Part 1: Transition-metal-catalyzed direct transformations of aromatic C-H bonds are emerging as valuable tools in organic synthesis. These reactions are attractive because of they allow for inherently efficient construction of organic building blocks by minimizing the pre-activation of substrates. Of these processes, direct arylation has recently received much attention due to the importance of the biaryl core in medicinal and materials chemistry. Also, alkyne hydroarylation has garnered interest because it allows for the atom-economical synthesis of functionalized alkenes directly from simple arenes and alkynes. Described in this thesis are number of advancements in these areas. First, palladium catalyzed direct arylation of azine N-oxides using synthetically important aryl triflates is described. Interesting reactivity of aryl triflates compared to aryl bromides was uncovered and exploited in the synthesis of a compound that exhibits antimalarial and antimicrobial activity. Also reported is the efficient, direct arylation enabled (formal) synthesis of six thiophene based organic electronic materials in high yields using simple starting materials. Additionally, the site-selective direct arylation of both sp2 and sp3 sites on azine N-oxide substrates is described. The arylation reactions are carried out in either a divergent manner or a sequential manner and is applied to the synthesis of the natural products, Papaverine and Crykonisine. Mechanistic investigations point towards the intimate involvement of the base in the mechanism of these reactions. Next, the rhodium(III)-catalyzed hydroarylation of internal alkynes is described. Good yields are obtained for a variety of alkynes and arenes with excellent regioselectivity for unsymmetrically substituted alkynes. Mechanistic investigations suggest that this reaction proceeds through arene metalation with the cationic rhodium catalyst, which enables challenging intermolecular reactivity. Part 2: Access to single enantiomer compounds is a fundamental goal in organic chemistry and despite remarkable advances in enantioselective synthesis, their preparation remains a challenge. Kinetic resolution of racemic products is an important method to access enantioenriched compounds, especially when alternative methods are scarce. Described in this thesis is the resolution of tertiary and secondary alcohols, which arise from ketone and aldehyde aldol additions. The method is technically simple, easily scalable, and provides tertiary and secondary alcohols in high enantiomeric ratios. A rationale for the unique reactivity/selectivity associated with (1S,2R)-N-methylephedrine in the resolution is proposed. Organocatalysis is a rapidly developing, powerful field for the construction of enantioenriched organic molecules. Described here is a complimentary class of organocatalysis using simple aldehydes as temporary tethers to perform challenging formally intermolecular reactions at room temperature. This strategy allows for the enantioselective, intermolecular cope-type hydroamination of allylic amines with hydroxyl amines. Also, interesting catalytic reactivity for dichloromethane is revealed.

Diamond is a promising material with unique chemical properties. In this thesis, nano-scale diamond quantum size effects were investigated using several chemical property indicators. The results show that the chemical properties are strongly dependent on size for film thicknesses smaller than 1 nm (1D), and for nanodiamond particle diameters less than 2 nm (3D). When the sizes exceed these ranges there are no longer any quantum effects. The influence of surface termination coverage on the surface chemical properties has been calculated for the 2×1 reconstructed diamond (100) surface and for the diamond (111) surface. The terminating species included COOH and NH2 groups, which both are beneficial for the immobilization of biomolecules. The results of the calculations show that it is energetically possible to terminate the diamond surfaces up to 100% with NH2, while it is only possible to cover the surfaces up to 50% with COOH species. The reason for the latter result is most probably the larger sterical hindrance amongst the adsorbates. Both types of termination species were shown to influence the diamond surface electronic properties (e.g., HOMO/LUMO levels). In order to extend the diamond utility for biomedical applications, especially implant design, interactions of various growth factors with the diamond surfaces were also simulated. For non-solvent diamond-biomolecule systems, the results show that adhesion affinities are strongly dependent on biomolecule molecular weights. When including a water based solvent in the systems, the results show good physisorption affinities between proteins and diamond. Proteins structures, before and after physisorption, were visualized, and further investigated with respect to electrostatic properties and functional groups. By comparing the biomolecular structural changes during the adhesion processes, it can be concluded that both the general structures, as well as the binding pocket structures, were kept intact after the adhesion to the diamond surfaces (regardless of the adhesion affinities). In addition, the surface electronic potential distributions were maintained, which indicate preserved biomolecule functionalities. / Vascubone

Urine culture, the current gold standard for urinary tract infection (UTI) diagnosis, does not produce results in an acceptable length of time. An ultra-sensitive, cost-effective electrochemical biosensing platform with nanostructured microelectrodes was designed to address the need for a rapid, point-of-care (PoC) test that could achieve a sample-to-answer time in less than an hour. Printed circuit boards and metallized glass slides were processed using various techniques and then tested for their ability to form nanostructured microelectrodes. Peptide nucleic acid probes for the bacteria and yeast as well as ten probes for antibiotic resistance genes were designed and synthesized for use with the new platform. Validation of the sensor's specificity was performed using high concentrations (100nM) of synthetic DNA oligomers. Furthermore, a clinically relevant sensitivity of 103 cfu/mL was demonstrated by detecting 4 pathogen lysates (Staphylococcus saprophyticus, Pseudomonas aeruginosa, Enterococcus faecalis and Klebsiella pneumoniae) in a buffered solution.

Urine culture, the current gold standard for urinary tract infection (UTI) diagnosis, does not produce results in an acceptable length of time. An ultra-sensitive, cost-effective electrochemical biosensing platform with nanostructured microelectrodes was designed to address the need for a rapid, point-of-care (PoC) test that could achieve a sample-to-answer time in less than an hour. Printed circuit boards and metallized glass slides were processed using various techniques and then tested for their ability to form nanostructured microelectrodes. Peptide nucleic acid probes for the bacteria and yeast as well as ten probes for antibiotic resistance genes were designed and synthesized for use with the new platform. Validation of the sensor's specificity was performed using high concentrations (100nM) of synthetic DNA oligomers. Furthermore, a clinically relevant sensitivity of 103 cfu/mL was demonstrated by detecting 4 pathogen lysates (Staphylococcus saprophyticus, Pseudomonas aeruginosa, Enterococcus faecalis and Klebsiella pneumoniae) in a buffered solution.

Orientador: Devaney Ribeiro do Carmo / Banca: Newton Luiz Dias Filho / Banca: Regina Massako Takeuchi / Resumo: O presente trabalho apresenta a preparação de um silsesquioxano nanoestruturado, o cloropropilsilsesquioxano (S) que foi organofuncionalizado com os seguintes agentes modificadores: 4-amino-3-hidrazinico-5-mercapto-1,2,4-triazol (Purpald®) e o 4-amino-5-4(piridil)-4H-1,2,4-triazol-3-tiol (APTT), os materiais obtidos dessa funcionalização foram descritos como SP e SA, respectivamente. Os materiais SP e SA foram caracterizados por diversas técnicas espectroscópicas: Espectroscopia na região do infravermelho (FT-IR), Ressonância magnética nuclear 29Si e 13C no estado sólido (RMN), Difração de Raios- X (DRX), Espectroscopia de Energia Dispersiva de Raios X (EDX), Termogravimetria e Análise Térmica Diferencial (TG - DTA). Após a devida caracterização, realizaram-se estudos de adsorção de íons metálicos (Cu2+, Cd2+ e Ni2+) nos sítios ativos do SA, porém, curiosamente não se observou a mesma capacidade de sorção pelo SP. Diferentes meios foram estudados no processo de adsorção dos íons metálicos supracitados: aquoso, etanólico 99% e etanólico 42%, determinando-se o tempo de equilíbrio de adsorção, que para ambos os meios e metais esse tempo máximo foi em média 35 min. Determinado o tempo de equilíbrio de adsorção dos íons metálicos em cada sistema, determinou-se a capacidade específica de sorção (Nfmax) através de isotermas de adsorção. Para o Cu2+, os valores de Nf foram: meio aquoso (3,09 × 10-4 mol g-1), etanólico 42% (1,03 × 10-4 mol g-1) e etanólico 99% (1,86 × 10-4 mol g-1), com concentrações de íons Cu2+ variando de 1,74 a 29,64 mol L-1. Os valores encontrados para o Ni2+ foram: em meio aquoso (2,11 × 10-4 mol g-1), etanólico 42% (0,97 × 10-4 mol g-1) e etanólico 99% (1,05 × 10-4 mol g-1), com concentrações de íons Ni2+ variando de 2,25 a 33,18 mol L-1. Para os íons cádmio não foram... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: This work presents the preparation of a nanostructured silsesquioxane, the cloropropilsilsesquioxano (S) that was organofunctionalised with the following modifying agents: 4-amino-3-hydrazino 5 - mercapto 1,2,4 triazole (Purpald ®) and 4- amino-5-4 (pyridyl)-4H-1,2,4-triazole-3-thiol (APTT), the materials obtained of the functionalization were described as SP and SA, respectively. The materials SA and SP were characterized by various spectroscopic techniques such as spectroscopy in the region of infrared (FTIR), nuclear magnetic resonance 29Si and 13C solid-state (NMR), X-ray diffraction (XRD), Energy Dispersive Spectroscopy Rays (EDS), Thermogravimetry and Differential Thermal Analysis (TG - DTA). After proper characterization, were carried studies on adsorption of metallic ions such as Cu2+, Ni2+ and Cd2+ in the active sites of SA, but curiously did not observe the same sorption capacity of the SP. Different methods were studied in the adsorption of metal ions above: aqueous, 99% ethanolic and 42% ethanolic, determining the adsorption equilibrium time, which for both means and metals the maximum time averaged 35 min. After determining the adsorption equilibrium time of metal ions in each system, we determined the specific sorption capacity (Nfmax) through adsorption isotherms. For Cu2+, the values of Nf were: aqueous solution (3.09 × 10-4 mol g-1), 42% ethanolic (1.03 × 10-4 mol g-1) and 99% ethanolic (1.86 × 10-4 mol g-1), with Cu2 + ion concentrations ranging from 1.74 to 29.64 mol L-1. The values obtained for the Ni2+ were: aqueous solution (2.11 × 10-4 mol g-1), 42% ethanolic (0.97 × 10-4 mol g-1) and 99% ethanolic (1.05 × 10-4 mol g-1), with Ni2 + ion concentrations ranging from 2.25 to 33.18 mol L-1. For the cadmium ions were not observed saturation of adsorption sites in the concentration range studied, not getting the maximum... (Summary complete electronic access click below) / Mestre

Submitted by Maria Medeiros (maria.dilva1@ufcg.edu.br) on 2018-09-25T15:07:35Z No. of bitstreams: 1 PATRÍCIA TATIANA ARAÚJO DOS SANTOS - TESE (PPGEP) 2011.pdf: 1900230 bytes, checksum: 89561c399b083520a1b499f7b2a0e152 (MD5) / Made available in DSpace on 2018-09-25T15:07:35Z (GMT). No. of bitstreams: 1 PATRÍCIA TATIANA ARAÚJO DOS SANTOS - TESE (PPGEP) 2011.pdf: 1900230 bytes, checksum: 89561c399b083520a1b499f7b2a0e152 (MD5) Previous issue date: 2011 / Capes / Nanopartículas de ZnAl1,9Eu0,1O4 foram modificadas a superfície usando agentes amino-silanos, e funcionalizadas a partir de monômeros do tipo metilmetacrilato, etilenodiamina e quitosana como moléculas biocompatíveis. As nanopartículas do ZnAl1,9Eu0,1O4 foram obtidas por reação de combustão, e silanizadas com os agentes silanos 3 – aminopropiltrimetoxisilano e 3 – aminopropiltrietoxisilano, com o intuito de tornar o caráter do espinélio hidrofóbico e em seguida funcionalizadas. As amostras resultantes foram caracterizadas por Difração de raios X, Espectroscopia de Infra Vermelho com Transformada de Fourrier, Microscopia Eletrônica de Transmissão, Espectroscopia de Excitação e Emissão e Rendimento quântico. Os resultados revelaram a formação da fase cúbica ZnAl1,9Eu0,1O4 e traços de EuAlO3. Para as amostras funcionalizadas com quitosana observa-se a formação da fase espinélio e da fase quitosana. Mediante os espectros de FTIR observou-se bandas abaixo de 1000 cm-1 atribuídas às vibrações dos sítios tetraédricos e octaédricos. As amostras funcionalizadas com quitosana apresentaram melhor complexação (interação óxido /polímero) e presença de estiramento NH atribuído ao grupo NH2 da quitosana. A banda de C=O observada para o espinélio ZnAl1,9Eu0,1O4 com quitosana evidenciou a funcionalização das nanopartículas. As nanopartículas ZnAl1,9Eu0,1O4 apresentaram morfologia constituída de aglomerados com formato de agulhas, constituídos de partículas com formato aproximadamente hexagonal, e tamanho menores que 100 nm. Após funcionalização as nanopartículas ZnAl1,9Eu0,1O4 apresentaram morfologia não homogênea, composta por um filme e partículas impregnadas de formato aproximadamente esférica, contendo fases amorfas e cristalinas, com partículas menores que 100 nm. As amostras silanizadas, funcionalizadas com os monômeros e a amostra funcionalizada com quitosana na proporção 5:1, apresentaram as linhas espectrais do íon Eu3+ correspondentes as transições 5D0 → 7F0, 5D0 → 7F1, 5D0 → 7F2, 5D0 → 7F3 e 5D0 → 7F4. O maior rendimento quântico foi observado para a amostra funcionalizada com a mistura dos monômeros utilizando o 3- aminopropiltrimetoxisilano. / Nanoparticles ZnAl1,9Eu0,1O4 were surface modified using amino-silane agents, and from functionalized monomers like methylmethacrylate, ethylenediamine and chitosan as biocompatible molecules. Nanoparticles of ZnAl1,9Eu0,1O4 were obtained by combustion reaction, and silanized with silane agents and 3- aminopropyltrimethoxysilane and 3 -aminopropyltriethoxysilane, in order to make the hydrophobic character of the spinel and then functionalized. The resulting samples were characterized by X-ray Diffraction, Infrared Spectroscopy Fourier Transform, Transmission Electron Microscopy, Excitation and Emission Spectroscopy and quantum yield. The results revealed the formation of cubic phase ZnAl1,9Eu0,1O4 and traces of EuAlO3. For samples functionalized with chitosan, we observed the formation of spinel phase and phase chitosan. Through the FTIR spectra observed bands below 1000 cm-1 assigned to the vibrations of tetrahedral and octahedral sites. The samples functionalized with chitosan showed better complexation (interaction oxide / polymer) and the presence of NH stretch assigned to NH2 group of chitosan. C = O band observed for the spinel ZnAl1,9Eu0,1O4 with chitosan showed the functionalization of nanoparticles. Nanoparticles ZnAl1,9Eu0,1O4 showed morphology composed of needle-shaped clusters consisting of particles with roughly hexagonal shape, and size smaller than 100 nm. Nanoparticles ZnAl1,9Eu0,1O4 after functionalization showed inhomogeneous morphology, consisting of a film and impregnated particles of roughly spherical shape containing amorphous and crystalline phases, with particles smaller than 100 nm. The silanized samples, functionalized with monomers functionalized with chitosan and the sample in 5:1 ratio showed the spectral lines corresponding Eu3+ ion transitions 5D0 → 7F0, 7F1 → 5D0, 5D0 → 7F2, 5D0 → 7F3 and 5D0 → 7F4. The higher quantum yield observed for the sample was functionalized with a mixture of monomers using the 3-aminopropyltrimethoxysilane.

Actuellement, les recherches sur la fonctionnalisation des surfaces sont en pleine effervescence. Dans ce manuscrit, nous proposons une approche innovante pour mesurer l’efficacité de cette fonctionnalisation. Cette approche est basée sur l’utilisation d’un microscope à force atomique, opérant dans un mode dit de « modulation de fréquence ». Cet outil couplé aux pointes greffées d’un nanotube de carbone, que nous appellerons « sonde », permet d’obtenir des mesures qu’il serait impossible d’effectuer avec des pointes standards. En métrologie, afin d’assurer une bonne reproductibilité des mesures, nous avons besoin d’avoir des sondes ayant des caractéristiques les plus similaires possibles. Ceci a nécessité la mise en oeuvre d’une méthode pour optimiser la fabrication des sondes, ainsi qu’une définition de critères pour les classer dans différents grades de qualités. L’incertitude de répétabilité et de reproductibilité des mesures effectuées avec des sondes de grade « A » a été quantifiée. Ces mesures ont démontré que ces sondes sont compatibles en termes de robustesse et de sensibilité pour la caractérisation de surfaces fonctionnalisées, dont l’épaisseur est supérieure à la monocouche. Des mesures de cartographie effectuées sur de deux types de surfaces fonctionnalisées ont permis de dissocier la mesure de topographie de la réponse mécanique du nanotube en interaction avec la surface. / At present, the researches on the surface functionalization are in full effervescence. In this manuscript, we propose an innovative approach to measure the efficiency of this functionalization. This approach is based on the use of an atomic force microscope, operating in a mode called "frequency modulation". This tool coupled with the grafted tips with a carbon nanotube, which we will call "probe", allows to obtain measurements which would be impossible to make with standard tips. However, in metrology, in order to ensure good reproducibility of the measurements, we need to have probes with characteristics that are as similar as possible. This required the implementation of a method to optimize the manufacture of the probes, as well as a definition of criteria to classify them in different grades of qualities. The uncertainty of repeatability and reproducibility of the measures made with probes of rank "A" were quantified. These measurements have demonstrated that these probes are compatible in terms of robustness and sensitivity for the characterization of functionalized surfaces, whose thickness is superior to the monolayer. Mapping measurements carried out on two types of functionalized surfaces enable to dissociate the topography measurement from the mechanical response of the nanotube in interaction with the surface.

Submitted by Luciana Daniele Trino (lucianadtrino@gmail.com) on 2018-06-08T15:40:25Z No. of bitstreams: 1 Tese_Luciana_Daniele_Trino_POSMAT.pdf: 6699069 bytes, checksum: be06e9652268b5025a7ed7d568576862 (MD5) / Approved for entry into archive by Lucilene Cordeiro da Silva Messias null (lubiblio@bauru.unesp.br) on 2018-06-08T17:37:31Z (GMT) No. of bitstreams: 1 trino_ld_dr_bauru.pdf: 6603946 bytes, checksum: dacabdf3e79f4b7c7de3dc9da7bdaa1f (MD5) / Made available in DSpace on 2018-06-08T17:37:31Z (GMT). No. of bitstreams: 1 trino_ld_dr_bauru.pdf: 6603946 bytes, checksum: dacabdf3e79f4b7c7de3dc9da7bdaa1f (MD5) Previous issue date: 2018-04-19 / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / O titânio e suas ligas são utilizados em diversas aplicações, dentre elas em implantes ortopédicos e dentários devido à sua reconhecida biocompatibilidade. No entanto, falhas e subsequentes efeitos colaterais clínicos ainda são recorrentes em implantes. Neste contexto, melhorias podem ser alcançadas projetando biomateriais nos quais o bulk e a superfície do titânio são independentemente modificadas. Deste modo, filmes finos nanoestruturados de óxidos metálicos, tais como TiO2 e ZnO, podem melhorar as propriedades físico-químicas, a biocompatibilidade e a resistência à corrosão dos implantes de titânio. Além disso, a conjugação de biomoléculas, como peptídeos derivados da proteína da matriz dentinária 1 (DMP1), na superfície dos óxidos metálicos pode melhorar sua bioatividade, acelerando o processo de osteointegração. Dessa forma, o objetivo deste trabalho foi funcionalizar óxidos metálicos com diferentes moléculas bifuncionais e investigar as propriedades físico-químicas de grupos silano, amino, ácido carboxílico, tiol e hidroxila que atuaram como espaçadores entre os óxidos metálicos e os peptídeos da DMP1. Além disso foram realizadas análises de biocompatibilidade, mineralização, resistência à corrosão e à tribocorrosão das superfícies bio-funcionalizadas com os peptídeos da DMP1. Neste trabalho, filmes de TiO2 e ZnO nanométricos foram sintetizados pelo método sol-gel e depositados pela técnica spin coating em substratos de titânio. Posteriormente, os filmes finos de óxidos metálicos foram funcionalizados com (3-aminopropil) trimetoxissilano (APTMS), ácido 3- (4-aminofenil) propiônico (APPA), ácido 3-mercaptopropiônico (MPA) ou polietilenoglicol (PEG), que atuam como espaçadores entre os óxidos metálicos e os peptídeos da DMP1. As análises físico-químicas por XPS, microscopia confocal, AFM, ângulo de contato e energia de superfície revelaram a efetiva modificação das superfícies dos óxidos metálicos com APTMS, APPA, MPA e PEG. Após a bio-funcionalização as análises físico-químicas confirmaram a presença dos peptídeos da DMP1 na superfície dos óxidos metálicos. Além disso, testes biológicos indicaram que os peptídeos puderam modular a afinidade, proliferação e diferenciação de células mesenquimais humanas. Para a amostra contendo o dióxido de titânio, foram observados melhores resultados para o TiO2 funcionalizado com MPA e os peptídeos da DMP1. Já para o óxido de zinco, melhores resultados de biocompatibilidade foram observados para ZnO funcionalizado com APPA e os peptídeos. Além disso, a imobilização dos peptídeos da DMP1 através dos espaçadores APPA e MPA, para ambos os óxidos, levou à formação de biominerais de apatita. Os resultados eletroquímicos indicaram um aumento da resistência à corrosão nos materiais bio-funcionalizados, sendo que melhores resultados foram observados para o TiO2 quando comparado ao ZnO. Além disso a análise de tribocorrosão apresentou menor perda de massa para as amostras de TiO2 bio-funcionalizadas. Considerando os aspectos de biocompatibilidade, diferenciação osteogênica, mineralização, resistência à corrosão e à tribocorrosão a amostra de TiO2 funcionalizada com MPA e os peptídeos da DMP1 foi a que apresentou melhores resultados. Portanto, os resultados obtidos sugerem que a bio-funcionalização de óxidos metálicos é capaz de projetar implantes de melhor qualidade aplicados à medicina regenerativa. / Titanium and its alloys are used in a variety of applications, including orthopedic and dental implants because of their recognized biocompatibility. However, failures and subsequent clinical side effects are still recurrent in implants. In this context, improvements can be achieved by designing biom aterials in which the bulk and surface of the titanium are independently tailored . Thus, nanostructured metal oxides thin films , such as TiO 2 and ZnO, can improve the physicochemical properties, biocompatibility and corrosion resistance of titanium implant s. In addition, the conjugation of biomolecules, such as peptides derived from the dentin matrix 1 protein (DMP1), on the surface of the metal oxides can improve their bioactivity, accelerating the os t eointegration process. Therefore, the objective of thi s work was to functionalize metal oxides with different bifunctional molecules and to investigate the physicochemical properties of silane, amino, carboxylic acid, thiol and hydroxyl groups that act as spacers between metal oxides and DMP1 peptides. In add ition, biocompatibility, mineralization, corrosion and tribocorrosion resistance of the bio - functionalized surfaces were performed. In this work, nanosized TiO 2 and ZnO thin films were synthesized by sol - gel method and deposited by spin coating technique o n titanium substrates. Subsequently, the thin films of metal oxides were functionalized with (3 - aminopropyl) trimethoxysilane (APTMS), 3 - (4 - aminophenyl) propionic acid (APPA), 3 - mercaptopropionic acid (MPA) or polyethylene glycol (PEG), which acted as spac ers between the metal oxides and the DMP1 peptides. The physicochemical analyzes by XPS, confocal microscopy, AFM, contact angle and surface energy revealed the effective modification of the metal oxides surfaces with APTMS, APPA, MPA and PEG. After the bi o - functionalization the physicochemical analyzes confirmed the presence of the DMP1 peptides on the surface of the metal oxides. In addition, biological tests indicated that the peptides could modulate the affinity, proliferation and differentiation of hum an mesenchymal stem cells. For the sample containing the titanium dioxide, better results were observed for the TiO 2 functionalized with MPA and the DMP1 peptides. On the other hand, better biocompatibility results were observed for ZnO functionalized with APPA and peptides. In addition, the immobilization of the DMP1 peptides through the APPA and MPA spacers for both oxides led to the formation of apatite biominerals. The electrochemical results indicated an increase in corrosion resistance in the bio - func tionalized materials, and better results were observed for TiO 2 when compared to ZnO. In addition, the tribocorrosion analysis presented lower mass loss for the bio - functionalized TiO 2 samples. Considering the aspects of biocompatibility, osteogenic differ entiation, mineralization, resistance to corrosion and tribocorrosion, the TiO 2 functionalized with MPA and DMP1 peptides presented the best results. Therefore, the results suggest that the bio - functionalization of metal oxides can design better quality im plants applied to regenerative medicine / 2014/01713-3

Ce manuscrit de thèse traite de la modification de fibres de cellulose, en solutions purement aqueuses, par les organosilanes. Les réactions en phase aqueuse de silanes portants différents groupements chimiques réactifs ont été évaluées in-situ par spectrométrie par résonance magnétique nucléaire et l'influence de divers paramètres (pH, concentration, température) a été étudiée. Les aminosilanes se sont montrés particulièrement adaptés à l'utilisation en conditions correspondant à celles couramment utilisées dans le procédé papetier. En outre, l'adsorption des agents chimiques les plus prometteurs sur des surfaces modèles de cellulose a été testée par la technique microbalance à quartz, en fonction des mêmes paramètres. Cette étude a montré qu'une bonne couverture de la surface est atteinte avec des cinétiques de quelques minutes, et a été suivie d'une légère adsorption continue dans le temps. La nature des interactions entre divers silanes et la cellulose a été testée, et a révélé que le greffage, réalisé avec succès dans ce travail, relève d'interactions fortes. Enfin, deux types de fibres (résineux et feuillus) ont été utilisés afin de mesurer le potentiel d'utilisation des organosilanes pour répondre à une problématique industrielle impliquant les propriétés mécaniques du papier et sa douceur. Des résultats mitigés ont été obtenus, bien que le succès du procédé de greffage ait été avéré pour les différentes fibres. / This dissertation describes the chemical modification of cellulosic fibers by organosilanes. The reactions of silanes bearing various functional groups were carried out in pure aqueous solution and followed in-situ by nuclear magnetic resonance spectrometry. The effect of pH, concentration, and temperature on the reaction kinetics was studied. Aminosilanes could be processed in conditions similar to those commonly used in the papermaking. Furthermore, the adsorption of the most promising grafting agents on model cellulose surfaces was investigated by mean of a quartz crystal microbalance, and the effect of the same parameters was evaluated. This study showed that a good surface coverage is attained rapidly, i.e., within only a few minutes. Then, a slower but continuous adsorption was observed over time. The nature of the interactions between various silanes and cellulose was tested. It was shown that the grafting was successfully performed, thus giving rise to the formation of strong interactions between the adsorbate and the adsorbent. Finally, two types of fibers (softwood and hardwood) were used in order to evaluate the effect of organosilanes on mechanical properties and the softness of paper. The results obtained showed quite modest effects, even though the success of the grafting was assessed on both type of fibers.

Les maladies cardiovasculaires sont l’une des principale causes de mortalité dans le monde, engendrant le décès de plus de 17 millions de personnes par an. Ce chiffre éloquent augmentera jusqu’à atteindre selon l’OMS 23,4 millions de décès en 2030. Ces maladies sont associées à un rétrécissement de la lumière des vaisseaux sanguins qui peut entrainer une occlusion partielle ou complète du vaisseau. Le traitement le plus souvent utilisé est un traitement chirurgical visant à créer un pont qui va contourner la section obstruée, ou une section lésée.Actuellement, les conduits les plus utilisés pour les greffes sont les vaisseaux autologues, à savoir la veine saphène ou l’artère thoracique interne. Seulement, ces substituts ne peuvent être utilisés en remplacement que s’ils sont sains. L’alternative aux vaisseaux autologue est l’utilisation de substituts synthétiques. Due à un certain manque de biocompatibilité de ces greffons synthétiques, après quelques années seulement, un phénomène de thrombose s’installe, en cause ; l’absence de cellules endothéliales (CEs) qui recouvrent l’intérieur du substitut.Le point clé réside ici dans la fabrication d’un matériau capable de fournir au CEs un environnement favorable à leur adhésion et leur prolifération pour permettre la génération d’un endothélium à l’intérieur d’un substitut synthétique. In vivo, les cellules capables de coloniser de tels matériaux sont les cellules progénitrices endothéliales, ces cellules sont capables de se différencier en cellules endothéliales matures et possèdent une capacité de prolifération supérieure aux cellules matures. Elles sont capables de réparer les vaisseaux et pourront donc être ciblées afin d’être recrutées in situ et ainsi endothélialiser le biomatériau.C’est dans ce contexte que nous avons choisi de modifier de façon chimique la surface d’un matériau model, un film de PET avec quatre principes actifs innovants sélectionnés pour leur capacité à induire l’adhésion des cellules ou leur différentiation pour permettre la régénération d’un endothélium à la surface du matériau.Ce projet a permis dans un premier temps de mettre au point un protocole pour greffer des principes actifs de façon covalente avec une densité reproductible et de façon microstructurée en utilisant la photolithographie. Ici, les peptides GRGDS et GHM ont été greffés pour améliorer l’adhésion des cellules, le dernier étant spécifique aux cellules endothéliales progénitrices. Le peptide SFLLRN et la sitagliptine ont été greffés pour induire ou accélérer la différenciation des EPCs en CEs matures. Toutes les surfaces ont été caractérisées pour valider le greffage covalent et connaitre la densité de molécules bioactives greffée.D’autre part avec une caractérisation approfondie des EPCs issues du sang de cordon ombilical, certains gènes caractéristiques des cellules souches et endothéliales ont été suivis par immunofluorescence et RT-qPCR pour déterminer leur état de différenciation. Ce travail n’aura été possible qu’après avoir déterminé quels gènes de références nous pouvions utiliser pour étudier le phénotype de trois types cellulaires à savoir, les cellules mononuclées CD34+, les EPCs et des CEs matures (extraites de la veine saphène). [...] En conclusion générale, ce projet prouve que la modification de surfaces des substituts avec des molécules bioactives est indispensable pour rendre le matériau attractif et pour régénérer un endothélium à la surface de celui-ci. Ce travail nous a aidé souligner l’importance de comprendre le comportement des EPCs et leur cinétique de différenciation pour leur utilisation en ingénierie vasculaire. / Cardiovascular disease is one of the leading causes of death in the world, killing more than 17 million people a year. This eloquent figure will increase to 23.4 million deaths in 2030, according to the WHO. These diseases are associated with a narrowing of the lumen of the blood vessels that may cause partial or complete occlusion of the vessel. The treatment most often used is a surgical treatment designed to create a bridge that will bypass the obstructed section or an injured section.Currently, the most used conduits for transplants are autologous vessels, namely the saphenous vein or the internal thoracic artery. Only these substitutes can only be used as a replacement if they are healthy. The alternative to autologous vessels is the use of synthetic substitutes. Due to a certain lack of biocompatibility of these synthetic grafts, after only a few years, a phenomenon of thrombosis sets in; the absence of endothelial cells (ECs) that cover the interior of the substitute.The key point here lies in the manufacture of a material capable of providing the ECs with a favorable environment for their adhesion and proliferation to allow the generation of an endothelium within a synthetic substitute. In vivo, cells capable of colonizing such materials are endothelial progenitor cells, these cells are capable of differentiating into mature endothelial cells and possess a higher proliferation capacity than mature cells. They are able to repair the vessels and can, therefore, be targeted to be recruited in situ and thus endothelialize the biomaterial.It is in this context that we have chosen to chemically modify the surface of a model material, a PET film with four innovative active ingredients selected for their ability to induce cell adhesion or differentiation to allow regeneration. an endothelium on the surface of the material.This project has initially made it possible to develop a protocol for grafting active ingredients covalently with a reproducible density and in a microstructured manner using photolithography. Here, the GRGDS and GHM peptides were grafted to enhance cell adhesion, the latter being specific to endothelial progenitor cells. The SFLLRN peptide and sitagliptin have been grafted to induce or accelerate the differentiation of EPCs into mature ECs. All surfaces have been characterized to validate covalent grafting and to know the density of grafted bioactive molecules.On the other hand, with a thorough characterization of EPCs from umbilical cord blood, some characteristic genes of stem and endothelial cells were followed by immunofluorescence and RT-qPCR to determine their state of differentiation. This work will have been possible only after determining which reference genes we could use to study the phenotype of three cell types namely, CD34 + mononuclear cells, EPCs and mature ECs (saphenous vein extract). [...] As a general conclusion, this project proves that surface modification of substitutes with bioactive molecules is essential to make the material attractive and to regenerate an endothelium on the surface of it. This work has helped us emphasize the importance of understanding the behavior of EPCs and their kinetics of differentiation for their use in vascular engineering.