In this thesis, firstly, carbon-supported platinum nanoparticle catalysts have been prepared by using PtCl4 and H2PtCl6 as starting materials and 1-hexanethiol, and tert-octanethiol, as surfactants for the first time. Secondly, these prepared catalysts were heated to 200 &deg / C, 300 &deg / C, and 400 &deg / C for 4 h under argon gas. Lastly, PtRu/C catalysts, which have different atomic percent ratios of Pt and Ru (Pt/Ru: 0.8, 2.1 and 3.5), were prepared using PtCl4 and RuCl3 as starting materials and tert-octanethiol as a surfactant. Each was characterized by X-ray diffraction, transmission electron microscopy, energy dispersive analysis, X-ray photoelectron spectroscopy, cyclic voltammetry, and elemental analysis, and their activities were determined toward the methanol oxidation reaction. It has been found that all prepared catalysts are more active toward methanol oxidation reaction compared to the commercial catalysts. It was also found that increasing the temperature during the heat treatment process results in an enlargement of platinum particle size and a decrease in catalytic activity in the methanol oxidation reaction. Transmission electron microscopy shows that platinum nanoparticles are homogeneously dispersed on the carbon support and exhibited a narrow size distribution with an average particle size of about 2-3 nm in diameter. X-ray photoelectron spectra of all catalysts indicated that most of the platinum nanoparticles (&gt / 70 %) have an oxidation state of zero and rest (&lt / 30 %) have a +4 oxidation state with (Pt 4f7/2) binding energies of 71.2-72.2 and 74.3-75.5 eV, respectively.

Ionic transport in metal oxides is crucial for the functioning of a broad range of different components, such as heat resistant alloys designed for high temperature applications and oxide electrolytes in solid oxide fuel cells. This thesis presents results from in situ electrochemical studies of properties related to ionic transport in metal oxides that are important for their applications as protective oxides and ionic conductors. Heat resistant alloys of alumina-former type are known to form an adherent, slowly growing and protective aluminium oxide (Al2O3) scale that protects metals from chemical degradation at high temperature. In situ impedance spectroscopy was used to study highly pure and dense samples of a-alumina in the temperature range 400 – 1000 °C. It was shown that surface conduction on the sample could severely distort the measurement below 700 °C. The magnitude of the distortions appeared to be sensitive to the type of electrodes used. The use of a so-called guard electrode was shown to effectively block the surface conduction in the measurements. By varying the grain size of the sintered alpha-alumina samples, the influence of grain size on the overall conductivity of the a-alumina was studied. It was shown that the activation energy for conductivity increased as the grain size decreased. Molecular dynamics calculations were performed in order to elucidate whether Al- or O ions are dominant in the ionic conductivity of the alpha-alumina. Comparing the calculation and experimental results, the dominating charge carrier was suggested to be oxygen ions. Moreover, the ionic transport in thermally grown alumina-like oxide scales formed on a FeCrAl alloy was studied in situ by impedance spectroscopy between 600 and 1000 °C. It was shown that the properties of these scales differ largely from those of pure and dense alpha-alumina. Furthermore, the conductivity is mainly electronic, due to the multiphase/multilayer microstructure and substantial incorporation of species from the base metal. However, the diffusivity obtained from the ionic conductivity was in line with diffusion data in literature obtained by other methods such as thermogravimetry. Besides, the initial stage of oxidation of a number of Fe-, Ni- and Co-based alloys at temperatures between 500 and 800 °C was studied in situ by high temperature cyclic voltammetry, in which the oxygen activity was changed over a wide range. From the resulting voltammograms the redox reactions occurring on the alloy surface could be identified. It was concluded that the base metal oxidized readily on these alloys before a protective chromia- or alumina-like scale is formed. The base metal oxide is most likely incorporated into the more protective oxide. Further, the oxygen ionic conductivity of highly pure and fully dense yttria-stabilized zirconia produced by spark plasma sintering was studied by impedance spectroscopy. The aim was to evaluate intrinsic blocking effects on the ionic conduction associated with the space charge layer in the grain boundary region. It was observed that the ionic conductivity of the spark plasma sintered oxides is equal or slightly higher than what has been achieved by conventional sintering methods. In addition, it was shown that the specific grain boundary conductivity increases with decreasing grain size, which can be explained by a decreasing Schottky barrier height (i.e., decreasing blocking effect). The quantitative results from this work verify the space charge model describing the influence of grain size on the ionic conductivity of yttria-stabilized zirconia through dopant segregation and oxygen vacancy depletion along the grain boundaries. / QC 20100825

<p>One of the most powerful aspects of conducting polymers is their ability to be nanostructured through innovative, synthetically manipulated, transformations, such as to tailor-make the polymers for specialized applications. In the exponentially increasing wide field of nanotechnology, some special attention is being paid to innovative hybrid dendrimer-core based polymeric smart materials. Star copolymers are a class of branched macromolecules having a central core with multiple linear polymer chains extending from the core. This intrinsic structural feature yields a unique 3D structure with extended conjugated linear polymer chains, resulting in star copolymers, which have higher ionic conductivities than their corresponding non-star conducting polymer counterparts. In this study an in-depth investigation was carried out into the preparation and characterization of specialized electronic &lsquo / smart materials&rsquo / . In particular, the preparation and characterization of novel conducting dendrimeric star copolymers which have a central poly(propylene imine) (PPI) dendrimer core with conducting polypyrrole (PPy) chains extending from the core was carried out. This involved, first, the preparation of a series of dendrimeric polypyrrole poly(propylene imine) star copolymers (PPI-co-PPy), using generations 1 to 4 (G1 to G4) PPI dendrimer precursors. The experimental approach involved the use of both chemical and electrochemical synthesis methods. The basic procedure involved a condensation reaction between the primary amine of a diamino functional PPI dendrimer surface and 2-pyrrole aldehyde, to afford the pyrrole functionalized PPI dendrimer (PPI-2Py). Polymerization of the intrinsically contained monomeric Py units situated within the dendrimer backbone was achieved via two distinctly different routes: the first involved chemical polymerization and the second was based on potentiodynamic oxidative electrochemical polymerization. The star copolymers were then characterized using various sophisticated analytical techniques, in-situ and ex-situ. Proton nuclear magnetic resonance spectroscopy (1HNMR) and Fourier transform infrared spectroscopy (FTIR) were used to determine the structures. Scanning electron microscopy (SEM) was used to determine the morphology. Themogravimetric analysis (TGA) was used to study the thermal stability of the prepared materials. X-ray diffraction analysis (XRD) was used to study the structural make-up of phases, crystallinity and amorphous content. Hall effect measurements were carried out to determine the electrical conductivity of the chemically prepared star copolymers. The PPI-co-PPy exhibited improved thermal stability compared to PPI-2Py, as confirmed by TGA. SEM results showed that the surface morphology of the functionalized dendrimer and star copolymer differed. The surface morphology of the chemically prepared star copolymers resembled that of a flaky, waxy material, compared to the ordered morphology of the electrochemically grown star copolymers, which resembled that of whelk-like helixes. In the case the electrochemically grown star copolymers, SEM images recorded at higher magnifications showed that the whelk-like helixes of the star copolymers were hollow tubes with openings at their tapered ends, and had an average base diameter of 2.0 &mu / m. X-ray diffraction analysis of the first generation star copolymer G1PPI-co-PPy revealed a broadly amorphous structure associated with PPy, and crystalline peaks for PPI. Cyclic voltammetry (CV), square wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS) techniques were used to study and model the electrochemical reactivity of the star copolymer materials. Electrochemical impedance spectroscopy data showed that the G1PPI-co-PPy exhibited slightly higher ionic conductivity than pristine PPy in lithium perchlorate. The second generation star copolymer G2PPI-co-PPy electrochemically deposited on a platinum (Pt) electrode had a lower electrochemical charge transfer resistance compared to electrodeposited polypyrrole (PPy) on a Pt electrode, and bare Pt. The decrease in charge transfer resistance was attributed to an increase in the conjugation length of the polymer as a result of the linking of the highly conjugated PPy to the PPI dendrimer. Bode impedimetric analysis indicated that G2PPI-co-PPI was a semiconductor, with a maximum phase angle shift of 45.3&deg / at 100 MHz. The star copolymer exhibited a 2- electron electrochemistry and a surface coverage of 99%. Results of Hall effect measurements showed that the star copolymer is a semiconducting material, having a conductivity of 0.7 S cm-1, in comparison to the 1.5 S cm-1 of PPy. To the best of my knowledge, these new star copolymers have not been reported in the open literature. Their properties make them potentially applicable for use in biosensors.</p>

In light of its rapidly growing energy demand, human society has an urgent need to become much more strongly reliant on renewable and sustainable energy carriers. Molecular hydrogen made from water with solar energy could provide an ideal case. The development of inexpensive, robust and rare element free catalysts is crucial for this technology to succeed. Enzymes in nature can give us ideas about what such catalysts could look like, but for the directed adjustment of any natural or synthetic catalyst to the requirements of large scale catalysis, its capabilities and limitations need to be understood on the level of individual reaction steps. This thesis deals with kinetic and mechanistic investigations of photo- and electrocatalytic hydrogen production with natural and synthetic molecular catalysts. Photochemical hydrogen production can be achieved with both E. coli Hyd-2 [NiFe] hydrogenase and a synthetic dinuclear [FeFe] hydrogenase active site model by ruthenium polypyridyl photosensitization. The overall quantum yields are on the order of several percent. Transient UV-Vis absorption experiments reveal that these yields are strongly controlled by the competition of charge recombination reactions with catalysis. With the hydrogenase major electron losses occur at the stage of enzyme reduction by the reduced photosensitizer. In contrast, catalyst reduction is very efficient in case of the synthetic dinuclear active site model. Here, losses presumably occur at the stage of reduced catalyst intermediates. Moreover, the synthetic catalyst is prone to structural changes induced by competing ligands such as secondary amines or DMF, which lead to catalytically active, potentially mononuclear, species. Investigations of electrocatalytic hydrogen production with a mononuclear catalyst by cyclic voltammetry provide detailed kinetic and mechanistic information on the catalyst itself. By extension of existing theory, it is possible to distinguish between alternative catalytic pathways and to extract rate constants for individual steps of catalysis. The equilibrium constant for catalyst protonation can be determined, and limits can be set on both the protonation and deprotonation rate constant. Hydrogen bond formation likely involves two catalyst molecules, and even the second order rate constant characterizing hydrogen bond formation and/or release can be determined.

The experimental section in this thesis was based on the work of Kanan, M.W, et al reported in Science in December of 2008. A catalyst containing cobalt and phosphate was synthesized and used to decompose water into oxygen and hydrogen. This was done at nearly neutral pH. Cyclic voltammetry was performed to analyze the catalyst’s efficiency. Some surfaces were analyzed in a scanning electron microscope and the elemental composition was determined using energy-dispersive X-ray spectroscopy. A catalytic effect was observed at a potential of about 1,3 V. EDX showed Co at some of the surfaces. Quantum calculations were used to develop a model for the catalyst material. Molecular orbitals, interaction energies and vibrational frequencies were calculated for two different complexes of Co and phosphate. Patrik Larses was responsible for the electrochemical evaluation and synthesis in the experimental section of this thesis and Lina Tegesjö for the computational part.

In this thesis, carbon supported platinum nanoparticle catalysts were prepared using PtCl4 and H2PtCl6 as starting materials and 1-heptanethiol, tert-nonyl mercaptan, 1-hexadecanethiol, 1-octadecanethiol as surfactants. These new catalysts were employed for methanol oxidation reaction which are used for direct methanol fuel cells. Tert-nonyl mercaptane was used for the first time in this type of reaction and the other surfactants were used for comparison of the catalysts performance. Cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used in order to determine the nature of the catalysts. The average platinum crystallite particle sizes of all prepared catalysts were determined by both X-ray diffraction and transmission electron microscopy. It was found that platinum crystallizes in face-centered cubic structure and the surfactant play an important role on the size of platinum nanoparticles, branch surfactant, such as tert-nonyl mercaptane, causes an increase in the size of platinum nanoparticles, about 3 nm, compared to linear surfactant, such as 1-heptanethiol, about 2 nm. The oxidation states of platinum and their ratios were determined by XPS technique. These results indicated that platinum has two different oxidation states, zero and +4, and Pt(0) to Pt(IV) ratio is about 7.5 to 2.5. In addition to this, O 1s region of XPS was also examined and found that the surface of all of the catalysts covered by adsorbed hydroxide except the catalyst which was prepared by PtCl4 and tert-nonyl mercaptane (Catalyst IIa), where adsorption of water were observed and the catalyst which was prepared by H2PtCl6 and tert-nonyl mercaptane (Catalysts IIb), where adsorption of 65% of hydroxide and 35% of water were identified. Electrochemical studies indicated that Catalyst IIa has the maximum activity (&amp / #61566 / 342 A/gPt at 0.612 V) towards methanol oxidation reaction while Catalyst IIIb (H2PtCl6 and 1-hexanethiol were used to prepare this catalyst) has the minimum activity (&amp / #61566 / 91A/gPt at 0.580V). XRD, TEM and XPS results indicated that the optimum catalyst for methanol oxidation reaction contains about 3 nm of platinum nanoparticles, adsorbed hydroxide and water on the surface of catalyst, but sulphur. These results are in agreement with the proposed mechanism.

In this work, two groups of carbon supported Pt-Pd catalysts have been prepared in order to investigate the effect of Pd, as a second metal, and surfactants on the catalytic activity towards methanol and ethanol oxidation reactions used in the direct methanol and ethanol fuel cells. In the first group (group a), 1- hexanethiol was used as a stabilizing agent while in the second group (group b), 1,1 dimethyl hexanethiol was utilized. Cyclic voltammetry (CV), chronoamperometry (CA), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were used in order to determine the nature of the catalysts. The average crystalline size of the metal particles in the catalysts was explored by XRD and TEM. TEM results revealed the uniform distribution of the metal nanoparticles on carbon support with a narrow size distribution in the range of 3.0 to 3.7 nm and the average crystalline sizes of metal particles for group &ldquo / b&rdquo / catalysts were larger than that of group &ldquo / a&rdquo / catalysts which can be explained by the surfactant effect. These results were in good agreement with XRD data. The oxidation states of platinum (Pt(0) and Pt(IV)) and palladium (Pd(0) and Pd(II)) and their ratios were investigated by XPS and for the most active catalyst, catalyst Ib, these ratios were found to be as 6.94 and 13.7, respectively. Electrochemical activities of the catalysts towards methanol and ethanol oxidation reactions were recorded and compared with that of Pt/C and the commercial Pt (ETEK 20 %wt) catalysts. The results indicated that the group &lsquo / b&rsquo / catalyst has greater catalytic activities than that of group &lsquo / a&rsquo / catalysts. Catalyst Ib comes into prominence as the most active catalyst due to its superior characteristics that it possess such as highest extent of alloying with respect to the palladium amount used, active surface area, CO-tolerance, stability and Pt (0) to Pt (IV) and Pd (0) to Pd (II) ratios.

<p>This thesis deals with the synthesis of electroactiveorganic compounds. The synthesis of ethylenedioxy-benzodioxinstri-dioxin and tetra-dioxin are described. These molecules wereprepared with the aim of creating donor molecules for cationicradical salts. The symmetric analogs of tri-dioxin,methylenedioxy-derivative and ethylenedioxy-naphthalene werealso synthesized. Three different cation radical salts with 2:1stoichiometries were obtained from tri-dioxin, whiletetra-dioxin merely provided polycrystalline materials.Tri-dioxin and tetra-dioxin were also successful as operationalmatrixes in PALDI-TOF.</p><p>Tetrathiafulvalenes with the2-dialkyl-amino-1,3-dithiolium-4-thiolate mesoion asbuilding-block was also synthesized. A series of doublyalkylthiol-substituted TTFs were prepared with the aim offorming self-assembly monolayers on gold surfaces in theapplication of organic thin film field-effect transistors.Film-formation for two TTFs were studied and they providedrelatively dense packed monolayers with a discrete distance ofthe TTF moiety from the gold surface.</p><p>The mesoionic compound was also for the first time used inan<i>umpolung</i>reaction. The electrophile obtained in situ bytreatment of mesoion with sulfuryl chloride was reacted with avariety of electron-rich aromatic compounds. From the receivedproducts three new arylthio-substituted TTFs weresynthesized.</p><p><b>Keywords:</b>Synthesis, Benzodioxin, Tetrathiafulvalene,Mesoion, Organic Conductor, Cation Radical Salt, CyclicVoltammetry, Electrocrystallization, Self-Assembly Monolayer,SAM, Organic Field-Effect Transistor, OFET</p>

<p>The main hypothesis in this study is the development of a nanocomposite mediated amperometric biosensor for detection of hydrogen peroxide. The aim is to combine the electrochemical properties of both polyaniline and ferrocenium hexafluorophosphate into highly conductive nano composites capable of exhibiting electrochemistry in non acidic media / shuttling electrons between HRP and GCE for biosensor applications.</p>

<p>In this research project, nanostructured composites based on Tin dioxide (SnO2) and Titanium dioxide (TiO2) with poly-4-styrene sulfonic acid (PSSA) doped polyaniline (PANI) conducting polymer has been investigated based on their structural, electrical and electrochemical properties. The synthesis of conducting polymers and their metal oxide or composites have been carried out chemically or electrochemically according to methods modified from the literature. Layer-by-layer construction of nano-Metal Oxide/PSSA doped polyaniline composites were successfully constructed by electroanalytical methods on the surface of a glassy carbon working electrode (GCE).</p>