos propòsits s'ha estudiat l'ús de l'electrodeposició com a operació de separació per al tractament de l'efluent. Este procés s'ha investigat mitjançant tècniques electroquímiques, en particular, voltametria cíclica i de rastreig lineal. En primer lloc, s'ha realitzat l'estudi amb dissolucions sintètiques que emulen l'efluent generat a les metal·lúrgies xilenes. La caracterització electroquímica de la dissolució de Sb en medi HCl ha evidenciat que la reducció del Sb(III) a Sb metàl·lic està limitada per la transferència de matèria i que una concentració elevada de HCl afavorix la recuperació del Sb. Els assajos d'electrodeposició han destacat la rellevància de les reaccions secundàries, la reacció d'evolució de l'hidrogen (HER) i la generació de clor, i la seua influència negativa sobre la deposició de Sb. La HER té lloc al càtode i comporta la generació de bambolles d'hidrogen a elevades densitats de corrent, la qual cosa reduïx la superfície útil de l'elèctrode de treball i fins i tot causa el despreniment del depòsit de Sb. Per la seua banda, la generació de clor gas a l'ànode provoca la redissolució dels depòsits de Sb despresos a causa de la HER. Després de la realització d'estos assajos s'ha conclòs que es pot augmentar la taxa de recuperació de Sb si es tenen majors concentracions de l'element en la dissolució o si es milloren les condicions hidrodinàmiques. S'ha analitzat també com influïx la presència de Bi en la dissolució sintètica durant l'electrodeposició del Sb. El potencial de reducció dels dos elements és similar, la qual cosa implica que la recuperació individual de Sb siga complexa. No obstant això, si es treballa sota condicions en què no se supere la densitat de corrent límit del sistema, s'aconseguix una elevada selectivitat cap al Sb. Si la concentració de Bi en la dissolució és superior a la de Sb, s'electrodepositen ambdós elements, però s'aconseguix un elevat valor d'eficiència de corrent pel fet que la influència de la HER sobre el Bi no és tan forta. A continuació, s'ha estudiat l'aplicació de les tècniques prèviament analitzades amb un efluent real, facilitat per una empresa espanyola. S'ha verificat que les conclusions obtingudes amb les dissolucions sintètiques són aplicables al efluent real. En particular, s'ha confirmat que, en augmentar la densitat de corrent aplicada, la deposició de Sb es veu minvada a causa de la rellevància de la resta de reaccions: la reducció dels altres elements i l'evolució del medi. Els depòsits obtinguts contenen alguns dels elements presents en el efluent real: Sb, Bi, As i Cu, sent majoritari el primer. Com a resultat, s'ha conclòs que és possible purificar l'HCl mitjançant l'electrodeposició dels elements continguts en l'electròlit. Finalment, s'ha plantejat la possibilitat de substituir l'HCl emprat com regenerant per un dissolvent eutèctic profund, a causa de l'alta solubilitat de metalls i la seua procedència de fonts renovables. En particular, la investigació s'ha dut a terme amb l'oxalina, la qual presenta una elevada capacitat de dissolució per al Sb i una àmplia finestra de potencial que beneficiaria l'aplicació de la tècnica d'electrodeposició per a la recuperació del Sb captat durant el procés de regeneració de les resines. / [EN] This Doctoral Thesis focuses on the recovery by electrodeposition of Sb present in an effluent from the copper metallurgy. The effluent on which this study is based is generated during the regeneration with concentrated hydrochloric acid of the ion exchange resins used in one of the sub-stages of copper electro-refining. It is an acid electrolyte containing several impurities, among them, Sb and Bi, which are considered critical raw materials by the European Union due to their supply risk and economic relevance. The aim of this Thesis is the recovery of Sb and reuse of HCl. To achieve both objectives, electrodeposition has been studied as a separation operation for the treatment of the effluent. This operation has been investigated through electrochemical techniques, primarily, cyclic and linear sweep voltammetry. First, the study has been conducted with synthetic solutions emulating the effluent generated in the Chilean metallurgy industries. The electrochemical characterization of the Sb solution in the HCl medium has shown that, mass-transfer limits the reduction of Sb(III) to metallic Sb and a high HCl concentration favors the recovery of Sb. From the electrodeposition tests the relevance and negative influence on Sb deposition of the secondary reactions, the hydrogen evolution reaction (HER) and the chlorine generation, has been proven. The HER occurs at the cathode and involves the generation of hydrogen bubbles at high current densities, which decrease the effective surface area of the working electrode and even cause the detachment of the Sb deposits. The chlorine generation at the anode leads to the redissolution of the Sb deposits detached by the HER. After conducting these experiments, it has been concluded that it is possible to increase the Sb recovery rate, if higher concentrations of this element are present in the solution or the hydrodynamic conditions of the electrodeposition process are improved. The influence of the presence of Bi in the synthetic solution on the Sb electrodeposition has also been investigated. The reduction potential of both elements is similar, implying that the individual recovery of Sb by electrodeposition is challenging. However, if the operating conditions do not imply exceeding the limiting current density of the system, a high electrodeposition selectivity towards Sb is achieved. If the concentration of Bi in the solution is higher than that of Sb, the simultaneous electrodeposition of both elements takes place, but, on the contrary, a high value of current efficiency is obtained because the influence of the HER on Bi reduction is not as significant as that on Sb deposition. The application of the previously analyzed techniques has been studied with a real effluent, that was provided by a Spanish company. It has been proven that the conclusions obtained with the synthetic solutions can be applied to a real effluent. It has been confirmed that, as the applied current density increases, the Sb deposition worsens due to the relevance of the other reactions that take place during the process: the reduction of the other elements and the evolution of the medium. The deposits obtained contain some elements present in the real effluent: Sb, Bi, As and Cu, the most significant being the first. From this study, it has been concluded that purifying the HCl by removing the elements contained in the electrolyte via electrodeposition is possible. Finally, the possibility of replacing the HCl used as a regenerant with a deep eutectic solvent has been considered based on their properties, among which are a high solubility of metals and their synthesis from renewable sources. In particular, the research has been carried out with oxaline, which presents a high dissolution capacity for Sb and a wide potential window that would benefit the application of the electrodeposition technique to recover Sb captured during the resins regeneration process. / Me gustaría agradecer la financiación a la Agencia Estatal de Investigación (AEI/10.13039/501100011033) (España) bajo el proyecto PCI2019-103535, gracias al cual he podido desarrollar la presente Tesis Doctoral, y a FEDER Una manera de hacer Europa / Hernández Pérez, L. (2024). Estudio electroquímico para la recuperación de antimonio de efluentes del electro-refinado de cobre por electrodeposición [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/203892