This research will investigate the problem on the propagation of electromagnetic wave through a specific nanomaterial. The nanomaterial analyzed is a material consisting of a field of Pt nanorods. This field of Pt nanorods are deposited on a substrate which consists of a RuO2 nano structure. When the nanorod is exposed to an electron beam emitted by a TEM (Transmission electron microscopy). A wave disturbance has been observed. A video taken within the chamber shows a wave with a speed in the scale of um/s (Á?10Á?^(-6) m/s), which is 14 orders of magnitude lower than speed of light in free space (approximate 3ÁÁ?10Á?^8 m/s ). A physical and mathematical model is developed to explain this phenomenon. Due to the process of fabrication, the geometry of the decorated Pt nanorod field is assumed to be approximately periodic. The nanomaterials possess properties similar to a photonic crystal. Pt, as a noble metal, shows dispersive behaviours that is different from those ones of a perfect or good conductors. A FDTD algorithm is implemented to calculate the band diagram of the nanomaterials. To explore the dispersive properties of the Pt nanorod field, the FDTD algorithm is corrected with a Drude Model. The analysis of the corrected band diagram illustrates that the group velocity of the wave packet propagating through the nanomaterial can be positive, negative or zero. The possible zero-group velocity is therefore used to explain the extremely low velocity of wave (wave envelope) detected in the TEM.

The recent development of the commercially viable thin film electro-acoustic technology has triggered a growing interest in the research of plate guided wave or Lamb wave components owing to their unique characteristics. In the present thesis i) an experimental study of the thin film plate resonators (FPAR) performance operating on the lowest symmetrical Lamb wave (S0) propagating in highly textured AlN membranes versus a variety of design parameters has been performed. The S0 mode is excited through an Interdigital Transducer and confined within the structure by means of reflection from metal strip gratings. Devices operating in the vicinity of the stop-band center exhibiting a Q-value of up to 3000 at a frequency around 900MHz have been demonstrated. Temperature compensation of this type of devices has been studied theoretically and successfully realized experimentally for the first time. Further, integrated circuit-compatible S0 Lamb based two-port FPAR stabilized oscillators exhibiting phase noise of -92 dBc/Hz at 1 kHz frequency offset with feasible thermal noise floor below -180 dBc/Hz have been tested under high power for a couple of weeks. More specifically, the FPARs under test have been running without any performance degradation at up to 27 dBm loop power. Further, the S0 mode was experimentally demonstrated to be highly mass and pressure sensitive as well as suitable for in-liquid operation, which together with low phase noise and high Q makes it very suitable for sensor applications; ii) research in view of FPARs operating on other types of Lamb waves as well as novel operation principles has been initiated. In this work, first results on the design, fabrication and characterization of two novel type resonators: The Zero Group Velocity Resonators (ZGVR) and The Intermode-Coupled Thin Film Plate Acoustic Resonators (IC-FPAR), exploiting new principles of operation have been successfully demonstrated. The former exploits the intrinsic zero group velocity feature of the S1 Lamb mode for certain combination of design parameters while the latter takes advantage of the intermode interaction (involving scattering) between S0 and A1 Lamb modes through specially designed metal strip gratings (couplers). Thus both type of resonators operate on principles of confining energy under IDT other than reflection.

Ces dernières années, les modes de Lamb à vitesse de groupe nulle (ZGV) se sont révélés être un outil efficace pour sonder localement et précisément l'épaisseur d'un échantillon ou les propriétés mécaniques de matériaux isotropes ou anisotropes. Ce type particulier d'ondes guidées, telles de fortes résonances locales de la structure, résulte de l'interférence de deux ondes de Lamb ayant une vitesse de phase opposée et coexistant pour un couple fréquence-nombre d'ondes particulier. Les ultrasons laser ont démontré leur capacité à générer et détecter efficacement de telles résonances locales dans la gamme des MHz. En effet, la configuration tout optique, constituée d'une source laser pulsée pour générer les ondes élastiques et d'un interféromètre pour sonder le déplacement normal associé, évite tout contact avec l'échantillon, limitant ainsi l'élargissement ou la suppression de résonances. L'utilisation de modes ZGV pour suivre la fatigue des matériaux et sonder des phénomènes non linéaires reste cependant un défi et constitue le cœur des travaux de recherche présentés ici. La partie théorique porte sur la compréhension de l’effet de la fatigue mécanique sur les modes ZGV à travers l’analyse fréquence-nombre d’ondes des modes de Lamb. La partie expérimentale est consacrée à l’application de cette technique pour l'ECND et le suivi de la fatigue de plaques métalliques minces. Les modes ZGV en ultrasons laser montrent un grand potentiel pour localiser les dommages dus à la fatigue, prédire la vie en fatigue et évaluer qualitativement, voire quantitativement, les différents stades de dommages causés par la fatigue. / In recent years, zero-group-velocity (ZGV) Lamb modes have proven to be an efficient tool to probe locally and very accurately the thickness of a sample or the mechanical properties of either isotropic or anisotropic materials. This particular type of guided waves, corresponding to sharp local resonances of the structure, results of the interference of two Lamb waves having opposite phase velocity and coexisting at a couple given frequency-wavenumber. The laser ultrasonic technique has demonstrated its ability to efficiently generate and detect such local resonances within the MHz frequency range. Indeed, the all-optical setup, consisting of a pulsed laser source to generate elastic waves and of an interferometer to probe the associated normal displacement, avoids any contact with the sample, hence limiting the broadening or suppression of the resonances. Yet, the use of ZGV Lamb modes to monitor material fatigue and to probe nonlinear phenomena remains challenging and is the core of the here-reported research. The theoretical part of this PhD research deals with the understanding of the effect of mechanical fatigue on ZGV Lamb modes through the frequency-wavenumber analyzes of the Lamb waves. The experimental part of the PhD research is dedicated to the application of this technique for the nondestructive characterization and for the monitoring of mechanical and thermal fatigue of thin metal plates. Zero-group-velocity Lamb modes in laser ultrasonics shows great promises to locate fatigue damage, to predict the fatigue lifetime, and to qualitatively, and even quantitatively, assess the different stages of fatigue damage in   m- to potentially cm-thick solid plates.