Kyoto University (京都大学) / 0048 / 新制・課程博士 / 博士(工学) / 甲第15001号 / 工博第3175号 / 新制||工||1477(附属図書館) / 27451 / UT51-2009-R725 / 京都大学大学院工学研究科都市社会工学専攻 / (主査)教授 岡田 憲夫, 教授 小林 潔司, 教授 多々納 裕一 / 学位規則第4条第1項該当

No description available.

This study presents a probabilistic lava flow hazard assessment for the Idaho National Laboratory (INL) and the cities of Idaho Falls and Pocatello, Idaho. The impetus of this work is to estimate the conditional probability that a lava flow on the eastern Snake River Plain (ESRP) will impact the areas of interest given the formation of a new volcanic vent in the region. A list of 288 eruptive events, derived from a previously published inventory of 506 surface and 32 buried vents, was created to reduce the biasing of spatial density maps towards eruptions with multiple dependent vents. Conditional probabilities of new vents and events occurring on the ESRP were modeled using the the Sum of Asymptotic Mean Squared Error (SAMSE) optimal pilot bandwidth estimator with a bivariate Gaussian kernel function. Monte Carlo analyses of potential eruption scenarios were performed using MOLASSES, a cellular automata fluid flow simulator. Results show that Idaho Falls is impacted <1% of the time for both the vent and event simulations; Pocatello is not impacted by any simulated flows. 25.45% of vent flows and 33.74% of event flows breach the boundaries of INL. 18.27%of vent and 25.85% of event simulations initiate on the INL property. Annual inundation probabilities of 1.06 x 10-4 for vent-based flows and 7.12 x 10-5 for event-based flows are reported for INL; annual probabilities of an eruptive center initiating on INL property are 7.60 x 10-5 for vents and 5.45 x 10-5 for events. All of these values exceed the International Atomic Energy Agency’s acceptable risk probability of 10-7 by several orders of magnitude.

Master of Science / Department of Geology / Matthew E. Brueseke / The Sonya Creek volcanic field (SCVF) contains the oldest in situ magmatic products in the ~29 Ma–modern Wrangell arc (WA) in south-central Alaska. The WA is located within a transition zone between Aleutian subduction to the west and dextral strike-slip tectonics along the Queen Charlotte-Fairweather and Denali-Duke River fault systems to the east. WA magmatism is due to the shallow subduction (11–16°) of the Yakutat microplate. New ⁴⁰Ar/³⁹Ar and U-Pb geochronology of bedrock and modern river sediments shows that SCVF magmatism occurred from ~29–18 Ma. Volcanic units are divided based on field mapping, physical characteristics, geochronology, and new major and trace element geochemistry. A dacite dome yields a ~29 Ma ⁴⁰Ar/³⁹Ar age and was followed by eruptions of basaltic-andesite to dacite lavas and domes (~28–23 Ma Rocker Creek lavas and domes) that record hydrous, subduction-related, calc-alkaline magmatism with an apparent adakite-like component. This was followed by a westward shift to continued subduction-related magmatism without the adakite-like component (e.g., mantle wedge melting), represented by ~23–21 Ma basaltic-andesite to dacite domes and associated diorites (“intermediate domes”). These eruptions were followed by a westward shift in volcanism to anhydrous, transitional, basaltic-andesite to rhyolite lavas of the ~23–18 Ma Sonya Creek shield volcano (Cabin Creek lavas), including a rhyolite ignimbrite unit (~19 Ma Flat Top tuff), recording the influence of local intra-arc extension. The end of SCVF activity was marked by a southward shift in volcanism back to hydrous calc-alkaline lavas at ~22–19 Ma (Young Creek rocks and Border Lavas). SCVF geochemical types are very similar to those from the <5 WA, and no alkaline lavas that characterize the ~18–10 Ma Yukon WA are present. Sr-Nd-Pb-Hf radiogenic isotope data suggest the SCVF data were generated by contamination of a depleted mantle wedge by ~0.2–4% subducted terrigenous sediment, agreeing with geologic evidence from many places along the southern Alaskan margin. Our combined dataset reveals geochemical and spatial transitions through the lifetime of the SCVF, which record changing tectonic processes during the early evolution of the WA. The earliest SCVF phases suggest the initiation of Yakutat microplate subduction. Early SCVF igneous rocks are also chemically similar to hypabyssal intrusive rocks of similar ages that crop out to the west; together these ~29–20 Ma rocks imply that WA initiation occurred over a <100 km belt, ~50–60 km inboard from the modern WA and current loci of arc magmatism that extends from Mt. Drum to Mt. Churchill.

The Nahlin ophiolite represents one of the largest (~80 km long) and best-preserved ophiolites in the Cordillera of British Columbia and Yukon, Canada, yet it has been understudied compared to other ophiolites worldwide. Bedrock mapping at 1:20,000 scale in the Menatatuline Range area shows that the ophiolite is structurally disrupted with mantle bodies divisible into two massifs: Hardluck and Menatatuline. Studies of 30 samples show that both massifs consist of spinel harzburgites and minor lherzolites that have been strongly depleted by melt extraction (<2 wt % Al2O3 and ~45 wt % MgO). Clinopyroxene REE abundances determined by LA-ICP-MS illustrate different extents of depletion between the two massifs, with YbN varying from 2.3 – 5.0 and 1.7 – 2.2 in the Hardluck and Menatatuline massifs, respectively. Inversion modelling of the clinopyroxene REE abundances yields ~10 – 16% melting in the Hardluck massif and ~16 – 20% melting in the Menatatuline massif, with melt compositions that are compositionally similar to the gabbros and basalts proximal to the mantle rocks. All these extrusive and intrusive rocks in the ophiolite have an arc-signature, implying that the Nahlin ophiolite formed in a supra-subduction zone (SSZ) environment. The Nahlin peridotites document a two-stage evolution: depletion of a locally heterogeneous mantle source by hydrous fractional melting, followed by refertilization of the refractory harzburgite in the mantle wedge evidenced by LREE enrichment in clinopyroxene and whole-rock chemistry. This two-stage evolution is also recorded by the thermal history of the harzburgites. The REE-in-two-pyroxene thermometry has been reset following cryptic and modal metasomatism and relatively slow cooling, whereas major element two pyroxene geothermometry records temperatures varying from near solidus (~1290 °C) to ~800 °C, with the highest temperatures recorded in samples from the Menatatuline massif. The refractory nature of the Menatatuline harzburgites in combination with the arc-influenced volcanic geochemistry provides overwhelming evidence for a SSZ origin. Peridotite from the Hardluck massif displays characteristics of both abyssal and SSZ peridotites. These geochemical and geothermometric constraints can be reconciled by evolution of the Hardluck and Menatatuline massifs as two separate segments along a backarc ridge system, later juxtaposed by dextral strike-slip faulting. Alternatively, the Nahlin ophiolite may represent proto-forearc seafloor spreading associated with subduction initiation akin to the proposed origins of the Izu-Bonin-Mariana arc (Stern et al. 2012; Maffione et al. 2015). In any case, the geochemical data for peridotites and magmatic rocks herein require that the SSZ-type Nahlin ophiolite reside in the upper plate at an intraoceanic convergent margin. This interpretation has strong implications for models of northern Cordilleran tectonics, where the Cache Creek terrane is typically shown as a subducting ocean basin during Cordilleran orogenesis. / Graduate

Fluid-mobile elements (FMEs) such as B, Cs, As, Li and Tl can mobilize readily under low P-T conditions (0.2-0.5 GPa). This makes them effective geochemical tracers that can be used as a way of tracking fluid-rock exchanges at the shallow depths encountered in the earliest stages of subduction. The Izu-Bonin-Mariana (IBM) subduction system is unique in that it preserves a record of the sequences produced from the onset of subduction through the development of arc magmatism. International Ocean Discovery Program (IODP) Expedition 352 recovered >800m of boninite core material from the earliest IBM magmatic events. Select boninitic glasses from these IODP 352 cores, found mostly as selvages on the rinds of pillow lavas and as clasts within hyaloclastites, were examined via EPMA and laser ablation ICP-MS techniques. The boninite glasses analyzed were separated into two categories – low-silica boninite (LSB) and high-silica boninites (HSB), based on the bulk chemistry and mineralogy of the lithostratigraphic locations from which the glass samples occur in the drill core. LSB are the earlier erupted boninite series, which show both greater variation in extent of differentiation and reflect less depleted mantle sources than HSB. Boron concentrations in the Expedition 352 boninite glasses analyzed range from 0.08 to 12.91 ppm, arsenic contents vary from 0.15 to 3.26 ppm, and cesium varies from 0.01 to 0.91 ppm. Lithium concentrations in the boninites range from 1 to 18.35 ppm while Tl concentrations vary from 10 to 155 ppb. FME concentrations trend toward higher values in HSB than in LSB. Low-Si boninites appear to form via simple mixing of depleted mantle source and an FME enriched fluid endmember, which mobilizes B, As, Cs, (Tl) and Li very early in the subduction process. Coupled with inputs from upwelling mantle, this FME-rich fluid triggers fluid-fluxed boninite melting. The high-Si boninites reflect the addition of a subduction component with a higher Ba/La ratio than that of the depleted mantle; this higher ratio more closely resembles that of Mariana cherts from altered Pacific crust. Thus, the high-Si boninites are consistent with the fluid-fluxed melting of a highly depleted, harzburgitic mantle source and reflect inputs of two distinguishable slab-derived components, one that is sedimentary in nature and another that is FME-enriched. This model for melting that is more similar to the melting regime of modern arcs and reflects the transition from early extension-related melting into that of a “normal” subduction system.

Several hundred chemical analyses of early Proterozoic lavas of the Witwatersrand triad (incorporating the Dominion Group, Witwatersrand Supergroup and Ventersdorp Supergroup) in the Klerksdorp area, have revealed the presence of various distinct magma types. These essentially correspond to formally defined lithostratigraphic units, but several inconsistencies have necessitated the use of informal nomenclature. The lavas have been regionally metamorphosed to low-grade, greenschist facies assemblages. Original igneous textures are preserved, despite a metamorphic overprint. Metamorphism has resulted in a certain degree of random chemical remobilization. Ba, Sr, Rb, K₂0, Na₂0 and CaO have been highly mobile, and their usefulness in petrogenetic modelling is extremely limited. In contrast, Zr, Nb, Y, LREE's, Cr, Ni, Ti0₂ P₂0₅ and Al₂0₃ have remained immobile. Ti/Zr and Ti/P ratios together constitute efficient discriminating variables for characterizing the different magma types. Lava compositions range from primitive Mg-rich tholeiites to rhyolites, the bulk being tholeiitic andesites. Al₂0₃ contents do not exceed 15%, a feature which reflects the tholeiitic, as opposed to calcalkaline, character of these lavas. Two magma-types are present within the Dominion Group, which is a typical example of bimodal volcanism. The Dominion basic lavas are overlain by the Dominion acid porphyries, with a limited amount of interfingering. The basic lava suite is highly fractionated, with compositions ranging from Mg-, Cr- and Ni-rich tholeiites (close to primary mantle melts) to evolved tholeiitic andesites. The most primitive liquids evolved by 45% fractional crystallization of hornblende, followed by a further 70% crystallization of an orthopyroxene-plagioclase assemblage containing up to 3% sulphides. The Dominion porphyries are rhyolitic, display very limited compositional variation, and probably represent a crustal melt related to the same magmatic event which produced the basic lavas. The only lavas from the Witwatersrand Supergroup present in the Klerksdorp area are those of the Crown Formation (Jeppestown amygdaloid). These are tholeiitic dacites which display extremely limited compositional variation, and are unrelated to any of the other magmas of the Witwatersrand triad. The Ventersdorp Supergroup comprises 4 magma-types: The Kliprivierberg Group lavas at the base are subdivisible into 3 sub-types on the basis of Zr contents. (Zr>11Oppm) are the most evolved. They are tholeiitic andesites which display fairly limited compositional variation. It is likely that more evolved compositions are present in other areas where the porphyritic lavas which characterize this unit are better developed. The overlying Orkney lavas are characterized by 110ppm>Zr>90ppm. They are tholeiitic andesites of similar composition to the Alberton lavas, but have lower incompatible element levels, higher siderophile element levels, and are of extremely uniform composition. The uppermost Loraine/Edenville lavas range from magnesian tholeiites to tholeiitic andesites. They are distinguished by Zr< 90ppm, and contain the most primitive magmas af the Witwatersrand triad, with up to 17,5% MgO, 2600ppm Cr, 600ppm Ni and M-values up to 77. The most primitive liquids evolved by 38% fractional crystallization of orthopyroxene ∓ chromite, followed by 35% fractional crystallization of an extract containing clinopyroxene and plagioclase. The absence of olivine precipitation is a result of the inherently high Si0₂ content of the magma. The Loraine/Edenville, Orkney and Alberton lavas do not lie on a common liquid line of descent, but are probably consanguinous. The Platberg Group overlies the Kliprivierberg Group, and has a coarse-clastic sedimentary unit, the Kameeldoorns Formation, at the base. Three petrographically distinct porphyritic lava sequences overlie the Kameeldoorns Formation, namely the informal "Goedgenoeg formation", the Makwassie quartz-feldspar porphyries and the Rietgat Formation. Despite petrographic differences, the Goedgenoeg and Rietgat lavas are chemically indistinguishable and thus form a single magma-type. The Makwassie porphyries are dacitic in composition with a high proportion of feldspar and quartz phenocrysts. Rational variation trends are attributed to a nett loss of Si0₂ during secondary alteration. The porphyries are probably of crustal origin. The Goedgenoeg/Rietgat lavas display unusual chemistry and a broad, irrational compositional spectrum. They contain very high incompatible element levels, high nonnative quartz, as well as high MgO, M-values, Cr and Ni relative to the other tholeiitic andesites of the Witwatersrand triad. It is tentatively suggested that they are hybrid magmas containing both crust and mantle components, the former possibly represented by the Makwassie porphyries. Field evidence suggests that Platberg volcanism commenced directly after Klipriviersberg volcanism ceased, and was accompanied by a period of enhanced tectonic activity. The Platberg lavas thus probably reflect a crustal melting cycle associated with the Klipriviersberg magmatic event. The Allanridge lavas are the youngest rocks of the Witwatersrand triad. They are separated from the Platberg Group by a unit of flat-lying sediments, the Bothaville Formation, which was deposited after an extended period of peneplanation. The Allanridge lavas form a separate magma-type. They are tholeiitic andesites of similar composition to the Alberton lavas, but have higher incompatible element levels and are not consanguinous. The compositional similarities amongst the basic magma-types of the Witwatersrand triad suggests that all were generated in an hydrous mantle. Interelement ratio differences between the various magma-types nevertheless support the concept that the mantle was chemically heterogeneous during the early Proterozoic.

Les marges passives volcaniques, qui représentent plus des trois-quarts des marges passives sur Terre, sont les témoins privilégiés des processus d'extension lithosphérique menant à l'ouverture de nouveaux bassins océaniques. Nous explorons les relations structurales et temporelles qui existent entre le développement des grandes structures qui accommodent l'extension et l'amincissement, et la production magmatique qui lui est associée pendant le développement d'une marge volcanique naissante, accessible à l'observation directe : le point triple Afar en Éthiopie. Nous produisons une nouvelle lecture de la province Afar en tant qu'analogue en devenir des marges volcaniques. L'approche combine (1) une étude de terrain et de datation du volcanisme pour caractériser le timing de la déformation crustale et le style structural du rift pendant les phases les plus précoces, (2) la détermination géochimique de l'évolution des régimes de fusion mantellique au cours de l'extension, (3) la construction d'un modèle régional qui traite de l'évolution des marges volcaniques en lien avec leur segmentation. Nous mettons en évidence un style structural de " magmatic wide rift " en Afar, associé au jeu de grands détachements. Des phases tectoniques ponctuelles alternent avec des périodes de magmatisme plus prolongées. La segmentation précoce syn-rift contrôle le style structural, la mise en place du magma et l'asymétrie des marges. Le break-up correspond à l'amincissement et le remplacement de la croûte initiale par du matériel mafique pour former la première croûte océanique. / Volcanic passive margins, that represent more than the three quarters of continental margins worldwide, are privileged witnesses of the lithospheric extension processes that form new oceanic basins. We explore the structural and temporal relationships that exist between the development of the major thinning and stretching structures and the magmatic production associated to them. To do so, we will focus our work on the Afar triple junction, Ethiopia, a nascent volcanic passive margin. The rationale of this work is threefold. First, we present fieldwork analysis with lavas geochronology to determine the timing and style of the rift formation, since the early syn-rift period to present days. Second, we determine how the melting regime evolved in response to the deformation of the crust, through a geochemical study of the pre- to syn-rift lavas. Third, we present a synthetic regional that describes the evolution of the volcanic margins in relationship with their segmentation. Central Afar deformed as a magmatic wide rift, associated with major detachment faults. Punctual tectonic phases alternate with protracted magmatic periods. Early syn-rift segmentation controls the structural style, magma emplacement and asymmetry of the margins. The break-up is reached when the initial crust is thinned and replaced by mafic material to form the first oceanic crust.

State of the art thermal barrier coatings (TBCs) for gas turbine applications comprise (7 wt.%) yttria partially stabilized zirconia (7YSZ). 7YSZ offers a range of attractive functional properties – low thermal conductivity, high thermal expansion coefficient and high in-plane strain tolerance. However, as turbine entry temperatures are raised, the performance of 7YSZ coatings will be increasingly affected by sintering and environmental contamination, by calcia-magnesia-alumina-silica (CMAS) deposits. The effect of sintering-induced stiffening on the driving force for spallation of plasma-sprayed (PS) TBCs was investigated. Spallation lifetimes of TBC specimens sprayed onto alumina substrates were measured. A simple fracture mechanics approach was employed in order to deduce a value for the strain energy release rate. The critical strain energy release rate was found to be constant, and if this value had been known beforehand, then the rationale presented here could be used for prediction of coating lifetime. The effect of vermiculite (VM) and volcanic ash (VA) contamination on the sintering-induced spallation lifetime of PS TBCs was also investigated. The presence of both VM and VA was found to accelerate the rise in their Young’s modulus with sintering. Spallation results show that coating lifetime may be significantly reduced, even at relative low addition levels, due to the loss of strain tolerance caused by the penetration of glassy deposits. This result gives a clear insight into the role CMAS plays in destabilizing TBCs. Finally, the adhesion characteristics of ingested volcanic ash were studied using a small jet engine. The effects of engine speed and particle size were investigated. Deposition on turbine surfaces was assessed using a borescope. Deposition mainly occurred on the nozzle guide vane and blade platform. A numerical model was used to predict particle acceleration and heating in flight. It was observed that larger particles are more likely to adhere because they have greater inertia, and thus are more likely to impact surfaces. The temperature of the larger particles at the end of its flight was predicted to be below its softening point. However, since the component surface temperatures are expected to be hotter, adhesion of such particles is probable, by softening/melting straight after impact.

abstract: Volcanic eruptions can be serious geologic hazards, and have the potential to effect human life, infrastructure, and climate. Therefore, an understanding of the evolution and conditions of the magmas stored beneath volcanoes prior to their eruption is crucial for the ability to monitor such systems and develop effective hazard mitigation plans. This dissertation combines classic petrologic tools such as mineral chemistry and thermometry with novel techniques such as diffusion chronometry and statistical modeling in order to better understand the processes and timing associated with volcanic eruptions. By examining zoned crystals from the fallout ash of Yellowstone’s most recent supereruption, my work shows that the rejuvenation of magma has the ability to trigger a catastrophic supereruption at Yellowstone caldera in the years (decades at most) prior to eruption. This provides one of the first studies to thoroughly identify a specific eruption trigger of a past eruption using the crystal record. Additionally, through experimental investigation, I created a novel diffusion chronometer with application to determine magmatic timescales in silicic volcanic systems (i.e., rhyolite/dacite). My results show that Mg-in-sanidine diffusion operates simultaneously by both a fast and slow diffusion path suggesting that experimentally-derived diffusion chronometers may be more complex than previously thought. When applying Mg-in-sanidine chronometry to zoned sanidine from the same supereruption at Yellowstone, the timing between rejuvenation and eruption is further resolved to as short as five months, providing a greater understanding of the timing of supereruption triggers. Additionally, I developed a new statistical model to examine the controls on a single volcano’s distribution of eruptions through time, therefore the controls on the timing between successive eruptions, or repose time. When examining six Cascade volcanoes with variable distribution patterns through time, my model shows these distributions are not result of sampling bias, rather may represent geologic processes. There is a robust negative correlation between average repose time and average magma composition (i.e., SiO2), suggesting this may be a controlling factor of long-term repose time at Cascade volcanoes. Together, my work provides a better vision for forecasting models to mitigate potential destruction. / Dissertation/Thesis / Doctoral Dissertation Geological Sciences 2020