Skidding contributes to up to 35% of wet pavement accidents. Pavement surface friction therefore is an important component of highway safety. The skid resistance also varies seasonally and reduces over time due to surface polishing. These leave the pavement in a state of increased risk of skidding accidents. An adequate surface friction that accommodates the seasonal and long term variations is essential for safety over the pavement surface service life. The resistance to skidding, however, depends on surface microtexture and macrotexture. Alternatively, increased texture aimed at increased and durable surface friction may affect the noise generated on the road. In fact, traffic noise is a growing problem throughout the world. Noise barriers, traditionally used for noise reduction, are expensive and inefficient in some cases. As the pavement surface characteristics play a key role in noise generation and propagation, it provides a window for noise reduction by altering the pavement surface. The challenge, however, is to provide a smooth, quiet, long-lasting, and economic pavement with adequate and durable surface friction. This research has been directed to address this challenge and to provide a realistic guideline. The tire-pavement noise, sound absorption, and skid resistance performances of various flexible and rigid pavement surfaces have been examined using the field and laboratory test data. Models for the prediction of pavement skid resistance including the seasonal and long term variations have also been developed correlating the influencing factors. A value engineering approach has been proposed to accommodate the construction and maintenance costs, longevity, smoothness, safety and noise in the selection of pavement surfaces.

Skidding contributes to up to 35% of wet pavement accidents. Pavement surface friction therefore is an important component of highway safety. The skid resistance also varies seasonally and reduces over time due to surface polishing. These leave the pavement in a state of increased risk of skidding accidents. An adequate surface friction that accommodates the seasonal and long term variations is essential for safety over the pavement surface service life. The resistance to skidding, however, depends on surface microtexture and macrotexture. Alternatively, increased texture aimed at increased and durable surface friction may affect the noise generated on the road. In fact, traffic noise is a growing problem throughout the world. Noise barriers, traditionally used for noise reduction, are expensive and inefficient in some cases. As the pavement surface characteristics play a key role in noise generation and propagation, it provides a window for noise reduction by altering the pavement surface. The challenge, however, is to provide a smooth, quiet, long-lasting, and economic pavement with adequate and durable surface friction. This research has been directed to address this challenge and to provide a realistic guideline. The tire-pavement noise, sound absorption, and skid resistance performances of various flexible and rigid pavement surfaces have been examined using the field and laboratory test data. Models for the prediction of pavement skid resistance including the seasonal and long term variations have also been developed correlating the influencing factors. A value engineering approach has been proposed to accommodate the construction and maintenance costs, longevity, smoothness, safety and noise in the selection of pavement surfaces.

Accurate characterization and evaluation of tire/pavement friction is critical in assuring runway and highway safety. Historically, Pavement Friction Measurement Devices (PFMDs) employing different measuring mechanisms have been used to evaluate tire/pavement friction. They yield significantly disparate friction coefficients under the same contact conditions. Currently, an empirically developed data harmonization method based on a reference device (Dynamic Friction Tester (DFT)) is used in an attempt to overcome the disparities between the measurements using various different PFMDs. However, this method, which has been standardized by the American Society for Testing and Materials (ASTM E1960), has been criticized for its inconsistency by researchers and runway/highway operations personnel. The objective of this dissertation research was to develop a systematic and physically intuitive harmonization method for PFMDs that will improve the comparability of their data. As a foundation for such a harmonization, the LuGre tire model that employs physically meaningful parameters to represent the main attributes of tire/pavement friction was evaluated and validated. Measurements of tire/pavement friction by three widely used PFMDs; Locked Wheel Skid Trailer (LWST), Runway Friction Tester (RFT) and DFT, were accurately predicted using nonlinear optimization of LuGre model parameters. The LuGre model was found to be superior compared to the model used in the current ASTM E1960 standardization procedure for predicting PFMD measurements. A sensitivity analysis was performed to identify the relative significance of the LuGre model parameters in characterizing tire/pavement friction, and to study the effects of variation of those parameters on predicted frictional behavior. A set of laboratory tire experiments was designed and performed to validate the physical significance of LuGre tire model parameters and to study how they behave under typical load, inflation pressure, excitation frequency, and amplitude conditions. An empirical method was developed to accommodate the effects of water film thickness on tire/pavement friction in the LuGre model. The results of the sensitivity analysis and the experiments to directly estimate the model parameters were used to identify and quantify appropriate modifications to the measurement mechanisms of PFMDs that can be introduced to improve the comparability of their results. Friction experiments performed after introducing such modifications to the LWST showed an average reduction of 20% in the deviations between the results of LWST and RFT measurements. The research carried out in this dissertation is significant because it: (i) identified the deficiencies in the current method for harmonizing PFMD measurements and the underlying reasons for these deficiencies, (ii) emphasized the importance of a standardization approach that regulates the physical condition of PFMDs, in order to achieve universal comparability of tire/pavement friction measurements, (iii) validated that the LuGre tire model is a tire/pavement friction model capable of facilitating a better standardization approach, and, (iv) initialized the development of a physically meaningful harmonization procedure for PFMDs.

Induced vibrations due to tire-pavement interaction are one of the main sources of vehicle exterior noise, especially near highways and main roads where traveling speeds are above 50 kph. Its dominant spectral content is approximately within 500-1500 Hz. However, accurate prediction tools within this frequency range are not available. Current methods rely on structural modeling of the complete tire using finite elements and modal expansion approaches that are accurate only at low frequencies. Therefore, alternative physically-based models need to be developed. This work proposes a new approach that incorporates wave behavior along the tire's circumferential direction, while modes are assumed along its transversal direction. The formulation for new infinite plate and cylindrical shell structural models of a tire is presented. These are capable of accounting for orthotropic material properties, different structural parameters between the belt and sidewalls, inflation pressure, and rotation of the tire. In addition, a new contact model between the pavement and the tire is developed presented. The excitation of the tire due to the impact of the tread-pattern blocks in the contact patch region is characterized and coupled to the structure of the tire. Finally, a Boundary Element Method is implemented in order to compute the vibration-induced noise produced by the tire. All the modeling components are combined in a single prediction tool named Wave Pro Tire. Lastly, simulated responses and validation cases are presented in terms of harmonic responses, Frequency Response Functions (FRF), and produced noise. / Doctor of Philosophy / Induced vibrations due to tire-pavement interaction are one of the main sources of vehicle exterior noise, especially near highways and main roads where traveling speeds are above 50 kph. Accurate prediction tools are not currently available. Therefore, new physically based models need to be developed. This work proposes a new approach to model the tire’s structure with a formulation that accounts for multiple physical phenomena. In addition, a model that simulates the contact between the pavement and the tire’s tread is presented. Finally, the vibrations are coupled to the produced noise in a single prediction tool named Wave Pro Tire. This work also includes simulated responses and validation cases.

This work describes the implementation of a novel dynamic Arbitrary Lagrangian Eulerian (ALE) formulation for the simulation of pavement structures loaded by rolling tires in a finite element framework. The proposed formulation enables the simulation of dynamic effects like acceleration, deceleration and variation of the wheel load on the pavement. The ALE scheme is described for a hyperelastic St. Venant-Kirchhoff material capable of finite deformations. With the adoption of this dynamic ALE formulation, a significant improvement in terms of speed and efficiency of the simulation is achieved in comparison to a classical transient Lagrangian formulation. This is primarily because only the relevant portion of the mesh around the applied load needs to be discretized and simulated. Another benefit is that a cumbersome moving load formulation does not need to be implemented. The results show satisfactory agreement with a conventional Lagrangian simulation with a moving load.

L'apparition récente de nouveaux matériaux dans les structures de chaussée associée à une diminution de l'épaisseur des couches de surface et une augmentation du chargement des poids lourds et de leur fréquence de passage a entrainé de nouvelles pathologies de dégradation. Outre les problèmes d'orniérage bien connus, apparaissent désormais des fissures descendantes (top down cracking) ainsi que des problèmes de décohésion aux interfaces. Ces nouvelles pathologies entrainent des dépenses considérables sur l'ensemble du réseau (environ 15 milliards d'euros par an), particulièrement en zones urbanisées plus sujettes aux dégradations de surface et ne permettent pas d'estimer convenablement les durées de vie de la chaussée, le plus souvent surestimée dans les méthodes de dimensionnement actuelles. Ce travail de doctorat propose une nouvelle approche du contact pneu-chaussée permettant de mieux appréhender les contraintes principales et résiduelles dans une structure de chaussée bitumineuse. A l'aide d'un outil numérique rapide de calcul basé sur une approche semi-analytique (« Semi-Analytical Methods » (SAM)), la géométrie précise du pneumatique est intégrée afin d'obtenir une répartition de pression de contact ainsi qu'un cisaillement surfacique réelle sur la chaussée. Dans un premier temps, un modèle de contact roulant tractif élastique est implémenté pour des cas théoriques simples et validé par des résultats analytiques et numériques de la littérature. Ensuite, ce modèle est étendu pour prendre en compte le comportement élasto-plastique des corps en contact. Ce dernier est comparé à un résultat numérique basé sur la méthode des éléments finis issu de la littérature. Les résultats, pour une application contact pneu-chaussée, montrent une répartition non homogène des contraintes dans la structure et principalement dans les premiers centimètres sous la surface avec des niveaux beaucoup plus importants que peuvent le prédire les modèles actuels qui utilisent une charge uniformément répartie. La pression de contact est comparée aux mesures effectuées par un système nommé TekScan et les champs mécaniques en sous couches sont comparés à ceux d'Alizé-LCPC dans le cas d'une structure simple. Les cisaillements surfaciques sont déterminés dans le cas du roulement tractif. Une application est effectuée sur la modélisation des dégradations des chaussées en surface. Dans un premier temps, des analyses sur le comportement de la chaussée en surface sont effectuées pour une couche de béton bitumineux semi grenu (BBSG) semi-infinie supposée élastique, homogène sous conditions d'accélération, de freinage et de virage. Pour des études sur le top down cracking, des déformations et directions principales sont déterminées et analysées. Ensuite, le modèle de contact élasto-plastique est appliqué sur une couche semi-infinie de grave bitume GB3. Des déformations et contraintes résiduelles générées dans la structure sont déterminées en vue d'une analyse sur les ornières d'instabilité. Une fois validés, ces résultats permettront d'estimer plus fidèlement la durée de vie résiduelle des chaussées mais également de comprendre et d'éviter les mécanismes de dégradation en surface ou proche de la surface. / The recent appearance of new materials in road structures associated with surface layers thickness decreasing and the increasing of trucks loading and their passage frequency has led to new pathologies of degradation. In addition to the well-known rutting problems, top down cracking is now appearing as well as problems of decohesion at the interfaces. These new pathologies led to considerable expenditure on the entire network (around 15 billion euros per year), particularly in urbanized areas that are more prone to surface damage and do not make it possible to adequately estimate the lifetimes of the roadway, most often overestimated in current design methods. This doctoral work proposes a new approach of the tire-road contact allowing for better apprehend of the main and residual stresses in a bituminous pavement structure. Using a fast numerical tool based on a semi-analytical approach ("Semi-Analytical Methods" (SAM)), the precise geometry of the tire is integrated in order to obtain a real contact pressure distribution as well as surface shear on the pavement surface. Initially, an elastic tractive rolling contact model is implemented for simple theoretical cases and validated by analytical and numerical results from the literature.Then, this model is extended to take into account the elastoplastic behavior of the bodies in contact. This is compared to a numerical result based on the nite element method from the literature. The application for tire-pavement contact results, show a non-uniform distribution of stresses in the structure and mainly in the rst centimeters below the surface with much higher levels than can be predicted by current models that use a uniformly distributed load. The contact pressure is compared to the measurements made by a system called TekScan and the mechanical elds in sublayers are compared to those of Alizé-LCPC in the case of a simple structure. The surface shears are determined in the case of tractive rolling. An application is carried out on the modeling of surface pavement damage. Firstly, analyzes of the behavior of the surface pavement are carried out for a semi-innite semi-grit asphalt concrete layer supposed to be elastic, homogeneous under conditions of acceleration, braking and turning. For studies on top down cracking, principals deformations and directions are determined and analyzed. Then, the elastoplastic contact model is applied on a semi-innite asphalt agragate layer. Deformations and residuals stresses generated in the structure are determined for an analysis on the instability ruts. Once validated, these results will make it possible to more accurately estimate the residual life of pavements but also to understand and avoid surface or near surfacedegradation mechanisms.

Various improvements which have been made to the vehicle (reduced engine noise, reducedaerodynamic related NVH), have resulted in tire road noise as the dominant source of thevehicle interior noise. Generally, vehicle interior noise has two main sources, 1) travellinglow frequency excitation below 800 Hz from road surface through a structure- borne pathand 2) the high frequency (above 800 Hz) air-borne noise that is caused by air- pumpingnoise caused by tread pattern.The structure-borne waves of the circumference of the tire are generated by excitation atthe contact patch due to the road surface texture and characteristics. These vibrations arethen transferred from the sidewalls of the tire to the rim and then are transmitted throughthe spindle-wheel interface, resulting in high frequency vibration of vehicle body panels andwindows.The focus of this study is to develop several statistical-based models for analyzing the roadsurface and using them to predict the tire-road noise structure-borne component. In order todo this, a new methodology for sensing the road characteristics, such as asperities and roadsurface condition, were developed using virtual sensing and intelligent tire technology. In ad-dition, the spindle forces were used as an indicator to the structure-borne noise of the vehicle.Several data mining and multivariate analysis-based methods were developed to extractfeatures and to develop an empirical model to predict the power of structure-borne noiseunder different operational and road conditions. Finally, multiple data driven models-basedmodels were developed to classify the road types, and conditions and use them for the noisefrequency spectrum prediction. / Doctor of Philosophy / Multiple data driven models were developed in this study to use the vibration of the tirecontact patch as an input to sense some characteristics of road such as asperity, surface type,and the surface condition, and use them to predict the structure-borne noise power. Also,instead of measuring the noise using microphones, forces at wheel spindle were measuredas a metric for the noise power. In other words, a statistical model was developed that bysensing the road, and using the data along with other inputs, one can predict forces at thewheel spindle.

The task of the master's thesis is introduction with the problems of traffic noise, focusing on noise from road traffic. There is a description what is the noise, how it is formed, its resources and what are the methods of measuring. The following are the various noise reduction measures such as noise barriers and low noise pavements. The main attention is devoted to the noise generated at the tire / road that is reduced by these pavements. The practical part describes the implemented measurements on individual sections at various locations in our country. The measurement was carried by slightly modified method CPX with reference tire directly at the vehicle. The main aim was to evaluate the measurement data, make comparison of different low-noise surfaces with each other and with the commonly used surfaces. Then quantification of the rate reduction of the noise emission for a given section and verification of input data for noise modeling. In conclusion, the obtained results are summarized and based on them were confirmed very good acoustic properties with the recommendation to continue with measurements in the future.