abstract: Photosynthesis, one of the most important processes in nature, has provided an energy basis for nearly all life on Earth, as well as the fossil fuels we use today to power modern society. This research aims to mimic the photosynthetic process of converting incident solar energy into chemical potential energy in the form of a fuel via systems capable of carrying out photo-induced electron transfer to drive the production of hydrogen from water. Herein is detailed progress in using photo-induced stepwise electron transfer to drive the oxidation of water and reduction of protons to hydrogen. In the design, use of more blue absorbing porphyrin dyes to generate high-potential intermediates for oxidizing water and more red absorbing phthalocyanine dyes for forming the low potential charge needed for the production of hydrogen have been utilized. For investigating water oxidation at the photoanode, high potential porphyrins such as, bis-pyridyl porphyrins and pentafluorophenyl porphyrins have been synthesized and experiments have aimed at the co-immobilization of this dye with an IrO2-nH2O catalyst on TiO2. To drive the cathodic reaction of the water splitting photoelectrochemical cell, utilization of silicon octabutoxy-phthalocyanines have been explored, as they offer good absorption in the red to near infrared, coupled with low potential photo-excited states. Axially and peripherally substituted phthalocyanines bearing carboxylic anchoring groups for the immobilization on semiconductors such as TiO2 has been investigated. Ultimately, this work should culminate in a photoelectrochemical cell capable of splitting water to oxygen and hydrogen with the only energy input from light. A series of perylene dyes bearing multiple semi-conducting metal oxide anchoring groups have been synthesized and studied. Results have shown interfacial electron transfer between these perylenes and TiO2 nanoparticles encapsulated within reverse micelles and naked nanoparticles. The binding process was followed by monitoring the hypsochromic shift of the dye absorption spectra over time. Photoinduced electron transfer from the singlet excited state of the perylenes to the TiO2 conduction band is indicated by emission quenching of the TiO2-bound form of the dyes and confirmed by transient absorption measurements of the radical cation of the dyes and free carriers (injected electrons) in the TiO2. / Dissertation/Thesis / Ph.D. Chemistry 2013

No description available.

No description available.

[FeFe]-Hydrogenases (H2ases) are metalloenzymes that can catalyze the reversible reduction of protons to molecular hydrogen as part of the metabolism of certain cyanobacteria and green algae. Due to the low availability of the enzyme, synthetic complexes that mimic the natural active site in structure, function and activity are highly sought after. In this thesis, a number of [FeFe]-H2ases active site model complexes were synthesized to answer open questions of the active site and to develop unprecedented bio-inspired proton reduction catalysts. The first part describes the synthesis and the protonation properties of a [Fe2(μ-adt)(CO)4(PMe3)2] (adt = azadithiolate) complex which contains two basic sites that are similar to those found in the enzyme active site. Unusual kinetic factors give rise to four discrete protonation states. The twofold protonated state is the first model complex that simultaneously carries a proton at the azadithiolate nitrogen and a bridging hydride at the Fe-Fe bond. In the second part, a model complex with an unprecedented amine ligand was synthesized and studied. In analogy to the enzyme active site, the labile amine ligand is expelled after electrochemical reduction. The third part describes a series of model complexes with electronically different aromatic dithiolate ligands. It is demonstrated in one case that the tuning of the ligand by electron-withdrawing substituents results in proton reduction catalysis at an overpotential that is lower than that required by the non-substituted parent compound. The design and the synthetic work towards a new ruthenium-diiron dyad for light-driven hydrogen production are presented in the fourth part. In the final part, differently isotope-labelled mixed valent Fe(I)-Fe(II) model complexes were synthesized, in particular the unprecedented 15N labelled analogue, with the aim to provide EPR-spectroscopic references that will allow the elucidation of the nature of the central atom in the dithiolate bridge of the [FeFe] hydrogenase active site.

Ce travail porte sur les complexes des métaux de transitions pour la catalyse de la réduction des protons en hydrogène. La nature de l’espèce catalytiquement active mise en jeu lors du processus de réduction a été étudiée par voltampérométrie cyclique afin de comprendre le rôle et le mode d’action de ces complexes. Le premier chapitre introduit le contexte et les principaux objectifs de ce travail. Le deuxième chapitre propose une étude électochimique de complexes de cobalt et de nickel à ligands bis(glyoxime) et clathrochélates en phase homogène. Leur comportement en présence d’acide et en condition réductrice est décrit et un mécanisme réactionnel associé est proposé. L’influence des ligands de la sphère de coordination sur le comportement électrochimique de ces complexes a été rationalisé par le biais de substitution des groupements présents sur les ligands bis(glyoxime) et clathrochélates. Le troisième chapitre aborde le rôle de pré-catalyseur que peuvent tenir ces complexes en condition d’électrolyse réductrice et en milieu acide. L’électrosynthèse de nanoparticules catalytiques à partir de ces complexes a mis en évidence le rôle majeur des ligands bis(glyoxime) et clathrochélates dans ce phénomène d’électrodéposition. Ces résultats montrent que ces ligands peuvent être utilisés pour contrôler la nature et l’activité de nanoparticules catalytiques pour la réduction des protons en dihydrogène. Le quatrième chapitre vise à immobiliser les complexes de cobalt à ligand clathrochélate au sein de réseaux de coordination afin d’optimiser leur activité catalytique. Malgré la faible solubilité et l’encombrement stérique de ces complexes, des synthèses en conditions très douces ont abouti à la formation de réseaux mono et bi-dimensionels à base d’ions cadmium(II). / My PhD thesis goal was to investigate on the catalytic properties of first row transition metal complexes for the hydrogen evolving reaction (HER). The underlying question in the field concerning the catalytic species of metal complexes for the HER was then, whether it is homogeneous or heterogeneous catalysis. My work concerns the synthesis and characterization of oximato based cobalt and nickel complexes and their electrochemical behavior in presence of acids.In the first chapter, I give a general introduction on the search for catalytic molecular systems for the production of hydrogen. I also give an overview of my approach tackling the problem of homogeneous and heterogeneous catalysis. In the second chapter I discuss on the electrochemical study of cobalt and nickel complexes containing bis(glyoxime) ligands and clathrochelates complexes in homogeneous phase. Their electrochemical behavior under reductive conditions in presence of acids is described. The absence of molecular based catalysis is discussed and a mechanistic pathway for the consumption of protons and electrons is proposed. The influence of the ligands in the coordination sphere has been rationalized through substitutions of the chemical groups on the bis(glyoxime) and clathrochelates ligands. The third chapter concerns the generation of catalytic material from the molecular precursors in acidic reductive conditions. Electrochemically modified glassy carbon electrodes were characterized by TEM and evidenced the formation nanoparticles containing the initial metal ions (either cobalt of nickel). Our results show that the chemical nature of the ligands can be used in order to control the nature and reactivity patterns of these catalytically active nanoparticles for proton reduction into hydrogen.In the forth chapter, I give the preliminary results on the immobilization the cobalt clathrochelates complexes inside coordination networks in order to improve their catalytic activity. Despite the weak solubility and the bulk of these complexes, mild conditions synthesis have led to mono and bi-dimensional networks based on cadmium (II) ions.To conclude I emphasize on the different ways that can be followed to further pursue this quest for catalytic materials for the HER starting with molecular based complexes as precursors.

Ce travail porte sur la synthèse, la caractérisation et l’évaluation en catalyse de réduction des protons en dihydrogène, de nouveaux complexes de Ni(II), Co(III), Cu(II) et Pd(II) basés sur des ligands de type thiosemicarbazone. La nature de l’espèce catalytique active a été étudiée par voltampérométrie cyclique et des propositions de mécanisme ont été formulés sur la base de calcul quantique de type DFT.Le premier chapitre introduit le contexte scientifique. Le second chapitre concerne la synthèse et la caractérisation des ligands de type N2S2 et des complexes mononucléaires associés de Ni, Cu et Pd. Le troisième chapitre présente la synthèse et la caractérisation de complexes binucléaires de Co et trinucléaire de Ni.Les études électrochimiques de ces complexes dans le DMF en présence d’une source de protons, nous a permis d’évaluer leur efficacité catalytique. Nos résultats montrent que les complexes du Cu et du Pd présentent une vague irréversible spécifique pour la réduction des protons, mais une décomposition est observée durant l’électrolyse. Par contre, les complexes de Ni et de Co ont montré une stabilité électrochimique ainsi que de bonnes performances catalytiques. En particulier, le nouveau complexe mononucléaire de Ni présente des propriétés catalytiques remarquables qui le classent parmi les meilleurs catalyseurs de la réduction des protons décrits dans la littérature. L’ensemble de ce travail fourni une description complète du comportement électrochimique des ligands de type N2S2 complexés à des métaux de transition. Il permet d’envisager des développements futurs dans l’amélioration des propriétés catalytiques de ces complexes. / This work focuses on the synthesis, the characterization and the catalytic evaluation in the reduction of protons into dihydrogen, of new complexes of Ni(II), Co(III), Cu(II) and Pd(II) based ligands Type thiosemicarbazone. The catalytically active species during the process of the proton reduction was studied by cyclic voltammetry and mechanisms were formulated on the basis quantum chemical calculation.The first chapter introduces the scientific context, the goals and the main objectives of this work. The second chapter concerns the synthesis and the characterization of the N2S2 ligands and their associated mononuclear complexes, Ni, Cu and Pd. The third chapter presents the synthesis and the characterization of binuclear Co and trinuclear Ni based on N2S2 ligand.Electrochemical studies of these complexes in DMF in the presence of a proton source (trifluoroacetic acid), allowed us to evaluate their catalytic efficiency. Our results show that Cu and Pd complexes have a specific irreversible wave for the reduction of protons, but decomposition is observed during electrolysis, which makes these uninteresting complexes for the reduction of protons.On the contrary, Ni and Co complexes showed an electrochemical stability and good catalytic performances. In particular, the new mononuclear Ni complex exhibits remarkable catalytic properties that rank it among the best catalysts for the reduction of protons reported in the literature. All this work provided a complete description of the electrochemical behavior of N2S2 thiosemicarbazone ligands complexed to transition metals. It allows considering future developments in improving the catalytic properties of these complexes.

De nos jours, la capacité à synthétiser de nouveaux catalyseurs métallique bioinspirés pour améliorer et élargir le spectre d'activité catalytique est d’une importance capitale pour une chimie respectueuse de notre environnement.Cette thèse se concentre sur la conception de nouveaux complexes de métaux de transition (cuivre et palladium) basés sur deux classes différentes de ligands organiques : les benzotriazolyle-phénolates et les phosphonates. La synthèse et la caractérisation de nouveaux composés a été réalisée par différentes méthodes physico-chimiques (électrochimie, EPR, UV-vis, IR, cristallographie aux rayons X) et la chimie théorique. La génération et la caractérisation des différentes espèces réduites et oxydées nous ont aidés dans la détermination des mécanismes possible. Les composés obtenus ont été utilisés avec succès comme catalyseurs dans divers procédés tels que: la production d'hydrogène, l'oxydation d'alcool et le clivage d'ADN. / Nowadays, the ability to synthesize new bioinspired metal catalysts to improve and broaden the spectrum of catalytic activity is of paramount importance for sustainable chemistry respectful for our environment. This thesis is focused on the design of transition metal complexes (copper and palladium) based on two different classes of organic ligands: benzotriazolyl-phenolates and phosphonates.Different original complexes based on palladium and copper were synthetized from benzotriazolyl-phenolate and phosphonates ligands. The characterization of the new compounds was performed by different physical and physico-chemical methods (electrochemistry, EPR, UV-vis, IR, X-ray crystallography) and quantum chemistry. The generation and characterization of different reduced and oxidized species helped us in the possible mechanisms determination. The obtained compounds were successfully employed as catalysts in different processes as: hydrogen production, alcohol oxidation and DNA cleavage.

<p>A molecular system capable of photoinduced water splitting is an attractive approach to solar energy conversion. This thesis deals with the functional characterization of molecular building blocks for the three principal functions of such a molecular system: Photoinduced accumulative charge separation, catalytic water oxidation, and catalytic proton reduction. </p><p>Systems combining a ruthenium-trisbipyridine photosensitizer with multi-electron donors in form of dinuclear ruthenium or manganese complexes were investigated in view of the rate constants of electron transfer and excited state quenching. The kinetics were studied in the different oxidation states of the donor unit by combination of electrochemistry and time resolved spectroscopy. The rapid excited state quenching by the multi-electron donors points to the importance of redox intermediates for efficient accumulative photooxidation of the terminal donor.</p><p>The redox behavior of manganese complexes as mimics of the water oxidizing catalyst in the natural photosynthetic reaction center was studied by electrochemical and spectroscopic methods. For a dinuclear manganese complex ligand exchange reactions were studied in view of their importance for the accumulative oxidation of the complex and its reactivity towards water. With the binding of substrate water, multiple oxidation in a narrow potential range and concomitant deprotonation of the bound water it was demonstrated that the manganese complex is capable of mimicking multiple aspects of photosynthetic water oxidation.</p><p>A dinuclear iron complex was investigated as biomimetic proton reduction catalyst. The complex structurally mimics the active site of the iron-only hydrogenase enzyme and was designed to hold a proton on the bridging ligand and a hydride on the iron centers. Thermodynamics and kinetics of the protonation reactions and the electrochemical behavior of the different protonation states were studied in view of their potential catalytic performance.</p>

A molecular system capable of photoinduced water splitting is an attractive approach to solar energy conversion. This thesis deals with the functional characterization of molecular building blocks for the three principal functions of such a molecular system: Photoinduced accumulative charge separation, catalytic water oxidation, and catalytic proton reduction. Systems combining a ruthenium-trisbipyridine photosensitizer with multi-electron donors in form of dinuclear ruthenium or manganese complexes were investigated in view of the rate constants of electron transfer and excited state quenching. The kinetics were studied in the different oxidation states of the donor unit by combination of electrochemistry and time resolved spectroscopy. The rapid excited state quenching by the multi-electron donors points to the importance of redox intermediates for efficient accumulative photooxidation of the terminal donor. The redox behavior of manganese complexes as mimics of the water oxidizing catalyst in the natural photosynthetic reaction center was studied by electrochemical and spectroscopic methods. For a dinuclear manganese complex ligand exchange reactions were studied in view of their importance for the accumulative oxidation of the complex and its reactivity towards water. With the binding of substrate water, multiple oxidation in a narrow potential range and concomitant deprotonation of the bound water it was demonstrated that the manganese complex is capable of mimicking multiple aspects of photosynthetic water oxidation. A dinuclear iron complex was investigated as biomimetic proton reduction catalyst. The complex structurally mimics the active site of the iron-only hydrogenase enzyme and was designed to hold a proton on the bridging ligand and a hydride on the iron centers. Thermodynamics and kinetics of the protonation reactions and the electrochemical behavior of the different protonation states were studied in view of their potential catalytic performance.

In light of its rapidly growing energy demand, human society has an urgent need to become much more strongly reliant on renewable and sustainable energy carriers. Molecular hydrogen made from water with solar energy could provide an ideal case. The development of inexpensive, robust and rare element free catalysts is crucial for this technology to succeed. Enzymes in nature can give us ideas about what such catalysts could look like, but for the directed adjustment of any natural or synthetic catalyst to the requirements of large scale catalysis, its capabilities and limitations need to be understood on the level of individual reaction steps. This thesis deals with kinetic and mechanistic investigations of photo- and electrocatalytic hydrogen production with natural and synthetic molecular catalysts. Photochemical hydrogen production can be achieved with both E. coli Hyd-2 [NiFe] hydrogenase and a synthetic dinuclear [FeFe] hydrogenase active site model by ruthenium polypyridyl photosensitization. The overall quantum yields are on the order of several percent. Transient UV-Vis absorption experiments reveal that these yields are strongly controlled by the competition of charge recombination reactions with catalysis. With the hydrogenase major electron losses occur at the stage of enzyme reduction by the reduced photosensitizer. In contrast, catalyst reduction is very efficient in case of the synthetic dinuclear active site model. Here, losses presumably occur at the stage of reduced catalyst intermediates. Moreover, the synthetic catalyst is prone to structural changes induced by competing ligands such as secondary amines or DMF, which lead to catalytically active, potentially mononuclear, species. Investigations of electrocatalytic hydrogen production with a mononuclear catalyst by cyclic voltammetry provide detailed kinetic and mechanistic information on the catalyst itself. By extension of existing theory, it is possible to distinguish between alternative catalytic pathways and to extract rate constants for individual steps of catalysis. The equilibrium constant for catalyst protonation can be determined, and limits can be set on both the protonation and deprotonation rate constant. Hydrogen bond formation likely involves two catalyst molecules, and even the second order rate constant characterizing hydrogen bond formation and/or release can be determined.