<p>In electrochemical oxidation treatment of wastewater, the electrode material is an important parameter in optimizing oxidative electrochemical processes, since the mechanism and products of several anodic reactions are known to depend on the anode material. The electrochemical oxidation of benzaldehyde, nitrobenzene and m-cresol on bare boron-doped diamond (BDD) electrode was investigated. Cytochrome c was then electrochemically immobilsed onto the functionalized BDD electrode by cyclic voltammetry. Oxidation and reduction reaction mechanism of each flavonoid was studied. There was one oxidation and reduction peaks for quercitin and catechin respectively, and two oxidation and two reduction peaks for rutin. The cytochrome c modified BDD electrode showed good sensitivity for all three flavonoids and low detection limits i.e. 0.42 to 11.24 M as evaluated at oxidation and reduction peaks, respectively.</p>

<p>In this study two medicinal plant species, namely Galenia africana and Elytropapus rhinocerotis, the former belonging to the family Aizoceae and the latter belonging to the family Asteraceae, have been investigated and different compounds isolated and characterized. Both species are important plants used in traditional medicine in Africa and particularly in South Africa. Flavanoids are secondary metabolites found in plants. They have a protective function against UV radiation and have a defence against invading illnesses due to their important antioxidant activity. Much of the food we eat and some beverages we drink contain flavonoids. The aim of this study was to investigate the electrochemistry of flavanoids isolated from these species.</p>

<p>Coeliac disease (CD) is a gluten intolerance condition that results in the flattening of the villi, which line the bowel. It is the most common cause of malabsorption of food nutrients. This inability to absorb sufficient levels of nutrients causes many of the common symptoms experienced by CD patients. Some of the symptoms, which lead to an increase in mortality rate, include chronic diarrhea, fatigue, iron-deficient anemia and osteoporosis. People with CD have higher than normal levels of certain antibodies in their blood. Thus, the concentration of anti-transglutaminase antibody (anti-tTG) in human sera is an important analytical marker for the diagnosis of CD. An immunosensor is a type of biosensor that has an antigen or antibody fragment as its biological recognition component. The specificity of the molecular recognition of antigens by antibodies to form a stable complex is the basis of immunosensor technology. In this work, overoxidized polypyrrole (OvoxPpy) was electrosynthesized as a noval sensor platform on a glassy carbon electrode (GCE). The OvoxPpy was then doped with gold-nanoparticles (GNP) by electrodeposition using cyclic voltammetry to form GNP|OvoxPpy||GCE electrode system. Morphology and size of the GNP|OvoxPpy||GCE nanocomposite were determined using scanning electron microscopy. The electrochemical immunosensor for anti-tTG antibodies was prepared by immobilizing transglutaminase antigen (tTG-antigen) onto the GNP|OvoxPpy||GCE by drop coating and allowed to incubate for 2 hrs. The electrochemical characterization of the nanocomposite platform and immunosensor were studied by voltammetry and electrochemical impedance spectroscopy (EIS)...</p>

In the current study, we give a report when oxalic acid was used as an electrolyte to synthesize an AAO template with hexagonal pore array. Optimum parameters were observed as 0.4 M of oxalic acid, anodizing voltage of 45 V, temperature of approximately 8 °C and the period of 120 minutes. Atomic force microscope (AFM) and High resolution scanning electron microscope (HRSEM) showed that template has an average pore diameter of 103 nm. Co and MnOx (x = 1,2) nanostructures were selectively deposited in the pores of the template using a novel atomic layer deposition (ALD) technique. The diameter sizes and the array of the nanostructures and the template were corresponding. Energy dispersive xrays (EDX) and X-ray photoelectron spectroscopy (XPS) confirmed the presence of Co and MnOx (x =1,2) on the samples while x-ray diffraction (XRD) provided an indication of their orientations. Magnetic force microscopy as main characterization tool showed the existence of multi-domains on both Co and MnOx (x =1,2) nanostructures.

A novel cyclopentadienylruthenium(II) thiolato Schiff base, [Ru(SC6H4NC(H)C6H4OCH2CH2SMe)(&eta / 5-C2H5]2 was synthesized and deposited as a selfassembled monolayer (SAM) on a gold electrode. Effective electronic communication between the Ru(II) centers and the gold electrode was established by electrostatically cycling the Shiff base-doped gold electrode in 0.1 M NaOH from -200 mV to +600 mV. The SAMmodified gold electrode (Au/SAM) exhibited quasi-reversible electrochemistry. The integrity of this electro-catalytic SAM, with respect to its ability to block and electro-catalyze certain Faradaic processes, was interrogated using Cyclic and Osteryoung Square Wave voltammetric experiments. The formal potential, E0', varied with pH to give a slope of about - 34 mV pH-1. The surface concentration, &Gamma / , of the ruthenium redox centers was found to be 1.591 x 10-11 mol cm-2. By electrostatically doping the Au/SAM/Horseradish peroxidase at an applied potential of +700 mV vs Ag/AgCl, a biosensor was produced for the amperometric analysis of hydrogen peroxide, cumene hydroperoxide and tert-butylhydroperoxide. The electrocatalytic-type biosensors displayed typical Michaelis-Menten kinetics with their limits of detection of 6.45 &mu / M, 6.92 &mu / M and 7.01 &mu / M for hydrogen peroxide, cumene hydroperoxide and tert-butylhydroperoxide respectively.

The main objective of this work was to develop simple and sensitive electrochemical sensors for the detection of bisphenol A. To investigate the electrochemical behavior of BPA on a bare glassy carbon electrode. To apply the developed biosensor for the determination BPA by differential pulse voltammetry, electrochemical impedance spectrometry, square wave voltammetry and steady-state amperometry. To characterize the synthesized PDMA-PSS by cyclic voltammetry (CV), UV-Vis spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM).

<p>One of the most powerful aspects of conducting polymers is their ability to be nanostructured through innovative, synthetically manipulated, transformations, such as to tailor-make the polymers for specialized applications. In the exponentially increasing wide field of nanotechnology, some special attention is being paid to innovative hybrid dendrimer-core based polymeric smart materials. Star copolymers are a class of branched macromolecules having a central core with multiple linear polymer chains extending from the core. This intrinsic structural feature yields a unique 3D structure with extended conjugated linear polymer chains, resulting in star copolymers, which have higher ionic conductivities than their corresponding non-star conducting polymer counterparts. In this study an in-depth investigation was carried out into the preparation and characterization of specialized electronic &lsquo / smart materials&rsquo / . In particular, the preparation and characterization of novel conducting dendrimeric star copolymers which have a central poly(propylene imine) (PPI) dendrimer core with conducting polypyrrole (PPy) chains extending from the core was carried out. This involved, first, the preparation of a series of dendrimeric polypyrrole poly(propylene imine) star copolymers (PPI-co-PPy), using generations 1 to 4 (G1 to G4) PPI dendrimer precursors. The experimental approach involved the use of both chemical and electrochemical synthesis methods. The basic procedure involved a condensation reaction between the primary amine of a diamino functional PPI dendrimer surface and 2-pyrrole aldehyde, to afford the pyrrole functionalized PPI dendrimer (PPI-2Py). Polymerization of the intrinsically contained monomeric Py units situated within the dendrimer backbone was achieved via two distinctly different routes: the first involved chemical polymerization and the second was based on potentiodynamic oxidative electrochemical polymerization. The star copolymers were then characterized using various sophisticated analytical techniques, in-situ and ex-situ. Proton nuclear magnetic resonance spectroscopy (1HNMR) and Fourier transform infrared spectroscopy (FTIR) were used to determine the structures. Scanning electron microscopy (SEM) was used to determine the morphology. Themogravimetric analysis (TGA) was used to study the thermal stability of the prepared materials. X-ray diffraction analysis (XRD) was used to study the structural make-up of phases, crystallinity and amorphous content. Hall effect measurements were carried out to determine the electrical conductivity of the chemically prepared star copolymers. The PPI-co-PPy exhibited improved thermal stability compared to PPI-2Py, as confirmed by TGA. SEM results showed that the surface morphology of the functionalized dendrimer and star copolymer differed. The surface morphology of the chemically prepared star copolymers resembled that of a flaky, waxy material, compared to the ordered morphology of the electrochemically grown star copolymers, which resembled that of whelk-like helixes. In the case the electrochemically grown star copolymers, SEM images recorded at higher magnifications showed that the whelk-like helixes of the star copolymers were hollow tubes with openings at their tapered ends, and had an average base diameter of 2.0 &mu / m. X-ray diffraction analysis of the first generation star copolymer G1PPI-co-PPy revealed a broadly amorphous structure associated with PPy, and crystalline peaks for PPI. Cyclic voltammetry (CV), square wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS) techniques were used to study and model the electrochemical reactivity of the star copolymer materials. Electrochemical impedance spectroscopy data showed that the G1PPI-co-PPy exhibited slightly higher ionic conductivity than pristine PPy in lithium perchlorate. The second generation star copolymer G2PPI-co-PPy electrochemically deposited on a platinum (Pt) electrode had a lower electrochemical charge transfer resistance compared to electrodeposited polypyrrole (PPy) on a Pt electrode, and bare Pt. The decrease in charge transfer resistance was attributed to an increase in the conjugation length of the polymer as a result of the linking of the highly conjugated PPy to the PPI dendrimer. Bode impedimetric analysis indicated that G2PPI-co-PPI was a semiconductor, with a maximum phase angle shift of 45.3&deg / at 100 MHz. The star copolymer exhibited a 2- electron electrochemistry and a surface coverage of 99%. Results of Hall effect measurements showed that the star copolymer is a semiconducting material, having a conductivity of 0.7 S cm-1, in comparison to the 1.5 S cm-1 of PPy. To the best of my knowledge, these new star copolymers have not been reported in the open literature. Their properties make them potentially applicable for use in biosensors.</p>

A novel cyclopentadienylruthenium(II) thiolato Schiff base,[Ru(SC6H4NC(H)C6H4OCH2CH2SMe)(η5-C2H5]2 was synthesized and deposited as a selfassembled monolayer (SAM) on a gold electrode. Effective electronic communication between the Ru(II) centers and the gold electrode was established by electrostatically cycling the Shiff base-doped gold electrode in 0.1 M NaOH from -200 mV to +600 mV. The SAMmodified gold electrode (Au/SAM) exhibited quasi-reversible electrochemistry. The integrity of this electro-catalytic SAM, with respect to its ability to block and electro-catalyze certain Faradaic processes, was interrogated using Cyclic and Osteryoung Square Wave voltammetric experiments. The formal potential, E0', varied with pH to give a slope of about - 34 mV pH-1. The surface concentration, Γ, of the ruthenium redox centers was found to be 1.591 x 10-11 mol cm-2. By electrostatically doping the Au/SAM/Horseradish peroxidase at an applied potential of +700 mV vs Ag/AgCl, a biosensor was produced for the amperometric analysis of hydrogen peroxide, cumene hydroperoxide and tert-butylhydroperoxide. The electrocatalytic-type biosensors displayed typical Michaelis-Menten kinetics with their limits of detection of 6.45 μM, 6.92 μM and 7.01 μM for hydrogen peroxide, cumene hydroperoxide and tert-butylhydroperoxide respectively / Magister Scientiae - MSc

The field of bioenergetics deals with the flow and transformation of energy within and between living organisms and their environment. The work presented in this thesis report focuses on cellular respiration and more specifically on the first enzyme of the respiratory chain, NADH:ubiquinone oxidoreductase (Complex I). This was done to clarify details about its function and its implication in disease. First, the creation of a sensor involving the biomimetically immobilized enzyme is presented and probed through a combination of surface enhanced infrared absorption spectroscopy (SEIRAS) and electrochemistry. This sensor is then tested against different substrates and inhibitors. In a second part, the interaction of Complex I with lipids, inhibitors (Zn2+ and NADH-OH) and the role of a Tyrosine residue situated in the NADH binding pocket are investigated through electrochemically induced UV-Vis and FTIR difference spectroscopies. The results gathered through these experiments are then explored under a structural perspective and a coupling mechanism between quinone reduction and proton translocation by Complex I is proposed.

ABSTRACT CARBON SUPPORTED AND SURFACTANT STABILIZED METAL NANOPARTICLE CATALYSTS FOR DIRECT METHANOL FUEL CELLS &Ccedil / elik, &Ccedil / aglar M.S., Department of Chemistry Supervisor: Assoc. Prof. Dr. G&uuml / ls&uuml / n G&ouml / kaga&ccedil / August 2005, 72 pages Carbon supported surfactant, such as 1-decanethiol and octadecanethiol, stabilized platinum and platinum/ruthenium species have been prepared recently. In this thesis, for the first time, 1-hexanethiol has been used as an organic stabilizer for the preparation of carbon supported platinum and platinum/ruthenium nanoparticle catalysts. These new catalysts were employed for methanol oxidation reaction, which were used for direct methanol fuel cells. Cyclic voltammetry, X-ray photoelectron spectroscopy and transmission electron microscopy have been used in order to determine the nature of the catalysts. The effect of temperature and time on catalytic activity of catalysts were examined and the maximum catalytic activity was observed for carbon supported 1-hexanethiol stabilized platinum nanoparticle catalyst (with 1:1 thiol/platinum molar ratio) which was heated up at 200oC for 5 hours. The particle size of platinum nanoparticles was determined to be ~ 10 nm in diameter. The size and distribution of metal nanoparticles on carbon support, the Pt/Ru surface composition, the relative amount of Pt(0), Pt(II) and Pt(IV) and the removal of organic surfactant molecules around the metal nanoparticles were found to be important in determining the catalytic activity of electrodes towards methanol oxidation reaction. A significant decrease in catalytic activity was observed for carbon supported 1-hexanethiol stabilized Pt75Ru25 and Pt97Ru3 (with 1:1 thiol/PtRu molar ratio) with respect to carbon supported 1-hexanethiol stabilized Pt (with 1:1 thiol/platinum molar ratio). This result might be due to unremoved stabilizer shell around platinum/ruthenium nanoparticles and increase in amount of Pt(II) and Pt(IV) compared to Pt(0) where the methanol oxidation occured.