Spelling suggestions: "subject:"tak""
111 |
Vliv změny posturální stability na sílu respiračních svalů / Influence of postural stability changes on respiratory muscle strenghtDařinová, Jitka January 2015 (has links)
The presented thesis is focused on the influence of postural stability changes on respiratory muscle strength. The aim of this thesis was to determinate whether the respiratory muscle strength will change during the increased demands on postural stability, and if so, then how exactly. The theoretical part summarized the findings about the diaphragm and its postural stabilizing function, about the connection between breathing and postural control as well as about the influence of body position on respiratory muscle strength. In the practical part of the thesis, the values of the maximal respiratory mouth pressures were measured (PI max and PE max) on 21 healthy subjects ranging from 20 to 26 years of age using the spirometer in three postural situations - standing, standing on the balance surface and standing on the balance surface with no visual control. Throughout the whole group, there were no significant statistical differences ( p ≥ 0,05 ) in the outcome values of the measured postural situations. Two trends were observed in the changes of values of PI max and PE max. During the increased demands for postural stability the value of PI max was higher for 29% and lower for 71% of the measured individuals. The value of PE max was higher for 33% and lower for 67% of the measured individuals. This...
|
112 |
Stanovení nových referenčních hodnot maximálních inspiračních a expiračních tlaků a hodnot PO.1 u normální populace ve věkovém rozmezí 16 až 17 let / Definition of new referential values of maximum inspiratory and expiratory pressures and P0.1 values in normal population of the 16 - to - 17 age rangeKálalová, Tereza January 2014 (has links)
The purpose of this thesis is to define norms for inspiratory (Pimax) and expiratory (Pemax) pressures and mouth occlusion pressure (P0.1) in healthy white population of the 16-17 age group in the Czech Republic, specifically the capital city of Prague and its close vicinity. Furthermore, this work aspires to ascertain whether there is a correlation between the respiratory pressures, P0.1 and selected anthropometric and pulmonary values. In order to define the norms, 79 children were tested, including 41 boys and 38 girls 16 to 17 years old. After establishing the subjects' case histories, anthropometric, spirometric inspiratory, expiratory and forced vital capacity measurements were made. The study defined the norms of respiratory pressures and P0.1 in 16 to 17-year-old boys and girls, thus achieving its main goal. Furthermore, a difference was found between the average measured Pimax and Pemax values for boys and girls, with the boys showing higher values comparing with the girls. The study did not ascertain a correlation between respiratory pressures, P0.1 and selected anthropometric values (age, height, weight, BMI, BSA). No correlation was found between respiratory pressures and static pulmonary volumes. Powered by TCPDF (www.tcpdf.org)
|
113 |
Optimalizace hydraulického systému a jeho prvků pro malá dopravní letadla / Optimization of Hydraulic System and its Components for Commuter Category AirplanesKameník, Luboš January 2012 (has links)
The dissertation thesis deals with optimization of the selected areas of the hydraulic system for small and medium transport aircrafts. Newly developed small aircraft EV-55 is a representative in the category of the small aircrafts . The selected areas of the hydraulic systems , important and useful for domestic producers of the hydraulic devices and whole hydraulic systems for the airplane EV-55 , are subjected to optimization efforts in the dissertation thesis. Design parameters of the hydraulic system (type of hydraulic source, level of pressure, weight of connecting tube), hydraulic devices ( tribology, machining process), simulation of the servomechanism and areas of diagnostic of technical status of the hydraulic system are optimized in the dissertation thesis.
|
114 |
Kvantifikace mechanismů hydraulického odstranění okují / Quantification of Hydraulic Descaling MechanismsHrabovský, Jozef January 2012 (has links)
The issue of descaling is an important part of the forging and heat treatment of steel and semi products of steel production. Rising of new information and study of this process can increase efficiency and improve the surface quality after descaling. This thesis is focused on the mechanisms of the high pressure hydraulic descaling qualification and study of the chemical compounds of which the scales grown. To achieve all goals of this work and to get a comprehensive view of descaling process, few experimental measurements and numerical analyses were performed. All experimental measurements were focused on obtaining data about fundamental parameters and effects of the hydraulic descaling. The data obtained from measurements were applied to numerical analyses, which aimed to discover a deeper relation and to confirm the experimental results. This thesis can be divided into two main parts. The first part is devoted to parameters of the water jet study. The main studied characteristics of the high pressure hydraulic water jet were heat transfer coefficient and impact pressure at different modes such as standard or pulsating water jet. Experimentally measured data of these parameters were applied in numerical analyses. The numerical analyses were focused on studying the impact of the water jet parameters on the stresses in the oxide scale layers. A further water jet analysis was focused on the influence of the individual parts of the hydraulic system (such as water chamber or stabilizer) on its characteristics. In this part different types of the water chambers in combination with different types of stabilizers on the impact pressure values were investigated. These measurements were supported by fluid flow analysis through the hydraulic system. The second part of this work was focused on getting mechanical properties of the oxide scales from specimens prepared from standard structural steel and specimens from silicon steel. In this thesis, the influence of various parameters and characteristics was studied on these two types of steel. Mechanical properties of oxide scale structures were carried out by the Small Punch Test method. To obtain the fundamental mechanical properties such as Young´s modulus, yield strength and ultimate strength, material parameters based on the measured data were optimized. The whole work was carried out in order to get valuable and comprehensive results about high pressure hydraulic descaling process and influencing factors as well as about oxide scales themselves.
|
115 |
Možnosti ovlivnění krevního tlaku při vertikalizaci pacientů s míšní lézí / Possibilities of influencing blood pressure in spinal cord injury patients during verticalizationVěchetová, Tereza January 2012 (has links)
Orthostatic hypotension is a common problem for individuals with spinal cord lesions, especially in the acute period after spinal cord injury. The first part of this study deals with the theoretical analysis of the pathophysiology of cardiovascular control after spinal cord injury, the definition of orthostatic hypotension and its inclusion within the classification of the syncopal conditions. An important part of the theoretical part is the management of orthostatic hypotension, which brings non-pharmacological therapeutic approaches, and marginally pharmacology, to decrease the severity of this condition. The experimental part focuses on testing of a group of probands with spinal cord injury (11 quadriplegics) on two different types of tilt tables according to the same protocol. The first tilt table is a standard; the second one is Erigo, tilt table with integrated robotic mechanism, which moves the legs to simulate walking. The parameters, such as blood pressure, heart rate, oxygen saturation, and the occurrence and severity of pre-synkopal symptoms, were compared. The study is based on the assumption that passive leg movement, which is mediated by the Erigo, will maintain venous return, cardiac output, and a significant drop in blood pressure and development of orthostatic hypotension,...
|
116 |
Faktory ovlivňující postoje žáků 2. stupně ZŠ ke zdravému životnímu stylu / Factors influencing pupils' attitudes towards a healthy lifestyleKubíková, Martina January 2019 (has links)
The diploma thesis deals with attitudes of 2nd grade primary school pupils to a healthy lifestyle. Trying to answer the question Which of the factors offered are the most interesting for this target group and therefore the most motivating? Work and unveiling personal and social lives and their views on human health today. The research tool is a questionnaire on two different and independent schools. It goes through a deeper probe in to the viewer level and at the same time reveals their everyday leisure habits. At the end of the thesis, an alternative offer of educational activities is proposed, which can complement the upcoming offer that is currently being implemented in schools. KEYWORDS Healthy, life style, family, movement habits, school environment, media pressure, free time activities
|
117 |
Hemodynamická optimalizace u jaterních resekcí / Hemodynamic optimalization in hepatic recectionZatloukal, Jan January 2017 (has links)
Lowering of central venous pressure in hepatic surgery is nowadays widely recommended and used procedure. Low central venous pressure anesthesia is associated with decreased blood loss and improved clinical outcome. There are several approaches how to reach low central venous pressure. Till now none of them is recommended as superior in terms of patient safety and clinical outcome. Concurrently there is still debate if to use the low central venous pressure anesthesia principle or if it could be replaced with a principle of anesthesia with high stroke volume variation (or another dynamic preload parameter) with the use of a more sophisticated hemodynamic monitoring method. Results of our study didn't show any significant difference between two approaches used for reduction of central venous pressure, but suggest that the principle of low central venous pressure anesthesia could be possibly replaced by the principle of high stroke volume variation anesthesia which presumes the use of advanced hemodynamic monitoring. KEYWORDS Hepatic resection, central venous pressure, Pringle maneuver, hemodynamics, hemodynamic monitoring, fluid therapy, anesthesia
|
118 |
Proudění biologických tekutin v reálných geometriích / Flow of biological fluids in patient specific geometriesŠvihlová, Helena January 2017 (has links)
1 Abstract: Time-dependent and three-dimensional flow of Newtonian fluid is studied in context of two biomechanical applications, flow in cerebral aneurysms and flow in stenotic valves. In the first part of the thesis, the computational meshes obtained from the medical imaging techniques are used for the computation of hemodynamic parameters associated with the rupture potency of the cerebral aneurysms. The main result is the computation within twenty geometries of aneurysms. It is shown that the aneurysm size has more important role in wall shear stress distribution than the fact whether the aneurysm is ruptured or unruptured. The second part of the thesis is addressed to the flow in stenotic valves. It is shown that the method cur- rently used in medical practice is based on assumptions which are too restrictive to be apply to blood flow in the real case. The full continuum mechanics model is presented with physiologically relevant boundary conditions and it is shown that results are consistent with measured data obtained from literature. Then we focus on the obtaining the pressure field from the velocity field. The presented method provides more accurate pressure approximation than commonly used Pressure Poisson Equation. The last chapter of the thesis is dedicated to Nitsche's method for treating slip boundary...
|
119 |
Analýza mechanických vlastností balzového dřeva na mesoúrovni pomocí zkušebního stroje iErudioGrossová, Olga January 2015 (has links)
This thesis analysis the mechanical properties of balsa wood mesolevel using the test machine iErudio. The thesis aim is to experimentally determine the mechanical properties of balsa wood (Ochroma lagopus). On the prototype minimachine iErudio is a set of measurements. Specifically, tensile and bending tests. Another objective is to determine the Poisson ratio on measured levels. These properties will be obtained from image data recorded device iErudio and calculated using the digital image correlation. Another objective is to evaluate the work done with the prototype device, point out the advantages and disadvantages. To analyse data using a commercial computer program VIC 3D and Mercury RT, which process the results using digital image correlation. The work has provided us with confirmation of mechanical characteristics of balsa and the suitability of using "minimachine" iErudio the performed tests.
|
120 |
Technické památky na Třeboňsku a jejich uplatnění ve výuce na 1. stupni ZŠ / The Technical Monuments in Třeboň Region And How to Use Them in Primary School EducationŠIMÁČKOVÁ, Jindřiška January 2016 (has links)
The topic of this thesis is called "Technical Landmarks in the Třeboňsko Region and their Application in First Grade Primary School Education." The theoretical part focuses on project teaching and the competencies of the first grade primary school pupil in the area of technical education according to the FEP for basic education, chapter "Humans and Their World (Člověk a jeho svět)". Furthermore, this thesis deals with technical landmarks in the Třeboňsko region. The practical part contains several technical landmarks which may be used as inspiration when creating educational projects for structural and technical education. Some of these projects have been applied in teaching in a small-class primary school. The final part of the thesis contains questionnaires given to first grade primary school teachers to test the indicative functionality of these projects.
|
Page generated in 0.0351 seconds