Spelling suggestions: "subject:" water flow"" "subject:" later flow""
81 |
CFD MODELLING OF TWO-PHASE FLOWS AT SPILLWAY AERATORSTeng, Penghua January 2017 (has links)
Due to the high-speed flow in a chute spillway, cavitation damages often occur. This undesired phenomenon threatens the safety of the structure. For the purpose of eliminating the damages, an aerator is often installed in the spillway. To understand its characteristics, physical model tests are a popular method. To complement the model tests, computation fluid dynamics (CFD) simulations are used to study aerator flows. To represent the two-phase flows, multiphase models should be employed. This thesis examines two of them, namely, the Volume-Of-Fluid model (VOF) and Two-Fluid model. Based on the background of the Bergeforsen dam, the aerator flow is modelled by means of the VOF model. The simulated spillway discharge capacity is in accordance with the experimental data. Compared with the results, empirical formulas fail to evaluate the air supply capacity of aerator as it is wider than the conventional width. A hypothetical vent modification is proposed. For the original and proposed layouts, the study illustrates the difference in the air-flow conditions. The results show that a larger vent area is, for a large-width aerator, preferable in the middle of the chute. To study the flip bucket-shaped aerators in the Gallejaur dam, physical model tests and prototype observations are conducted. The results lead to contradicting conclusions in terms of jet breakup and air entrainment. A CFD model is, as an option, employed to explain the reason of the discrepancy. The numerical results coincide with the prototype observations. The jet breakup and air entrainment are evaluated from air cavity profiles; the air-pressure drops are small in the cavity. The discrepancy is due to overestimation of the surface-tension effect in the physical model tests. Based on the experimental data of an aerator rig at the Laboratory of Hydraulics, Hydrology and Glaciology (VAW), ETH Zurich, the Two-Fluid model is used to predict air concentration distributions in the aerated flow. The model includes relevant forces governing the motion of bubbles and considers the effects of air bubble size. The numerical results are conformable to the experiments in the air cavity zone. Downstream of the cavity, the air concentration near the chute bottom is higher, which is presumably caused by the fact that the interfacial forces in the Two-Fluid model are underestimated. / <p>QC 20170224</p>
|
82 |
A Local Discontinuous Galerkin Dual-Time Richards' Equation Solution and Analysis on Dual-Time Stability and ConvergenceXiao, Yilong January 2021 (has links)
No description available.
|
83 |
An Integrated Hydrology/hydraulic And Water Quality Model For Watershed-scale SimulationsWang, Cheng 01 January 2009 (has links)
This dissertation presents the design of an integrated watershed model, WASH123D version 3.0, a first principle, physics-based watershed-scale model of integrated hydrology/hydraulics and water quality transport. This numerical model is comprised of three modules: (1) a one-dimensional (1-D) simulation module that is capable of simulating separated and coupled fluid flow, sediment transport and reaction-based water quality transport in river/stream/canal networks and through control structures; (2) a two-dimensional (2-D) simulation module, capable of simulating separated and coupled fluid flow, sediment transport, and reactive biogeochemical transport and transformation in two-dimensional overland flow systems; and (3) a three-dimensional (3-D) simulation module, capable of simulating separated and coupled fluid flow and reactive geochemical transport and transformation in three-dimensional variably saturated subsurface systems. The Saint Venant equation and its simplified versions, diffusion wave and kinematic wave forms, are employed for surface fluid flow simulations and the modified Richards equation is applied for subsurface flow simulation. The reaction-based advection-dispersion equation is used as the governing equation for water quality transport. Several physically and mathematically based numerical options are provided to solve these governing equations for different application purposes. The surface-subsurface water interactions are considered in the flow module and simulated on the basis of continuity of interface. In the transport simulations, fast/equilibrium reactions are decoupled from slow/kinetic reactions by the decomposition of reaction networks; this enables robust numerical integrations of the governing equation. Kinetic variables are adopted as primary dependent variables rather than biogeochemical species to reduce the number of transport equations and simplify the reaction terms. In each time step, hydrologic/hydraulic variables are solved in the flow module; kinetic variables are then solved in the transport module. This is followed by solving the reactive chemical system node by node to yield concentrations of all species. Application examples are presented to demonstrate the design capability of the model. This model may be of interest to environmental scientists, engineers and decision makers as a comprehensive assessment tool to reliably predict the fluid flow as well as sediment and contaminant transport on watershed scales so as to evaluate the efficacy and impact of alternative watershed management and remediation techniques prior to incurring expense in the field.
|
84 |
Creating two-dimensional rivers from spline curvesAhl, Richard January 2022 (has links)
This study is concerned with digital two-dimensional rivers for games. Specifically the aim is to create a river shape from the basis of a spline curve and make it look like a river with a water flow-rate. This is achieved by developing an artifact capable of river simulations in 2D, with the flow-rate calculated using the necessary hydraulics equations. The scientific process described in Design Science Research Methodology for Information Systems Research is presented and followed. Artifact simulations are demonstrated and evaluated, especially calculations for river mean velocity and discharge are shown to be possible by assuming that the river channel is of trapezoidal shape. Simulations show a type of river not usually seen in games, a river with more accuracy than other game simulations. The artifact river simulations are however limited by a missing smoothness when going between different channel shapes. Also there could be a way of improving the texture used, or possibly use more then one texture in one simulation. The conclusion is that the methods used for river generation by this study could be part of a design tool that targets 2D games.
|
85 |
Study of Water Wetting in Two-Phase Oil-Water Flow in an Annular ChannelGardner, Taylor 13 July 2018 (has links)
No description available.
|
86 |
Mixing Studies on a Full Scale Aeration TankBoyko, Boris I. 09 1900 (has links)
The dispersion model was used to study mixing levels in a full scale aeration tank. The effect of air flow rate, water flow rate and diffuser type was investigated. The peak time technique proved satisfactory in predicting the theoretical tracer response curve generated using the dispersion model.
The dispersion model adequately described the longitudinal mixing that occurred in a full scale aeration tank equipped with fine and coarse bubble air diffusers.
Response curves from two tanks-in-series were also obtained. / Thesis / Master of Engineering (ME)
|
87 |
[en] INTERNAL EROSION INITIATION PROCESSES IN HOMOGENEOUS EARTHFILL DAMS: A CASE STUDY / [pt] PROCESSOS DE INICIAÇÃO DE EROSÃO INTERNA EM BARRAGENS DE TERRA HOMOGÊNEA: UM ESTUDO DE CASOCONRADO OLIVEIRA C DE CARVALHO 04 June 2024 (has links)
[pt] Em uma barragem de terra homogênea responsável pelo
abastecimento de água de um empreendimento privado, observou-se um processo
inicial de carreamento de partículas finas próximo ao pé do talude de jusante,
situação tida como um dos principais modos de falha de barragens. Embora esta
anomalia tenha sido devidamente controlada na estrutura em estudo, este trabalho
buscou encontrar as causas para a ocorrência detectada, visando aprofundar o
conhecimento sobre o assunto. Para isso, investigou-se o histórico da estrutura,
coletou-se amostras indeformadas próximo a região de interesse com a função de
realizar ensaios de laboratório para caracterizar o solo no local, determinar os
parâmetros físicos, aferir coeficientes de permeabilidade sob diferentes tensões
efetivas e encontrar a sua curva característica (SWCC) através de ensaios de papelfiltro. Com os resultados dos ensaios, foram elaborados modelos computacionais
sob diferentes cenários para investigar o comportamento dos gradientes hidráulicos.
Foi empregado o software Plaxis LE para esta função. Avaliou-se se a adoção de
parâmetros não saturados ou a consideração de análises tridimensionais promoveria
alguma alteração no padrão de fluxo na estrutura em estudo, o que não ocorreu.
Também foi considerado se a interação solo-atmosfera poderia gerar gradientes
hidráulicos críticos através de ciclos de chuva e evaporação, mas também não houve
resultados críticos. Ao variar o coeficiente de permeabilidade no corpo da
barragem, observou-se que existe uma relação inversamente proporcional com o
gradiente hidráulico. Desta forma, entende-se que a presença de solos orgânicos no
pé do talude de jusante pode ter acarretado o processo de carreamento observado. / [en] In a homogeneous earthfill dam responsible for the water supply of a private
company, an initial process of internal erosion was observed near the base of the
downstream slope, which is listed as one of the main dam failures causes in the
world. Although this problem has been correctly solved at the studied structure, this
thesis aimed to find the causes for the detected anomaly in order to increase
knowledge about this subject. To do so, the history of the structure was investigated,
undisturbed samples were collected near the region of interest to carry out
laboratory tests to characterize the soil, determine the physical parameters, measure
permeability coefficients under different effective stresses and find its characteristic
curve (SWCC) through filter paper tests. With the results of the tests, computational
models were elaborated under different scenarios to investigate the behavior of
hydraulic gradients. The software Plaxis LE was used in this work. It was evaluated
whether the adoption of unsaturated parameters or 3D analysis would promote any
change in the flow pattern in the studied structure, which did not occur. It was also
considered whether the soil-atmosphere interaction could generate critical
hydraulic gradients through rainfall and evaporation cycles, but there were no
critical results either. Although, permeability seems to have a an inversely
proportional relationship with hydraulic gradient. Thus, it is understood that the
formation of organic soils at the toe of the downstream slope may have led to the
observed internal erosion process.
|
88 |
Förstudie till våtmark i Rimbo : Design för optimal hydrologi och kvävereningJaremalm, Maria January 2005 (has links)
<p>The euthropthication of the Baltic Sea is a threat that is beginning to be taken seriously by the governments concerned. In Sweden, regulations concerning the allowed nitrogen (N) concentration in the effluent water from wastewater treatment plants are being tightened up. The Rimbo wastewater treatment plant has been imposed to reduce the annual mean concentration of total N in the effluent water to levels below 15 mg l-1. A more and more common way to reduce the nitrogen level in wastewater is to let the water pass through a wetland. This study investigates the possibility to build this kind of wetland at the outlet of the Rimbo wastewater treatment plant.</p><p>A prestudy of the topography, soil characteristics and groundwater flow indicates that the land area in question is well suited for the construction of a wetland. A proposal for the design has been made by using a physically based computer model developed in the PRIMROSE project (PRocess based Integrated Management of constructed and Riverine wetlands for Optimal control of wastewater at catchment ScalE), which is financed by the EU. Analysis of the residence time distribution (RTD) is a tool for understanding wetland design characteristics and can be used for wetland engineering such as optimizing design for best possibleefficiency in nitrogen removal. In order to characterize the performance of a wetland, it is useful to translate the RTD to a key figure representing the treatment efficiency. In this work, two types of such key figures have been used. Key figure 1 gives the hydraulic efficiency and Key figure 2 gives an estimation of the nitrogen retention by an integration of hydraulic characteristics and the chemical transformation of nitrogen.</p><p>The results of this study show that constructing a wetland in Rimbo probably would be an efficient way to reduce the nitrogen level at the effluent of the wastewater plant below the limits of the regulations. In addition, a wetland would form a nice place of recreation for the people in Rimbo and also make a good habitat for birds.</p> / <p>Övergödningen i Östersjön är ett problem som uppmärksammas alltmer. Ett led i att minska kvävebelastningen på Östersjön är ökade krav på rening i de svenska kommunala reningsverken. Rimbo avloppsreningsanläggning har blivit ålagd ett riktvärde för totalkväve på 15 mg l-1 i utgående vatten, vilket motsvarar en reningsgrad som inte uppnås idag. Ett alltmer vanligt sätt att minska föroreningshalterna är att anlägga våtmarker i anslutning till reningsverken för att efterpolera spillvattnet. Det här arbetet är en del av en förstudie till en sådan våtmark i Rimbo.</p><p>En förundersökning av topografi, jordart och grundvattenflöden indikerar att det område som föreslagits i anslutning till reningsverket i Rimbo lämpar sig väl för ett våtmarksbygge. Förslag till utformning har tagits fram med hjälp av en fysikaliskt baserad modell över vattenströmning, utvecklad inom det EU-finansierade projektet PRIMROSE (PRocess based Integrated Management of constructed and Riverine wetlands for Optimal control of wastewater at catchment ScalE). Analys av vattnets uppehållstidsfördelning ger förståelse för våtmarkens egenskaper och kan därför användas vid t ex optimering av våtmarksdesign med avseende på kväverening. För att på ett enkelt sätt kunna jämföra olika våtmarkers effektivitet är det praktiskt att översätta uppehållstidsfördelningen till ett nyckeltal för reningseffekten. I det här arbetet har två olika sådana nyckeltal beräknats. Det första ger den hydrauliska effektiviteten och det andra bygger på en metod där våtmarkens interna hydraulik integreras med den kemiska omvandlingen av kväve. Nyckeltal 1 ger ett mått på hur stor del av volymen i våtmarken som används för kväverening, medan Nyckeltal 2 ger ett mått på den procentuella kväveavskiljningen.</p><p>Den här förstudien visar att en våtmark sannolikt skulle vara ett utmärkt sätt att klara riktvärdet för kvävehalten vid reningsverket i Rimbo. Därutöver skulle en våtmark kunna utgöra ett positivt inslag i landskapet och öka den biologiska mångfalden, inte minst vad gäller fågelliv.</p>
|
89 |
Paléohydrologie de surface des mers nordiques à l’Holocène terminal (derniers 3000 ans) : le message du phytoplancton à squelette calcaire et organique / Late Holocene surface water changes in the eastern Nordic Seas : the message from carbonate and organic-walled phytoplankton microfossilsDylmer, Christian 17 December 2013 (has links)
La variabilité de l’intensité du flux d’eaux atlantiques et de la nature des masses d’eau de surface le long des marges occidentales de la Norvège, de la mer de Barents et du Svalbard a été reconstituée sur la base des assemblages de coccolithes et dinokystes présents dans cinq carottes sédimentaires marines représentatives de l’Holocène terminal. Les résultats sont présentés sous la forme de reconstructions qualitatives et quantitatives (fonctions de transfert MAT) à haute résolution temporelle (échelle décennale à sub-séculaire). Un travail visantà valider les traceurs micropaléontologiques utilisés a été réalisé en parallèle à l’objectif principal, et s’est en particulier nourri de la collecte et de l’examen de populations vivantes distribuées le long de plusieurs transectszonaux en mer de Norvège, mer d’Islande et à travers le détroit de Fram.Nos résultats indiquent que la partie orientale des mers Nordiques (66 à 77°N) a été sujette à une tendance globale à l’augmentation du flux d’eaux atlantiques (AW) au cours des derniers 3000 ans. La dynamique récente de ce flux méridien est supposée répondre à la modulation long-terme de la force et de la localisation de la ceinture des vents d’ouest qui est essentiellement pilotée par l’Oscillation Nord Atlantique. Ce même mécanisme atmosphérique réconcilie le déplacement zonal et contradictoire du front arctique entre le domaine ouest-norvégien, et les façades occidentales de la mer de Barents et du détroit de Fram. La variabilité rapide du flux d’AW reproduit la succession des phases climatiques historiques classiques chaudes (Période Chaude Romaine, Période Chaude Médiévale, Période Moderne : flux accentué d’AW) et froides (Période Sombre, Petit Age Glaciaire : flux réduit d’AW) des derniers 2500 ans. Un événènement rapide de renforcement du flux d’AW en mers Nordiques a été identifié pendant le Petit Age Glaciaire entre 330 et 410 ans BP (cal.). Nos résultats indiquent que les variations d’intensité du flux d’AW vers l’Océan Arctique ont eu un impact majeur sur la distribution de la glace de mer arctique au cours du dernier millier d’années, les variations reconstruites de l’extension du couvert de glace à l’echelle de l’océan arctique étant parfaitement corrélées (échelle subséculaire) avec nos reconstructions qualitatives de la dynamique de l’AW au large du Svalbard et de la mer de Barents. La diminution importante de l’extension de la banquise durant le 20ème siècle est synchrone d’un flux record d’AW à travers le détroit de Fram, flux qui, d’après nos données, est sans précédent pour les derniers 3000 ans. / Five marine sediment cores distributed along the Norwegian, western Barents Sea, and Svalbard continental margins have been investigated in order to reconstruct late Holocene changes in the poleward flow of the Norwegian Atlantic Current (NwAC) and West Spitsbergen Current (WSC) and the nature of the upper surface water masses within the eastern Nordic Seas. This research project is based on the use of dinocyst and coccolith assemblages for qualitative and quantitative reconstructions of surface water conditions from high resolution sediment cores, and involve upstream investigations on proxy reliabilities. The investigated area (66 to 77°N) was affected by an overall increase in the strength of the AW flow from 3000 cal. yrs BP to the Present. The long-term modulation of westerlies strength and location which are essentially driven by the dominant mode of the North Atlantic Oscillation (NAO), is thought to explain the observed dynamics of the AW flow. The same mechanism also reconciles the recorded opposite zonal shifts in the location of the Arctic Front between the area off western Norway and the western Barents Sea-eastern Fram Strait region. Submillenial changes in AW flow are organised according to known pre-Anthropocene warm (RWP, MCA and the Modern period: strong poleward flow) and cold (LIA, DA: weak poleward flow) climatic spells. A sudden short pulse of resumed high WSC flow interrupted the LIA in the eastern Nordic Seas from 330 to 410 cal. yrs BP. Our results are indicative of a major impact of AW flow dynamics on the Arctic sea ice distribution during the last millenium, when changes in reconstructed sea-ice extent are negatively correlated with the strength of the WSC flow off western Barents Sea and western Svalbard. The extensive decrease in sea ice extent during the last century is synchronous with an exceptional increase in AW flow. The previously reconstructed high amplitude warming of surface waters in eastern Fram Strait at the turn of the 19th century was therefore primarily induced by an excess flow of AW which stands as unprecedented over the last 3000 years.
|
90 |
Estudo topológico de escoamento trifásico óleo-água-ar através de sensor de impedância de resposta rápida do tipo \"wire-mesh\" / Topologic study of three-phase pipe flow by means of fast-response wire-mesh impedance sensorVelasco Peña, Hugo Fernando 27 February 2015 (has links)
A ocorrência frequente de escoamentos multifásicos em tubulações tem motivado um grande interesse acadêmico nas últimas décadas. O caso particular de escoamentos líquidolíquido é geralmente encontrado na indústria do petróleo, onde uma série de aplicações envolve escoamentos óleo-água, tais como a produção de petróleo e seu transporte. No entanto, ele não tem recebido a mesma atenção quando comparado com escoamentos gás-líquido. Ainda não existe uma explicação física razoável para um número significativo de fenômenos observados em escoamento óleo-água, como o fenômeno de redução de atrito, observado em escoamento disperso, e a estrutura interfacial ondulada em escoamento estratificado. Os escoamentos trifásicos têm sido ainda menos estudados. Há técnicas de medição, desenvolvidas para escoamento gás-líquido, que supostamente são adaptáveis aos escoamentos líquido-líquido, mas várias delas ainda precisam de validação adequada. O sensor wire-mesh, um método híbrido baseado na medição de resistência ou capacitância, que combina medição local intrusiva da fração de fase e imagens tomográficas transversais, oferece uma boa resolução espacial e alta resolução temporal em comparação com outras técnicas atuais. Porém, a literatura existente em aplicações do sensor wire-mesh cobre quase apenas o escoamento gás-líquido e, até agora, não é possível avaliar o limite de viscosidade do fluido para a sua aplicação. Neste contexto, este projeto propõe o estudo de aspectos importantes da fenomenologia de escoamentos líquido-líquido e líquido-líquido-gás com o auxílio da tecnologia wire-mesh. O principal objetivo prático é a validação da técnica wire-mesh como ferramenta de referência para o desenvolvimento de instrumentação para aplicações em campos petrolíferos, com especial atenção devotada ao efeito da viscosidade do óleo sobre a confiabilidade da medição e à extensão da tecnologia para lidar com escoamentos óleo-água-gás. / The frequent occurrence of multiphase flows in pipes has motivated a great research interest over the last decades. The particular case of liquid-liquid flow is commonly encountered in the petroleum industry, where a number of applications involve oil-water flow such as crude oil production and transportation. However, it has not received the same attention when compared to gas-liquid flow. There is no reasonable physical explanation for a significant number of phenomena observed in oil-water flow, as the drag reduction phenomenon observed in dispersed flow and the interfacial wavy structure of stratified flow. Much less has been investigated when it comes to three-phase flow. Several measurement techniques that are supposed to be adaptable to liquid-liquid flow have been proposed recently, but many of them still need proper validation. The wire-mesh sensor, a hybrid impedance-based method that combines intrusive local measurement of phase fraction and tomographic cross-sectional imaging, offers good spatial resolution and high temporal resolution in comparison with other current techniques. However, the existing literature on wire-mesh sensor applications covers almost only the gas-liquid flow and, so far, it is not possible to evaluate the fluid-viscosity limit for its application. In that context, this project proposes the study of important aspects of liquidliquid and liquid-liquid-gas flow phenomenology with the aid of the wire-mesh technology. The main goal is the validation of the wire-mesh technique as a reference tool for the development of instrumentation for oilfield application, with especial attention paid to the effect of oil viscosity on measurement reliability and the extension of the technology for dealing with oil-water-gas flow.
|
Page generated in 0.1079 seconds