Use of soil retaining walls for roads, embankments and bridges is increasing with time and reinforced soil retaining walls are found to be very efficient even under critical conditions compared to unreinforced walls. They offer competitive solutions to earth retaining problems associated with less space and more loads posed by tremendous growth in infrastructure, in addition to the advantages in ease and cost of construction compared to conventional retaining wall systems. The study of seismic performance of reinforced soil retaining walls is receiving much attention in the light of lessons learned from past failures of conventional retaining walls. Laboratory model studies on these walls under controlled seismic loading conditions help to understand better how these walls actually behave during earthquakes. The objective of the present study is to investigate the seismic response of geosynthetic reinforced soil wall models through shaking table tests. To achieve this, wrap faced and rigid faced reinforced soil retaining walls of size 750 × 500 mm in plan and 600 mm height are built in rigid and flexible containers and tested under controlled dynamic conditions using a uni-axial shaking table. The effects of frequency and acceleration of the base motion, surcharge pressure on the crest, number of reinforcing layers, container boundary, wall structure and reinforcement layout on the seismic performance of the retaining walls are studied through systematic series of shaking table tests. Results are analyzed to understand the effect of each of the considered parameters on the face displacements, acceleration amplifications and soil pressures on facing at different elevations of the walls. A numerical model is developed to simulate the shaking table tests on wrap faced reinforced soil walls using a computer program FLAC (Fast Lagrangian Analysis of Continua). The experimental data are used to validate the numerical model and parametric studies are carried out on 6 m height full-scale wall using this model. Thus, the study deals with the shaking table tests, dynamic response of reinforced walls and their numerical simulation. The thesis presents detailed description of various features and various parts of the shaking table facility along with the instrumentation and model containers. Methodology adopted for the construction of reinforced soil model walls and testing procedures are briefly described. Scaling and stability issues related to the model wall size and reinforcement strength are also discussed. From the study, it is observed that the displacements are decreasing with the increase in relative density of backfill, increase in surcharge pressure and increase in number of reinforcing layers; In general, accelerations are amplified to the most at the top of the wall; Behaviour of model walls is sensitive to model container boundary. The frequency content is very important parameter affecting the model response. Further, it is noticed that the face displacements are significantly affected by all of the above parameters, while the accelerations are less sensitive to reinforcement parameters. Even very low strength geonet and geotextile are able to reduce the displacements by 75% compared to unreinforced wall. The strain levels in the reinforcing elements are observed to be very low, in the order of ±150 micro strains. A random dynamic event is also used in one of the model tests and the resulted accelerations and displacements are presented. Numerical parametric studies provided important insight into the behaviour of wrap faced walls under various seismic loading conditions and variation in physical parameters.

The city of Wellington has a high population concentration and lies within a geologically active landscape at the southern end of the North Island, New Zealand. Wellington has a high seismic risk due to its close proximity to several major fault systems, with the active Wellington Fault located in the north-western central city. Varying soil depth and properties in combination with the close proximity of active faults mean that in a large earthquake rupture event, ground shaking amplification is expected to occur in Thorndon, Te Aro and around the waterfront. This thesis focuses on the area bounded by Thorndon Overbridge in the north, Wellington Hospital in the south, Kelburn in the west, and Oriental Bay in the east. It includes many of the major buildings and infrastructural elements located within the central Wellington commercial area. The main objectives were to create an electronic database which allows for convenient access to all available data within the study area, to create a 3D geological model based upon this data, and to define areas of different seismic subsoil class and depth to rock within the study area at a scale that is useful for preliminary geotechnical analysis (1:5,000. Borelogs from 1025 holes with accompanying geological and geotechnical data obtained from GNS Science and Tonkin & Taylor were compiled into a database, together with the results from SPAC microtremor testing at 12 sites undertaken specifically for this study. This thesis discusses relevant background work and defines the local Wellington geology. A 3D geological model of the central Wellington commercial area, along with ten ArcGIS maps including surficial, depth to bedrock, site period, Vs30, ground shaking amplification hazard and site class (NZS 1170.5:2004) maps were created. These outputs show that a significant ground shaking amplification risk is posed on the city, with the waterfront, Te Aro and Thorndon areas most at risk.

The research presented in this thesis investigated the functional morphology in root<br />systems in relation to their role in providing anchorage and stability for the plant. The<br />anchorage of different types of root systems was investigated as well as the influence of<br />several environmental factors on their development. The research presented in this study<br />was completed by carrying out a series of modelling, glasshouse and field experiments<br />using physical models and real plants.<br />Model experiments showed that solid shapes like bulbs are very well suited to resist<br />vertical upward forces, i.e. uprooting, and shed some light on the mechanism of<br />anchorage in bulbs. The results of this laboratory study showed that the concept of<br />optimal bulb shape for resisting uprooting is viable. Uprooting tests on real bulb plants<br />confirmed the theoretical predictions about it, and showed the importance of bulbs in<br />anchorage. This study also proved that the soil type is very important when considering<br />the anchorage of solid forms such as the bulbs.<br />A second model study showed that the simplest models of tap root-dominated root<br />systems increase their resistance to overturning with the third and second power of the<br />embedment depth in cohesionless and in cohesive soil respectively. Anchorage strength<br />of a root system dominated by a tap root will be maximised with minimum investment<br />in structural material if the rigid tap root is extended to the largest possible depth.<br />Glasshouse experiments investigated the effects of soil compaction and temperature,<br />two of the most important environmental factors, on the axial and lateral development<br />and growth of the root systems of two species of young pines. It was shown that the rate<br />of root axial development in both investigated species decreased with an increase in soil<br />compaction whereas the lateral proliferation of their roots systems was not significantly<br />affected by soil consistency. A temperature of around 15°C seemed to be optimal for the<br />root elongation rate since the increase in axial length of the roots of both species was<br />largest at this temperature.<br />The effect of mechanical stimulation as a factor in shaping the root systems of plants<br />was also investigated. Apart from the changes caused to the parts of the tree above<br />ground, unidirectional periodical flexing induced an increase in total root CSA and<br />larger biomass allocation to the roots parallel to the plane of flexing which, in turn,<br />resulted in a larger number of major lateral roots with larger CSA in the plane of<br />flexing.<br />Mechanical and morphological field studies on two Pinus species investigated the<br />anchorage of plate root systems and showed that lateral roots in older trees are not the<br />major source of root anchorage in either of the species; although in both species a<br />certain asymmetry in the distribution of major lateral root CSA was recorded, it was not<br />significantly correlated to the asymmetry in anchorage.

No description available.

Οι κατασκευές εδαφικής αντιστήριξης εξακολουθούν να βρίσκονται σε ευρύτατη χρήση, με διαρκώς αυξανόμενο ενδιαφέρον λόγω των απαιτήσεων των σύγχρονων έργων υποδομής αλλά και των αναγκών δόμησης σε πυκνό αστικό περιβάλλον. Το ενδιαφέρον εστιάζεται σε κατασκευαστικές λύσεις και μεθόδους σχεδιασμού που συνδυάζουν ασφάλεια και οικονομία. Η ανάλυση των συγκεκριμένων κατασκευών αντιμετωπίζει πλήθος δυσεπίλυτων προβλημάτων στο αντικείμενο της αλληλεπίδρασης εδάφους-κατασκευής που συχνά καθορίζουν τη συμπεριφορά του έργου. Η κατανόηση αυτών των μηχανισμών επιτρέπει το σχεδιασμό με μικρότερα περιθώρια αβεβαιότητας που οδηγούν σε οικονομικότερες και ορθολογικότερες λύσεις. Στην κατεύθυνση αυτή συμβάλει η παρούσα Διατριβή, με την ανάπτυξη αναλυτικών εργαλείων και θεωρητικών ευρημάτων που βοηθούν στην κατανόηση των μηχανισμών της αλληλεπίδρασης και στην εκτίμηση της συμπεριφοράς των τοίχων αντιστήριξης υπό συνδυασμένη βαρυτική και σεισμική φόρτιση. Έμφαση δίνεται στην παραγωγή απλών κλειστών λύσεων και μεθοδολογιών για τον υπολογισμό των εδαφικών ωθήσεων και τη στατική ανάλυση του συστήματος τοίχου εδάφους. Συγκεκριμένα, παράγονται λύσεις άνω και κάτω ορίου για ενδόσιμους τοίχους, οι οποίες, παρότι προσεγγιστικές, πλεονεκτούν έναντι των κλασικών εξισώσεων Coulomb και Mononobe-Okabe τις οποίες μπορούν να αντικαταστήσουν. Σε ειδικές περιπτώσεις, όπως η περίπτωση τοίχων προβόλων με πεπλατυσμένο πέλμα, οι προτεινόμενες λύσεις οδηγούν σε ακριβή αποτελέσματα που βασίζονται σε ένα γενικευμένο πεδίο τάσεων Rankine. Επίσης παρουσιάζονται επεκτάσεις τους οι οποίες επιτρέπουν τον υπολογισμό μη-υδροστατικών κατανομών ωθήσεων γαιών λαμβάνοντας υπόψη την κυματική διάδοση της σεισμικής διέγερσης στο επίχωμα, σύμφωνα με μια ορθότερη παραλλαγή της ιδέας των Steedman & Zeng και τις διαφορετικές κινηματικές συνθήκες που προέρχονται από την απόκριση του τοίχου με περιστροφή περί την κορυφή ή τη βάση σύμφωνα με την τεχνική της Dubrova. Για την περίπτωση ανένδοτων τοίχων παρουσιάζεται μεθοδολογία για τη δραστική απλοποίηση των διαθέσιμων ελαστοδυναμικών, κυματικών λύσεων, όπως αυτή των Veletsos & Younan, η οποία καταλήγει σε κλειστές μαθηματικές εκφράσεις για τον υπολογισμό των ωθήσεων. Τέλος, παρουσιάζονται νέα ευρήματα στην κατεύθυνση της μαθηματικής αντιμετώπισης του δυσεπίλυτου προβλήματος της οριακής ισορροπίας ριπιδίου τάσεων σε εδαφικό μέσο στο οποίο ενεργούν βαρυτικές και αδρανειακές δυνάμεις πεδίου. Η παρούσα εργασία συμβάλλει στην περαιτέρω διερεύνηση του προβλήματος το οποίο θεμελίωσαν θεωρητικά οι Levy, Boussinesq, von Karman και Caquot, μέσω της δραστικής (αλλά ακριβούς) απλοποίησης του σε μία μη-γραμμική συνήθη διαφορική εξίσωση, η οποία επιτρέπει την επίλυση με απλές αριθμητικές και ημιαναλυτικές τεχνικές. Πέρα από τα ακριβή αριθμητικά αποτελέσματα, η προτεινόμενη ανάλυση προσφέρει μια βαθύτερη εποπτεία στο πρόβλημα και ανοίγει το δρόμο για περαιτέρω διερεύνηση ή και επέκταση της μεθόδου πέρα από τα όρια της κλασικής οριακής ανάλυσης. Η αξιοπιστία των προτεινόμενων λύσεων ελέγχεται μέσω συγκρίσεων με καθιερωμένες λύσεις και πειραματικά δεδομένα από τη βιβλιογραφία, αλλά και πρόσφατα πειραματικά αποτελέσματα που παρήχθησαν από τον συγγραφέα και ερευνητές στη σεισμική τράπεζα του Πανεπιστημίου του Bristol του Ηνωμένου Βασιλείου. / Earth retaining structures are still in widespread use, with growing interest due to the demands of modern infrastructure and building needs in a dense urban environment. Building solutions and design methodologies that combine safety and economy are the objectives of modern research. Significant difficulties in the analysis of retaining structures arise from the soil-structure interaction nature of the problem that often prescribes its behavior. Understanding these mechanisms allows design under smaller uncertainties, leading to economical and rational solutions. The contribution of the present thesis consists of the development of analytical tools and theoretical findings, helpful in understanding the mechanisms of interaction and the behavior of walls under combined gravity and seismic loading. Emphasis is given to the derivation of simple closed-form solutions and methodologies for the calculation of earth pressures and the static analysis of wall-soil system. Specifically, approximate Lower and Upper Bound solutions are produced for the case of yielding walls, which are advantageous compared to the classical equations Coulomb and Mononobe-Okabe. In special cases, such as the L-shaped cantilever walls, these solutions lead to exact results, pertaining to a generalized Rankine stress field. Extensions of the above solutions are presented allowing the calculation of non-hydrostatic earth pressure distributions, due to the wave propagation of the seismic excitation in the backfill, according to a better variant of the Steedman & Zeng approach and different kinematic conditions of the wall rotating around the top or bottom, according to the technique of Dubrova. For the case of non-yielding walls, a new methodology for the drastic simplification of available wave solutions, such as the Veletsos & Younan, is presented which leads to closed-form expressions for the dynamic pressure calculation. Finally, new theoretical findings are presented for the mathematical treatment of the intractable problem of plastic limit equilibrium in soil medium subjected to gravitational and inertial forces field. This work contributes to the further investigation of the problem which is founded theoretically by Levy, Boussinesq, von Karman and Caquot, through the significant (but accurate) simplification to a single, non-linear ordinary differential equation, easier to handle by simple numerical and semi-analytical techniques. Apart from the exact numerical results, the proposed analysis provides a deeper physical insight, leading the way to further investigation or extension of the method beyond the classical limit analysis assumptions. The reliability of the proposed solutions is checked through comparisons with established solutions and experimental data from the literature and recent experimental results obtained by the author and researchers in the shake table laboratory of the University of Bristol, UK.

Les séismes constituent une source d’aléas importante pour l’étude de la vulnérabilité d’unbâtiment. Le comportement parasismique des bâtiments à ossatures en bois est particulièrementintéressant. Deux familles de structure à ossature en bois peuvent être distinguées : les ossaturesutilisant les produits industriels que sont les panneaux en bois reconstitué servant à contreventerla structure et les connecteurs métalliques, et les ossatures traditionnelles avec remplissage reposantsur des techniques de construction anciennes et dépendantes du contexte local. L’efficacitédu comportement parasismique des bâtiments à ossature en bois traditionnels avec remplissagereste encore peu reconnue en raison du manque de résultats issus des travaux de recherche.Les travaux présentés dans cette thèse visent ainsi à améliorer les connaissances sur le comportementparasismique de cette typologie constructive. Partant de l’hypothèse selon laquellece comportement est gouverné par la réponse des assemblages par connecteurs métalliques, uneapproche multi-échelles, couplant études expérimentales et études numériques est développée.Elle détaille l’analyse à l’échelle 1 de la connexion, en passant par l’échelle 2 des cellules élémentaires,constitutives des murs, par l’échelle 3 des murs de contreventement pour se finaliserà l’échelle 4 du bâtiment dans son ensemble.Sur le plan expérimental, cette approche permet d’une part, de réaliser des études paramétriqueset ainsi d’appréhender l’influence de la réponse de chaque élément (bois, clous, feuillard,remplissage, contreventement, ouvertures) sur le comportement local (échelles 1 et 2) et global(échelles 3 et 4) de la structure. D’autre part, elle permet de fournir une base de données pourla validation des modélisations numériques aux différentes échelles.Sur le plan de la modélisation numérique, cette approche multi-échelles est fondée sur la priseen compte du comportement non-linéaire hystérétique des assemblages à l’échelle supérieure, parl’intermédiaire d’un macro-élément, développé dans la cadre de la méthode des éléments finis.Ainsi, grâce à une modélisation simplifiée (assemblage des macro-éléments), le calcul est rapide,aussi bien à l’échelle du mur qu’à celle du bâtiment, et intègre les phénomènes non-linéaire locaux.Le modèle peut ainsi prédire de manière relativement précise le comportement dynamique de lastructure complète à l’échelle 4, testée sur table vibrante.L’étude présentée dans ce manuscrit fait partie des travaux précurseurs relatifs à l’analysede la vulnérabilité sismique des ossatures bois avec remplissage. Cette étude débouche sur denombreuses perspectives pour l’analyse de cette typologie constructive. Elle confirme que les bâtimentsà ossatures en bois avec remplissage ont un comportement parasismique très performant. / The seismic vulnerabilty is an important issue in the design of a building. The seismicresistant behavior of timber-framed structures is particularly relevant. Two types of timberframedstructures can be distinguished : the timber-framed structures using industrial products,such as wood-products panels used to brace the structure or metal fasteners, and traditionaltimber-framed structures included infill made of natuarl materials (earth or stones masonry).The seismic resistant behavior efficiency of traditional structures remains poorly recognizedbecause of the lack of research results on this kind of construction.Therefore, the thesis aims at improving the seismic behavior knowledge of timber-framedmasonry. Based on the assumption that their behavior is driven by the response of the metalfasteners connections, a multi-scale approach is proposed. It couples experimental and numericalstudies. At the scale 1 of the connection, at the scale 2 of the elementary constitutive cell ofwalls, at the scale 3 of structural elements such as shear walls and finally at the scale 4 of theentire building.In regards to the experimental work, this method allows, on the one hand, to perform parametricstudies and to analyze the influence of each element (wood member, nails, steel strip,infill, bracing, openings) on the local behavior (scales 1 and 2) and on the global behavior(scales 3 and 4) of the structure. On the other hand, it allows to provide a database to validatethe numerical modeling at each scale.In regards to the numerical work, this multi-scale approach allows to take into account thehysteretic behavior of joints in the development of a macro-element at the scale 2. Thus, thanksto a simplified finite element modeling (macro-element assembly), the computational cost islimited and it allows to take into account the local phenomena. The model is able to predictrelatively accurately the dynamic behavior at the scale 4 of the building, tested on a shakingtable.The study, presented herein, is one of the pioneer work that deals with the analysis of theseismic vulnerability of timber-framed structures with infill panels. This study provides outlookfor the analysis of this type of buildings. It confirms that the timbered masonry structures havea relevant seismic resistant behavior.

No description available.