Back to search

Michigan Technological University

F-TEMPER VS O-TEMPER BRAZING OF 3003 ALUMINUM RETURN BENDS

Abstract

dc:description.abstract

As-extruded (F-temper) 3003 return bends can provide cost savings over annealed (O-temper) return bends in aluminum heat exchangers. To assess if F-temper return bends are an alternative to the baseline O-temper bends, the grain structure, bending performance, and melting behavior were assessed through: Quantifying the effect of dispersoids on recrystallization Tracking bending behavior through grain morphology and surface texture Measuring the number and volume fraction of the α-Al(Mn,Fe)Si intermetallic Inducing incipient melting through high temperature thermal exposure. When homogenized at 620°C and 630°C, the F-temper bends had no orange peel texture, the grain size was equivalent to the annealed product, and no incipient melting was observed. No statistically significant differences were found in the onset of melting across any homogenization conditions.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Materials Science and Engineering (MS)
Level thesis:degree_level
Open Access Master's Thesis
Discipline thesis:degree_discipline
Department of Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Clark, Mieka R.
Committee members dc:contributor.committeemember
  • Stephen Kampe
  • Walter Milligan
Contributors dc:contributor
  • Paul Sanders

Subjects

dc:subject × 9

Rights

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Clark, Mieka R.. F-TEMPER VS O-TEMPER BRAZING OF 3003 ALUMINUM RETURN BENDS. Open Access Master's Thesis thesis, https://doi.org/10.37099/mtu.dc.etdr/1858