No description available.

The subject of this study is August Strindberg’s interaction with the visual media of his day. Its dual aim is to examine Strindberg’s work in the light of media history and to allow Strindberg’s work in turn to illuminate the media history of the fin de siècle. Taking its cue from the commonplace scholarly observation that Strindberg’s drama, particularly that of his later phase, is strikingly “cinematic”, it asks: What do such comparisons really tell us about Strindberg’s art and what, if anything, do they tell us about cinema? The thesis of this study is that the putatively “cinematic” style of Strindberg’s writings can only be understood against the backdrop of a mass culture, oriented towards the visual sense, which was undergoing rapid expansion at the turn of the last century. In devising his “dream play techniques”, it argues, Strindberg both drew on and reacted against various image-based modes of representation that had become extremely widespread in the late nineteenth century. The loss of reality that is so prominent a feature of works such as To Damascus (1898) or A Dream Play (1901) should in this sense be regarded as marked by an experience of mediatization, that is, the steady incorporation of all aspects of daily life by mass media technologies. Shifting the spotlight away from cinema, a critical encounter with Strindberg’s work can cast light on largely overlooked media practices such as magic lantern or Sciopticon exhibition, panoramic entertainments, instantaneous photography, and the introduction of the halftone process in printing. At the same time as it unsettles received notions of Strindberg’s drama as “cinematic”, the study seeks to show how the writings of this revolutionary artist can provide fresh material for a reassessment of life in a media-saturated age.

In this thesis, RF sections of a multi tier instantaneous frequency measurement (IFM) receiver which can operate in 2 &ndash / 18 GHz frequency band is designed, simulated and partially realized. The designed structure uses one coarse tier, three medium tiers and one fine tier for frequency discrimination. A novel reflective phase shifting technique is developed which enables the design of very wideband phase shifters using stepped cascaded transmission lines. Compared to the classical phase shifters using coupled transmission lines, the new approach came out to be much easier to design and fabricate with much better responses. This phase shifting technique is used in coarse and medium tiers. In fine frequency measurement tier, I/Q discriminator approach is used because reflective phase shifters would necessitate unacceptably long delay lines. Two I/Q discriminators are designed and fabricated using Lange directional couplers that operate in 2-6 GHz and 6-18 GHz, resulting in satisfactory response. Additionally, 6 GHz HP and 6 GHz LP distributed filters are designed and fabricated to be used for these I/Q discriminators in fine tier. In order to eliminate possible ambiguities in coarse tier, a distributed element LP-HP diplexer with 10 GHz crossover frequency is designed and fabricated successfully to be used for splitting the frequency spectrum into 2-10 GHz and 10-18 GHz to ease the design and realization problems. Three power dividers operating in the ranges 2-18 GHz, 2-6 GHz and 6-18 GHz are designed for splitting incoming signals into different branches. All of these dividers are also fabricated with satisfactory response. The fabricated components are all compact and highly reproducible. The designed IFM can tolerate 48 degrees phase margin for resolving ambiguity in the tiers while special precautions are taken in fine tier to help ambiguity resolving process also. The resulting IFM provides a frequency resolution below 1 MHz in case of using an 8-bit sampler with a frequency accuracy of 0.28 MHz rms for 0 dB input SNR and 20 MHz video bandwidth.

Microwave limiting amplifiers are the key components of Instantaneous Frequency Measurement (IFM) systems. Limiting amplifiers provide constant output power level in a wide input dynamic range and over a broad frequency band. Moreover, limiting amplifiers are high gain devices that are used to bring very low input power levels to a constant output power level. Besides, limiting amplifiers are required to provide minimum small signal gain ripple in order not to reduce the sensitivity of the IFM system over the operating frequency band. In this thesis work, a high gain, medium power, 2-18 GHz limiting amplifier module is designed, simulated, fabricated and measured. First, a 3-stage cascaded amplifier with 27 dB small signal gain is designed and fabricated. The 3-stage amplifier is composed of a novel cascaded combination of negative feedback and distributed amplifiers that provides the minimum small signal gain ripple and satisfactory input and output return losses inside 2-18 GHz frequency band. Then, the designed two 3-stage amplifiers and one 4-stage amplifier are cascaded to constitute a limiting amplifier module with minimum 80 dB small signal gain. The designed 10-stage limiting amplifier module also includes an analog voltage controllable attenuator to be used for compensating the gain variations resulting from temperature changes. The fabricated 10-stage limiting amplifier module provides 20 +/- 1.2 dBm output power level and excellent small signal gain flatness, +/- 2.2 dB, over 2-18 GHz frequency range.

Σκοπός της παρούσας διπλωματικής εργασίας είναι η δημιουργία ενός συστήματος μίξης ηχητικών σημάτων και προσπάθεια διαχωρισμού τους με βάση τις μεθόδους τυφλού διαχωρισμού σημάτων. Έχοντας ως δεδομένα τα αρχικά σήματα των πηγών γίνεται προσπάθεια, αρχικά μέσω της εφαρμογής της μεθόδου Ανάλυσης Ανεξάρτητων Συνιστωσών (ICA) για την περίπτωση της στιγμιαίας μίξης και στη συνέχεια μέσω της χρήσης αλγορίθμων που στηρίζονται στο μοντέλο παράλληλου παράγοντα (PARAFAC) για την περίπτωση της συνελικτικής μίξης, να προσδιοριστούν τα σήματα των πηγών από τα σήματα μίξης. Επιπλέον, τροποποιώντας τις παραμέτρους του συστήματος που μελετάμε σε κάθε περίπτωση, προσπαθούμε να πετύχουμε τη βέλτιστη απόδοση του διαχωρισμού. / The subject of this diploma thesis is the creation of a mixing system of speech signals and the attempt of their separation using the methods of blind source separation (BSS). Considering the original source signals known, we attempt, firstly by using independent component analysis for instantaneous mixtures and then by using PARAFAC model for convolutive mixtures, to extract the original source signals from the mixing signals. Moreover, by modifying the parameters of the system we make an effort to achieve the best performance of the separation.

It was the purpose of this design study to explore the Geometer’s Sketchpad dynamic mathematics software as a tool to model the derivative in introductory calculus in a manner that would foster a deeper conceptual understanding of the concept – developing domain specific understanding. Sketchpad’s transformation capabilities have been proved useful in the exploration of mathematical concepts by younger learners, college students and professors. The prospect of an open-ended exploration of mathematical concepts motivated the author to pursue the possibility of representing the concept of derivative in dynamic forms. Contemporary CAS studies have predominantly dwelt on static algebraic, graphical and numeric representations and the connections that students are expected to make between them. The dynamic features of Sketchpad and such like software, have not been elaborately examined in so far as they have the potential to bridge the gap between actions, processes and concepts on the one hand and between representations on the other. In this study Sketchpad model-eliciting activities were designed, piloted and revised before a final implementation phase with undergraduate non-math major science students enrolled for an introductory calculus course. Although most of these students had some pre-calculus and calculus background, their performance in the introductory course remained dismal and their grasp of the derivative slippery. The dual meaning of the derivative as the instantaneous rate of change and as the rate of change function was modeled in Sketchpad’s multiple representational capabilities. Six forms of representation were identified: static symbolic, static graphic, static numeric, dynamic graphic, dynamic numeric and occasionally dynamic symbolic. The activities enabled students to establish conceptual links between these representations. Students were able to switch systematically from one form of (foreground or background) representation to another leading to a unique qualitative understanding of the derivative as the invariant concept across the representations. Experimental students scored significantly higher in the posttest than in the pretest. However, in comparison with control group students the experimental students performed significantly better than control students in non-routine problems. A cyclical model of developing a deeper concept image of the derivative is therefore proposed in this study. / Educational Studies / D. Ed. (Education)

As Diretrizes da Política Nacional de Transporte Hidroviário apresentam metas ambiciosas para os próximos anos quanto à construção de eclusas e ao aumento da participação do transporte aquaviário de carga na matriz brasileira. A bibliografia expõe que os custos são otimizados quando um desnível é transposto com a construção do menor número eclusas, o que resulta na busca pela transposição de desníveis significativos com a execução de eclusas com uma única câmara. No entanto, problemas hidráulicos encontrados junto às comportas de enchimento e esvaziamento estão entre as principais limitações para o aumento da altura de queda das eclusas. Os diferenciais de pressão entre as faces de montante e jusante das comportas e a variação do seu grau de abertura durante as operações de enchimento e esvaziamento de eclusas de navegação de média e alta queda geram escoamentos turbulentos, com velocidades e pressões capazes de produzir danos às estruturas. Com o objetivo de analisar os parâmetros hidráulicos do escoamento médio a jusante de comportas dos sistemas de enchimento e esgotamento de eclusas, do tipo segmento invertida, e as pressões instantâneas ao longo do teto e da base do conduto, de forma a identificar e caracterizar padrões de comportamento que auxiliem na elaboração de projetos e no aperfeiçoamento dessas estruturas, foram conduzidas duas investigações complementares, a experimental e a numérica. A investigação experimental, desenvolvida no Laboratório de Obras Hidráulicas do Instituto de Pesquisas Hidráulicas da Universidade Federal do Rio Grande do Sul, proporcionou a geração de dados discretos de pressão instantânea ao longo do teto e da base do conduto para 53 condições de abertura e vazão, para escoamento em regime permanente. A investigação numérica, realizada com o software Flow-3D®, de Dinâmica de Fluidos Computacional, viabilizou a geração de dados do escoamento médio no interior do conduto para 12 condições de abertura e vazão, que reproduziam as simulações experimentais. Os resultados das simulações realizadas no Flow-3D® com modelo de turbulência k- e demonstraram a sua aplicabilidade no estudo do escoamento médio a jusante de comportas de sistemas de enchimento e esvaziamento de eclusas. O modelo numérico reproduziu os dados experimentais de pressão a montante da comporta e os formatos das curvas de pressão ao longo da base e do teto do conduto a jusante da comporta, apresentando resultados mais aderentes para a base. Para as condições operacionais com a comporta parcialmente aberta, as menores pressões ocorreram no teto do conduto próximo à comporta, região de recirculação do escoamento, e junto ao terminal da comporta. A partir da análise dos dados foi possível a caracterização do comportamento das pressões médias, das flutuações de pressão e das pressões máximas e mínimas ao longo da base e do teto do conduto por meio da relação entre coeficientes adimensionais de posição e de pressão. / Brazilian Waterways Policy has ambitious goals for constructing navigation locks and increasing the participation of the cargo transport through waterways in the national transport matrix. Literature states that costs are optimized by the construction of fewer locks for the transposition of water levels by vessels, which results in the search for transposition of significant lifts by using navigation locks with single camera. However, the hydraulic problems in the filling and emptying systems, especially close to the valves, are among the major limitations to increase the lock lift. During filling and emptying operations of medium and high-lift locks, the pressure difference between upstream and downstream sides of lock valve and its opening generate turbulent flows with associated flow velocities and pressures capable of damaging the structures. In the current research, experimental and numerical investigations were conducted in order to analyze the mean flow through lock culvert valves and the instantaneous pressures behavior along the culvert roof and base, and to identify and to characterize hydraulic parameters which could be useful for project development and improvement of these structures. The experimental research was conducted at the “Laboratório de Obras Hidráulicas” of the “Instituto de Pesquisas Hidráulicas” of the “Universidade Federal do Rio Grande do Sul” and provided the generation of discrete data of instantaneous pressure along the culvert roof and base for 53 conditions of flow and valve opening. Experimental simulations were performed with steady state flow. Numerical investigation applied the Computational Fluid Dynamics software Flow-3D® and produced information for the mean flow inside the culvert for 12 valve opening and flow conditions, which reproduced the experimental simulations. valve opening and flow conditions, which reproduced the experimental simulations. The numerical results, obtained by using the k-e turbulence model, demonstrated the applicability of Flow-3D® in the study of the mean flow downstream of lock culvert valves. The numerical model was able to reproduce the experimental data of pressure along the culvert base and roof presenting more accuracy to base data. For partially open gate conditions, the lowest pressures were verified next to the valve lip and at the downstream culvert roof close to the valve, which correspond to the recirculating flow region. From data analysis it was possible to characterize the behavior of the mean pressure, pressure fluctuations and extreme pressures along the culvert base and roof by the relationship between dimensionless coefficients of position and pressure.

abstract: This work examines two main areas in model-based time-varying signal processing with emphasis in speech processing applications. The first area concentrates on improving speech intelligibility and on increasing the proposed methodologies application for clinical practice in speech-language pathology. The second area concentrates on signal expansions matched to physical-based models but without requiring independent basis functions; the significance of this work is demonstrated with speech vowels. A fully automated Vowel Space Area (VSA) computation method is proposed that can be applied to any type of speech. It is shown that the VSA provides an efficient and reliable measure and is correlated to speech intelligibility. A clinical tool that incorporates the automated VSA was proposed for evaluation and treatment to be used by speech language pathologists. Two exploratory studies are performed using two databases by analyzing mean formant trajectories in healthy speech for a wide range of speakers, dialects, and coarticulation contexts. It is shown that phonemes crowded in formant space can often have distinct trajectories, possibly due to accurate perception. A theory for analyzing time-varying signals models with amplitude modulation and frequency modulation is developed. Examples are provided that demonstrate other possible signal model decompositions with independent basis functions and corresponding physical interpretations. The Hilbert transform (HT) and the use of the analytic form of a signal are motivated, and a proof is provided to show that a signal can still preserve desirable mathematical properties without the use of the HT. A visualization of the Hilbert spectrum is proposed to aid in the interpretation. A signal demodulation is proposed and used to develop a modified Empirical Mode Decomposition (EMD) algorithm. / Dissertation/Thesis / Doctoral Dissertation Electrical Engineering 2016

Les superpositions d'ondes modulées en amplitude et en fréquence (modes AM--FM) sont couramment utilisées pour modéliser de nombreux signaux du monde réel : cela inclut des signaux audio (musique, parole), médicaux (ECG), ou diverses séries temporelles (températures, consommation électrique). L'objectif de ce travail est l'analyse et la compréhension fine de tels signaux, dits "multicomposantes" car ils contiennent plusieurs modes. Les méthodes mises en oeuvre vont permettre de les représenter efficacement, d'identifier les différents modes puis de les démoduler (c'est-à-dire déterminer leur amplitude et fréquence instantanée), et enfin de les reconstruire. On se place pour cela dans le cadre bien établi de l'analyse temps-fréquence (avec la transformée de Fourier à court terme) ou temps-échelle (transformée en ondelettes continue). On s'intéressera également à une méthode plus algorithmique et moins fondée mathématiquement, basée sur la notion de symétrie des enveloppes des modes : la décomposition modale empirique. La première contribution de la thèse propose une alternative au processus dit ``de tamisage'' dans la décomposition modale empirique, dont la convergence et la stabilité ne sont pas garanties. \`A la place, une étape d'optimisation sous contraintes ainsi qu'une meilleure détection des extrema locaux du mode haute fréquence garantissent l'existence mathématique du mode, tout en donnant de bons résultats empiriques. La deuxième contribution concerne l'analyse des signaux multicomposantes par la transformée de Fourier à court terme et à la transformée en ondelettes continues, en exploitant leur structure particulière ``en ridge'' dans le plan temps-fréquence. Plus précisément, nous proposons une nouvelle méthode de reconstruction des modes par intégration locale, adaptée à la modulation fréquentielle, avec des garanties théoriques. Cette technique donne lieu à une nouvelle méthode de débruitage des signaux multicomposantes. La troisième contribution concerne l'amélioration de la qualité de la représentation au moyen de la ``réallocation'' et du ``synchrosqueezing''. Nous prolongeons le synchrosqueezing à la transformée de Fourier à court terme, et en proposons deux extensions inversibles et adaptées à des modulations fréquentielles importantes, que nous comparons aux méthodes originelles. Une généralisation du synchrosqueezing à la dimension 2 est enfin proposée, qui utilise le cadre de la transformée en ondelettes monogène. / Many signals from the physical world can be modeled accurately as a superposition of amplitude- and frequency-modulated waves. This includes audio signals (speech, music), medical data (ECG) as well as temporal series (temperature or electric consumption). This thesis deals with the analysis of such signals, called multicomponent because they contain several modes. The techniques involved allow for the detection of the different modes, their demodulation (ie, determination of their instantaneous amplitude and frequency) and reconstruction. The thesis uses the well-known framework of time-frequency and time-scale analysis through the use of the short-time Fourier and the continuous wavelet transforms. We will also consider a more recent algorithmic method based on the symmetry of the enveloppes : the empirical mode decomposition. The first contribution proposes a new way to avoid the iterative ``Sifting Process'' in the empirical mode decomposition, whose convergence and stability are not guaranteed. Instead, one uses a constrained optimization step together with an enhanced detection of the local extrema of the high-frequency mode. The second contribution analyses multicomponent signals through the short-time Fourier transform and the continuous wavelet transform, taking advantage of the ``ridge'' structure of such signals in the time-frequency or time-scale planes. More precisely, we propose a new reconstruction method based on local integration, adapted to the local frequency modulation. Some theoretical guarantees for this reconstruction are provided, as well as an application to multicomponent signal denoising. The third contribution deals with the quality of the time-frequency representation, using the reassignment method and the synchrosqueezing transform: we propose two extensions of the synchrosqueezing, that enable mode reconstruction while remaining efficient for strongly modulated waves. A generalization of the synchrosqueezing in dimension 2 is also proposed, based on the so-called monogenic wavelet transform.

Made available in DSpace on 2014-12-17T14:55:44Z (GMT). No. of bitstreams: 1 PauloVS_DISSERT.pdf: 1338370 bytes, checksum: 7f4728ef2faffa30200a5b0daf963f20 (MD5) Previous issue date: 2010-06-28 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / This work describes the experimental implementation of a shunt active power filter applied to a three-phase induction generator. The control strategy of active filter turned to the excitation control of the machine and to decrease the harmonics in the generator output current. Involved the implementation of a digital PWM switching, and was made a comparison of two techniques for obtaining the reference currents. The first technique is based on the synchronous dq reference method and the second on the theory of instantaneous power. The comparison is performed via simulation and experimental results. To obtain the experimental results, was mounted a bench trial and the control and communications needed were implemented using DSP - MS320F2812. The simulation results and experimental data proved the efficiency of the filter to apply, highlighting the technique of instantaneous power / Este trabalho descreve a implementa??o experimental de um filtro ativo paralelo de pot?ncia aplicado a um gerador de indu??o trif?sico. A estrat?gia de controle do filtro ativo voltou-se para o controle de excita??o da m?quina e para a minimiza??o dos harm?nicos na corrente de sa?da do gerador. Envolveu a implementa??o de um chaveamento PWM digital, tendo sido realizada a compara??o de duas t?cnicas para obten??o das correntes de refer?ncia. A primeira t?cnica se baseia no m?todo referencial s?ncrono dq e a segunda na teoria das pot?ncias instant?neas. A compara??o ? realizada via simula??o e resultados experimentais. Para obten??o dos resultados experimentais, foi montada uma bancada experimental e o controle e comunica??es necess?rias foram implementados utilizando-se um DSP - TMS320F2812. Os resultados de simula??o e experimentais obtidos comprovaram a efici?ncia do filtro para a aplica??o, com destaque para a t?cnica das pot?ncias instant?neas