Due to concerns for the environmental and sociological implications of hydrocarbon use, farmers have begun to examine renewable energies and conservation techniques for crop production. Historically, most of the energy needs for climate control in tunnel systems have been met via passive heating, with fossil fuels occasionally providing a supplementary heat source. Five heating techniques were examined for kale (Brassica oleracea) and summer squash (Cucurbita pepo) season extension. Treatments consisted of a low tunnel heated by a solar-powered electrical strip placed under a water tube, a low tunnel heated by a passively heated water tube, a low tunnel heated by an earth-to-air heat-exchange tube, a traditional low tunnel, and a control unprotected plot. Aerogel blankets and SolaWrap® floating covers were also examined as floating covers to protect crops from cold temperatures. To predict energy output, the USDA ARS Virtual Grower was compared against data from the tunneled treatments. Treatments were tested in fall 2020 and spring 2021 with data was collected for air, soil, and tube temperature (ºC), crop growing degree - days, squash seed germination and kale height (cm) and dry biomass (g). The electrically heated water tube produced the highest mean spring day air (28.2 ºC), fall soil temperatures (14.6ºC), thermal tube temperature for the 24 - hour, day and night timeframe for both seasons. However, for soil, the passively heated water tube showed the best results amongst the two seasons heating the soil surface at a 24 - hour mean of 13.8 ºC for fall and 18.2 ºC for spring. The earth tube warmed tunnel air in spring with a mean internal 24 - hour temperature of 19.5 ºC for spring against the 15.7 ºC recorded during fall, while providing the highest mean minimum temperatures. For growing degree-days, all treatments outperformed the uncovered control, with the earth tube treatment performing better for the kale degree day 24 - hour mean of 9.1 for fall 2020 against its spring output of 12.6. The electric heated thermal tube and earth tube improved germination of summer squash during the fall 2020 trial, while the passive tube positively influenced germination during the spring 2021. No differences were observed amongst the treatments in either season for final kale canopy height or dry biomass, though the earth tube displayed the highest range and means. However, kale plants were taller and had greater dry biomass when grown in spring compared to fall. Solar powered heated water tube, earth tube and passively heated water tube accelerated kale development in spring. For the floating cover trial, while the SolaWrap® had the highest mean 24-hour temperature 21.0 ºC, the aerogel blanket showed temperature parity in the daily minimum and night temperatures, and both mean and cumulative kale and summer squash growing degree-days. The Virtual Grower program produced a significantly higher mean and summative kJ output compared to collected by factoring climate, solar radiation, and wind speeds. In the fall study, light limitations arrested kale and squash production rather than a freezing event with treatments being more effective in spring due to increasing daylength. The most effective treatment for spring was the solar powered heated water tube because it provided a first harvestable kale and summer squash at 2-3 whole weeks before conventional spring harvesting, while the earth tube showed a better performance in degree-day accumulation for the cool season kale and warm season squash for the fall extension trial, each having a 24 - hour mean of 9.1 and 12.6. / Master of Science in Life Sciences / Due to both environmental and cost concerns regarding hydrocarbons, farmers have been searching for alternative heating methods to extend the crop season production. At the Virginia Tech Urban Horticulture Center three trials occurred to examine such methods. The first one occurred in spring 2020 and fall 2021 and examined non – hydrocarbon heating methods for low – tunnel systems. Said techniques were a control exposed plot, a simple low – tunnel system, a tunnel that utilized an earth tube, a low – tunnel that had a water tube and a low – tunnel that had a water tube that was warmed by a heating tape powered by solar panels. Crops grown were kale (Brassica oleracea) and summer squash (Cucurbita pepo). Data for this section included mean overall 24 – hour, mean 24 – hour minimum and 24 – hour maximum air temperatures along with mean 24 – hour soil temperatures (oC) with growing degree – days, seed germination, mean seed germination time and kale end season canopy height (cm) and dry biomass (g). The second trial compared the use of aerogels and SolaWrap® as a floating cover against both each other and an exposed plot by looking at their overall 24 – hour, mean 24 – hour minimum and 24 – hour maximum air temperatures. The third section of the trial looked at how the USDA – ARS Virtual Grower Program predicted the required heating output against manual equations from the data gathered in the first part of the trial. For the first section, the best performing systems regarding temperature were the solar powered heating tape due to its ability to store solar energy as well as the earth tube for utilizing a heat source not limited to the presence of the sun. This temperature performance also positively influenced crop germination and development, though the simple water tube also showed better performance. The second section of the trial showed that while the SolaWrap® had a higher overall 24 – hour mean and 24 – hour maximum temperature, the aerogel showed a higher heat retention by having both an equal and higher mean 24 – hour minimum temperature. For the third section, the Virtual Grower showed a higher kJ output requirements due to its ability to factor in location and past climactic activity, something that the manual calculations couldn't do. This trial showed that alternative heating methods, materials and calculations can enhance and extend production, though additional research on both costs and technique optimization are required.

This thesis is based on a project "Bifacial Photovoltaic Energy Production Analysis" to build a detailed simulation model system accurately simulate bifacial panel performance under real field radiation conditions and deployment configuration, and to predict its corresponding energy yield. To the author’s up-to-date knowledge, the model system is unpreceded among same type simulation software in complexity, details in consideration, ranges of deployment and parameters. The model system can also be used as a platform for more components and variables to be added on, such as adding on more rows of panel arrays to simulate bifacial solar farm scenario; and adding spectral information for more accurate analysis. The system components’ sub-models were carefully chosen based on a broad literature review in related aspects; especially in sky diffuse radiance, ground reflection, and bifacial solar cells. Built in MATLAB© based on mathematical expressions from above said models, the system consists of 5 bifacial panels and their racking as shading objects and the central panel performance is under investigation and has taken consideration of all possible panel azimuth and elevation combinations. Model simplification and resolution are carefully considered so to achieve a good balance in complexity, computation load and output accuracy. Output reliability is confirmed with other people’s work. Furthermore, the model has been fully checked and peer tested. Outputs under different parameter settings are analysed and discussed. Conclusions and recommended future work are provided at the end of the thesis.

Renewable energy studies are becoming increasingly important as world energy demand rises and current energy sources are increasingly questioned. Solar photovoltaics (PV) are the focus of this study as a renewable industry still in its infancy. This research examines the geography of solar panel installation and manufacturing from 2007 to 2010 in California and New York. California is the larger of the two markets and has implemented more policy support; programs that appear to have increased the pace of installations, reduce the size of the subsidy, and help lower total costs. Similar trends are observable in New York. US based companies are still making solar panels, but foreign competitors, most notably from China and Mexico, are capturing an increasing share of the market.

Climate change has already had major impacts on our planet. Loss of sea ice, accelerated sea level rise and longer, more intense heat waves, are a few of these. Many scientists believe that a continued climate change will have even more severe impact on our planet. To tackle the climate change, a fast transition towards renewable energy sources is necessary. One of the most promising sources of renewable energy is solar energy. To achieve the goal of making the world more reliable on solar energy, various actors try to improve the technology and the financial basis regarding this way of extracting energy. In this transition, calculations have to be as accurate as possible, in order to benefit from them when installing solar panels. This bachelor thesis intends to create an investment model for solar plants and an optimization of the plant’s size based on net present value. The model is built in Microsoft Excel, and factors such as electricity prices, electricity production/consumption and several others are taken into account. Based on the comparison with a case study and the calculations made by the model, the results suggest a reliable model. On behalf of Herrljunga Elektriska AB, the model is created to help them generate reliable and fast investment calculations, which will hopefully bring value to their business.

The Regional Council of Jämtland has a goal to increase the export of renewable energy and with that reduce the total greenhouse gas (GHG) emissions. One of the measures used to reach this goal is to give subsidies and tax reductions for investments in photovoltaics. Photovoltaics are generally perceived as “good for the environment” and give a “good image” to companies. They are marketed as interesting for private persons and farmers from a profitability point of view. Sweden has an electricity mix with average CO2 emissions of 20-30 g/kWh. Compared to other countries in Europe this is very low. The CO2 emissions of photovoltaics during their lifetime are 46 g/kWh according to the International Panel on Climate Change (IPCC). Taking this in consideration it can be concluded that photovoltaics actually increase GHG emissions as they have higher emissions of CO2 than the average in Sweden. When the decision to invest in photovoltaics is made with profitability as a main reason, it is debatable if the subsidies and tax reductions are needed. When the decision to invest in photovoltaics is made with environmental concern as a main reason, the subsidies might be given to other environmental technologies that are better from a climate perspective. Considering this, the push for profitability of photovoltaics can be seen as just another increase in consumption.

This thesis work presents an innovative solution for small satellite antennas by integrating slot antennas and solar cells on the same panel to save small satellite surface real estate and to replace deployed wire antennas for certain operational frequencies. The two main advantages of the proposed antenna are: 1) the antenna does not require an expensive deployment mechanism that is required by dipole antennas; 2) the antenna does not occupy as much valuable surface real estate as patch antennas. The antenna design is based on using the spacing between the solar cells to etch slots in these spaces to create radiating elements. The initial feasibility study shows it is realistic to design cavit-backed slot antennas directly on a solar panel of a cube satellite. Due to the volume of the satellite, it is convenient to design antennas at S band or higher frequencies. Although it is possible to design integrated solar panel antennas in lower frequencies, such research is not the scope of this thesis work. In order to demonstrate and validate the design method, three fully integrated solar panel antennas were prototyped using Printed Circuit Board (PCB) technology (PCB is a common solar panel material for small satellites). The first prototype is a circularly polarized antenna. The second is a linearly polarized two-element antenna array. The third prototype is a dual band linearly polarized antenna array. Measured results agree well with simulations performed using Ansoft's High Frequency Structure Simulater (HFSS). The thesis also presents a feasibility study of optimization methods and reconfigurable solar panel antenna arrays. The optimization study explores methods to use genetic algorithms to find optimal antenna geometry and location. The reconfigurable study focuses on achieving different antenna patterns by switching on and off the slot elements placed around the solar cells on solar panels of a cube satellite. It is shown that the proposed integrated solar panel antenna is a robust and cost-effective antenna solution for small satellites. It is also shown that given a solar panel with reasonable size, one can easily achieve multiple antenna patterns and polarization by simple switching.

The aim of the thesis is to design a method of recycling / reutilization of photovoltaic panels at the end of their service life. In the theoretical part is introduced and described photoelectric effect, history, development, production methods and types of photovoltaic panels. Furthermore, the composition and structure of photovoltaic panels are discussed and the technologies currently used for recycling these panels for maximum energy savings are specified. The experimental part of the work is mainly focused on the development of a prototype device, which can measure the current efficiency of the used photovoltaic panels, based on a comparative method, and quickly determine in the field conditions the future reusability of the solar panel.

The master´s thesis deals with a process called cold kinetic deposition technology. Using this technology, a copper layer was formed on a sample with an aluminium base by high-pressure cold spraying at a pressure of 25 bar. In the experimental part, the influence of corrosion degradation in the salt chamber was assessed at the time cycles of 100 h, 200 h and 300h, where changes in internal and surface resistances before and after corrosion were measured. Subsequently, the analysis of corrosion products was performed, where the extent of corrosion attack was determined using an electron microscope. These methods led to a final evaluation of the boundary limits of the applied coating layer by cold kinetic deposition, after the effect of corrosion. Finally, a theoretical application of this technology was suggested. It was discovered that the sample placed and left in the corrosion chamber for the longest time was the most affected by corrosion. Finally, a theoretical application of cold kinetic deposition was proposed.

The basic cube satellite (CubeSat) is a modern small satellite that has a standard size of about one liter (the 1U CubeSat). Three 1U CubeSats could be stacked to form a 3U CubeSat. Their low-cost, short development time, and ease of deployment make CubeSats popular for space research, geographical information gathering, and communication applications. An antenna is a key part of the CubeSat communication subsystem. Traditionally, antennas used on CubeSats are wrapped-up wire dipole antennas, which are deployed after satellite launch. Another antenna type used on CubeSats is the patch antenna. In addition to their low gain and efficiency, deployable dipole antennas may also fail to deploy on satellite launch. On the other hand, a solid patch antenna will compete for space with solar cells when placed on a CubeSat face, interfering with satellite power generation. Slot antennas are promising alternatives to dipole and patch antennas on CubeSats. When excited, a thin slot aperture etched on a conductive sheet (ground plane) is an efficient bidirectional radiator. This open slot antenna can be backed by a reflector or cavity for unidirectional radiation, and solar cells can be placed in spaces on the ground plane not occupied by the slot. The large surface areas of 3U CubeSats can be exploited for a multifunctional antenna by integrating multiple thin slot radiators, which are backed by a thin cavity on the CubeSat surfaces. Solar cells can then be integrated on the antenna surface. Polarization diversity and frequency diversity improve the overall performance of a communication system. Having a single radiating structure that could provide these diversities is desired. It has been demonstrated that when a probe excites a square cavity with two unequal length crossed-slots, the differential radiation from the two slots combines in the far-field to yield circular polarization. In addition, it has been shown that two equal-length proximal slots, when both fed with a stripline, resonate at a frequency due to their original lengths, and also resonate at a lower frequency due to mutual coupling between the slots, leading to a dual-band operation. The multifunctional antenna designs presented are harmonizations and extensions of these two independent works. In the multifunctional antenna designs presented, multiple slots were etched on a 83 mm x 340 mm two-layer shallow cavity. The slots were laid out on the cavity such when the cavity was excited by a probe at a particular point, the differential radiation from the slots would combine in the far-field to yield Left-Handed Circular Polarization (LHCP). Furthermore, when the cavity was excited by another probe at an opposite point, the slots would produce Right-Handed Circular Polarization (RHCP). In addition, as forethought, these slots were laid out on the cavity such that some slots were close together enough to give Linearly Polarized (LP) dual-band operation when fed with a stripline. This antenna was designed and optimized via computer simulations, fabricated using Printed Circuit Board (PCB) technology, and characterized using a Vector Network Analyzer (VNA) and NSI Far Field Systems.

The diploma thesis deals in the theoretical part with various types of sys-tems for the preparation of hot water and specifies the types of solar sys-tems. In the calculation part, it solves the design of kindergarten heating by a system of heating elements. It also solves two variants of hot water preparation in the hot water tank. The design also includes all the equip-ment needed for the proper functioning of the heating system. The exper-imental part compares flat panel and evacuated tube solar collectors.