A absorção é a etapa determinante da recuperação de acetona no Filter Tow, por reduzir a emissão de acetona e trazer melhorias à economia. Por isso, ela constitui o objeto deste estudo, que inclui desde a revisão dos conceitos fenomenológicos, considerando a escolha do melhor modelo de equilíbrio líquido-vapor, passando pela execução dos balanços coerentes de massa e o estabelecimento da Fotografia da situação original, relatando um caso complexo de transposição de pratos para recheios. Contudo, a operação das colunas de absorção é influenciada por outras variáveis de caráter desconhecido, ruídos em relação à fenomenologia, o que se pretende avaliar, justificando-se desenvolver estudo para avaliar seus efeitos. Com o objetivo geral de otimizar absorção, uma análise estatística foi executada a partir do levantamento de dados operacionais, utilizando todas suas variáveis, sejam as fenomenológicas, como os ruídos, com o objetivo específico de obter modelos empíricos que complementem as simulações fenomenológicas, aumentando sua abrangência. Para a execução da análise estatística, os conjuntos de dados históricos foram levantados e validados pelos balanços coerentes de massa e pela Fotografia, o que tornou possível sua evolução, desde a seleção das variáveis, até estabelecer os modelos de regressão, com os quais pode-se obter um novo modo de controle, que estabiliza a operação, possibilitando a otimização. Em termos ambientais, a utilização destes modelos resulta em redução de até 15% das perdas de acetona para o ambiente, como também de consumo energético, com uma economia da ordem de 1 milhão de reais por ano, sem quaisquer custos adicionais. / Absorption is the key step of the acetone recovery at Filter Tow production, for reducing the acetone emission and improving economics. For this reason it is the subject of this study, including the revision of phenomenological concepts, considering the choice of the best vapor liquid equilibrium model, passing by the improvement of coherent mass balances and establishing the Photography of the original situation, detailing a complex case of transposition of sieve trays to structured packing. However, the operation of the absorption columns is influenced by other variables, with unknown impacts, noises in relation to the phenomenology, justifying the development of this study, for evaluating them. With the general objective of optimizing the absorption, a statistical analysis is performed from collecting operating data, considering all variables, phenomenological and noises, with the specific objective of getting empirical models complementing the phenomenological simulations, increasing their comprising. For performing the statistical analysis sets of historical data have been collected and validated by coherent mass balances and the Photography, making possible its evolution, from the selection of the variables till establishing the regression models, and with them getting a new control way, which stabilizes the operation, allowing the optimization. In environmental terms, the use of these models results in up to 15% decrease in acetone losses to the environment, as well as power consumption with a saving of approximately 1 million reais per year, without any additional costs.

Ethyl lactate (EL) plays a major role as green solvent and also a replacement for most petrochemical solvents. The esterification process of lactic acid and ethanol to produce EL is an equilibrium-limiting reaction and the selective removal of one of the reaction products can be improved using a membrane reactor and when coupled with a heterogeneous catalyst offers an opportunity for process intensification. This thesis investigates the batch process esterification reaction involving lactic acid (LA) and ethanol (EL) in the presence of a water selective membrane using different cation-exchange resin catalysts. The product was analysed using gas chromatograph coupled with mass spectrometry detector (GC-MS). The analytical methods used for the characterisation of the cation-exchange resins and membrane include Fourier transform infrared coupled with attenuated total reflectance (FTIR-ATR), scanning electron microscopy attached to energy dispersive analyser (SEM/EDAX), Liquid nitrogen physisorption and nuclear magnetic resonance (NMR) respectively. A novel method was developed for carrying out esterification reaction in a gaseous phase system using a flat sheet polymeric membrane. Prior to the esterification reaction, different carrier gases were tested with ceramic membrane to determine the suitable carrier gases for the analysis of esterification product. The four carrier gases used for the permeation test were argon (Ar), helium (He), carbon dioxide (CO2) and nitrogen (N2). A 15nm pore size commercially available tubular ceramic support, consisting of 77%Al2O3 and 23%TiO2 with the porosity of 45% was used for the carrier gas investigation. The support was modified with silica based on the sol-gel dip-coating techniques. The dip-coated membrane exhibited a higher molar flux with He (0.046mol m-2s-1) and Ar (0.037mol m-2s-1) with a much lower flux for N2 (0.037mol m-2s-1) and CO2 (0.035 mol m-2s-1) at 0.30 bar. Helium gas with the highest permeation rate were identified as the suitable carrier gas for the analysis of esterification product with GC-MS. The esterification reaction in the presence of four cation-exchange resins to produce ethyl lactate was carried out between 60-160 oC in a batch and membrane processes to determine the effectiveness resin catalysts for LA esterification. The effect of external mass transfer diffusion limitation between the liquid components and the resin catalysts was avoided by increasing the agitation time of the esterification reaction. The percentage conversion rate of the lactic acid feed from the batch process esterification was found to be in the range of 98.6 to 99.8%. The reaction kinetics of the esterification reaction was described based on two simplified mechanisms of Langmuir Hinshelwood model to describe the adsorption components on the surface of the catalysts. The lactic acid feed gave a conversion rate of up to 100 % confirming the effectiveness of the acetate membrane impregnated resin catalysts in the selective removal of water for the separation of ethyl lactate. The significance of producing ethyl lactate through batch process intensified by a water-selective membrane processes can be recommended for industrial LA production.

Applications of Hot Melt Extrusion (HME) in pharmaceuticals have become increasingly popular over the years but nonetheless a few obstacles still remain before wide scale implementation. In many instances these improvements are related to both processing and product performance. It is observed that HME process optimisation is majorly focused on the active pharmaceutical ingredient's (API) properties. Characterising polymeric properties for their suitability in HME should be equally studied since the impact of excipients on both product and process performance is just as vital. In this work, two well-established cellulose ester derivatives: Hydroxy Propyl Methyl Cellulose Acetate Succinate (HPMCAS) and Hydroxy Propyl Methyl Cellulose Phthalate (HPMCP) are studied for their HME suitability. Their thermal, thermodynamic, rheological, thermo-chemical and degradation kinetic properties were evaluated with model plasticisers and APIs. It was found the thermal properties of HPMCP are severely compromised whereas HPMCAS is more stable in the processing zone of 150 to 200 °C. Thermodynamic properties revealed that both polymers share an important solubility parameter range (20-30 MPa P1/2P) where the majority of plasticisers and BCS class II APIs lie. Thus, greater miscibility/solubility can be expected. Further, the processability of these two polymers investigated by rheometric measurements showed HPMCAS possesses better flow properties than HPMCP because HPMCP forms a weak network of chain interactions at a molecular level. However, adding plasticisers such as PEG and TEC the flow properties of HPMCP can be tailored. The study also showed that plasticisers have a major influence on thermo-chemical and kinetic properties of polymers. For instance, PEG reduced polymer degradation with reversal in kinetic parameters whereas blends of CA produced detrimental effects and increased polymer degradation with reduction in onset degradation temperatures. Further, both polymers are observed to be chemically reactive with the APIs containing free -OH, -SOR2RN- and -NH2 groups. Finally, these properties prove that suitability of HPMCP is highly debated for HME and demands great care in use while that of HPMCAS is relatively better than HPMCP in many instances.

Additives, incorporated in film coating formulations, and their process parameters are generally selected using a trial-and-error approach. However, coating problems and defects, especially those associated with aqueous coating systems, indicate the necessity of embracing a quality-by-design approach to identify the optimum coating parameters. In this study, the feasibility of using thermal and rheological measurements to help evaluate and design novel coating formulations has been investigated. Hydroxypropyl methylcellulose acetate succinate (HPMCAS), an enteric coating polymer, was used as the film forming polymer. Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), and Parallel Plate Shear Rheometery (PPSR) were used to evaluate the effect of different plasticisers on the performance of HPMCAS. The results illustrate that, for identical formulations, the DSC and DMA methods yielded up to 40% differences in glass transition temperature (Tg) values. Moreover, Tg measured using loss modulus signals were always 20-30 oC less than those measured using tan delta results in DMA testing. Absolute and relative Tg values can significantly vary depending on the geometry of the samples, clamp size, temperature ramping rate and the frequency of the oscillations. Complex viscosity data for different formulations demonstrated a variable shear thinning behaviour and a Tg independent ranking. It is, therefore, insufficient to rely purely on Tg values to determine the relative performance of additives. In addition, complex viscosity results, obtained using both the DMA and PPSR techniques at similar temperatures, are shown to be comparable. The results from both techniques were therefore used to produce continuous master curves for the HPMCAS formulations. Additionally, step strain tests showed that HPMCAS chains do not fully III disentangle after 105 seconds as predicted by the Maxwell model. Finally, in situ aqueous-based coating experiments proved that mixtures of triethyl acetyl citrate and acetylated monoglyceride (TEAC/AMG), even without cooling of the suspension, do not cause blocking of the spray nozzle whereas triethyl citrate (TEC) based formulae did. TEAC (alone or in a combination with AMG) exhibits superior wettability to HPMCAS than TEC/AMG formulations and can be used to enhance the efficiency and film quality of the dry coating process.

Charakteristisch für Perlcellulose als Regenerat vom Typ Cellulose II sind sphärisch geformte, poröse Partikel mit einer hohen spezifischen Oberfläche und einer guten Bioverträglichkeit. Aufgrund ihrer Eigenschaften sind diese Cellulosemikropartikel besonders gut für medizinische Anwendungen geeignet. Im Mittelpunkt der Arbeit standen Herstellung, Charakterisierung und Modifizierung von Perlcellulosen mit Partikelgrößen von etwa 1 bis10 µm. Im Rahmen der Arbeit wurden zunächst sieben technische Cellulose-2,5-acetate mit vergleichbaren molekularen Eigenschaften auf ihre Eignung zur Herstellung von Perlcellulose nach dem in EP0750007 beschriebenen Acetatverfahren untersucht. Dabei erfolgte der Vergleich verschiedener Eigenschaften. Aus allen untersuchten Celluloseacetaten können Perlcellulosen synthetisiert werden. Als besonders geeignet erwies sich ein Produkt mit einer Molmasse von über 100.000, einem Verhältnis der Molmasse zur numerischen Molmasse von etwa 1,5 und einer guten Löslichkeit in Ethylacetat / Methanol (100:17,5). Die hergestellte Perlcellulose hat eine geringe Partikelgröße und eine relativ enge Größenverteilung. Damit erfüllt dieses Cellulose-2,5-acetat alle Anforderungen für die Synthese von Perlcellulose. Der entscheidende Verfahrensschritt zur Herstellung von Perlcellulose ist das Dispergieren der Emulsion mittels Inline-Ultraturrax. Die Partikelgrößenverteilung hängt im Wesentlichen von den Bedingungen während des Dispergierens ab. Im Rahmen der Arbeit gelang die reproduzierbare Herstellung von Cellulosemicrospheres mit einer Partikelgröße unter 5 µm. Für die Herstellung von Cellulosemikropartikeln mit definierten Eigenschaften ist neben den Synthesebedingungen auch die Charakterisierung der Perlcellulosen von entscheidender Bedeutung. Dafür wurden zunächst etablierte Verfahren verwendet (Partikelgrößenmessung, REM und Quecksilberporosimetrie). Parallel dazu erfolgte die Entwicklung bzw. Einführung neuer Methoden. Im Vordergrund stand die Untersuchung des Sedimentationsverhaltens der Perlcellulosen durch analytisches Zentrifugieren. Davon ausgehend konnte ein Verfahren zur Berechnung der Porosität aus dem Sedimentationsvolumen entwickelt werden. Zum Nachweis der kompletten Deacetylierung der Proben wurde die Ramanspektroskopie genutzt. Durch die Anwendung vorhandener und die Entwicklung neuer Methoden wird die genaue Einstellung von Eigenschaften der Perlcellulosen (z. B. Partikelgröße und deren Verteilung, Morphologie sowie Porosität) ermöglicht und deren Reproduzierbarkeit gewährleistet. Weitere Versuche hatten die Entwicklung von Endotoxinadsorbermaterial auf Basis von Perlcellulose und Polymyxin-B-sulfat (PMB) zum Ziel. Die Kopplung des PMB erfolgte meist nach Aktivierung der Proben mit Epichlorhydrin. Zunächst wurde die eingesetzte Epichlorhydrinmenge variiert, um das Optimum für die Aktivierung der Perlcellulosen zu finden. Weiterhin wurden unterschiedliche Mengen PMB angebunden und die Anbindung an nicht aktivierte Proben untersucht. Die Planung aller Versuche erfolgte jeweils nach Auswertung der an der Donau-Universität Krems durchgeführten Limulus- Amöbocyten- Lysat (LAL)-Tests. Mittels dieser Batchtests wurde die Wirksamkeit des Endotoxinadsorbermaterials sowohl im Vergleich zu unbehandeltem Blutplasma und als auch zu kommerziell erhältlichen Adsorbern auf Polystyrenbasis getestet. Endotoxinadsorber, die bei diesen Tests besonders gut bewertet wurden, konnten in einem up-scale- Versuch erstmals in größeren Mengen synthetisiert werden. Auch die direkte Herstellung von Endotoxinadsorbermaterial aus Perlcelluloseacetat konnte realisiert werden. Bei diesem neu entwickelten Verfahren erfolgen Deacetylierung und Aktivierung in einem Schritt. Damit kann die Herstellung vereinfacht werden. Zur Gewährleistung der Erstfehlersicherheit in extrakorporalen Blutreinigungssystemen sollen magnetisierte Perlcellulosepartikel als bioverträgliche Marker eingesetzt werden. Versuche zur Magnetisierung von Cellulosemikropartikeln während des Herstellungsprozesses zeigten, dass die Einbindung von Magnetit bei Erhalt der sphärischen Partikelstruktur prinzipiell auch auf diesem homogenen Syntheseweg möglich ist. / Bead cellulose is regenerated cellulose II characterized by spherically shaped, porous particles with a high specific surface and a good biocompatibility. Because of their properties these cellulose microspheres are especially suited for medical applications. The focus of this work was the synthesis, characterization and modification of bead cellulose with particle sizes between 1 to 10 µm. In the frame of this work seven technical cellulose-2.5-acetates were investigated with regard to their suitability for making bead cellulose according to the process described in EP0750007. These cellulose acetates have comparable molecular characteristics. Different properties were compared. Bead celluloses can be synthesized from all investigated cellulose acetates. A product with a molecular weight of more than 100,000 and with a ratio between molecular weight and numeric molecular weight of about 1.5 is special suited. This cellulose-2.5-acetate has a good solubility in ethyl acetate / methanol (100:17.5). The bead cellulose made from it has a low particle size and a relative narrow size distribution. Thus this cellulose acetate complies with the requirements for making bead cellulose. The most important process step for making bead cellulose is the dispersing of the emulsion using an inline-ultraturrax. The distribution of particle size depends mainly on the conditions during dispersing. A reproducible synthesis of cellulose microspheres with a particle size range below 5 µm was successfully achieved. In addition to determining conditions for manufacturing bead cellulose the characterization of the microspheres is essential to obtain bead cellulose with well defined properties. At first well-established methods of characterization were used (particle size measurement, SEM and mercury porosimetry). In parallel new methods were developed and implemented. The main focus was the investigation of sedimentation behaviour of bead cellulose using analytical centrifugation. Based on this knowledge of the sedimentation volume a new method to calculate the porosity was designed. Raman spectroscopy was used for detecting the complete deacetylation of the samples. By using well-established and newly developed methods properties of bead cellulose such as particle size and distribution, morphology and porosity can be accurately adjusted. In this way the reproducible synthesis of cellulose microspheres can be ensured. The aim of further experiments was to develop an endotoxin adsorber material based on a coupling of bead cellulose with Polymyxin B sulfate (PMB). The coupling with PMB was carried out after activation of the samples by using epichlorohydrin. At first the added epichlorohydrin amount was diversified in order to find the optimum for the activation of bead cellulose. Later the coupling of different amounts of PMB took place and the linking of PMB to non activated samples was investigated too. The planning of all experiments occurred after evaluation of Limulus amebocyte lysate (LAL) tests at Danube-University Krems. Using these batch tests the effectiveness of the endotoxin adsorber material was tested compared to untreated blood plasma as well as commercial available adsorbers based on polystyrene. Endotoxin adsorbers showing the best adsorption rate were then synthesized for the first time in larger quantities. Also the direct synthesis of endotoxin adsorber material based on bead cellulose acetate could be realized. Using this newly developed method, deacetylation and activation occur during the same step. This means manufacturing process can be simplified. Using magnetized bead cellulose as biocompatible marker particles is planned to achieve first fault safety in case of a membrane rupture during extracorporeal blood purification. Initial tests have shown that the magnetization of cellulose microspheres is possible during the manufacturing process. The incorporation of magnetite can be realized while keeping the spherical shape of the particles using this homogenous synthesis pathway.

Lors de la production industrielle du biocarburant éthyl tert-butyl éther (ETBE), cet éther forme un azéotrope contenant 20 % d'éthanol. Comparé à la distillation ternaire utilisée pour la purification de l'ETBE, le procédé membranaire de pervaporation pourrait offrir une alternative intéressante et d'importantes économies d'énergie. Des membranes cellulosiques ont principalement été décrites pour cette application. En particulier, la sélectivité de l'acétate de cellulose (CA) était extrêmement élevée mais son flux trop faible. Dans cette thèse, différentes stratégies de greffage ont été explorées pour améliorer ses propriétés membranaires. La première a mis en œuvre la chimie "click" pour le greffage d'oligomères polylactide, conduisant à des membranes bio-sourcés originales pour cette application. Le greffage de liquides ioniques (LIs) a ensuite été étudié, initialement par chimie "click" (échec dû à des réactions secondaires) puis par une autre stratégie en 2 étapes impliquant une simple substitution nucléophile. Une seconde série de matériaux cellulosiques a été obtenue avec des LIs contenant un même anion bromure et différents cations (imidazolium, pyridinium ou ammonium) de polarité croissante. Une troisième série de nouveaux matériaux membranaires a ensuite été développée en échangeant l'anion bromure par différents anions Tf2N-, BF4-, and AcO-. Les propriétés membranaires de tous les matériaux greffés ont finalement été évaluées sur la base du modèle de sorption-diffusion, révélant que la sorption et la pervaporation étaient conjointement améliorées par les différentes stratégies de greffage développées. / During the industrial production of ethyl tert-butyl ether (ETBE) biofuel, this ether forms an azeotropic mixture containing 20 wt% of ethanol. Compared to the ternary distillation currently used for ETBE purification, the pervaporation membrane process could offer an interesting alternative and important energy savings. Cellulosic membranes have been mainly reported for this application. In particular, the selectivity of cellulose acetate (CA) was outstanding but its flux was too low. In this work, different grafting strategies were developed for improving the CA membrane properties for ETBE purification. The first strategy used "click" chemistry to graft CA with polylactide oligomers leading to original bio-based membranes for the targeted application. The grafting of ionic liquids onto CA was then investigated first by "click" chemistry (unsuccessful due to side reactions) and then by another two-step strategy implying simple nucleophilic substitution. A second series of cellulosic materials was obtained by grafting different ionic liquids containing the same bromide anion and different cations (imidazolium, pyridinium or ammonium) with increasing polar feature. A third series of new membrane materials was finally developed by exchanging the bromide anion with different anions Tf2N-, BF4-, and AcO-. The membrane properties of all grafted CA membranes were finally assessed on the basis of the sorption-diffusion model, which revealed that both sorption and pervaporation properties were improved by the different grafting strategies

Submitted by ROBSON ROSA DA SILVA (robsilva31@gmail.com) on 2016-07-04T18:50:31Z No. of bitstreams: 1 Silva_2016_New photonic structures_Self assembly of 1D Te structures_Multifunctional biopolymers and reused plastics.pdf: 40718449 bytes, checksum: 9c299b328a4a54c169de6647b0225f34 (MD5) / Approved for entry into archive by Ana Paula Grisoto (grisotoana@reitoria.unesp.br) on 2016-07-07T17:57:07Z (GMT) No. of bitstreams: 1 silva_rr_dr_araiq_par.pdf: 1063262 bytes, checksum: cc72dc79773da734cac767490756f56e (MD5) / Made available in DSpace on 2016-07-07T17:57:07Z (GMT). No. of bitstreams: 1 silva_rr_dr_araiq_par.pdf: 1063262 bytes, checksum: cc72dc79773da734cac767490756f56e (MD5) Previous issue date: 2016-05-23 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Nanoestruturas unidimensionais de telúrio (Te1D) na forma de whiskers, fios e hélices foram preparados com facilidade por uma síntese em etapa única na presença de solução aquosa de Pluronic® F68 à baixas temperaturas (< 100 °C) e pressão ambiente. A forma das nanoestruturas puderam ser controladas de acordo com a cinética da reação. Estruturas empacotadas de nanowhiskers e nanofios de Te foram obtidas via auto-organização em interface líquido-líquido e pela técnica de drop-cast em substrato de Si/SiO2. Estruturas híbridas 1D foram obtidas utilizando nanoestruturas Te1D como molde de sacrifício para anexar nanopartículas metálicas ou mesmo produzir nanoestruturas 1D metálicas. Por exemplo, nanoestruturas híbridas 1D foram preparadas decorando nanofios de Te com nanopartículas de Ag em solução aquosa de poli(vinilpirrolidona). Nanoestruturas 1D de Au com forma de nódulos foram preparados por deslocamento galvânico de íons Au3+ em uma mistura de nanohélices de Te, ácido ascórbico e solução aquosa de poli(vinilpirrolidona). Além disso, nanohélices de Te foram funcionalizadas com uma camada resina resorcinol-formaldeído em condições brandas de síntese. A resina de resorcinol-formaldeído é uma via intermédia para explorar a deposição de compostos opticamente ativos tais como nanopartículas de hidroxicarbonato de Tb3+ ou nanopartículas de Au. Para aplicações práticas é essencial que estas nanoestruturas possam ser suportadas em filmes rígidos ou flexíveis de alta qualidade óptica. Filmes de polímeros naturais puros e filmes híbridos de sol-gel epóxi foram avaliados como potenciais matrizes hospedeiras para luminóforos. A fabricação de híbridos é baseada na incorporação de 3-glicidoxipropiltrimetoxissilano na solução homogênea de polímero natural com posterior secagem sobre uma superfície plana. Particularmente, filmes flexíveis de fibroína da seda e acetato de celulose e os seus híbridos derivados exibiram excelentes propriedades ópticas para hospedar compostos opticamente ativos. Por exemplo, compostos de Eu3+ emissores na região do vermelho e corantes fluorescentes foram incorporados em matriz pura de polímero e híbridos epóxi e suas propriedades ópticas foram investigadas. Laser de corantes por feedback distribuído (DFB) foram fabricados dopando grades de difração de fibroína de seda com Rodamina 6G. Devido a sua capacidade de replicar superfícies padronizadas com resolução nanométrica, grades de fibroina da seda dopadas com corante foram depositadas contra a grade de difração de uma mídia de disco compacto comercial. Lasers modificados de DFB baseados em filmes de fibroina contendo nanopartículas espalhadoras de luz de SiO2 e Ag aleatoriamente distribuídas na grade de fibroina demonstraram aumento da intensidade do laser, além de estreitamento da largura do pico de emissão. Filmes híbridos flexíveis e transparentes (> 85%) de fibroina da seda e acetato de celulose modificados com função epóxi e contendo compostos fluorescentes na região do vermelho como complexos β-dicetonato de Eu3+ e nanopartículas de YVO4:Eu3+ em baixa proporção relativa mássica (<5%) foram preparados. De maneira geral, o resultado são filmes homogêneos com funções epoxi e/ou alcoxissilano não hidrolisados disponíveis para outras modificações químicas. Devido a matéria-prima limitada de polímeros naturais para uma alta demanda de fabricação de dispositivos ópticos, é igualmente importante desenvolver materiais com base na reutilização de polímeros sintéticos. Filmes finos de poliestireno foram concebidos por dissolução de poliestireno expandido (EPS) recuperado de resíduos em D-limoneno, um solvente verde proveniente de óleos cítricos. Filmes transparentes dopados com complexos β-dicetonato de Eu3+ demonstraram excelente transparência e aptos para uso em guias de luz. Estes resultados são motivadores para a) a engenharia de nanoestruturas 1D com propriedades ópticas sintonizáveis bem como, b) desenvolvimento de híbridos flexíveis e transparentes baseados em híbridos de polímeros naturais com alta funcionalidade química ou polímeros sintéticos reciclados como potenciais matrizes hospedeiras ópticas almejadas em aplicações fotônicas. / One-dimensional Te nanostructures (Te1D) in the shape of whiskers, wires and helices were prepared by a facile one-pot synthesis in the presence of aqueous Pluronic® F68 solution at low temperatures (< 100 ºC) and ambient pressure. The shape of Te1D nanostructures could be manuvered according with the reaction kinectics. We evaluate some techniques to assemble Te1D nanostructures on the pursuit for complex nanoarchitectures. Bundles of Te nanowhiskers and nanowires were achieved by self-assembly in liquid-liquid interface or by drop-cast technique in Si/SiO2 substrates. 1D hybrid structures have been conceived by using Te1D nanostructures as sacrificial template to attach metallic nanoparticles or even produce metallic 1D nanostructures. For example, 1D hybrid nanostructures were easily prepared by decorating Te nanowires with Ag nanoparticles in aqueous solution of poly(vinylpyrrolidone). Au 1D nanostructures with nodular-like shape were prepared by galvanic displacement of Au3+ ions in a mixture of Te nanohelices, ascorbic acid and an aqueous solution of poly(vinylpyrrolidone). Furthermore, Te1D nanohelices were functionalized with a layer of resorcinol-formaldehyde resin at mild synthesis conditions. The RF resin allowed us to fashion an intermediate pathway to explore the deposition of optically active compounds like Tb3+ hydroxylcarbonate or Au nanoparticles. Seeking practical applications, these nanostructures should be hosted over rigid or flexible films possessing excellent optical properties. Pure natural polymers and epoxy sol-gel hybrids films were evaluated as potential host for luminophors. The fabrication of epoxy hybrids is based on the incorporation of 3-glycidoxypropyltrimethoxysiloxane on the homogenous solution of natural polymer with subsequent casting over flat surface. Particularly, flexible silk fibroin and cellulose acetate films and their derivative hybrids displayed excellent optical properties to host optically active compounds. For instance, red emitting Eu3+ compounds and fluorescent dyes were hosted on pure natural polymer and hybrid films and the optical features of the luminescent films were investigated thoroughly. Distributed feedback dye-lasers were fabricated by doping silk fibroin diffraction gratings with Rhodamine 6G. Owing its ability to mimic patterned surfaces at nanoscale resolution, dye-doped SF gratings were fabricated using replica-casting patterning against a commercial blank digital versatile disc as template. A modified DFB Laser based on SF films with Ag or SiO2 light scattering particles randomly distributed on the grating unveiled an enhancement of laser intensity withal narrowing of emission peak linewidth. Flexible and highly transparent SF- and CA-epoxy hybrids (> 85%) containing red fluorescent Eu3+ b-diketonate complex and YVO4:Eu3+ nanoparticles at low relative content (< 5 wt%) were tailored. In general, the outcome is homogeneous films with epoxy and/or unhydrolized alkoxysilane functions available for further chemical modification. Owing the limited feedstock of natural polymers for high demanding production of optical devices, it is equally important develop materials based on the reuse of synthetic polymers. Thin films of polystyrene were conceived by dissolving waste-recovered expanded-polystyrene (EPS) in D-limonene, a green solvent from citrus oil. Transparent EPS films doped with Eu3+ b-diketonate complex displayed excellent transparency and light waveguiding, These assertions provide a framework that motivates the research on a) engineering of 1D hybrids nanostructures with tunable optical properties and b) flexible natural polymer/epoxy hybrid with enhanced functionality or plastic recycled as potential optical hosts sought in photonic applications. / FAPESP: 2013/12367-6

A absorção é a etapa determinante da recuperação de acetona no Filter Tow, por reduzir a emissão de acetona e trazer melhorias à economia. Por isso, ela constitui o objeto deste estudo, que inclui desde a revisão dos conceitos fenomenológicos, considerando a escolha do melhor modelo de equilíbrio líquido-vapor, passando pela execução dos balanços coerentes de massa e o estabelecimento da Fotografia da situação original, relatando um caso complexo de transposição de pratos para recheios. Contudo, a operação das colunas de absorção é influenciada por outras variáveis de caráter desconhecido, ruídos em relação à fenomenologia, o que se pretende avaliar, justificando-se desenvolver estudo para avaliar seus efeitos. Com o objetivo geral de otimizar absorção, uma análise estatística foi executada a partir do levantamento de dados operacionais, utilizando todas suas variáveis, sejam as fenomenológicas, como os ruídos, com o objetivo específico de obter modelos empíricos que complementem as simulações fenomenológicas, aumentando sua abrangência. Para a execução da análise estatística, os conjuntos de dados históricos foram levantados e validados pelos balanços coerentes de massa e pela Fotografia, o que tornou possível sua evolução, desde a seleção das variáveis, até estabelecer os modelos de regressão, com os quais pode-se obter um novo modo de controle, que estabiliza a operação, possibilitando a otimização. Em termos ambientais, a utilização destes modelos resulta em redução de até 15% das perdas de acetona para o ambiente, como também de consumo energético, com uma economia da ordem de 1 milhão de reais por ano, sem quaisquer custos adicionais. / Absorption is the key step of the acetone recovery at Filter Tow production, for reducing the acetone emission and improving economics. For this reason it is the subject of this study, including the revision of phenomenological concepts, considering the choice of the best vapor liquid equilibrium model, passing by the improvement of coherent mass balances and establishing the Photography of the original situation, detailing a complex case of transposition of sieve trays to structured packing. However, the operation of the absorption columns is influenced by other variables, with unknown impacts, noises in relation to the phenomenology, justifying the development of this study, for evaluating them. With the general objective of optimizing the absorption, a statistical analysis is performed from collecting operating data, considering all variables, phenomenological and noises, with the specific objective of getting empirical models complementing the phenomenological simulations, increasing their comprising. For performing the statistical analysis sets of historical data have been collected and validated by coherent mass balances and the Photography, making possible its evolution, from the selection of the variables till establishing the regression models, and with them getting a new control way, which stabilizes the operation, allowing the optimization. In environmental terms, the use of these models results in up to 15% decrease in acetone losses to the environment, as well as power consumption with a saving of approximately 1 million reais per year, without any additional costs.

Made available in DSpace on 2014-07-29T15:22:52Z (GMT). No. of bitstreams: 1 Adriane Alexandre Machado de Melo - Ciencia e Tecnologia de Alimentos.pdf: 736032 bytes, checksum: 4d9373fbcfce810096e5aded3a6b98be (MD5) Previous issue date: 2010-08-20 / The chilled chicken is highly perishable food that requires the application of conservation and storage methods. Studies on packaging that are able not only to protect, but also to interact with the food have been increasing, as antimicrobial packaging for example that, due to the presence of preservatives, are able to retard or inhibit the growing of microorganisms in the packed product. The objectives of this study were to develop biodegradable packaging embedded with natural antimicrobial agent (active film); assess its mechanical properties and its effect in vitro on the mesophilic microorganisms and assess the counts of psychrotrophic and total coliforms and the physical and chemical characteristics of chilled chicken packed in it. It was produced cellulose-based active films embedded with different concentrations (10, 20, 30, 40 and 50%, v/w) of rosemary (Rosmarinus officinalis L.) essential oil and analysis of variance and mean comparison tests (Tukey p<0.05) were performed on the results. Films embedded with 10, 20 and 30% were shown to be the most resistant ones, and the films with 10 and 20% were also the hardest ones, while the elongation weren´t shown to have variation among treatments. In vitro analysis of the films showed that the concentrations between 10 and 20% of essential oil were necessary in order to reduce the growing of mesophilic collected in samples of chicken chest and that the microbial growth on the films was the same of the four biggest concentrations. However, films embedded with 20% of essential oil and alternated in samples of chicken chest didn´t show any significant effect on the control of psychrotrophic microorganisms or total coliforms during the storage period (9 days, 2 ± 2ºC), but films embedded with 50% of essential oil were shown to be efficient on the control of microorganisms growth of coliform groups, during the storage of the samples (6 days, 2 ± 2ºC), without color alteration. The essential oil of rosemary concentration on the films influenced its mechanical properties and also affected the mesophilic microorganisms growth in vitro and, with 50% the film reduced the coliforms growth in chilled chicken chest. / A carne de frango resfriada é um alimento bastante perecível, sendo necessária aplicação de métodos de conservação e armazenamento. O estudo de embalagens capazes não só de proteger, mas também de interagir com o alimento é uma crescente, sendo um exemplo as embalagens antimicrobianas, que devido à presença de conservantes, são capazes de retardar ou inibir o crescimento de micro-organismos no produto embalado. Diante disto, o objetivo desta pesquisa foi desenvolver embalagem biodegradável incorporada com agente antimicrobiano natural (filme ativo), avaliar suas propriedades mecânicas e seu efeito in vitro sobre o crescimento de mesófilos e avaliar a contagem de psicrotróficos e coliformes totais e as características físicas e químicas de peitos de frango resfriados nele acondicionados. Foram produzidos filmes ativos a base de celulose incorporados com diferentes concentrações (10, 20, 30, 40 e 50%, v/p) de óleo essencial de alecrim (Rosmarinus officinalis L.) e os resultados foram submetidos à análise de variância e teste para comparação de médias (Tukey, p<0,05). Filmes incorporados com 10, 20 e 30% se mostraram os mais resistentes, sendo que os filmes com 10 e 20% foram, também, os mais rígidos, enquanto a elongação não variou entre os tratamentos. A análise in vitro dos filmes revelou que uma concentração entre 10 e 20% de óleo essencial foi requerida para reduzir o crescimento dos mesófilos coletados de amostras de peito de frango, e que o crescimento microbiano sob os filmes foi o mesmo nas quatro maiores concentrações. Contudo, filmes incorporados com 20% de óleo essencial e intercalados em amostras de peito de frango não mostraram efeito significativo no controle de micro-organismos psicrotróficos ou coliformes totais durante o período de armazenamento (9 dias, 2 ± 2ºC), mas filmes incorporados com 50% de óleo essencial mostraram-se eficientes no controle do crescimento de micro-organismos do grupo coliformes, durante o armazenamento das amostras (6 dias, 2 ± 2ºC), sem alterar a cor das mesmas. A concentração de óleo essencial de alecrim nos filmes influenciou suas propriedades mecânicas e afetou o crescimento de micro-organismos mesófilos in vitro e, a 50%, o filme reduziu o crescimento de coliformes em peito de frango resfriado.

Made available in DSpace on 2017-07-10T18:08:20Z (GMT). No. of bitstreams: 1 Andreine Aline Roos.pdf: 2960540 bytes, checksum: 99bd1c80529add7a7c94dc586e17b240 (MD5) Previous issue date: 2013-02-22 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Environmental contamination is a serious problem in today's society and for years aroused the interest of researchers. The pollutants with pharmacological activity are worrying the scientific community by increasing detection of these aquatic environments at concentrations ranging from µ L-1 to ng L-1, which are resistant to conventional treatments used in sewage treatment plants. Thus, it becomes necessary to investigate more effective treatments to minimize environmental contamination. The Advanced Oxidation Processes have attracted interest as promising treatments for removal of organic pollutants, among which stands out the heterogeneous photocatalysis whose the main drawback is the difficulty of separating the catalyst from solution degraded. To try to solve the problem, this work proposes the use of cellulose acetate/TiO2 composite and zinc metal plate coated with ZnO as catalysts for photodegradation of sulfamethoxazole. The composite was prepared by phase inversion of a solution of cellulose acetate and titanium tert-butyl orthotitanate that resulted in a composite with around 4% (in mass %) if TiO2.This composite proved not to be efficient in the degradation of sulfametoxazol in the presence of hydrogen peroxide under both, sunlight or artificial radiation. For this reason the continuity of the work occurred only with zinc plate coated with ZnO obtained by hydrothermal method. The 22 factorial experimental design, with triplicate on central point showed that the model was valid, and that the process was favored with increasing amounts of H2O2 at acidic pH. The equilibrium time for the photodegradation of sulfametoxazol using a plate Zn/ZnO was 120 minutes with removal of 95%, under artificial radiation, obeying the rate law of peudo-first order. The COD and nitrate concentration indicated that there was a small mineralization of the pollutant, despite the high removal, showing that there was probably the formation of intermediate species. Furthermore, the Zn/ZnO showed a catalytic efficiency almost unchanged up to 10 repetitions of photodegradation. However, at the end of the process the zinc concentration in the sample was above the allowed degraded by environmental agencies, necessitating the use of a post-treatment for removal of zinc or use of sulfametoxazol solution with pH closer to neutrality to avoid dissolution of the metal catalyst. / A contaminação ambiental é um grave problema da sociedade atual e há anos desperta o interesse dos pesquisadores. Os poluentes com atividade farmacológica vêm preocupando a comunidade científica pela crescente detecção dos mesmos em ambientes aquáticos, em concentrações que variam de µg L-1 a ng L-1, os quais são resistentes aos tratamentos convencionais empregados nas estações de tratamento de esgoto. Dessa forma, torna-se necessário a investigação de tratamentos mais eficientes para minimizar a contaminação ambiental. Os Processos Oxidativos Avançados vêm despertando interesse como tratamentos promissores para remoção de poluentes orgânicos, dentre os quais destaca-se a fotocatálise heterogênea, cujo principal empecilho é a dificuldade de separação do catalisador da solução degradada. Para tentar solucionar o problema, o trabalho propõe a utilização de catalisadores diferenciados como, compósito acetato de celulose/TiO2 e uma placa de zinco metálico recoberto com ZnO para a fotodegradação do princípio ativo sulfametoxazol. Contudo, o compósito acetato de celulose/ TiO2 não apresentou a eficiência similar ao TiO2 como era esperado, e assim optou-se por prosseguir os estudos de fotocatálise heterogênea utilizando a placa de zinco recoberta com ZnO como catalisador. O planejamento experimental fatorial, 22 com triplicata no ponto central, mostrou que o modelo utilizado foi válido, e que o processo é favorecido com quantidades maiores de H2O2 em pH ácido. O tempo de equilíbrio para a fotodegradação do sulfametoxazol utilizando a placa de Zn recoberta com ZnO foi de 120 minutos com remoções de 95%, sob radiação artificial, seguindo uma lei de velocidade de pseudo-primeira ordem. A determinação de DQO e da concentração de nitrato indicaram que houve uma pequena mineralização do poluente, apesar da elevada remoção, mostrando que provavelmente houve a formação de espécies intermediárias. Além disso, a placa de zinco recoberta com ZnO apresentou uma eficiência catalítica praticamente inalterada em até 10 repetições de fotodegradação. No entanto, ao final do processo a concentração de zinco na amostra degradada estava acima da permitida pelos órgãos ambientais, sendo necessário a utilização de um pós-tratamento para a remoção do zinco ou a utilização de solução de sulfametoxazol com pH mais próximo da neutralidade para evitar a dissolução do metal do catalisador.