This Master´s Thesis is focused on two areas of human resource management which are motivation and stabilization of employees and the link between them. The aim of my Master´s Thesis is to analyze the structure and quality of management of employee motivation and stabilization in a particular company through my own questionnaire survey and internal company data collection. The questionnaire survey is mainly focused on identifying motivation profiles of the company's employees and factors that have a positive impact on their job satisfaction. Thanks to analysis, the relevant conclusions and suggestions are made to strengthen or stabilize the company's strengths and reduce their weaknesses in area of motivation and stabilization management. The outputs of my Master´s Thesis can be used by the company management in order to improve the quality of human resources management and stabilize company's employees.

My theses scope is description of the Spanish relationship to European Union from the first integration tendencies after the WW II till the preferential agreement ratification in 1970. I will try to analyze part of the Spanish economic history within the context of west-European integration. This period precedes the political transformation of autocratic Spain to modern democracy. These democratic cabinets were able to aspire seriosusly to fully-fledged European Union membership. In my opinion it is not possible to view political transformation as a start-up for democratically elected governments to setup new relationships with EU but it is necessary to understand it as an important condition which is part of a long-term process of Spanish convergence to west-European integration. In my theses I primarily concentrate on the economic development but I mean that it is important to mention the political situation as well.

The aim of this diploma thesis is an optimal method of mixing of the digester with consideration to the uniform mixing of the whole volume, ensuring the quality process conditions for the anaerobic fermentation and the maximum yield and quality of the produced biogas. First chapters describe the basic design parameters, general calculations and the principles for design of individual types of mixers, supplemented by practical examples of mixing large capacity tanks. The work introduces the problem of sludge formation at the sewage treatment plant with an emphasis on sludge treatment and the processes which take place inside the fermenter. Various types of design of anaerobic sludge stabilization digester were introduced. Also ways of their operation, which are necessary for the quality of the fermentation, were presented. In the next chapters, various ways of mixing high-capacity digester tanks and experience from the operation of selected treatment plants were described. According to the theoretical research part of this thesis, several types of mixing equipment was designed for the experimental digestion tank built at the Institute of Process Engineering which is used for research work with mixers. Measurement of the selected pneumatic mixing method was performed on the experimental tank and the findings were evaluated.

Title: Effect of mobility exercises in offline and online environment on subjective perception of back pain Objectives: The main goal of this work was to determine whether the onset of daily mobility contributes to the reduction of individual's back pain perception. Within the work the results between the offline and online group was compared. Methods: The diploma thesis has the character of qualitative research, where case study of 20 probands was applied. Online input and output questionnaires were compiled to obtain data, which respondents filled in at the beginning and end of the intervention. Results: The research included 11 women and 9 men aged 21 - 44 years. Individuals have mostly sedentary jobs and some of them play recreational sports in their free time. At the end of the intervention, all individuals showed an improvement on the scale of the pain intensity, when the perceived back pain was alleviated or disappeared. The offline group performed better than the online group. Conclusion: The study confirmed that the inclusion of daily mobility contributes to the reduction of subjectively perceived back pain. It confirmed that exercising in offline lessons is more effective than in an online environment. Keywords: mobility, back pain, diaphragmatic breathing, torso stabilization, DNS

Standard analytical technics are used by the inspection of basic parameters of wine quality in the prezented graduation theses. Theoretical patr contains short description of viniculture history. Description of elementary bunch of grapes stage of processing and wine production from stum pressing untill bottling follow. There is short description of wine diseases and wine defekt, too. Attention paid to quality assessment. Experimental part is divided to 2 parts. The first part contains determination of four wines qualitative parameters value. Analysis are focused on final wine processing phase, e.g. wine filtration, wine clarification and stabilisation, wine bottling. Data evaluation of these four sort of wine get no basic parameters differences. Parameters value differences are small but fundamentaly conducive to wine enhance quality.

The shake that affects the video camera during taking of the footage degrades the level of the viewer experience. This article contains the design of the method that stabilizes the stored footage and fills in the gaps in the separate frames, so the picture resolution remains the same after the process.

Aim of the work was to study, design and verify methods of splicing photonic crystal fibers with standard single-mode and multi-mode fibers. The main goal was to make of the fusion splicer Fujikura FSM 100P splicing process. To create splicing process, various splicing methods were tested. Method of the moving position of the arc discharge from the center of splicing fibers and the method with increased gas pressure in the microstructure were mainly tested. Research revealed the incompatibility of splicing process of the different types of fiber splicers. The main results of the work are optimized methods of the splicing HC 1550-2 fiber and SMF 28 fiber.

This thesis covers the state assessment of the selected bank sections of dam reservoirs Vranov and Boskovice. Data used and processed in this thesis were acquired by visiting both sites several times in order to perform measurements and make photographic documentation. Futhermore, data on reservoirs' water levels from 2000-2011 provided by Povodí Moravy s.p. were used. In order to determine bank line regression, the above-mentioned data were processed using the Šlezingr's modification of the method of abrasion terminants determination. Results for dam reservoirs Vranov and Boskovice are then compared with results of dam reservoir Brno, which were produced by the author within the framework of his bachelor thesis using the same method. At the end of the thesis, the author presents several possible forms of stabilization and protection of disrupted banks of dam reservoirs, including their drawings.

The thesis presents design, development and realization of laser system with stabilized optical frequency which could become the basis of an etalon of wavelength for the telecommunication band of the near-infrared spectral region. Semiconductor DFB laser diode is used as a tunable source of radiation with narrow linewidth. Its optimum operation is ensured by especially designed current and temperature controller. The laser is prestabilized using FM spectroscopy technique to the passive Fabry-Perot cavity. This fast feed-back loop is able to improve spectral characteristics of the laser. The center frequency of the F.-P. cavity - the laser optical frequency is locked by a slow second feed-back loop to the absorption spectral line of acetylene 13C2H2 gas. The slow control loop is based on the third derivative spectroscopy technique. Relative stability at the level of 10E-12 was achieved.

The theoretical part describes the principles of the free-radical induced grafting and the influence of various parameters on the reactions course. The literature research summarizes the latest knowledge in the field of the reactive modification of polypropylene (PP), it is mainly focused on the PP modification using an unsaturated acid anhydrides. Theoretical part describes the various procedures and modification of technology in order to increase the grafting yield of maleation. The experimental part is determined by the influence of the stabilizers concentration, the peroxide structure, and the binary mixture of monomers on the grafting yield and the reaction course. In the first part, the critical stabilizers concentration was determined based on the experimentally obtained relationship between the grafting yield and the stabilizers concentration. A kinetic schema of grafting of MAH onto PP in the presence of stabilizers has been proposed and compared with the experimental results. The effect of the stabilizers on the extent of the undesirable b-scission was evaluated based on the melt flow rate (MFR) and the rheological curves of PP-g-MAH. In the second part, the effect of the peroxide structure and the concentration of reactants on the grafting yield of PP modification with MAH and itaconic anhydride (IAH) was observed. The initial grafting yield Rg has been experimentally determined and compared with a defined area of theoretical values of Rg. The extent of b-scission was significantly influenced by the structure and the concentration of peroxide, as shown by the results of MFR and the rheological curves of PP-g-MAH. The last part of the doctoral thesis is focused on the assessment of the combination of MAH and IAH as comonomers on the grafting yield. At first, the reference polymers were prepared using the solution polymerization of MAH, and IAH, and copolymerization of MAH with IAH. The reference polymers were analyzed by FTIR, DSC, WAXS to confirm the probable copolymerization of MAH and IAH. The dependence of the reaction enthalpy on the reaction time was observed using simulations of bulk polymerization of MAH, IAH and mixtures MAH and IAH "in situ" in isothermal calorimeter. PP was subsequently modified with a combination of MAH and IAH as comonomers in order to assess its effect on the grafting yield