In recent years (Of late year)microelectronic technology significantly affected in the field of sensor technology, especially in the field of electrochemical sensors. This thesis deals with design and construction of thick-film voltammetric sensors array. The reason for proposal of voltammetric sensors array is to increase of speed, increase the accuracy and extension possibilities measurement compared with common systems.By reason of increase of sensitivity of these sensors it is efficient use the potentiostat chip for measurement output signal. Created sensors must fulfill the specified parameters and also requirements of thick-film technology. Next step is design the basic blocks of electronic circuit used to evaluate the measured values.

This master's thesis is concerned with the influence of aluminate ions added in various concentrations into the structure of nicel hydroxide that creates Ni-Cd accumulators positive electrode active mass basis nowadays. Nicel hydroxide occurs in two basic modifications ? and ß. Nowadays used ß modification reaches low capacity in comparison with ? modification. The disadvantage of ? modification is its instability and gradual degradation to ß modification. The aim of this diploma paper is to select the optimal amount of aluminate additives into the structure of nicel hydroxide with regard to electrochemical efficiency, stability, and degradation degree of the accumulated layer.

Master’s thesis is deals with the effect of carbon additives on the positive electrode in the NiCd batteries. It examines whether the positive electrode material enrichment of carbon additives to achieve improved internal parameters of conductivity and better contact with the electrode materials in a discharged. Galvanostatic cycling and electro-chemical impedance spectroscopy (EIS) are used for evaluation of graphite aditives.

Aim of this thesis is voltammetric study influence of liposomal platinum cytostatics on cancer cells. One of the goals is summarize available informations about influence of cisplatine on cancer cells, its encapsulation into liposome and affection of this cytostatic cisplatin encapsulated in liposome on cancer cell lines. In literary recherche is detail description of these issues. Than is there specification of voltammetric methods, which serve to electrochemical detection of cisplatin. Based on literary recherche was chosen the best method for detection and subsequently the method was optimalized and than was applied to measuring itself.

The aim of this work is the thick-film electrochemical sensor characterization. In the theoretical part, the thesis describes sensor, three-electrode system, characterization electrode using cyclic voltammetry and electrode pretreatment methods. The experimental part compares the results of cyclic voltammetry of bare carbon electrodes, chemically pre-treated electrodes, electrochemically pre-treated electrodes and electrodes modified by plasma oxidation.

Tetrathiafulvalene derivatives are remarkable molecules, with various application, reported relatively recently. The radical cation of these compounds has very inter- esting optical, electronic, electrocatalytic superconducting and magnetic properties that have been intensively studied recently. Quantitative in-situ EPR voltammetric spectroelectrochemistry studies of 2-(2-hydroxyethylsulfanyl)-3-(benzylsulfanyl)-6,7- bis(octadecylsulphanyl)tetrathiafulvalene (TTF-Der3) have been carried out with the aim to confirm the oxidation sites, follow-up reactions (after the first electron transfer), and electrochemical behaviour. The diffusion process was confirmed by the depen- dence of current on the square root of the scan rate. It was claimed that the ratio of the number of generated radicals to transferred charge (electrons) for two representative TTF derivatives was determined to 5.5:500 for and 7:500 for TTF, indicating the follow- up reactions. Experiments were performed using the commercially available EPR standards, calibrated for this method (experimental setup). The latter was validated by quantitative EPR with standard 4-hydroxy-2,2,6,6-tetramethylpiperidin-1-oxyl radical concentration (1·10−4 mol dm−3). For the ratios the confidence interval was reported for the first time for TTF-Der3 it was...

The aim of this thesis was the development of a voltammetric method for the determination of 7-dehydrocholesterol as a biomarker of congenital disease Smith-Lemli-Opitz syndrome. The concentration of 7-dehydrocholesterol in plasma will increase hundred-fold to hundreds to thousands µmol L-1 in patients suffering from Smith-Lemli-Opitz syndrome. The determination of 7-dehydrocholesterol was carried out in artifical serum in this work, which was prepared to mimic the conditions of postnatal diagnosis of Smith-Lemli-Opitz syndrome. 7-dehydrocholestrol provides a well developed voltammetric signal at approximately +0.8 V vs. Ag/AgNO3 in acetonitrile. Differential pulse voltammetry with optimized parameters was used for the determination of 7-dehydrocholesterol. The presence of protein in artificial serum (human serum albumin) resulted in an unacceptably high detection limit of the method (178 µmol L-1 in artificial serum). Therefore, human serum albumin was eliminated from the artificial serum samples by precipitating it with acetonitrile and subsequently centrifuging the resulting suspension. At the same time, the ratio of aqueous and organic components in the studied medium was also adjusted with acetonitrile to achieve an optimal voltammetric response of 7-dehydrocholestrol. With regard to the...

Bile acids are the end products of cholesterol metabolism and are important biological surfactants. The curved shape of their chains allows the cyclization of molecules, and the formation of a supramolecular structure. The goal of this thesis was to study the electrochemical and adsorption behavior of selected bile acids: lithocholic, deoxycholic and cholic acids. The measurements were carried out in the medium Brittonův-Robinson buffer:methanol in the ratio 9:1 using cyclic voltammetry and AC voltammetry methods and measuring the dependence of the differential capacitance Cd on the applied potential E. A hanging mercury drop electrode was used as a working electrode. The measurements showed that bile acids are adsorbed on the surface of the electrode and organizing themselves in self assembled monolayers (SAM). In our case we have observed formation of 2D condensed layers as specific form of SAM. Transfer techniques were used to demonstrate bile acid adsorption. A study of the behavior of lithocholic acid as a function of different pH values showed that only at pH 10.0 to 12.0 2D 2D condensation occurs, i. e. that at pH values in the range of 2.0 to 9.0 it is another type of adsorption. On AC voltammograms, there are a maximum of two areas in which peaks occur: the first is around -0.2 V and the...

This thesis is devoted to the study of electrochemical oxidation of meta-substituted phenolic substances on a boron-doped diamond electrode. In the first phase, it was studied the effect of pH on their electrochemical oxidation by the methods of classical "direct current" voltammetry (DCV) and differential pulse voltammetry (DPV). The study was performed on three types of boron doped diamond (BDD) surfaces: polished, anodic and cathodically activated. In the second phase, attention was paid to the Hammett correlation to study the effect of the substituent on the potential of electrochemical oxidation of selected phenolic compounds. Among the substituents studied were (-H, -CH3, -OCH3, -(CH2)2COOH, -COOH a -NO2). In general, the oxidation potentials were lower in the basic medium than in the acidic medium on all studied surfaces. An exception was the studied phenolic acids, which could not be detected in an alkaline medium on the O-terminated BDD, probably due to electrostatic repulsion between the partially negative electrode surface and the acid dianion. The highest correlation coefficient for the dependence composed of all studied phenols was obtained for the polished and H-terminated surface at pH 11, ie the dissociated form of phenolic substances. The high electron density leads to easy...

This master's thesis contains a study of electrochemical processes of selected bile acids possessing 7 hydroxyl group (cholic, chenodeoxycholic and −muricholic). The measurements were performed on boron−doped diamond electrode in the non-aqueous medium of acetonitrile and perchloric acid (water content 0.55 %) by cyclic voltammetry. It is known that the electrochemical activity of 7 bile acids is increased by a dehydration reaction between perchloric acid and the 7 bile acid. The subject of the study was the stability of the voltammetric response of chemically activated bile acids in the region of negative potentials. It was found that the presence of oxygen in the measured solution is an important factor for obtaining the cathodic signal of 7 bile acids. It probably performs a regenerative function; the product of the electrochemical reduction is re-oxidized in its presence, which leads to an increase in the voltammetric response. At the same time, it is important that the direction of the scan in cyclic voltammetry first proceeds to positive values. A potential of +2.0 V (vs. Ag/AgNO3 in acetonitrile) must be reached for the HO● radicals to be formed. It is these radicals that presumably lead to the formation of the product(s) of bile acids electrochemical oxidation that can be subsequently...