Global ETD Search

51	Synthesis, adsorption and structural properties of carbons with uniform and ordered mesopores Gierszal, Kamil Piotr 09 April 2008 (has links) No description available. Chemistry mesoporous carbons inverse replication hard templating OMC CMK-3 CMK-5 mesoporous silicas OMS SBA-15 MCM-48 KIT-6 colloids colloidal crystal nanomaterials gas adsorption
52	Template directed synthesis of porphyrin nanorings O'Sullivan, Melanie Claire January 2011 (has links) This thesis describes supramolecular approaches to porphyrin nanorings. Cyclic porphyrin arrays resemble natural light harvesting systems, and it is of interest to probe the photophysical effects of bending the porphyrin aromatic π-system. A general overview of the synthesis and photophysical properties of porphyrins and their arrays is carried out in Chapter 1. The electronic structure of porphyrins is examined, and how conformational effects in oligomers, such as inter-porphyrin torsional angle and backbone bending influence the π-conjugation pathway. The structures of light harvesting complexes are discussed. Chapter 2 describes the design and synthesis of a complementary 12-armed template designed to coordinate linear porphyrin oligomers in the correct conformation for cyclisation to give a cyclic porphyrin dodecamer. Chapter 3 demonstrates two approaches to a cyclic porphyrin dodecamer ring. Firstly, a classical templating approach using the 12-armed template is described. The limitations of this approach in the quest for larger nanorings are discussed. Vernier templating, which utilises a mismatch in the number of binding sites between a ligand and its receptor is introduced as a general strategy to the synthesis of large nanorings. This is demonstrated by the synthesis of cyclic dodecamer from a linear porphyrin tetramer and a hexadentate template via a figure-of-eight intermediate. The general utility of the Vernier method to large nanorings is explored in Chapter 4 with steps towards the synthesis of a cyclic tetracosamer, consisting of 24 porphyrin subunits. In preliminary experiments, an improved route to the cyclic porphyrin octamer is described. Finally, the photophysical properties of the nanoring series are explored in Chapter 5 as a function of size and conformation. Femtosecond photoluminescence spectroscopy shows that even in cyclic dodecamer, exciton delocalisation over the entire porphyrin backbone occurs on a sub-picosecond timescale, and parallels are drawn with the dynamics of natural light harvesting complexes. 547.6
53	Influence de l'architecture macroporeuse en phosphate de calcium sur le comportement cellulaire in vitro / The influence of a calcium phosphate macroporous architecture on cellular behavior in vitro Chamary, Shaan 20 February 2018 (has links) Les phosphates de calcium tels que le β-TCP sont utilisés depuis des décennies comme substitut osseux synthétique. Leurs bonnes propriétés chimiques et leur comportement analogue au tissu osseux in vivo et in vitro peuvent être améliorés par la technique de mise en forme employée. Il est aujourd'hui largement admis qu'une architecture poreuse optimisée aura un impact positif sur la bioactivité du matériau. Cette étude vise à étudier les liens existant entre une structure macroporeuse en β-TCP et la prolifération et différenciation cellulaire. Le β-TCP est fabriqué par précipitation aqueuse. Les paramètres de synthèse sont optimisés afin d'avoir un produit répondant aux normes ISO 13175 et 13779. Trois méthodes de mise en forme ont été choisies pour leur aptitude à générer une macroporosité originale. L'imprégnation d'une structure polymérique par une suspension génère un réseau de pores sphériques (PS), la stéréolithographie génère des pores cubiques interconnectés (3D) et la congélation orientée produit un réseau de pores tubulaires ellipsoïdaux parallèles au sens de la congélation (CO). Deux tendances émergent des cultures de cellules souches mésenchymateuses humaines: PS et 3D favorisent la prolifération alors que CO favorise la pénétration cellulaire et l'activité de la phosphatase alcaline. Cette dernière est favorisée par le β-TCP et cette aptitude est améliorée par la congélation orientée. Cela pourrait s'expliquer par l'état d'avancement de la différenciation cellulaire: les cellules sur les échantillons CO semblent être à un stade de différenciation plus avancé. Des essais complémentaires sur l'expression de gènes clés sont en cours pour vérifier cette hypothèse. / Calcium phosphates such as β-TCP have been used for decades as synthetic bone substitutes. Its good chemical properties and its similar behavior to that of the bone in vivo and in vitro can be enhanced by the chosen shaping method. It is nowadays largely accepted that an optimized porous architecture will have a positive impact on the material's bioactivity. This study aims at studying the links between a porous architecture and cell proliferation and differentiation. β-TCP was manufactured by aqueous precipitation. Synthesis parameters were optimized in order to get a product complying with ISO 13779 and 13175 requirements. Three shaping methods were chosen for their ability to generate original structures. The impregnation of a polymeric scaffold yields a network of interconnected spherical pores (PS), stereolithography yields a network of interconnected cubical pores (3D) and ice templating yields a network of parallel ellipsoidal channel-like structure (CO). Two different trends emerged from the human mesenchymal stem cell culture: PS and 3D favored cell proliferation whereas CO promoted cell penetration and alkaline phosphatase activity. The latter is stimulated by β-TCP and this ability is enhanced by freeze casting. This could be explained by the state of cell differentiation: cells on CO samples seem to be far more differentiated than the other ones. However the study of key genes expression is needed to confirm this hypothesis. Β-Tcp Macroporeux Congélation orientée Cellule souche mésenchymateuse humaine Différenciation cellulaire In vitro Calcium phosphate Β-Tcp Stereolithography Ice templating Human mesenchymal stem cell Cell differentiation In vitro
54	Shaping Macroporous Ceramics : templated synthesis, X-ray tomography and permeability Andersson, Linnéa January 2011 (has links) Macroporous ceramic materials have found widespread technological application ranging from particulate filters in diesel engines, tissue engineering scaffolds, and as support materials in carbon capture processes. This thesis demonstrates how the pore space of macroporous alumina can be manipulated, analysed in three-dimensions (3D) using visualisation techniques, and functionalised with a CO2-adsorbing material. A novel method was developed to produce macroporous alumina materials: by combining sacrificial templating with thermally expandable polymeric microspheres and gel-casting of an alumina suspension. This method offers a versatile production of macroporous ceramics in which the level of porosity and the pore size distribution can easily be altered by varying the amount and type of spheres. The permeability to fluid flow could be regulated by controlling the connectivity of the pore space and the size of the smallest constrictions between the pores. Sacrificial templating with particle-coated expandable spheres significantly increased the fraction of isolated pore clusters and reduced both the sizes and the numbers of connections between neighbouring pores, compared to templating with un-coated spheres. The macroporous alumina materials were characterised with X-ray micro-computed tomography (μ-CT). The 3D data-sets obtained by X-ray μ-CT were used to calculate the spatial variation in porosity, the throat and pore size distributions and to calculate the permeability to fluid flow. The throat and pore size distributions were also able to be accurately quantified in only one extrusion and intrusion cycle with water-based porosimetry; a relatively novel and simple characterisation technique. The pore walls of the macroporous alumina materials were also coated with zeolite films by a colloidal processing technique. The CO2-uptake of the coated alumina materials and of hierarchically porous monoliths of zeolites was evaluated and compared. / As the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 2: Submitted. Paper 4: Accepted. Paper 5: Manuscript. Paper 6: Submitted. Alumina ceramic CO2 capture colloidal processing expandable microspheres gel casting layer-by-layer macroporosity near-net shape non-destructive evaluation permeability porosity sacrificial templating X-ray computed tomography Chemistry Kemi
55	Synthesis and Characterization of Nanostructured Electrodes for Solid State Ionic Devices Zhang, Yuelan 20 November 2006 (has links) The demands for advanced power sources with high energy efficiency, minimum environmental impact, and low cost have been the impetus for the development of a new generation of batteries and fuel cells. One of the key challenges in this effort is to develop and fabricate effective electrodes with desirable composition, microstructure and performance. This work focused on the design, fabrication, and characterization of nanostructured electrodes in an effort to minimize electrode polarization losses. Solid-state diffusion often limits the utilization and rate capability of electrode materials in a lithium-ion battery, especially at high charge/discharge rates. When the fluxes of Li+ insertion or extraction exceed the diffusion-limited rate of Li+ transport within the bulk phase of an electrode, concentration polarization occurs. Further, large volume changes associated with Li+ insertion or extraction could induce stresses in bulk electrodes, potentially leading to mechanical failure. Interconnected porous materials with high surface-to-volume ratio were designed to suppress the stress and promote mass transport. In this work, electrodes with these unique architectures for lithium ion batteries have been fabricated to improve the cycleability, rate capability and capacity retention. Cathodic interfacial polarization represents the predominant voltage loss in a low-temperature SOFC. For the first time, regular, homogeneous and bimodal porous MIEC electrodes were successfully fabricated using breath figure templating, which is self-assembly of the water droplets in polymer solution. The homogeneous macropores promoted rapid mass transport by decreasing the tortuosity. And mesoporous microstructure provided more surface areas for gas adsorption and more TPBs for the electrochemical reactions. Moreover, composite electrodes were developed with a modified sol-gel process for honeycomb SOFCs. The sol gel derived cathodes with fine grain size and large specific surface area, showed much lower interfacial polarization resistances than those prepared by other existing processing methods. Nanopetals of cerium hydroxycarbonate have been synthesized via a controlled hydrothermal process in a mixed water-ethanol medium. The formation of the cerium compound depends strongly on the composition of the precursors, and is attributed to the favored ethanol oxidation by Ce(IV) ions over Ce(IV) hydrolysis process. Raman studies showed that microflower CeO2 preferentially stabilizes O2 as a peroxide species on its surface for CO oxidation. Lithium ion batteries Interconnected porous electrode Catalysts Fuel cells Self-assembly templating Thin film electrode Nanostructures Ionic crystals Solid state electronics Nanostructured materials Synthesis Lithium cells
56	Self-assembly of anisotropic particles driven by ice growth : Mechanisms, applications and bioinspiration / Auto-assemblage de particules anisotropes réalisé par croissance de cristaux de glace : Mécanismes, applications et bioinspiration Bouville, Florian 11 December 2013 (has links) Les phénomènes d'auto-assemblage sont au premier plan de la recherche en sciences des matériaux car ils comblent le vide laissé entre les procédés d'assemblage à l'échelle macroscopique et nanoscopique. L'auto-assemblage est basé sur l'organisation spontanée de composants individuels en motifs et structures. Contrôler l’agencement de la matière peut accroître les propriétés de matériaux en introduisant une certaine anisotropie. Cet agencement, comme de nombreux matériaux naturels le prouvent, peut même sous certaines conditions faire émerger de nouvelles caractéristiques. Au cours de ces trois années, nous avons utilisé l’ « ice templating » (texturation à la glace) pour déclencher l’alignement de plaquettes de dimensions microniques, le but final étant de répliquer la microstructure de la nacre. Cette technique induit la ségrégation des constituants d’une suspension à l’échelle du micron tout en obtenant des échantillons de quelques centimètres cubes. Ce procédé a permis la création de matériaux inorganique avec une microstructure semblable à la nacre, en additionnant trois niveaux de contrôles successifs : l’alignement local des plaquettes, l’alignement à longue distance des cristaux de glaces et enfin le contrôle de l’interface entre ces-mêmes plaquettes. L’utilisation d’une modélisation par éléments discrets nous a permis d’étudier la dynamique de l’auto-assemblage des particules anisotropes. Ce modèle, parce qu’il tient compte de la dynamique du procédé, nous a révélé comment l’organisation de ces particules se produit. La tomographie par rayon X a permis de visualiser les structures finales des échantillons et d’attester de la pertinence du modèle. L’alignement local des plaquettes dans les parois générées par la solidification de la glace peuvent accroître les propriétés fonctionnelles et structurales de composites. Dans ce cadres deux applications ont été étudiées : la conduction thermique dans des composites nitrure de bore hexagonal / silicone et les propriétés mécaniques d’alumine macroporeuses. Une adaptation du procédé a permis d’obtenir l’alignement à longue distance (quelques centimètres) des cristaux de glaces. Différents outils ont été développés pour caractériser la réponse fonctionnelle de ce type de composite en fonction de leurs architectures aux deux échelles considérées (celles des macropores et parois). Enfin, après la mise en place de ces deux niveaux de contrôle sur la structure, l’addition d’une phase vitreuse inorganique et de nanoparticules aux joints de grains des plaquettes a introduit, de façon similaire à la nacre, des interfaces pouvant dévier et arrêter la propagation de fissures. / Self-assembly phenomena are of prime interest in materials science, because they fill the gap between assembly of macrostructure and processing of nanomaterials. Self-assembly is based on the spontaneous organization of individual small constituents into patterns and structures. Controlling the spatial arrangement can possibly improve materials properties by maximizing its response in a given direction. Furthermore, particular types of spatial arrangement, such as found in natural structures, can even induce new properties. During the past three years, we have used ice templating process to trigger the assembly of platelet-shaped particles to replicate the hierarchical structure of nacre. Control over this technique allowed structural customization at different length-scales: local orientation of the platelets, ice crystal long range order, and the control if the interfaces between the platelets. This hierarchical process has set the ground for the creation of a new fully mineral nacre-like alumina. The local platelet self-assembly triggered by ice growth was investigated by Discrete Element Modelling which provided new insight into the dynamic phenomenon responsible for the particles alignment. Synchrotron X-ray tomography was used to validated the model results. The different architecture observed in the final samples are not the result of a percolation threshold, as one could expect, but is instead a consequence of the delicate balance between pushing and engulfment at the solidification front. The local alignment of platelets can be beneficial for the functional and structural characteristics of composites and relevant aspects for two potential applications were investigated: the thermal properties of the hexagonal boron nitride/silicon rubber composites and the mechanical properties of macroporous alumina. Further adaptation of the process allowed for long range ordering of the ice crystals (up to the centimeter scale). Different tools have also been developed in order to characterize the response of composites as a function of the architecture at the level of the macropores and particle organisation. Once those two levels of alignment were achieved, the addition of a glassy phase and nanoparticles to the grain boundaries of the platelets introduces, just like in nacre, interfaces capable of deflect and even stopping crack propagation. Matériau céramique Auto Solidification Bioinspiration Nacre Renforcement mécanique Texturation à la glace Plaquettes du sang Structure cristalline Tomographie par rayon X Modélisation Méthode des éléments discrets Ceramics Solidification Self assembly Bioinspiration Nacre Mechanical reinforcement Ice-Templating Platelet Crystal structure X-Ray tomography Modelization Discrete element method 620.143 072
57	Investigations into High Surface Area and Hierarchical Phase Segregated Network Structures Viggiano, Rocco P., III January 2015 (has links) No description available. Aerospace Materials Automotive Materials Chemistry Engineering Experiments Inorganic Chemistry Materials Science Organic Chemistry Polymer Chemistry Polymers
58	Dynamic chemistry : nucleobase recognition by synthetic receptors and cis-trans acylhydrazone isomerism / Chimie dynamique : reconnaissance de nucléobases par des récepteurs synthétiques et isomérie cis-trans d'hydrazones acylées Marshall, Tracey 27 January 2012 (has links) Chimie dynamique: reconnaissance de nucléobases par des récepteurs synthétiques et isomérie cis-trans d'hydrazones acylées.Ce travail traite du développement des systèmes moléculaires qui peuvent s'adapter à l'addition de substances qui agissent comme un gabarit. Cette approche permet d'isoler une espèce majeure à partir d'un mélange de composés par le biais de la chimie combinatoire dynamique (CCD). La première partie de ma thèse de doctorat inclus l'utilisation d'un ADN simple brin (ADNsb) comme un gabarit pour le transfert d'information par auto-assemblage de récepteurs sans avoir besoin d'enzyme. De nouveaux récepteurs de l'adénine et de la guanine (pinces A et G) solubles dans l'eau ont été conçues dans ce but. Une approche utilisant la résonance magnétique nucléaire (RMN) a été utilisée pour déterminer l'affinité de liaison comme preuve d'une reconnaissance spécifique et efficace. Une évaluation dans l'eau par dichroïsme circulaire (CD) et mesure de la température de fusion par UV (Tm) a été réalisée. Cela a permis de tester respectivement la capacité d'auto-assemblage entre les pinces et un modèle ADNsb, et la force du processus de coopérativité. La deuxième partie de ce travail est axée sur le tri spontanné de motifs pyridine acylhydrazone et sur les configurations intéressantes qu'ils adoptent. Nous avons étudié la synthèse d'une série de motifs pyridine acylhydrazone: dimère, trimères et pentamères. Des études RMN ont permis d'évaluer les changements dans l'équilibre configurationnel cis / trans de ces systèmes dynamiques. Les études ont montré que l'équilibre attendu est biaise la cis acylhydrazone pyridine isomère a été observée par diffraction des rayons X. / Dynamic chemistry: nucleobase recognition by synthetic receptors and cis-trans acylhydrazone isomerism. This work deals with the development of molecular systems which can adapt upon the addition of substances that act as templates. This approach enables one major species to be identified from a mixture of compounds through the use of dynamic combinatorial chemistry (DCC). The first part of my PhD included the use of a single stranded DNA (ssDNA) as a template for information transfer via the self-assembly of receptors without the need for enzymes. New water soluble adenine and guanine receptors (A and G clamps) were designed and synthesised for this purpose. Nuclear magnetic resonance (NMR) titration studies were carried out to calculate the binding affinity and as a proof of specific and efficient recognition. An assessment in water via circular dichroism (CD) and UV temperature melting (Tm) studies was carried out. This tested the ability for self-assembly between the clamps and a ssDNA template and the strength of the cooperative process respectively. The second part of my PhD focused on the self-sorting of acylhydrazone pyridine motifs and the interesting configurations they adopt. The feasibility to synthesise these acylhydrazone pyridine motifs (dimer, trimers and pentamers) was investigated. X-ray and NMR studies showed that the equilibrium was found to be biased in an unusual way, and the cis acylhydrazone pyridine isomer was observed. Chimie dynamique Ccd Auto-assemblage Templates Transfert d'informations Récepteurs synthétiques Solubles dans l'eau Reconnaissance nucléobase Acide nucléique Adn Simple brin Acylhydrazone pyridine Dimère Trimère Pentamère Isomérie cis trans Rmn Cd Uv Études de température de fusion Dynamic chemistry Dcc Self-assembly Templating Information transfer Synthetic receptors Water soluble Nucleobase recognition Nucleic acid Dna SsDNA Acylhydrazone pyridine Dimer Trimer Pentamer Cis trans isomerism Nmr Cd Uv Melting temperature studies
59	Databáze akustických nahrávek / Database of acoustic records Terz, Marek January 2008 (has links) The databsae of accoustical recordings is a web-based application, which is accessible with an usual web browser. There were used technologies, that are ussually used in web applications. This ensures, that the application is open for using by wide range of users. The application enables uploading WAWE files to the server and allows the user to add various description of the recordings. The application allows also comparing the quality of recordings, which were processed with some method for highlighting the accoustical signal from noise. This function is established by listening tests, which are open for every user, who wants to join the tests.
60	Cobalt porphyrins on coinage metal surfaces - adsorption and template properties / Porphyrine de cobalt dans surfaces métalliques - propriété d’adsorption et de template Houwaart, Torsten 08 July 2014 (has links) Cette thèse est une étude théorique sur la interface de porphyrine de cobalt avec des surfaces métalliques avec le code VASP DFT. Le cadre DFT nécessaire a été introduit dans le chapitre 1. La structure de la jBardeen, une programme ecrit en Java, pour la simulation de la STM est expliqué dans le chapitre 2 et le code source est jointe en annexe. Une étude de l'adsorption de CoTPP sur les surfaces métalliques a été entrepris dans le chapitre 3. Différents paramètres de calcul ont été évalués: Le site d'adsorption et de la géométrie à la fois la molécule et la surface ont été étudiés par rapport à la xc-fonctionnel et correction de la dispersion utilisée. Une adsorption site le plus stable est identifié. Par conséquent, ce site plus stable a été étudiée pour sa structure électronique. Calculés images STM avec le code jBardeen ont été comparés avec une experimentation de CoTPP Cu sur une surface (111) avec une couverture sous monocouche. Dans le chapitre 4, un adatome Fe a été présenté à la CoTPP sur Ag système (111). Trois sites de liaison symétrique différentes pour l'atome Fe ont été identifiés sur le macrocycle, marqué les , bi-, brd- et bru-positions. Un moment magnétique pouvait être attestée qui a été principalement situé sur l'atome Fe. Voies possibles entre les quatre, symétriquement équivalentes, sites bi- ont été étudiées avec des méthodes différentes. Simples calculs dans le vacuum et calculs de la “Nudged Elastic Band” (NEB) de l'ensemble du système a révélé une hauteur de barrière légèrement au-dessus de 0,2 eV allant de position bi à la posititon brd. Une analyse de vibration a montré que la commutation de l'atome Fe est susceptible, lorsqu'il est perturbé hors d'équilibre dans les positions brd et bru. / This thesis is a theoretical study on the cobalt porphyrin - coinage metal surface interface with the DFT code VASP. The necessary DFT framework has been introduced in chapter 1. The structure of the Java program jBardeen for STM simulation is explained in chapter 2 and the source code is attached as Appendix. A study of the adsorption of CoTPP on coinage metal surfaces has been undertaken in chapter 3. Different parameters of the calculation have been evaluated: the adsorption site and the geometry of both the molecule and surface have been investigated with respect to the xc-functional and dispersion correction used. A most stable adsorption site -bridge down- is identified. Consequently, this most stable site was investigated for its electronic structure. Calculated STM images with the jBardeen code were compared with an experiment of CoTPP on a Cu(111) surface with sub monolayer coverage. In chapter 4 an Fe adatom was introduced to the CoTPP on Ag(111) system. Three symmetrically different binding sites for the Fe atom were identified on the macrocycle, labelled the bi-, brd- and bru-positions for bisector, bridge down and bridge up respectively. A magnetic moment could be evidenced which was mainly located on the Fe atom. Possible pathways between the four symmetrically equivalent bisector sites were investigated with different methods. Single point calculations in vacuum and Nudged Elastic Band (NEB) of the whole system revealed a barrier height of slightly above 0.2 eV going from bi- to the brd-position. A vibrational analysis showed that switching of the Fe atom is likely, when perturbed out of equilibrium in the brd- and bru- positions. Porphyrine de Cobalt CoTPP Pophyrine Microscope à effet tunnel STM DFT Surfaces métalliques Adsorption Templates Étude théorique Interface métal molécule VASP JBardeen Programme Java Site d'adsorption Géométrie d'adsorption Correction de dispersion Xc-fonctionnel D2 Grimmes potentiel Grimmes D2 Structure électronique Cu(111) Ag(111) Fe adatome Site de liaison Moment magnétique Couplage magnétique Dynamique de commutation NEB Analyse de vibration Analyse de charge Bader PDOS Cobalt-Tetra-Phenyl-Porphyrin CoTPP Porphyrins Scanning Tunneling Microscopy STM Density Functional Theory DFT Coinage metal surfaces Adsorption Templating Theoretical study Molecule metal interface VASP JBardeen Java program Adsorption site Adsorption geometry Xc-functional Dispersion correction D2 Grimmes potential Grimmes D2 Electronic structure Cu(111) Ag(111) Fe adatom Binding site Magnetic moment Magnetic coupling Switching dynamics NEB Nudged Elastic Band Vibrational analysis Bader charge analysis PDOS Projected Density of States

Search results