L'objectif de cette thèse est de concevoir et d'appliquer de nouvelles méthodes de supervision capables d'appréhender les problèmes de sécurité affectant les données au sein des réseaux P2P structurés (DHT). Ceux-ci sont de deux types. D'une part les réseaux P2P sont utilisés pour diffuser des contenus illégaux dont l'activité est difficile à superviser. D'autre part, l'indexation des contenus légitimes peut être corrompue (attaque Sybil). Nous proposons tout d'abord une méthode de supervision des contenus basée sur l'insertion de sondes et le contrôle du mécanisme d'indexation du réseau. Celle-ci permet d'attirer l'ensemble des requêtes des pairs pour un contenu donné, puis de vérifier leur intention en générant des appâts très attractifs. Nous décrivons ainsi les faiblesses du réseau permettant la mise en œuvre de notre méthode en dépit des protections existantes. Nous présentons les fonctionnalités de notre architecture et en évaluons l'efficacité sur le réseau P2P KAD avant de présenter un déploiement réel ayant pour but l'étude des contenus pédophiles. Nous considérons ensuite la sécurité des données indexées dans une DHT. Nous supervisons le réseau KAD et montrons que celui-ci est victime d'une pollution particulièrement néfaste affectant 2/3 des fichiers mais aussi de nombreuses attaques ciblées affectant la sécurité des contenus stockés. Nous proposons un moyen de détecter efficacement cette dernière attaque en analysant la distribution des identifiants des pairs autour d'une référence ainsi qu'une contre-mesure permettant de protéger les pairs à un coût négligeable. Nous terminons par l'évaluation de la protection au sein de réseaux P2P réels.

<p>The use of marketing research panels are a more and more frequently used source of information for studies within many different branches. The purpose of this report is to investigate the demographic composition of panels and compare it with the population of Sweden, a possible change in behaviour of respondents, and if the source of recruitment is the cause of possible differences in study results. The study was commissioned by Norstats Linkoping office. Sources for the data material include Norstat’s recruitment process and their two main panels with different recruitment sources. To enable a deeper investigation of behaviour we also constructed a survey that was sent to 2,714 members of Norstat’s internet panels.</p><p>The statistical analysis includes contingency table analysis, multiple logistic regression, and Poisson regression. The results show that the demographic composition does not fully cover all the aspects of the Swedish population and some groups are less represented than others. The behaviour tends to differ between panel members that have responded to three or less surveys compared to members that have responded to twenty or more surveys. Source of recruitment does not seem to affect the results of studies, but it has some effect on the demographic composition of marketing research panels.</p> / <p>Användandet av paneler som källa vid undersökningar har den senaste tiden blivit en allt vanligare företeelse. Denna rapport har för avsikt att undersöka panelers demografiska sammansättning och överensstämmande med Sveriges befolkning, eventuell ändring av svarsbeteende samt huruvida rekryteringskällan ger upphov till kvalitetsskillnader hos medlemmar i en panel. Företaget Norstat har med sitt kontor i Linköping figurerat som uppdragsgivare till arbetet. Datamaterialet till studien har uppkommit från Norstats rekryteringsprocess samt från företagets två huvudpaneler med olika rekryteringskällor. För att djupare undersöka svarsbeteende konstruerade vi även en enkätundersökning som skickades ut till 2 714 medlemmar i Norstats internetpaneler.</p><p>Den statiska analysen innefattar χ2-test, multipel logistisk regression samt Poissonregression. Resultaten påvisade att den demografiska sammansättningen i panelen inte fullt ut speglade Sveriges befolkning samt att vissa grupper undertäcks i högre utsträckning än andra. Svarsbeteendet hos medlemmar i paneler har en tendens att ändras från det att medlemmen har svarat på en till tre undersökningar, till det att den har svarat på tjugo undersökningar eller fler. Rekryteringskällan till en panel verkar inte ge upphov till några större skillnader i svarsresultat, men däremot finns vissa skillnader i demografisk sammansättning.</p>

The conventional Verlet table neighbor list algorithm is improved to reduce the number of unnecessary inter-atomic distance calculations in molecular simulations involving large amount of atoms. Both of the serial and parallelized performance of molecular dynamics simulation are evaluated using the new algorithm and compared with those using the conventional Verlet table and cell-linked list algorithm. Results show that the new algorithm significantly improved the performance of molecular dynamics simulation compared with conventional neighbor list maintaining and utilizing algorithms in serial programs as well as parallelized programs. / Singapore-MIT Alliance (SMA)

Purpose: The purpose of this study is to measure and compare the corporate reputation of four staffing and recruitment companies, from the perspective of graduating students. Background: Corporate reputation is a concept that has interested researchers for the last four decades, and still the concept incorporates a number of varied definitions, contexts and measurement methods (Gotsi &amp; Wilson, 2001). Along with definition ambiguity comes also measurement concerns such as whether to aggregate or disaggregate several perspectives into one general index of a company’s reputation. Most researchers agree that corporate reputation is a suitable concept when describing the perceptions that stakeholders have of a company, and that it can only be ascribed to one company. This study takes the perspective to investigate one external stakeholder group of staffing and recruitment companies - graduating students. The group is of interest because it can possibly become an internal stakeholder group - employees. Method: For this study a quantitative method has been applied and an investigation has been made through a survey. Methodology about measuring corporate reputation is discussed, and lay ground for the empirical data collection. An altered version of the Harris-Fombrun Reputation Quotient (RQ) is used, in order to achieve better fit of the instrument and to attain higher reliability and validity. Conclusion: The purpose of this study has been fulfilled by measuring corporate reputation from the perspective of graduating students. empirical data from 125 students has been collected, and four corporate reputations of staffing and recruitment companies have been measured. The findings are not valid for generalisability but enough to give a good estimation of the population of interest. In addition, a disaggregated analysis of the RQ components has confirmed the findings. Using the methodology of the theoretically based Harris- Fombrun Reputation Quotient further validates the findings. Graduating students perceive Academic Work in the most positive way, in respect to the other companies. / Syfte: Syftet med denna studie är att mäta och jämföra anseendet av fyra bemannings- och rekryteringsföretag, utifrån avgångsstudenters perspektiv. Bakgrund: Företagets anseende är ett teoretiskt koncept som har intresserat forskare de senaste årtiondena och fortfarande råder delade meningar om definitioner, sammanhang och mätmetoder rörande konceptet (Gotsi &amp; Wilson, 2001). Med tvetydiga definitioner kommer även oklarhet gällande mätningsmetod, som till exempel om man ska summera flera intressenters åsikter till ett övergripande index eller inte. Forskare är eniga om att företagets anseende är ett passande koncept när man ska beskriva de åsikter intressenter har om ett företag. Denna studie undersöker en specifik grupp av bemannings- och rekryteringsföretags externa intressenter, nämligen avgångsstudenter. Denna grupp är intressant då de kan komma att bli interna intressenter, via anställning av ett företag. Metod: Denna studie har en kvantitativ inriktning och undersökningen har utförts med hjälp av en enkät. Metodiken i att mäta företags anseende genom att använda sig av league tabeller och pilotstudier diskuteras och ligger till grund för empiriinsamling. Användandet av en anpassad version av Harris-Fombrun Reputation Quotient (RQ) ger studien ökad validitet och reliabilitet. Slutsats: Syftet med denna studie har blivit uppnått genom att mäta företagens anseende ur avgångsstudenters perspektiv. Empirisk data från 125 studenter har samlats ihop och fyra bemannings- och rekryteringsföretags företagsanseenden har blivit uppmätta. Resultatet kan inte generaliseras för en större population, men den kan användas för att ge en bra indikation hur åsikterna för den specifika populationen är. Vidare har en uppdelad analys av komponenterna i RQ gjorts vilket har kunnat säkerställa resultaten i den totala RQ. Användandet av den teoretiskt grundade RQ ger ytterligare validitet åt resultaten. Avgångsstudenter har mest positiva åsikter om Academic Work i jämförelse med de andra undersökta företagen.

The subject of the thesis is systematic job evaluation for purposes of local wage determination for blue-collar jobs within the Swedish industry. The method is examined from a general wage-determination as well as from a gender equality perspective. The thesis is based on e.g. documents from the parties, on interviews with representatives of employers and unions at the central and local level, and on interviews with persons participating in job evaluation work in some companies. An analysis is made of one of the most common job evaluation systems, including the changes it has undergone since the 1950s. The use of a job evaluation system implies that a linkage is made between /certain/job demands and wages. It also means that this linkage is made in a systematic way. Systematics might, in its turn, imply consistency, rigidity and explicity. The thesis examines the significance of a linkage demands-wages and of consistency, rigidity and explicity for the parties' attitudes towards the method; as a purpose or as a means to achieve other goals. It demonstrates that the employers' problems to recruit labour and a desire for an increased wage differentiation has constituted a major reason for using the systems. The job evaluation system examined does not consider, or gives low weight to, certain demands which are common in female-dominated jobs. Various circumstances in the evaluation work process which provide it with scope for consideration are identified. This scope for consideration may disfavour female-dominated jobs. The thesis claims that the scope for consideration yet is less than in an unsystematic overall assessment of différencies in job demands between various jobs. A completed systematic job evaluation offers a basis for speaking of "work of equal value" in the sense of the Swedish Equal Opportunities Act, and forces the employer to explain possible différencies in the terms of employment when the points allotted are equal. It is unclear whether the court has to accept the application of the system made by the parties, or whether it could make its own evaluation with the same system. So far, no case concerning work of equal value has been settled in court. / <p>Diss. Umeå : Univ., 1991</p> / digitalisering@umu

The objective of the research was to design and test an SRAM system which can meet the performance criteria for Memory Based Computing (MBC). This form of computing consists of a Look-Up Table (LUT) which is basically memory array mapped with a function; the computations thereafter consist of essentially read operations. An MBC framework requires very fast and low power read operations. Moreover, the cells need to be read stable as major part of the computation is done by reading the LUTs mapped in the SRAM array. Design and measurement of a prototype MBC test-chip with SRAM system optimized for read-heavy applications is presented in this thesis. For this purpose, a prototype MBC system was designed and taped out. Essential study of the write-ability of the core LUT is also presented. The core memory array for function table mapping was characterized for leakage, write-ability and power saving associated with pulsed read mode.

Aquesta Tesi Doctoral se centra en el disseny d'un nou linealitzador de Predistorsió Digital (Digital Predistortion - DPD) capaç de compensar la dinàmica i els efectes no lineals introduïts pels Amplificadors de Potència (Power Amplifiers - PAs). Un dels trets més rellevants d'aquest nou predistorsionador digital i adaptatiu consisteix en ser deduïble a partir d'un model de PA anomenat Nonlinear Auto-Regressive Moving Average (NARMA). A més, la seva arquitectura multi-LUT (multi-Taula) permet la implementació en un dispositiu Field Programmable Gate Array (FPGA).La funció de predistorsió es realitza en banda base, per tant, és independent de la banda freqüencial on es durà a terme l'amplificació del senyal de RF, el que pot resultar útil si tenim en compte escenaris multibanda o reconfigurables. D'altra banda, el fet que aquest DPD tingui en compte els efectes de memòria introduïts pel PA, representa una clara millora de les prestacions aconseguides per un simple DPD sense memòria. En comparació amb d'altres DPDs basats en models més computacionalment complexos, com és el cas de les xarxes neuronals amb memòria (Time-Delayed Neural Networks - TDNN), la estructura recursiva del DPD proposat permet reduir el nombre de LUTs necessàries per compensar els efectes de memòria del PA. A més, la seva estructura multi-LUT permet l'escalabilitat, és a dir, activar or desactivar les LUTs que formen el DPD en funció de la dinàmica que presenti el PA.En una primera aproximació al disseny del DPD, és necessari identificar el model NARMA del PA. Un dels majors avantatges que presenta el model NARMA és la seva capacitat per trobar un compromís entre la fidelitat en l'estimació del PA i la complexitat computacional introduïda. Per reforçar aquest compromís, l' ús d'algoritmes heurístics de cerca, com són el Simulated Annealing o els Genetic Algorithms, s'utilitzen per trobar els retards que millor caracteritzen la memòria del PA i per tant, permeten la reducció del nombre de coeficients necessaris per caracteritzar-la. Tot i així, la naturalesa recursiva del model NARMA comporta que, de cara a garantir l'estabilitat final del DPD, cal dur a terme un estudi previ sobre l'estabilitat del model.Una vegada s'ha obtingut el model NARMA del PA i s'ha verificat l'estabilitat d'aquest, es procedeix a l'obtenció de la funció de predistorsió a través del mètode d'identificació predictiu. Aquest mètode es basa en la continua identificació del model NARMA del PA i posteriorment, a partir del model obtingut, es força al PA perquè es comporti de manera lineal. Per poder implementar la funció de predistorsió en la FPGA, cal primer expressar-la en forma de combinacions en paral·lel i cascada de les anomenades Cel·les Bàsiques de Predistorsió (BPCs), que són les unitats fonamentals que composen el DPD. Una BPC està formada per un multiplicador complex, un port RAM dual que actua com a LUT (taula de registres) i un calculador d'adreces. Les LUTs s'omplen tenint en compte una distribució uniforme dels continguts i l'indexat d'aquestes es duu a terme mitjançant el mòdul de l'envoltant del senyal. Finalment, l'adaptació del DPD consisteix en monitoritzar els senyals d'entrada i sortida del PA i anar duent a terme actualitzacions periòdiques del contingut de les LUTs que formen les BPCs. El procés d'adaptació del contingut de les LUTs es pot dur a terme en la mateixa FPGA encarregada de fer la funció de predistorsió, o de manera alternativa, pot ser duta a terme per un dispositiu extern (com per exemple un DSP - Digital Signal Processor) en una escala de temps més relaxada. Per validar l'exposició teòrica i provar el bon funcionalment del DPD proposat en aquesta Tesi, es proporcionen resultats tant de simulació com experimentals que reflecteixen els objectius assolits en la linealització del PA. A més, certes qüestions derivades de la implementació pràctica, tals com el consum de potència o la eficiència del PA, són també tractades amb detall. / This Ph.D. thesis addresses the design of a new Digital Predistortion (DPD) linearizer capable to compensate the unwanted nonlinear and dynamic behavior of power amplifiers (PAs). The distinctive characteristic of this new adaptive DPD is its deduction from a Nonlinear Auto Regressive Moving Average (NARMA) PA behavioral model and its particular multi look-up table (LUT) architecture that allows its implementation in a Field Programmable Gate Array (FPGA) device.The DPD linearizer presented in this thesis operates at baseband, thus becoming independent on the final RF frequency band and making it suitable for multiband or reconfigurable scenarios. Moreover, the proposed DPD takes into account PA memory effects compensation which representsan step forward in overcoming classical limitations of memoryless predistorters. Compared to more computational complex DPDs with dynamic compensation, such Time-Delayed Neural Networks (TDNN), this new DPD takes advantage of the recursive nature of the NARMA structure to relax the number of LUTs required to compensate memory effects in PAs. Furthermore, its parallel multi-LUT architecture is scalable, that is, permits enabling or disabling the contribution of specific LUTs depending on the dynamics presented by a particular PA.In a first approach, it is necessary to identify a NARMA PA behavioral model. The extraction of PA behavioral models for DPD linearization purposes is carried out by means of input and output complex envelope signal observations. One of the major advantages of the NARMA structure regards its capacity to deal with the existing trade-off between computational complexity and accuracy in PA behavioral modeling. To reinforce this compromise, heuristic search algorithms such the Simulated Annealing or Genetic Algorithms are utilized to find the best sparse delays that permit accurately reproducing the PA nonlinear dynamic behavior. However, due to the recursive nature of the NARMA model, an stability test becomes a previous requisite before advancing towards DPD linearization.Once the PA model is identified and its stability verified, the DPD function is extracted applying a predictive predistortion method. This identification method relies just on the PA NARMA model and consists in adaptively forcing the PA to behave as a linear device. Focusing in the DPD implementation, it is possible to map the predistortion function in a FPGA, but to fulfill this objective it is first necessary to express the predistortion function as a combined set of LUTs.In order to store the DPD function into a FPGA, it has to be stated in terms of parallel and cascade Basic Predistortion Cells (BPCs), which are the fundamental building blocks of the NARMA based DPD. A BPC is formed by a complex multiplier, a dual port RAM memory block acting as LUT and an address calculator. The LUT contents are filled following an uniform spacing procedure and its indexing is performed with the amplitude (modulus) of the signal's envelope.Finally, the DPD adaptation consists in monitoring the input-output data and performing frequent updates of the LUT contents that conform the BPCs. This adaptation process can be carried out in the same FPGA in charge of performing the DPD function, or alternatively can be performed by an external device (i.e. a DSP device) in a different time-scale than real-time operation.To support all the theoretical design and to prove the linearization performance achieved by this new DPD, simulation and experimental results are provided. Moreover, some issues derived from practical experimentation, such as power consumption and efficiency, are also reported and discussed within this thesis.

L'objectif de cette thèse est l'étude du comportement vibratoire de la table d'harmonie du piano dans le domaine des moyennes fréquences. Le premier chapitre est consacré à la table dont on présente le rôle, la structure et les matériaux. Les principaux résultats publiés sont regroupés sous forme d'une synthèse bibliographique. Dans un second chapitre, nous présentons une nouvelle méthode d'analyse modale dite haute résolution, permettant de s'affranchir des limitations naturelles de l'analyse de Fourier en termes de résolution spectrale. Celle-ci est validée par comparaison des analyses modales partielles expérimentales et théoriques de plaques minces en aluminium pour des recouvrements modaux compris entre 30% et 70%. Grâce à cette nouvelle méthode, l'identification modale, complète ou partielle, d'une table de piano droit est donnée dans les moyennes fréquences [300-2500 Hz]. L'obtention de l'amortissement moyen propre à la table en épicéa constitue un résultat nouveau dans ce domaine de fréquences. Par ailleurs, l'observation de la densité modale permet de préciser la validité du remplacement de la table raidie par une plaque homogène jusqu'à 1.1 kHz environ. Au-dessus de cette fréquence, la table se comporte comme une juxtaposition de guides d'ondes. L'observation des déformées modales pour ces fréquences, obtenues par un modèle en éléments finis, confirme la localisation des ondes entre les raidisseurs. Le phénomène de coïncidence acoustique se trouve alors profondément modifié par rapport à celui ayant cours pour les plaques minces. L'objectif du dernier chapitre est de proposer une description synthétique d'une table d'harmonie basée sur un petit nombre de descripteurs globaux : densité modale, amortissement moyen, espacement inter-raidisseurs. La validité d'un modèle de plaque homogène équivalente est étudiée et le remplacement de la structure par une plaque en matériau composite est envisagé. La description synthétique permet par exemple d'évaluer les variations de la mobilité au chevalet et du rayonnement dans l'aigu entraînée par une modification de structure (espacement inter-raidisseurs, épaisseur moyenne).

Current seismic design practice promotes inelastic response in order to reduce the design forces. By allowing the structure to yield while increasing the ductility of the structure, the global forces can be kept within the limited bounds dictated by the yield strength. However, during severe earthquakes, the structures undergo significant inelastic deformations leading to stiffness and strength degradation, increased interstory drifts, and damage with residual drift. The research presented in this thesis has three components that seek to address these challenges. To prevent the inelastic effects observed in yielding systems, a new concept “apparent weakening” is proposed and verified through shake table studies in this thesis. “Apparent weakening” is introduced in the structural system using a complementary “adaptive negative stiffness device” (NSD) that mimics "yielding” of the global system thus attracting it away from the main structural system. Unlike the concept of weakening and damping, where the main structural system strength is reduced, the new system does not alter the original structural system, but produces effects compatible with an early yielding. Response reduction using NSD is achieved in a two step sequence. First the NSD, which is capable of exhibiting nonlinear elastic stiffness, is developed based on the properties of the structure. This NSD is added to the structure resulting in reduction of the stiffness of the structure and NSD assembly or “apparent weakening”-thereby resulting in the reduction of the base shear of the assembly. Then a passive damper, designed for the assembly to reduce the displacements that are caused due to the “apparent weakening”, is added to the structure-thereby reducing the base shear, acceleration and displacement in a two step process. The primary focus of this thesis is to analyze and experimentally verify the response reduction attributes of NSD in (a) elastic structural systems (b) yielding systems and (3) multistory structures. Experimental studies on 1:3 scale three-story frame structure have confirmed that consistent reductions in displacements, accelerations and base shear can be achieved in an elastic structure and bilinear inelastic structure by adding the NSD and viscous fluid damper. It has also been demonstrated that the stiffening in NSD will prevent the structure from collapsing. Analogous to the inelastic design, the acceleration and base shear and deformation of the structure and NSD assembly can be reduced by more than 20% for moderate ground motions and the collapse of structure can be prevented for severe ground motions. Simulation studies have been carried on an inelastic multistoried shear building to demonstrate the effectiveness of placing NSDs and dampers at multiple locations along the height of the building; referred to as “distributed isolation”. The results reported in this study have demonstrated that by placing a NSD in a particular story the superstructure above that story can be isolated from the effects of ground motion. Since the NSDs in the bottom floors will undergo large deformations, a generalized scheme to incorporate NSDs with different force deformation behavior in each storey is proposed. The properties of NSD are varied to minimize the localized inter-story deformation and distribute it evenly along the height of the building. Additionally, two semi-active approaches have also been proposed to improve the performance of NSD in yielding structures and also adapt to varying structure properties in real time. The second component of this thesis deals with development of a novel device to control the response of structural system using adaptive length pendulum smart tuned mass damper (ALP-STMD). A mechanism to achieve the variable pendulum length is developed using shape memory alloy wire actuator. ALP-STMD acts as a vibration absorber and since the length is tuned to match the instantaneous frequency, using a STFT algorithm, all the vibrations pertaining to the dominant frequency are absorbed. ALP-STMD is capable of absorbing all the energy pertaining to the tuned-frequency of the system; the performance is experimentally verified for forced vibration (stationary and non-stationary) and free vibration. The third component of this thesis covers the development of an adaptive control algorithm to compensate hysteresis in hysteretic systems. Hysteretic system with variable stiffness hysteresis is represented as a quasi-linear parameter varying (LPV) system and a gain scheduled controller is designed for the quasi-LPV system using linear matrix inequalities approach. Designed controller is scheduled based on two parameters: linear time-varying stiffness (slow varying parameter) and the stiffness of friction hysteresis (fast varying parameter). The effectiveness of the proposed controller is demonstrated through numerical studies by comparing the proposed controller with fixed robust H∞ controller. Superior tracking performance of the LPV-GS over the robust H∞ controller in different displacement ranges and various stiffness switching cases is clearly evident from the results presented in this thesis. The LPV-GS controller is capable of adapting to the parameter changes and is effective over the entire range of parameter variations.

Health problems of the human beings in a society are one of the main components of the social security systems due to the dimension of the financial burden it might bring on individuals, employers, insurance companies and governments. Morbidity measures, such as incidence and prevalence of a specific disease in a certain population enable researchers to estimate for individuals the probability of being diagnosed or being prone to the diseases. This information is usually not tractable because of the non-availability of the convenient data or recordings for many countries as well as Turkey. Even if it is available, it is commonly limited with largely varying characteristics about the type and coverage of the diseases. In this regard, the pattern that a population follows for an acute disease may not be the same for chronic diseases. Having those indicators determined for a group of insureds will enable underwriters to have more profitable and economical premium calculation and precision on required reserve estimation. v Based on their characteristics such as acute or chronic behaviour, the gender, and the location of residency of people, the diseases show different behaviour on their occurrences. From the insurer