This dissertation presents research performed in the areas of radio wave propagation measurement and modeling, smart antenna arrays, and software-defined radio development. A four-channel, wideband, software-defined receiver was developed to serve as a test bed for wideband measurements and antenna array experiments. This receiver was used to perform vector channel measurements in terrestrial and air-to-ground environments using an antenna array. ent results served as input to radio channel simulations based on three geometric channel models. The simulation results were compared to measurement results to evaluate the performance of the radio channel models under test. Criteria for evaluation include RMS delay spread, excess delay spread, signal envelope fading, antenna diversity gain, and gain achieved through the use of a two-dimensional rake receiver. This research makes contributions to the wireless communications field through analysis, development, measurement, and simulation that builds upon past theoretical and experimental results. Contributions include a software-defined radio architecture, based on object oriented techniques, that has been developed and successfully demonstrated using the wideband receiver. This research has produced new wideband vector channel measurements to provide extensive characterization results facilitating simulation of emerging wireless technology for commercial and military communications systems. Original ways of interpreting multipath component strength and correlation for antenna arrays have been developed and investigated. A novel geometric air-to-ground ellipsoidal channel model has been developed, simulated, and evaluated. Other contributions include an evaluation of two popular radio channel models, a geometric channel simulator for producing channel impulse responses, and analytical derivation results related to channel modeling geometries and multipath channel measurement processing. In addition to new results, existing theory and earlier research results are discussed. Fundamental theory for antenna arrays, vector channels, multipath characterization, and channel modeling is presented. Contemporary issues in software radio and object orientation are described, and measurement results from other propagation research are summarized. / Ph. D.

The proliferation of wireless ad-hoc networks especially wireless LAN (IEEE 802.11b Standard) in the commercial market in recent years has reached a critical mass. The adoption and strong support of wireless IEEE 802.11 standard, coupled with the consequent decline in costs, has made wireless LAN deployment as one of the fastest growth area in communication access technology. With the ever increasing use of wireless LAN technology the various networks are reaching their full capacity in terms of network throughput, number of users and interference level in the wireless channel. In this thesis work I propose to the use smart antenna technology and a power management scheme in the wireless ad-hoc networks to increase the network capacity in terms of throughput, number of simultaneous communication and to lower the average transmit power and consequently co-channel interference. Power management scheme can be used to maximize the power efficiency of the transmitter by choosing an optimum transmit power level. Smart antenna or adaptive antenna array technology has reached a level of sophistication that it is feasible to use it on small mobile terminals like handheld PDA, LAPTOP and other mobile devices with limited battery power. The simulation results of various ad-hoc network scenario shows that there are significant gains to be had if these technologies can be integrated in the existing wireless LAN physical layer and/or in the standard them self. Smart antennas along with slight modification in channel access scheme reduce co-channel interference dramatically and increases the number of simultaneous transmissions hence improves network throughput. Power management algorithm is shown to improve average transmission of a node. We present a mathematical framework to characterize the outage probability of cellular mobile radio system with selective co-channel interference receiver in overloaded array environments. The mathematical framework outlines a general numerical procedure for computing the probability of outage of a cellular mobile radio system that is equipped with a smart antenna to suppress a few strongest co-channel interferers (CCI) out of a total of NI active interferers by null steering. / Master of Science

Los sistemas de comunicaciones con múltiples antenas o sistemas MIMO (multiple-input multiple-output) se presentan como una de las tecnologías más prometedoras en el campo de las comunicaciones inalámbricas, ya que permiten aprovechar la dimensión espacial además de las dimensiones de frecuencia y tiempo. De esta forma, se pueden obtener tasas de transmisión más elevadas usando el mismo ancho de banda, que es un recurso escaso, y manteniendo una potencia de transmisión baja, lo cual es crucial para dispositivos alimentados por baterías. Por estas razones, la tecnología MIMO ha sido adoptada en muchos estándares como Long-Term Evolution (LTE), LTE Advanced y Worldwide Interoperability for Microwave Access (WiMAX). Las técnicas MIMO también pueden se pueden emplear en un escenario multiusuario, donde varios usuarios comparten la dimensión espacial provocando una interferencia multiusuario. A través de la precodificación y del uso de múltiples antenas en el transmisor, la señal de los diferentes usuarios puede ser multiplexada espacialmente de forma que se mitigue la interferencia multiusuario incluso con usuarios de una sola antena. Estos sistemas, conocidos como sistemas MU-MISO (multiuser multiple-input single-output), han atraído mucho la atención en los últimos años ya que permiten el desarrollo de terminales pequeños y baratos, manteniendo así el equipamiento más caro en el transmisor. Sin embargo, estos beneficios conllevan un sistema más complejo. Por una parte, el multiplexado espacial requiere una carga de procesado considerable, que depende del tamaño del sistema: número de antenas transmisoras, número de receptores y ancho de banda. Por otra parte, las técnicas MIMO requieren un conocimiento del canal en transmisión o CSIT (channel state information at the transmitter) preciso. En sistemas con duplexación por división en frecuencia o FDD (frequency-division duplex), la información de canal o CSI (channel state information) debe ser estimada en el receptor y proporcionada al transmisor a través del enlace de realimentación, reduciendo así la eficiencia del sistema. Por lo tanto, esta tesis se centra en la mejora de la eficiencia de las implementaciones de precodificación y en el rendimiento de los esquemas de realimentación de canal en sistemas MU-MISO. El problema de la precodificación se aborda en primer lugar. Se ha llevado a cabo un análisis de algunas de las técnicas de precodificación más usadas, prestando especial atención a su rendimiento y a su complejidad. Este análisis revela que aquellas técnicas que hacen uso de lattice reduction (LR) obtienen un mejor rendimiento. Sin embargo, la complejidad computacional de la técnica LR dificulta su implementación en la práctica. El análisis también revela que las técnicas zero-forcing (ZF), Tomlinson-Harashima precoding (THP) y LR-THP son las técnicas más adecuadas para cubrir todo el rango de rendimiento y complejidad computacional. Asimismo, se ha llevado a cabo un análisis de estas técnicas bajo CSIT imperfecto. Dicho análisis ha demostrado que LR es una técnica muy importante también para el caso de CSIT imperfecto. A continuación, se han presentado implementaciones paralelas de técnicas de precodificación sobre unidades de procesamiento gráfico o GPUs (graphic processing unit), comparándose con implementaciones en unidades de procesamiento central o CPU (central processing unit). Dado que las implementaciones de THP y LR-THP han demostrado ser las que mejor se adaptan a la arquitectura de la GPU y ya que tienen muchas operaciones comunes, se ha propuesto una implementación sobre GPU de un esquema THP reconfigurable combinado con LR. La reconfigurabilidad de las GPUs permite desactivar la etapa de LR cuando los requisitos de los usuarios están garantizados por el esquema THP, combinando complejidad computacional con rendimiento. Aunque esta implementación consigue una mejora significativa respecto a la implementación sobre CPU, su paralelismo viene limitado por la naturaleza secuencial del problema LR. Por ello, se han propuesto varias estrategias para la paralelización del problema LR que han sido evaluadas en distintas plataformas: CPU multi-núcleo, GPU y plataforma heterogénea que consiste en CPU+GPU. Los resultados revelan que la arquitectura GPU permite reducir considerablemente el tiempo de computación del problema LR, especialmente en la plataforma heterogénea. La segunda parte de la tesis trata el problema de la realimentación de canal en sistemas FDD. En estos sistemas, los receptores normalmente proporcionan una versión cuantificada del canal a través del canal de realimentación. Con el objetivo de mantener una eficiencia alta, el canal debe ser cuantificado con los mínimos bits posibles. En primer lugar, se explora el uso de la correlación en frecuencia para reducir el volumen de información de realimentación. Se han presentado dos esquemas diferentes basados en cuantificación vectorial o VQ (vector quantization) y en la transformación Karhunen-Loève, respectivamente, y se han comparado con esquemas existentes en términos de rendimiento y complejidad computacional. Los resultados muestran que ambas técnicas son capaces de reducir significativamente el volumen de información de realimentación aprovechando la correlación en frecuencia. Finalmente, la correlación espacial también se aprovecha para reducir la información de realimentación. Se ha presentado una caracterización espacial estadística del modelo de canal SCM (spatial channel model) del 3GPP (3rd Generation Partnership Project) para un entorno de alta correlación. Basado en esta caracterización, se propone un esquema de cuantificación de canal para entornos de alta correlación. Con el objetivo de obtener una caracterización para alta y baja correlación, se considera un modelo de correlación más sencillo como el modelo de Kronecker. Basado en esta caracterización, se proponen dos esquemas de cuantificación y se evalúan con un modelo de canal realista como el SCM. Los resultados muestran que ambos esquemas son capaces de reducir la información de realimentación en ambientes con correlación alta y moderada. / Multiple-input multiple-output (MIMO) communication systems have emerged as one of the most promising technologies in the field of wireless communications, allowing to exploit the spatial dimension as well as the time and frequency dimensions. Thus, higher rates can be obtained by using the same bandwidth, which is a scarce resource, and keeping a low transmit power, which is crucial in battery-operated devices. For these reasons, MIMO technologies have been adopted by many standards such as Long-Term Evolution (LTE), LTE advanced (LTE-A) and Worldwide Interoperability for Microwave Access (WiMAX). MIMO techniques can also be used in a multiuser scenario, where several usersshare the spatial dimension causing multiuser interference. By means of precoding and the use of multiple antennas at the transmitter, the signal of the different users can be spatially multiplexed so that multiuser interference is mitigated even for single-antenna users. These systems, known as multiuser multiple-input singular-output (MU-MISO) systems, have attracted much attention in recent years since they allow the development of small and inexpensive terminals, keeping the most expensive hardware at the transmitter. However, these benefits come at the cost of having a more complex system. On the one hand, spatial multiplexing requires a considerable processing load that depends on the size of the system: number of transmit antennas, number of receivers and bandwidth. On the other hand, MIMO techniques require accurate channel state information at the transmitter (CSIT). In frequency-division duplex (FDD) systems, channel state information (CSI) has to be estimated at the receiver and provided to the transmitter through the feedback link, hence reducing the efficiency of the system. Therefore, this thesis is primarily focused on improving the efficiency of precoding implementations and the performance of feedback schemes in MU-MISO systems. First, the problem of precoding is addressed. An analysis of some of the most utilized precoding techniques is conducted, paying special attention to their performance and computational complexity. The analysis reveals that those techniques that make use of lattice reduction (LR) achieve the best performance. However, the computational complexity of LR makes its implementation difficult for practical systems. The analysis reveals that zero-forcing (ZF), Tomlinson-Harashima precoding (THP) and lattice reduction Tomlinson-Harashima precoding (LR-THP) are the most suitable techniques for covering the entire range of performance and computational complexity. An analysis of these techniques with imperfect CSIT has also been performed. In this analysis, LR has proven to be a key technique also when imperfect CSIT is available. Next, parallel implementations of the precoding techniques on a graphic processing unit (GPU) are presented and compared to implementations that use a central processing unit (CPU). Since the implementations of THP and LR-THP have shown to best fit the GPU architecture and since they also share many operations, a GPU implementation of a reconfigurable THP scheme combined with LR has been proposed. The reconfigurable nature of GPUs allows gating the LR stage off when the user requirements are sufficiently guaranteed by the THP scheme, trading computational cost and performance. Although this implementation achieves a significant speed-up compared to its CPU implementation, its parallelism is limited by the sequential nature of LR. Therefore, several strategies for the parallelization of the LR problem are proposed and evaluated on different platforms: multicore CPU, GPU and a heterogeneous platform consisting of CPU+GPU. Results reveal that a GPU architecture allows a considerable reduction of the computational time of the LR problem, especially in the heterogeneous platform. The second part of this thesis addresses the problem of feedback in FDD systems. In these systems, a quantized version of the channel is usually provided by the receivers through the feedback link. In order to keep a high efficiency, the channel must be quantized using as few bits as possible. First, the use of the frequency correlation to reduce the feedback information is explored. Two different schemes based on vector quantization (VQ) and the Karhunen-Loève (KL) transform, respectively, are presented and compared with existing schemes in terms of performance and complexity. Results show that both techniques are able to significantly reduce the feedback overhead by taking advantage of the frequency correlation. Finally, the spatial correlation is leveraged to reduce the feedback information. A spatial statistical characterization of the spatial channel model (SCM) from the 3rd Generation Partnership Project (3GPP) for a highly correlated environment is presented. Based on this characterization, a channel quantization scheme for highly correlated environments is proposed. In order to obtain a statistical characterization for both high and low correlations, a simpler model such as the Kronecker correlation model is considered. Based on this characterization, two quantization schemes have been presented and evaluated using a realistic channel model such as the SCM. Results show that both schemes are able to reduce the feedback overhead in highly and moderately correlated scenarios. / Domene Oltra, F. (2015). Evaluation of precoding and feedback quantization schemes for multiuser communications systems [Tesis doctoral]. Editorial Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/46971

Dynamic spectrum access (DSA) wireless networks focus on using RF spectrum more efficiently and dynamically. Significant progress has been made during the past few years. For example, many measurements of current spectrum utilization are available. Theoretical analyses and computational simulations of DSA networks also abound. In sharp contrast, few network systems, particularly those with a decentralized structure, have been built even at a small scale to investigate the performance, behavior, and dynamics of DSA networks under different scenarios. This dissertation provides the theory, design, and implementation of a software radio-based decentralized DSA network prototype, and its enabling technologies: software radio, signal detection and classification, and distributed cooperative spectrum sensing. By moving physical layer functions into the software domain, software radio offers an unprecedented level of flexibility in radio development and operation, which can facilitate research and development of cognitive radio (CR) and DSA networks. However, state-of-the-art software radio systems still have serious performance limitations. Therefore, a performance study of software radio is needed before applying it in any development. This dissertation investigates three practical issues governing software radio performance that are critical in DSA network development: RF front end nonlinearity, dynamic computing resource allocation, and execution latency. It provides detailed explanations and quantitative results on SDR performance. Signal detection is the most popular method used in DSA networks to guarantee non-interference to primary users. Quickly and accurately detecting signals under all possible conditions is challenging. The cyclostationary feature detection method is attractive for detecting primary users because of its ability to distinguish between modulated signals, interference, and noise at a low signal-to-noise ratio (SNR). However, a key issue of cyclostationary signal analysis is the high computational cost. To tackle this challenge, parallel computing is applied to develop a cyclostationary feature based signal detection method. This dissertation presents the method's performance on multiple signal types in noisy and multi-path fading environments. Distributed cooperative spectrum sensing is widely endorsed to monitor the radio environment so as to guarantee non-interference to incumbent users even at a low SNR and under hostile conditions like shadowing, fading, interference, and multi-path. However, such networks impose strict performance requirements on data latency and reliability. Delayed or faulty data may cause secondary users to interfere with incumbent users because secondary users could not be informed quickly or reliably. To support such network performance, this dissertation presents a set of data process and management schemes in both sensors and data fusion nodes. Further, a distributed cooperative sensor network is built from multiple sensors; together, the network compiles a coherent semantic radio environment map for DSA networks to exploit available frequencies opportunistically. Finally, this dissertation presents the complete design of a decentralized and asynchronous DSA network across the PHY layer, MAC layer, network layer, and application layer. A ten-node prototype is built based on software radio technologies, signal detection and classification methods, distributed cooperative spectrum sensing systems, dynamic wireless protocols, and a multi-channel allocation algorithm. Systematic experiments are carried out to identify several performance determining factors for decentralized DSA networks. / Ph. D.

Yes / This is the eighth workshop to be organised under the postgraduate programmes in electrical and electronic engineering (EEE). The workshop concludes the Research Seminar Series, which has provided a platform for disseminating the latest research activities in related technologies through its weekly seminars. The EEE courses cover a broad range of technologies and this is reflected in the variety of topics presented during the workshop. In total, thirty-three papers have been selected for the proceedings, which have been divided into seven sections. The workshop aims to be as close to a `real¿ event as possible. Hence, authors have responded to a Call for Papers with an abstract, prior to the submission of the final paper. This has been a novel experience for many, if not all of the contributors. Clearly, authors have taken up the challenge with enthusiasm, resulting in what promises to be an interesting and informative workshop.

Emerging technologies such as wireless local area networks and cellular telephones have dramatically increased the use of wireless communications services within the last 10 years. The shortage of available spectrum exists due to increasing demand for wireless services and current spectrum allocation regulations. To alleviate this shortage, Research aims to improve spectral efficiency and to allow spectrum sharing between separately managed and non-coordinating communications systems. This thesis explores the feasibility of spectrum sharing between airborne weather radar and wireless local area networks at 9.3 GHz – 9.5 GHz. Characteristics of flight paths of aircraft using airborne weather radar and the low duty cycle of radar transmissions offer unique opportunities for spectrum sharing. But it was found that the extremely sensitive receivers provide challenges for designing a communications system meant for widespread use. The probability of causing harmful interference to airborne weather radar is too great for most types of wireless local area networks, but a direct sequence spread spectrum scheme could share spectrum with airborne weather radar. Bit errors in wireless local area network links caused by airborne weather radar interference do not significantly decrease the performance of the wireless local area network system. The distribution of interference outside of the airborne weather radar receiver by using direct sequence spread spectrum combined with the acceptable bit error rates indicate that while spectrum sharing between airborne weather radar and wireless local area network at 9.3 GHz – 9.5 GHz is not feasible, direct sequence spread spectrum systems can share spectrum with airborne weather radars under more limited assumptions. / Master of Science

Yes / This is the ninth workshop to be organised under the postgraduate programmes in electrical and electronic engineering (EEE). The workshop concludes the Research Seminar Series, which has provided a platform for disseminating the latest research activities in related technologies through its weekly seminars. The EEE courses cover a broad range of technologies and this is reflected in the variety of topics presented during the workshop. In total, forty-four papers have been selected for the proceedings, which have been divided into eight sections. The workshop aims to be as close to a `real¿ event as possible. Hence, authors have responded to a Call for Papers with an abstract, prior to the submission of the final paper. This has been a novel experience for many, if not all of the contributors. As usual, authors have taken up the challenge with enthusiasm, resulting in a collection of papers that reflects today¿s research challenges. / School of Engineering, Design and Technology

[ES] La red de sexta generación (6G) es la solución potencial para satisfacer los requisitos exponencialmente crecientes de los servicios y aplicaciones emergentes. La plataforma 6G espera ofrecer altas velocidades de datos, conectividad ultra alta y baja latencia en función de los indicadores clave de rendimiento (KPI) requeridos. La tecnología de comunicación por luz visible (VLC) representa una tecnología clave para la red 6G, pero requiere una técnica de modulación avanzada eficiente para cumplir con dichos requisitos. En las últimas décadas, las señales ópticas basadas en el esquema de multiplexación por división de frecuencia ortogonal (OFDM) han atraído mucha atención y se han convertido en la modulación más popular entre varios esquemas de acceso multiportadora, gracias a su robustez y simplicidad frente a la cancelación por trayectos múltiples utilizando el prefijo cíclico (CP). Una de las formas de onda más prometedoras para redes de próxima generación es la técnica de modulación Filter Bank MultiCarrier (FBMC). El principal beneficio del esquema FBMC es que no depende de CP y de un gran número de muestras de banda de guarda, por lo tanto, emplea varias funciones de pulso localizadas en el tiempo con una alta relación de supresión de lóbulos laterales, lo que permite mejorar la eficiencia espectral y el rendimiento del sistema como factores clave en las redes ópticas de próxima generación, y proporciona una buena alternativa a la técnica CP-OFDM. Esta Tesis pretende dar un paso adelante en la propuesta de formatos de modulación para ser utilizados en sistemas VLC como tecnología habilitadora en redes 6G. Por lo tanto, se propone el sistema Flip-FBMC con un algoritmo de truncamiento para ofrecer una transmisión de alta velocidad con baja latencia Flip-FBMC mediante el uso del algoritmo de transformación ortogonal isotrópica (IOTA) y la capa PHYsical para DYnamic AccesS y filtros de radio cognitiva (PHYDYAS). En esta Tesis se propone la ecualización multitap con el fin de mitigar la Interferencia imaginaria intrínseca (IMI) en un canal con perfiles de retardos elevado en sistemas VLC de interiores. Además, se ha mejorado rendimiento de error de las señales FBMC no coherentes mediante el análisis de la propiedad de la localización de tiempo-frecuencia con la función gaussiana extendida (EGF), donde el factor de dispersión desempeña un papel crucial en la determinación del equilibrio entre las características espectrales y la reconstrucción óptima de la calidad de la señal. Además, la Tesis proporciona el primer análisis teórico que informa de la degradación en la estimación para varios factores de clipping basada en el impacto del nivel de interferencia imaginario fuera de la zona de primer orden que no puede ser estimada mediante el preámbulo de IAM. Sin embargo, se debe enfatizar en el valor de la técnica Flip-FBMC/IAM para proporcionar el modelo unipolar en comparación con el uso del formato FBMC óptico polarizado con corriente continua (DCO-FBMC) que sufre una reducción en la estimación de la precisión. Por lo tanto, se ha demostrado el descenso del rendimiento con el sistema DCO-FBMC debido al IMI inducido fuera de los símbolos de orden cero, y que es más evidente cuando se requieren niveles bajos de corriente DC. Desde esta perspectiva, la técnica de repetición de tramas con señales Flip-FBMC ha demostrado ser una solución importante para minimizar la interferencia inducida. Por lo tanto, en esta Tesis, la modulación Flip-FBMC con repetición de tramas y perfil de filtro PHYDYAS se propone como un candidato viable para hacer frente al rango dinámico restringido del LED, en comparación con el rendimiento de los sistemas Flip-CP-OFDM y Flip-FBMC/IAM en futuras redes 6G basadas en acceso VLC. / [CA] La xarxa de sexta generació (6G) és la solució potencial per a satisfer els requisits exponencialment creixents dels servicis i aplicacions emergents. La plataforma 6G espera oferir altes velocitats de dades, connectivitat ultra alta i baixa latència en funció dels indicadors clau de rendiment (KPI) requerits. La tecnologia de comunicació per llum visible (VLC) representa una tecnologia clau per a la xarxa 6G, però requerix una tècnica de modulació avançada eficient per a complir amb estos requisits. En les últimes dècades, els senyals òptics basats en l'esquema de multiplexació per divisió de freqüència ortogonal (OFDM) han atret molta atenció i s'han convertit en la modulació més popular entre diversos esquemes d'accés multiportadora, gràcies a la seua robustesa i simplicitat enfront de la cancel·lació per trajectes múltiples utilitzant el prefix cíclic (CP). Una de les formes d'ona més prometedores per a xarxes de pròxima generació és la tècnica de modulació Filter Bank MultiCarrier (FBMC). El principal benefici de l'esquema FBMC és que no depén de CP i d'un gran nombre de mostres de banda de guarda, per tant, empra diverses funcions de pols localitzades en el temps amb una alta relació de supressió de lòbuls laterals, la qual cosa permet millorar l'eficiència espectral i el rendiment del sistema com a factors clau en les xarxes òptiques de pròxima generació, i proporciona una bona alternativa a la tècnica CP-OFDM. Esta Tesi pretén fer un pas avant en la proposta de formats de modulació per a ser utilitzats en sistemes VLC com a tecnologia habilitadora en xarxes 6G. Per tant, es proposa el sistema Flip-FBMC amb un algoritme de truncament per a oferir una transmissió d'alta velocitat amb baixa latència Flip-FBMC mitjançant l'ús de l'algoritme de transformació ortogonal isotròpica (IOTA) i la capa PHYsical per a DYnamic AccesS i filtres de ràdio cognitiva (PHYDYAS). En aquesta Tesi, es proposa l'equalització multitap per als sistemes VLC en interiors per a mitigar la interferència imaginària intrínseca (IMI) en un canal amb perfils de retards elevat. A més, el rendiment d'error dels senyals FBMC no coherents es millora mitjançant l'anàlisi de la propietat de la localització de temps-freqüència amb la funció gaussiana estesa (EGF), on el factor de dispersió exercix un paper crucial en la determinació de l'equilibri entre les característiques espectrals i la reconstrucció òptima de la qualitat del senyal. En tal escenari, a causa del rang dinàmic limitat del díode emissor de llum (LED), la millora de la precisió de l'estimació depén dels nivells de potència dels pseudopilots amb l'ús de l'arquitectura del Mètode d'Aproximació d'Interferència (IAM) i per tant, no és adequada en sistemes VLC d'il·luminació i comunicació. A més, la Tesi proporciona la primera anàlisi teòrica que informa de la degradació en l'estimació per a diversos factors de clipping basada en l'impacte del nivell d'interferència imaginari fora de la zona de primer orde que no pot ser estimada mitjançant el preàmbul de IAM. No obstant això, s'ha d'emfatitzar en el valor de la tècnica Flip-FBMC/IAM per a proporcionar el model unipolar en comparació amb l'ús del format FBMC òptic polaritzat amb corrent continu (DCO-FBMC) que patix una reducció en l'estimació de la precisió. Per tant, s'ha demostrat el descens del rendiment amb el sistema DCO-FBMC a causa del IMI induït fora dels símbols d'orde zero, i que és més evident quan es requerixen nivells baixos de corrent DC. Des d'esta perspectiva, la tècnica de repetició de trames amb senyals Flip-FBMC ha demostrat ser una solució important per a minimitzar la interferència induïda. Per tant, en esta Tesi, la modulació Flip-FBMC amb repetició de trames i perfil de filtre PHYDYAS es proposa com un candidat viable per a fer front al rang dinàmic restringit del LED, en comparació amb el rendiment dels sistemes Flip-CP-OFDM i Flip-FBMC/IAM en futures xarxes 6G basades en accés VLC. / [EN] The sixth generation (6G) network is the potential solution to meet the exponentially increasing requirements of the emerging services and applications. The 6G platform expects to offer high data rates, ultra-high connectivity, and low latency based on the required key performance indicators (KPIs). The visible light communication (VLC) technology represents a key technology for 6G network but requires an efficient advanced modulation technique to support such requirements. In the last decades, optical signals based on Orthogonal Frequency Division Multiplexing (OFDM) scheme has attracted a lot of attention and become the most popular modulation among several multicarrier access schemes, thanks to its robustness and simplicity against multipath fading using the cyclic prefix (CP). One of the most candidate waveforms that is considered as the promising modulation technique for the next generation requirements and applications is Filter Bank MultiCarrier (FBMC) multiplexing. The major benefit of FBMC scheme is non-reliance on CP and high numbers of guard band samples, thereby, it employs several well time-frequency localized pulse functions with high side-lobe suppression ratio instead, which allows enhancing the spectral efficiency and system performance as key factors in next generation optical networks, and provides a good alternative to CP-OFDM technique. This Thesis aims to make a step forward in proposing modulation formats to be used in VLC systems as enabling technology in 6G networks. Hence, Flip-FBMC system with a truncation algorithm is proposed to offer a high-speed transmission with low latency by tackling the doubled-overhead tails at the subframes of Flip-FBMC burst by the use of the isotropic orthogonal transformation algorithm (IOTA) and PHYsical layer for DYnamic AccesS and cognitive radio (PHYDYAS) filters. Multitap equalization is proposed in this Thesis for the sake of mitigating the intrinsic imaginary interference (IMI) over a channel with high delays profile for indoor VLC system. Moreover, the error performance of non-coherent FBMC signals is enhanced by analysing the property of time-frequency localization with Extended Gaussian Function (EGF), where the spreading factor plays a crucial role in determining the trade-off between the spectral features and optimal reconstruction of signal quality. In such scenario, due to the limited dynamic range of light emitting diode (LED), improving in the accuracy of estimation depends on the power-levels of pseudo pilots with the use of Interference Approximation Method (IAM) architecture. Thereby, the analysis reveals that IAM sequence is not suitable for a real transmission scenario due to high power of IAM over the payload data which conflicts with VLC purposes of illumination and communication simultaneously. Additionally, the Thesis provides the first theoretical analysis reporting the degradation of estimation accuracy for several clipping ratios based on the impact of imaginary interference level outside the first order neighbourhood zone that cannot be estimated by IAM preamble. However, the value of Flip-FBMC/IAM technique in providing the unipolar model must be emphasized compared to the use of Direct Current biased Optical FBMC (DCO-FBMC) format that suffers from a reduction in estimating accuracy. Thereby, the downfall performance with DCO-FBMC system has been reported because of the induced IMI that spreads out the first neighbourhood symbols, which is more evident when low levels of the added DC-bias are required. From such perspective, the frame repetition technique with Flip-FBMC signals has been demonstrated as a major solution for minimizing the induced interference. Therefore, in this Thesis, Flip-FBMC/frame repetition with PHYDYAS profile is proposed as a viable candidate to cope with the restricted dynamic range of the LED, compared to the performance for each Flip-CP-OFDM and Flip-FBMC/IAM system in future 6G networks based on VLC access. / Bahaaelden, MS. (2024). Novel 5G-Modulation Formats and Their Application in Optical Wireless Communications [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/204634

In the past decades, wireless Machine-to-Machine (M2M) networks have been developed in various industrial and public service areas and envisioned to improve our daily life in next decades, e.g., energy, manufacturing, transportation, healthcare, and safety. With the advantage of low cost, flexible deployment, and wide coverage as compared to wired communications, wireless communications play an essential role in providing information exchange among the distributed devices in wireless M2M networks. However, an intrinsic problem with wireless communications is that the limited radio spectrum resources may result in unsatisfactory performance in the M2M networks. With the number of M2M devices projected to reach 20 to 50 billion by 2020, there is a critical need to solve the problems related to the design and applications in the wireless M2M networks. In this dissertation work, we study the wireless M2M networks design from three closely related aspects, the wireless M2M communication reliability, efficiency, and Demand Response (DR) control in smart grid, an important M2M application taking the advantage of reliable and efficient wireless communications. First, for the communication reliability issue, multiple factors that affect communication reliability are considered, including the shadowing and fading characteristics of wireless channels, and random network topology. A general framework has been proposed to evaluate the reliability for data exchange in both infrastructure-based single-hop networks and multi-hop mesh networks. Second, for the communication efficiency issue, we study two challenging scenarios in wireless M2M networks: one is a network with a large number of end devices, and the other is a network with long, heterogeneous, and/or varying propagation delays. Media Access Control (MAC) protocols are designed and performance analysis are conducted for both scenarios by considering their unique features. Finally, we study the DR control in smart grid. Using Lyapunov optimization as a tool, we design a novel demand response control strategy considering consumer’s comfort requirements and fluctuations in both the renewable energy supply and customers’ load demands. By considering those unique features of M2M networks in data collection and distribution, the analysis, design and optimize techniques proposed in this dissertation can enable the deployment of wireless M2M networks with a large number of end devices and be essential for future proliferation of wireless M2M networks. / Graduate / 0544 / flintlei@gmail.com

Design techniques and procedures to improve performances of radio-frequency and millimeter-wave front-end integrated circuits were developed. Power amplifiers for high data-rate wireless communication applications were designed using CMOS technology employing a novel device resizing and concurrent power-combining technique to implement a multi-mode operation. Comprehensive analysis on the efficiency degradation effect of multi-input-single-output combining transformers with idle input terminals was performed. The proposed discrete resizing and power-combining technique effectively enhanced the efficiency of a linear CMOS power amplifier at back-off power levels. In addition, a novel power-combining transformer that is suitable to generate multi-watt-level output power was proposed and implemented. Employing the proposed power-combining transformer, a high-power linear CMOS power amplifier was designed. Furthermore, receiver building blocks such as a low-noise amplifier, a down-conversion mixer, and a passive balun were implemented using SiGe technology for W-band applications.