Cholesterol is an irreplaceable sterol found in animal cells, lathosterol is one of its precursors. The first aim of this Thesis is to develop a method for determining cholesterol after liquid- liquid extraction from milk matrices by differential pulse voltammetry on a boron doped diamond electrode in the presence of perchloric acid in acetonitrile where cholesterol provides an irreversible anodic response at the potential between +1300 and +1600 mV depending on the water content. The second aim is a study of the voltammetric behavior of lathosterol on boron doped diamond and glassy carbon electrodes using cyclic voltammetry and differential pulse voltammetry mainly in perchloric acid but also sodium perchlorate where lathosterol provides an irreversible anodic response at the potential of about +1650 mV on the boron doped diamond electrode and at the potential of +1350 mV on a glassy carbon electrode. The effect of other acids - sulfuric, nitric and phosphoric - on the response of lathosterol was also investigated. The influence of the water content in the measured solution and the influence of the polarization rate on the response of lathosterol were studied. Furthermore, the calibration dependence of lathosterol was measured using differential pulse voltammetry after optimization of its...

The aim of presented Diploma Thesis was to study an electrochemical behavior of nitroimidazole drugs metronidazole and ornidazole and to find optimal conditions for their voltammetric determination at a mercury meniscus modified silver solid amalgam electrode using DC voltammetry (DCV) and differential pulse voltammetry (DPV). Voltammetric behavior of selected drugs was investigated in dependence on the pH of the medium used (realized using a Britton-Robinson buffer (BR buffer)) and a mechanism of the reduction of both drugs was investigated using cyclic voltammetry (CV). The optimum medium for voltammetric determination of studied nitroimidazole drugs at the m-AgSAE in a region of cathodic potentials was found to be the BR buffer of pH 8.0. Then, the concentration dependences were measured in this optimum medium in the concentration range from 2·10-7 mol/L to 1·10-4 mol/L. The limits of quantification (LQs) for both metronidazole and ornidazole were found in the concentration order of 10-7 mol/L by using DCV and DPV at the m-AgSAE. The applicability of the newly developed voltammetric methods of the determination of nitroimidazole drugs was verified on the model samples of drinking and river water, with LQ ≈ 2·10-7 mol/L for both DC voltammetry and differential pulse voltammetry at the m-AgSAE....

Presented Diploma Thesis is focused on electroanalytical determination of the herbicide Aclonifen, which belongs to a group of herbicides derived from diphenylether. These herbicides are used due to their effects - inhibition of protoporfyrinogen oxidase synthesis and also inhibition of biosynthesis of carotenoids. Due to its widespread use in agricultural, toxical effects on humans and because of its negative impacts particularly on aquatic ecosystems there is a need for methods capable of determining the presence of Aclonifen in the environment to monitor its ecological impacts. Optimal conditions for the determination of Aclonifen have been investigated in BR buffer - methanolic solution and in BR buffer. Electrochemical behavior of the substance has been studied using direct current voltammetry (DCV), differential pulse voltammetry (DPP) and adsorptive stripping voltammetry (AdSV) on the hanging mercury drop electrode (HMDE) and by using TAST polarography and differential pulse polarography (DPP) on the dropping mercury electrode (DME). UV/VIS spectrophotometric detection was used for comparison to electrochemical detection. Used wavelengths were 308 nm and 388 nm. For electrochemical determination of Aclonifen the above mentioned techniques were used and following results were obtained: DCV...

The master thesis present the possibilities of processing of electrochemical data from a group of four electrodes with non-selective response (simple sensor array) for electrochemical analysis with potential application of the results achieved in the construction of the sensor field type "electronic tongue". This simple system was applied to the sample simulating the food product. Electrochemical data were processed through mathematical operations such as Gaussian approximation, deconvolution or using basic mathematical operations.

Antimony film electrode was studied for the use in a voltammetric analysis of organic compounds. The substance chosen as an analyte was trifluralin, which is used as a pesticide. The comparison of different substrate electrodes was carried out between five electrodes, which were gold, silver, copper, polished amalgam and glassy carbon electrode (GCE). Best performance was observed on antimony film glassy carbon electrode (SbFGCE). It provided higher sensitivity and lower limit of quantification in comparison with bare GCE. The antimony film was stable and it provided good reproducibility (RSD = 5.2 %). Parameters of an electrochemical preparation of SbFGCE were optimized. Conditions for determination of concentration of trifluralin were optimized on newly prepared SbFGCE. The best conditions were in a solution of methanol and 0.1 M hydrochloric acid in 1:1 ratio measured by differential pulse voltammetry. The limit of quantification was determined as 1.2·10-6 mol·l-1 . A direct voltammetric measurement on SbFGCE was carried out in a model river sample. Lower limits of quantification were achieved with solid phase extraction (SPE). Recovery values were 86 ± 8 % in deionized water with a preconcentration factor of 125. The limit of quantification was lowered to value 1.1·10-8 mol·l-1 . The extraction...

The electrochemic's behaviour of the bile acids (cholic, glycocholic, deoxycholic, ursodeoxycholic and lithocholic acid) was studied on the meniscus-modified silver solid amalgam electrode (m-AgSAE) by differential pulse voltammery. Bile acids provide in the solution of the Britton - Robinson buffer and methanol (9:1) in the pH range 3.0 to 12.0 a cathodal signal in the high negative potentials: cholic acid, deoxycholic acid, ursodeoxycholic acid and lithocholic acid about −1400 mV and glycocholic acid, which alone is the conjugate with glycine, about −1500 mV. Cholic acid, glycocholic acid, deoxycholic acid and ursodeoxycholic acid provide the highest peaks to pH 5.0, approximately in their pKa values. Lithocholic acid provides peaks from pH 7.0. It was demonstrated by the cyclic voltammetry that the electrochemical behavior is influenced by the adsorption of the bile acids to the electrode; presumed reaction at the working electrode - a reduction of a proton of a carboxylic group, is controlled by the diffusion and the process is quasireversible. Utilization of the electrochemical reduction of bile acids for the voltammetric determination does not seem very suitable. It has been proven that the presence of the methanol deteriorates the measuring results for glycocholic acid. In the presence of...

This work studies various electrical properties of polymer layers of polyaniline, polythiophenes and poly(((benzothiadiazol)4,7-di(thien-2-yl)-5,6-difluoro-2,1,3-benzothiadiazol). Goal of this work is to determine electrical and photoelectrical properties as are electric conductivity, mobility of the free charge carriers, work function of the electrons and diffusion length of excitons. Conductivity was obtained through current and voltage contacts, mobility was measured by CELIV method (charge extraction by linearly increasing voltage). To determine work function a Kelvin probe was built and utilized. Diffusion length of excitons was determined from photovoltage spectrum formed by illuminating space charge region of the polymer.Space charge region on surface of the polymer can arise spontaneously or by laying suitable contact electrode. Powered by TCPDF (www.tcpdf.org)

The thesis deals with a study of the various carbon materials for negative electrode of lithium ion accumulators. The object of the work is to gain the most knowledge about these materials and to project their possible improvements. In the first part of the work is described the latest knowledge about carbon materials and their application. In the following parts of the work is handled about manufacture,optimization of composition of electrode and the choice of carbon material for liquid and gel electrolyte.

The aim of this Thesis is development of electroanalytical methods for determination of cholesterol and 7-dehydrocholesterol on boron doped diamond electrodes based on electrochemical oxidation of products of acid-induced dehydration reaction. Two approches have been applied, relying on their detection in 0,1 mol.l-1 perchloric acid in acetonitril containing variable water content 0,43 % - 40 %. Cyclic voltammetry revealed substantial difference in oxidation peak pontecials for 7-dehydrocholesterol (+850 mV) and cholesterol (+1500 mV) in 0,1 mol.l-1 perchloric acid in acetonitrile containing 5 % of water. The limit of detection using differential pulse voltammetry were 6,19 µmol.l-1 a 19,2 µmol.l-1 for a mixture of 7-dehydrocholesterol and cholesterol, respectively. For flow injection analysis with amperometric detection (FIA-AD) the water content in run buffer, detection potencial and the distance between the capillary outlet and electrode surface in wall-jet arrangement of amerometric flow-through detection cell were optimized. Achieved detection limits are in range of 0,61 - 3,43 µmol.l-1 depending on the detection potencial and water concent in the run buffer. The developed FIA-AD method was used for determination of a model mixture solution of 7- dehydrocholesterol and cholesterol. Key words...

This thesis deals with the study of electrochemical behaviour of dehydrocholic and chenodeoxycholic acid at stationary mercury-based electrodes - hanging mercury dropping electrode and silver solid amalgam electrode modified by a mercury meniscus. This is the first study of electrochemical behaviour of dehydrocholic acid which offers tree peaks with potentials around -1270 mV, -1450 mV and -1800 mV. The last one with the potential -1800 mV is probably the main peak given by reduction of carboxylic group of side chain of steroid skeleton. By cyclic voltammetry was determined that the process is quasireversible and is strongly influenced by adsorption of DHCA on the electrode surface and also by the pH which determines dissociation degree of carboxylic group. In the environment of BR buffer (pH 7.0) - methanol (9:1) was measured concentration dependence by DC, DP and "square-wave" voltammetry. By neither one of these methods have been reached satisfying limits of detection and wide linear dynamic ranges. However, the repeatable signals in wide range of pH can be used for electrochemical characterization of DHCA. CDCA offers in environment 0,04 mol·l-1 borat buffer (pH 9.1) - methanol (9:1) one signal with potential around -1350 mV. Position of this peak on the potential axe and also its height are...