Aerosols affect the global radiation budget which plays an important role in determining the state of the Earth's climate. The heterogeneous distribution of aerosols and the variety in their properties results in high uncertainty in the understanding of aerosols. Aerosols affect the radiation by scattering and absorption (direct effect) or by modifying the cloud properties which in turn affects the radiation (indirect effect). The current work focuses only on the direct radiative effect of aerosols. The change in the top-of-atmosphere (TOA) reflected flux due to the perturbation of aerosols and their properties is called direct aerosol radiative forcing (ARFTOA). Estimation of ARFTOA using aerosol properties is done by solving the radiative transfer equation using a radiative transfer model. However, before using the radiative transfer model, it has to be validated with observations for consistency. This is done to check if the model is able to replicate values close to actual observations. The current work uses the Santa Barbara DISORT Atmospheric Radiative Transfer (SBDART) model. The output radiative fluxes from SBDART are validated by comparing with the Clouds and the Earth's Radiant Energy System (CERES) satellite data. Under clear-skies SBDART agreed with observed fluxes at TOA well within the error limits of satellite observations. In the shortwave solar spectrum (0.25-4 µm) radiation is affected by change in various aerosol properties and also by water vapour and other gas molecules. To study the effect of each of these molecules separately on the aerosol forcing at TOA, SBDART is used. ARFTOA is found to depend on the aerosol loading (aerosol optical depth – AOD), aerosol type (SSA) and the angular distribution of scattered radiation (asymmetry parameter). The role of water vapour relative to the aerosol layer height was also investigated and for different aerosol types and aerosol layer heights, it was found that water vapour can induce a change of ~4 Wm-2 in TOA flux. The relative importance of aerosol scattering versus absorption is evaluated through a parameter called single scattering albedo (SSA) which can be estimated from satellites. SSA defined as the ratio of scattering efficiency to total extinction efficiency, depends on the aerosol composition and wavelength. Aerosols with SSA close to 1 (sea-salt, sulphates) scatter the radiation and cool the atmosphere. Aerosols with SSA < 0.9 (black carbon, dust) absorb radiation and warm the atmosphere. Over high reflective surfaces a small change in SSA can change forcing from negative (cooling) to positive (warming). This makes SSA one of the most important and uncertain aerosol parameters. Currently, the SSA retrievals from the Ozone Monitoring Instrument (OMI) are highly sensitive to sub-pixel cloud contamination and change in aerosol height. Using the sensitivity of OMI to aerosol absorption and the superior cloud masking technique and accurate AOD retrieval of Moderate Resolution Imaging Spectroradiometer (MODIS), an algorithm to retrieve SSA (OMI-MODIS) was developed. The algorithm was performed over global oceans (60S-60N) from 2008-2012. The difference in SSA estimated by OMI-MODIS and that of OMI depended on the aerosol type and aerosol layer height. Aerosol layer height plays an important role in the UV spectrum due to the dominance of Rayleigh scattering. This was verified using SBDART which otherwise would not have been possible using just satellite observations. Both the algorithms were validated with cruise measurements over Arabian Sea and Bay of Bengal. It was seen that when absorbing aerosols (low SSA values) were present closer to the surface, OMI overestimated the value of SSA. On the other hand OMI-MODIS algorithm, which made no assumption on the aerosol type or height, was better constrained than OMI and hence was closer to the cruise measurement The presence of clouds results in a more complex interaction between aerosols and radiation. Aerosols present above clouds are responsible to most of the direct radiative effect in cloudy regions. The ARFTOA depends not only on the aerosol properties but also on the relative position of aerosols with clouds. When absorbing aerosols are present above clouds, the ARFTOA is highly influenced by the albedo of the underlying surface. Recent studies, over regions influenced by biomass burning aerosol, have shown that it is possible to define a ‘critical cloud fraction’ (CCF) at which the aerosol direct radiative forcing switch from a cooling to a warming effect. Similar analysis was done over BoB (6.5-21.5N; 82.5-97.5E) for the years 2008-2011. Aerosol properties were taken from satellite observations. Satellites cannot provide for aerosols present at different heights and hence SBDART was used to calculate the forcing due to aerosols present only above clouds. Unlike previous studies which reported a single value of CCF, over BoB it was found that CCF varied from 0.28 to 0.13 from post-monsoon to winter as a result of shift from less absorbing to moderately absorbing aerosol. This implies that in winter, the absorbing aerosols present above clouds cause warming of the atmosphere even at low cloud fractions leading to lower CCF. The use of multiple satellites in improving the retrieval of SSA has been presented in this thesis. The effect of aerosols present above clouds on the radiative forcing at TOA is shown to be different between Bay of Bengal and Atlantic Ocean. This was due to the change in SSA of aerosols during different seasons. The effect of aerosol height, aerosol type and water vapour on the TOA flux estimation is also studied using a radiative transfer model.

The thesis concerns of the possibility by using alternative decentralized sources of energy. The first chapter describes current energy situation in the Czech Republic and consideration of future electrical energy consumption and the coverage by the renewable sources. Another part of this chapter describes each types of renewable energy with their advantages and disadvantages related to the Czech Republic. In the second chapter are introduced inputs which are appropriate for the plan of energetic system. The following theoretical chapter deals with each types of alternative energy sources using renewable source including the possibility of the installation and plan for the building. These alternative sources are sorted out by the way of using renewable sources of energy. The theoretical-practical fourth chapter concerns of the heating by the heat pump. For the detailed description was chosen the heat pump which is currently denote as appropriate alternative source of heat in household. With appropriate plan, which the thesis deals with, is this alternative source considered as proper investment. In the last chapter was assembled programme for creating models of energetic flux and calculation for the plan of heating by the heating pump air/water. This model is taken for concrete buildings related to exact outdoor temperature from previous years in concrete locality. In the end was realized validation of the software with the real measurement in concrete building.

Die Bundesregierung plant im Rahmen der Energiewende den Anteil von erneuerbaren Energien an der Stromerzeugung in Deutschland von heute rund 25% auf 80% bis zum Jahr 2050 auszubauen. Damit stehen auch dem Stromsektor in Sachsen grundlegende Veränderungen bevor. Derzeit leistet im Freistaat Sachsen die Braunkohle den größten Beitrag zur Elektrizitätsbereitstellung. Mit dem zunehmenden Ausbau an erneuerbaren Energien steigt der Anteil dargebotsabhängiger Energieträger. Daraus resultieren technische und wirtschaftliche Herausforderungen für das bestehende Energiesystem, wie z.B. die künftige Bereitstellung von Systemdienstleistungen. Mit diesen und weiteren Fragestellungen zur Transformation des Elektrizitätssystems haben sich Nachwuchswissenschaftler der TU Dresden in den vergangenen zwei Jahren im Rahmen des vom Europäischen Sozialfonds – ESF geförderten Projekts EnerSAX auseinander gesetzt. Neben der Erstellung einer Potenzialanalyse für Sachsen wurden sowohl technische Fragestellungen,wie z.B. die Auswirkungen der Integration erneuerbarer Energien auf die Übertragungs-, Verteilungs-und Niederspannungsnetze, als auch ökonomische Fragestellung, wie z.B. die künftige Ausgestaltung der Regelenergiemärkte, untersucht. Durch die Zusammenarbeit der Nachwuchsforscher aus den Bereichen der Elektrotechnik und Energiewirtschaft konnten so integrierte Lösungsansätze zur Ausgestaltung einer weitgehend auf erneuerbaren Energien beruhenden Energieversorgung mit dem Fokus auf Sachsen im transnationalen Kontext erarbeitet werden. Die wesentlichen Ergebnisse aus dem Projekt werden in diesem Buch vorgestellt.

Die Bundesregierung plant im Rahmen der Energiewende den Anteil von erneuerbaren Energien an der Stromerzeugung in Deutschland von heute rund 25% auf 80% bis zum Jahr 2050 auszubauen. Damit stehen auch dem Stromsektor in Sachsen grundlegende Veränderungen bevor. Derzeit leistet im Freistaat Sachsen die Braunkohle den größten Beitrag zur Elektrizitätsbereitstellung. Mit dem zunehmenden Ausbau an erneuerbaren Energien steigt der Anteil dargebotsabhängiger Energieträger. Daraus resultieren technische und wirtschaftliche Herausforderungen für das bestehende Energiesystem, wie z.B. die künftige Bereitstellung von Systemdienstleistungen. Mit diesen und weiteren Fragestellungen zur Transformation des Elektrizitätssystems haben sich Nachwuchswissenschaftler der TU Dresden in den vergangenen zwei Jahren im Rahmen des vom Europäischen Sozialfonds – ESF geförderten Projekts EnerSAX auseinander gesetzt. Neben der Erstellung einer Potenzialanalyse für Sachsen wurden sowohl technische Fragestellungen,wie z.B. die Auswirkungen der Integration erneuerbarer Energien auf die Übertragungs-, Verteilungs-und Niederspannungsnetze, als auch ökonomische Fragestellung, wie z.B. die künftige Ausgestaltung der Regelenergiemärkte, untersucht. Durch die Zusammenarbeit der Nachwuchsforscher aus den Bereichen der Elektrotechnik und Energiewirtschaft konnten so integrierte Lösungsansätze zur Ausgestaltung einer weitgehend auf erneuerbaren Energien beruhenden Energieversorgung mit dem Fokus auf Sachsen im transnationalen Kontext erarbeitet werden. Die wesentlichen Ergebnisse aus dem Projekt werden in diesem Buch vorgestellt.

Kabel sind ein wichtiger Bestandteil des Elektroenergiesystems. Für die Kenntnis des Verhaltens von Kabeln sind Modelle erforderlich, die ihr Verhalten im stationären Zustand und bei transienten Vorgängen hinreichend genau abbilden können. Eine Methode zur Modellierung von Kabeln basiert auf konzentrierten Parametern. Hierbei wird das Kabel durch eine Ersatzanordnung, in der Regel durch eine Kaskade von π-Gliedern, modelliert. Das Prinzip dieser Modelle ist relativ einfach. Allerdings vernachlässigt das bisher verwendete π-Glieder-Kabelmodell die Frequenzabhängigkeit der Kabelparameter. Deshalb wird dieses Modell nur im stationären Zustand verwendet. In dieser Arbeit erfolgt die Entwicklung eines auf π-Gliedern basierenden Kabelmodells, mit dem der stationäre Zustand und die transienten Vorgänge beschrieben werden können. Dabei wird der Einfluss unterschiedlicher Faktoren auf die Resultate des neu entwickelten Kabelmodells sowohl im Frequenz- als auch im Zeitbereich ausführlich untersucht. / Cables are an important part of the electrical energy system. Describing the cable behavior by stationary or transients phenomena requires cable models with proper accuracy. The simulation of transients is more complicated than the calculation of currents and voltages in the nominal frequency range. The model has to represent the frequency dependency and the wave propagation behavior of cable lines. The introduced model is based on a cascaded π-section. A modal transformation technique has been used for the calculation in the time domain. The frequency-dependent elements of the related modal transformation matrices have been fitted with rational functions. The frequency dependence of cable parameters has been reproduced using a vector fitting algorithm and has been implemented into a RLC-network for each π-section. The proposed full model has been validated with measured data.

With the increasing electrification of todays society the electrical grid is experiencing increasing pressure from demand. One factor that affects the stability of the grid are the time intervals at which power demand is at its highest which is referred to as peak demand. This project was conducted in order to reduce the peak demand through a process called peak shaving in order to relieve some of this pressure through the use of batteries and renewable energy. By doing so, the user of such systems could reduce the installation cost of their electrical infrastructure as well as the electrical billing. Peak shaving in this project was implemented using machine learning algorithms that predicted the daily power consumption in school kitchens with help of their food menus, which were then fed to an algorithm to steer a battery according to the results. All of these project findings are compared to another system installed by a company to decide whether the algorithm has the right accuracy and performance. The results of the simulations were promising as the algorithm was able to detect the vast majority of the peaks and perform peak shaving intelligently. Based on the graphs and values presented in this report, it can be concluded that the algorithm is ready to be implemented in the real world with the potential to contribute to a long-term sustainable electrical grid while saving money for the user.

There has recently been an increased interest in hydrogen, both as a solution for seasonal energy storage but also for implementations in various industries and as fuel for vehicles. The transition to a society less dependent on fossil fuels highlights the need for new solutions where hydrogen is predicted to play a key role. This project aims to investigate technical and economic outcomes of different strategies for production and storage of hydrogen based on hydrogen demand and source of electricity. This is done by simulating the operation of different systems over a year, mapping the storage level, the source of electricity, and calculating the levelized cost of hydrogen (LCOH). The study examines two main cases. The first case is a system integrated with offshore wind power for production of hydrogen to fuel the operations in the industrial port Gävle Hamn. The second case examines a system for independent refueling stations where two locations with different electricity prices and traffic flows are analyzed. Factors such as demand, electricity prices, and component costs are investigated through simulating cases as well as a sensitivity analysis. Future potential sources of income are also analyzed and discussed. The results show that using an alkaline electrolyzer (AEL) achieves the lowest LCOH while PEM electrolyzer is more flexible in its operation which enables the system to utilize more electricity from the offshore wind power. When the cost of wind electricity exceeds the average electricity price on the grid, a higher share of wind electricity relative to electricity from the grid being utilized in the production results in a higher LCOH. The optimal design of the storage depends on the demand, where using vessels above ground is the most beneficial option for smaller systems and larger systems benefit financially from using a lined rock cavern (LRC). Hence, the optimal design of a system depends on the demand, electricity source, and ultimately on the purpose of the system. The results show great potential for future implementation of hydrogen systems integrated with wind power. Considering the increased share of wind electricity in the energy system and the expected growth of the hydrogen market, these are results worth acknowledging in future projects.