Spelling suggestions: "subject:"[een] HYBRID FIBER"" "subject:"[enn] HYBRID FIBER""
1 |
Carbon Nanotube-Based Composite Fibers for Supercapacitor ApplicationAdusei, Paa Kwasi 01 October 2019 (has links)
No description available.
|
2 |
[en] CATV NEW TECNOLOGIES / [pt] NOVAS TECNOLOGIAS PARA REDES DE TELEVISÃO A CABOLOURDES DEL ROCIO DE LA CRUZ BERMEO 22 August 2006 (has links)
[pt] A presente dissertação pretende descrever e analisar as
potencialidades futuras oferecidas por sistemas CATV
operando serviços de comunicação iterativos e de faixa
larga. Neste contexto, visando determinar as configurações
mais adequadas para a parte óptica da rede, são analisadas
diversas alternativas de implementação envolvendo os
dispositivos constituintes básicos: laser, modulador
externo, EDFA, e fibra, sendo neste último caso, tanto a
utilização de fibra padrão quanto a de dispersão deslocada.
Dentro do espírito de serviços de faixa larga, implementa-
se em laboratório um sistema WDM com duas portadoras
ópticas. A primeira, em 1310 nm, é modulada em intensidade
com 2.48 Gbits/s. a segunda, em 1550nm, é modulada em AM-
VSB. As interferências mútuas são então medidas e
confrontadas com resultados previstos teoricamente,
validando este último modelo. A formulação teórica permite
então prever a deterioração mutua em um WDM com duas
portadoras digitais em 2.48Gbit/s. Os resultados obtidos
sugerem a viabilidade deste último arranjo para portar
vídeo digitalizado. Dando seqüência, são apresentadas
novas soluções para compressão de vídeo, técnicas de
modulação e tecnologias de transporte.
Finalmente, os resultados obtidos anteriormente, tanto os
práticos quanto os teóricos e os simulados, são usados
para propor novas arquiteturas de redes de CATV
explicitando as sugestões para o caso de redes HFC
(preferencialmente destinado a operadoras de TV a cabo) e
também para configurações FTTC, estas últimas,
preferencialmente destinadas às operadoras telefônicas. / [en] This work is aiming at discussing the future possibilities
the CATV systems are likely to offer, concerning iterative
communications and broadband services. In what concerns
the system optical section, a search is carried out in
order to reach suitable arrangements and configurations
concerning the basic used components, namely: laser,
external modulator, EDFA and the optical fiber. Both
standard and dispersion shifted fiber utilization are
considered. Considering broadband utilization, a practical
experiment is carried out. A two carrier WDM system is
tested in the laboratory. The first carrier - 1310 nm - is
digitally modulated at 2.48 Gbit/s, while the second one -
1550 nm - carries an AM-VSB modulation. Crosstalk is
measured and the obtained results are compared with those
from a proposed theoretical model. A satisfactory
agreement validates the model. Next, the same model is
then used for predicting crosstalk level in another two
carrier WDM, however now, with both carriers being
digitally modulated at 2.48 Gbit/s. the obtained results
suggest that this last arrangement is worthwhile to be
used for efficiently carrying digital video. A discussion
on new solutions for video compression, modulation formats
and transport techniques is follwed.
The work is closed with a number of new CATV network
solutions being suggested. Previously obtained results and
performed suggestions are used for achieving two basiv
lines of applications. The first one is based on HFC
arrangements, mainly conceived for cable TV operators. The
second on is based on FTTH arrangements, being this last
suggestion better suited for traditional telephone
companies.
|
3 |
Microescultura por laser de superfícies metálicas para manufatura de laminados híbridos metal/fibra / Laser microesculpture of metallic surfaces to hybrid fiber-metal laminatesDias, Rita de Cássia Costa 22 February 2013 (has links)
Este trabalho objetivou a manufatura de laminados híbridos metal-fibra (LMF) empregando-se chapas com 0,5 mm de espessura de liga-\'TI\'6\'AL\'4\'V\' com superfícies modificadas por laser de fibra de modo a otimizar a sua adesão com polímero termoplástico poli-sulfeto de fenileno (PPS). Observou-se que a microtextura superficial da liga metálica dependeu fortemente da potência do feixe laser, quando potências mais baixas levaram à verdadeira texturização da superfície metálica, enquanto que potências mais elevadas conduziram à ablação da mesma. A texturização superficial metálica sob laser de baixa potência aparentou ser a condição mais apropriada para a adesão metal-polímero por ancoragem mecânica de macromoléculas, o que foi contrabalanceado por elevados níveis de tensão residual das chapas metálicas, gerando grande distorção das mesmas e inviabilizando sua utilização. O emprego de uma potência intermediária (160 W) mostrou-se propício à otimização entre a adesão física entre metal-polímero e o nível de tensões residuais criado nas chapas metálicas. Concluiu-se que os espécimes extraídos do centro dos laminados metal-fibra exibem uma tensão limite média para falha por cisalhamento interlaminar consideravelmente superior à dos espécimes usinados a partir da borda dos LMF. O LMF manufaturado sob maiores pressão e temperatura exibiu uma maior compactação e melhor consolidação, culminando num máximo desempenho médio sob carga de cisalhamento interlaminar. Evidências de uma correlação entre o mecanismo de falha por cisalhamento interlaminar do corpo de prova e o seu nível de resistência a este tipo de carregamento mecânico foram documentadas e discutidas. / This work aimed at manufacturing hybrid fiber-metal laminates (FML) by employing 0,5 mm-thick \'TI\'6\'AL\'4\'V\'-alloy plaques with fiber laser modified surface in order to optimize metal adhesion with poli-phenylene sulfide (PPS) thermoplastic polymer. The surface microtexture of metallic alloy strongly depended upon the laser power, inasmuch as low-power laser led to true texturization of metal surface, whereas high-power laser light drove to its ablation. Surface metal texturization under low-power laser apparently was the most appropriate condition to metal-polymer adhesion via mechanical entanglement of macromolecules, which was offset by high levels of residual stresses on metallic plaques, bringing them quite warped and useless. The use of an intermediate laser power (160 W) has been shown benign to the optimization between metal-polymer physical adhesion and the residual stress level created in the metal plates. It has been concluded that testpieces machined from the FML central position exhibited average ultimate interlaminar shear strenght considerably higher than those extracted from the FML borders. The FML manufactured under higher pressure and temperature was more compacted and better consolidated, so that it displayed the greatest average performance under interlaminar shear loading. Evidences of a correlation between the failure mechanism by interlaminar shearing of test coupon and its allowance to this type of mechanical loading were documented and discussed.
|
4 |
Microescultura por laser de superfícies metálicas para manufatura de laminados híbridos metal/fibra / Laser microesculpture of metallic surfaces to hybrid fiber-metal laminatesRita de Cássia Costa Dias 22 February 2013 (has links)
Este trabalho objetivou a manufatura de laminados híbridos metal-fibra (LMF) empregando-se chapas com 0,5 mm de espessura de liga-\'TI\'6\'AL\'4\'V\' com superfícies modificadas por laser de fibra de modo a otimizar a sua adesão com polímero termoplástico poli-sulfeto de fenileno (PPS). Observou-se que a microtextura superficial da liga metálica dependeu fortemente da potência do feixe laser, quando potências mais baixas levaram à verdadeira texturização da superfície metálica, enquanto que potências mais elevadas conduziram à ablação da mesma. A texturização superficial metálica sob laser de baixa potência aparentou ser a condição mais apropriada para a adesão metal-polímero por ancoragem mecânica de macromoléculas, o que foi contrabalanceado por elevados níveis de tensão residual das chapas metálicas, gerando grande distorção das mesmas e inviabilizando sua utilização. O emprego de uma potência intermediária (160 W) mostrou-se propício à otimização entre a adesão física entre metal-polímero e o nível de tensões residuais criado nas chapas metálicas. Concluiu-se que os espécimes extraídos do centro dos laminados metal-fibra exibem uma tensão limite média para falha por cisalhamento interlaminar consideravelmente superior à dos espécimes usinados a partir da borda dos LMF. O LMF manufaturado sob maiores pressão e temperatura exibiu uma maior compactação e melhor consolidação, culminando num máximo desempenho médio sob carga de cisalhamento interlaminar. Evidências de uma correlação entre o mecanismo de falha por cisalhamento interlaminar do corpo de prova e o seu nível de resistência a este tipo de carregamento mecânico foram documentadas e discutidas. / This work aimed at manufacturing hybrid fiber-metal laminates (FML) by employing 0,5 mm-thick \'TI\'6\'AL\'4\'V\'-alloy plaques with fiber laser modified surface in order to optimize metal adhesion with poli-phenylene sulfide (PPS) thermoplastic polymer. The surface microtexture of metallic alloy strongly depended upon the laser power, inasmuch as low-power laser led to true texturization of metal surface, whereas high-power laser light drove to its ablation. Surface metal texturization under low-power laser apparently was the most appropriate condition to metal-polymer adhesion via mechanical entanglement of macromolecules, which was offset by high levels of residual stresses on metallic plaques, bringing them quite warped and useless. The use of an intermediate laser power (160 W) has been shown benign to the optimization between metal-polymer physical adhesion and the residual stress level created in the metal plates. It has been concluded that testpieces machined from the FML central position exhibited average ultimate interlaminar shear strenght considerably higher than those extracted from the FML borders. The FML manufactured under higher pressure and temperature was more compacted and better consolidated, so that it displayed the greatest average performance under interlaminar shear loading. Evidences of a correlation between the failure mechanism by interlaminar shearing of test coupon and its allowance to this type of mechanical loading were documented and discussed.
|
5 |
Desenvolvimento de compósitos cimentícios avançados à base de pós-reativos com misturas híbridas de fibras e reduzido impacto ambiental / Development of advanced cementitious composites of reactive powder with hybrid fiber mixture and reduced environmental impactChrist, Roberto 20 February 2014 (has links)
Submitted by Vanessa Nunes (vnunes) on 2015-03-31T13:19:31Z
No. of bitstreams: 1
RobertoChrist.pdf: 9317574 bytes, checksum: 23b19b5dd98381b184ffb8f3c20b2951 (MD5) / Made available in DSpace on 2015-03-31T13:19:31Z (GMT). No. of bitstreams: 1
RobertoChrist.pdf: 9317574 bytes, checksum: 23b19b5dd98381b184ffb8f3c20b2951 (MD5)
Previous issue date: 2014-02-20 / itt Performance - Instituto Tecnológico em Desempenho da Construção Civil / O desenvolvimento de novos concretos vem sendo ampliado ao longo dos anos, o que ocorre paralelamente ao aprimoramento dos cálculos estruturais e ao maior conhecimento sobre as propriedades dos materiais, o que conduz os projetistas ao desenvolvimento de estruturas que necessitam ter características específicas. Com isso surge a necessidade de se desenvolver concretos especiais, que apresentam elevada resistência mecânica e durabilidade. O concreto de pós reativos, também chamado de CPR, é um exemplo destes materiais. Trata-se de um concreto de ultra alto desempenho, com elevada resistência mecânica, extremamente dúctil e de baixa porosidade. Este tipo de concreto apresenta propriedades mecânicas superiores em comparação aos concretos de alta resistência, chegando a resistências à compressão de 200 MPa, à tração de 45MPa e módulo de elasticidade superior a 50 GPa. O consumo de cimento neste tipo de concreto pode atingir 800 kg/m3, além de incorporar elevado volume de sílica ativa. A otimização granular dos constituintes, realizada através de métodos de empacotamento de partículas, faz com que seja possível obter um material com o mínimo de vazios e elevada densidade. As fibras introduzidas no composto proporcionam elevada ductilidade. Neste trabalho, parte do cimento Portland foi substituído por cinza volante, para desenvolver um CPR com baixo consumo de aglomerantes. Também foi estudada a incorporação de dois tipos de fibras, ou hibridização, para uma matriz de CPR com menor consumo de cimento. A introdução de dois tipos distintos de fibras proporciona ao material maior sinergia, diminuindo a formação e a propagação de fissuras durante o carregamento. Os resultados obtidos nesta pesquisa mostram que a substituição parcial do cimento por cinza volante apresentou melhor desempenho mecânico, atingindo resistência à compressão de aproximadamente 190 MPa com 30% de adição. A incorporação de dois tipos distintos de fibras, aço e polipropileno em teores de 80% e 20% respectivamente, proporcionou ao material elevada resistência à tração na flexão e tenacidade. Portanto, é possível dosar CPR com menores consumos de cimento e uso de dois tipos de fibras, melhorando as propriedades da mistura e obtendo um compósito com reduzido impacto ambiental. / The development of new concretes is being expanded over the years, withal the improvements in structural design, along the increased knowledge of materials properties, which leads the designers to develop structures with specific requirements. It arises the need of the development of special concretes, with have enhanced mechanical strength and durability. Reactive powder concrete, also called RPC, is an example of these materials. This is an ultra-high-performance concrete with high mechanical strength, extremely ductile and low porosity. This type of concrete has superior mechanical properties compared to high strength concrete, reaching compressive strengths of 200 MPa, tensile strengths of 45 MPa and modulus higher than 50 GPa. The cement consumption in this type of concrete may reach 800 kg/m3, while incorporating high volumes of silica fume. The optimization of granular constituents accomplished by particle packing methods provides a material with a minimum of voids and also high density. The fiber introduced into the material compound provides high ductility. On this report, fly ash was used to replace some part of the cement, aiming the development of a RPC with low agglomerate consumption. It was also studied the use of two types of fiber, or hybridization, to a RPC matrix array of CPR with less consumption of cement. The introduction of two distinct types of fibers gives the material improved synergy, decreasing the formation and propagation of cracks during the charging. The results obtained in this study show that the partial replacement of cement by fly ash gives better mechanical performance, reaching the compressive strength of approximately 190 MPa with 30% addition. The incorporation of two different types of fibers, steel and polypropylene at levels of 80% and 20% respectively, provided the materials high tensile strength and toughness. Therefore, it is possible to compose an RPC with lower cement consumption and use of two types of fibers, improving the properties of the mixture and obtaining a composite with reduced environmental impact.
|
6 |
Use of non-steel fiber reinforcement in concrete tunnel liningSeo, Sang Yeon 26 January 2011 (has links)
Fiber reinforcement is being widely used in concrete tunnel linings these days. Using fiber reinforcement can save not only cost, but also labor and time spent on construction. However, many owners hesitate to incorporate fiber reinforcement in tunnel lining due to lack of experience with and knowledge of the behavior of fiber reinforced concrete (FRC)
In this study, fiber reinforced concrete was made with various kinds of fibers such as steel fiber, macro-synthetic fiber and hybrid fiber (a blend of macro-synthetic fiber and glass fiber). Many experimental tests were performed to investigate the compressive, flexural and shear behavior of fiber reinforced concrete. In addition to the structural capacity of FRC, the distribution of fiber reinforcement inside the concrete matrix was investigated. Test results of these experimental tests were thoroughly examined to compare and quantify the effects of fiber reinforcement. Next, the test results were used to generate axial force-bending moment interaction diagrams based on current design approaches. In addition, the current design approaches were modified to estimate the accurate and exact value of bending moment. Fiber reinforcement clearly improved the structural performance of tunnel lining. The post-peak flexural and shear strength was significantly influenced by the type and amount of fiber reinforcement. / text
|
7 |
Forecasting Codeword Errors in Networks with Machine Learning / Prognostisering av kodordsfel i nätverk med maskininlärningHansson Svan, Angus January 2023 (has links)
With an increasing demand for rapid high-capacity internet, the telecommunication industry is constantly driven to explore and develop new technologies to ensure stable and reliable networks. To provide a competitive internet service in this growing market, proactive detection and prevention of disturbances are key elements for an operator. Therefore, analyzing network traffic for forecasting disturbances is a well-researched area. This study explores the advantages and drawbacks of implementing a long short-term memory model for forecasting codeword errors in a hybrid fiber-coaxial network. Also, the impact of using multivariate and univariate data for training the model is explored. The performance of the long short-term memory model is compared with a multilayer perceptron model. Analysis of the results shows that the long short-term model, in the vast majority of the tests, performs better than the multilayer perceptron model. This result aligns with the hypothesis, that the long short-term memory model’s ability to handle sequential data would be superior to the multilayer perceptron. However, the difference in performance between the models varies significantly based on the characteristics of the used data set. On the set with heavy fluctuations in the sequential data, the long short-term memory model performs on average 44% better. When training the models on data sets with longer sequences of similar values and with less volatile fluctuations, the results are much more alike. The long short-term model still achieves a lower error on most tests, but the difference is never larger than 7%. If a low error is the sole criterion, the long short-term model is the overall superior model. However, in a production environment, factors such as data storage capacity and model complexity should be taken into consideration. When training the models on multivariate and univariate datasets, the results are unambiguous. When training on all three features, ratios of uncorrectable and correctable codewords, and signal-to-noise ratio, the models always perform better. That is, compared to using uncorrectable codewords as the only training data. This aligns with the hypothesis, which is based on the know-how of hybrid fiber-coaxial experts, that correctable codewords and signal-to-noise ratio have an impact on the occurrence of uncorrectable codewords. / På grund av den ökade efterfrågan av högkvalitativt internet, så drivs telekomindustrin till att konsekvent utforska och utveckla nya teknologier som kan säkerställa stabila och pålitliga nätverk. För att kunna erbjuda konkurrenskraftiga internettjänster, måste operatörerna kunna förutse och förhindra störningar i nätverken. Därför är forskningen kring hur man analyserar och förutser störningar i ett nätverk ett väl exploaterat område. Denna studie undersökte för- och nackdelar med att använda en long short-term memory (LSTM) för att förutse kodordsfel i ett hybridfiber-koaxialt nätverk. Utöver detta undersöktes även hur multidimensionell träningsdata påverkade prestandan. I jämförelsesyfte användes en multilayer perceptron (MLP) och dess resultat. Analysen av resultaten visade att LSTM-modellen presterade bättre än MLP-modellen i majoriteten av de utförda testerna. Men skillnaden i prestanda varierade kraftigt, beroende på vilken datauppsättning som användes vid träning och testning av modellerna. Slutsatsen av detta är att i denna studie så är LSTM den bästa modellen, men att det inte går att säga att LSTM presterar bättre på en godtycklig datauppsättning. Båda modellerna presterade bättre när de tränades på multidimensionell data. Vidare forskning krävs för att kunna determinera om LSTM är den mest självklara modellen för att förutse kodordsfel i ett hybridfiber-koaxialt nätverk.
|
8 |
Unsupervised Anomaly Detection and Root Cause Analysis in HFC Networks : A Clustering ApproachForsare Källman, Povel January 2021 (has links)
Following the significant transition from the traditional production industry to an informationbased economy, the telecommunications industry was faced with an explosion of innovation, resulting in a continuous change in user behaviour. The industry has made efforts to adapt to a more datadriven future, which has given rise to larger and more complex systems. Therefore, troubleshooting systems such as anomaly detection and root cause analysis are essential features for maintaining service quality and facilitating daily operations. This study aims to explore the possibilities, benefits, and drawbacks of implementing cluster analysis for anomaly detection in hybrid fibercoaxial networks. Based on the literature review on unsupervised anomaly detection and an assumption regarding the anomalous behaviour in hybrid fibercoaxial network data, the kmeans, SelfOrganizing Map, and Gaussian Mixture Model were implemented both with and without Principal Component Analysis. Analysis of the results demonstrated an increase in performance for all models when the Principal Component Analysis was applied, with kmeans outperforming both SelfOrganizing Map and Gaussian Mixture Model. On this basis, it is recommended to apply Principal Component Analysis for clusteringbased anomaly detection. Further research is necessary to identify whether cluster analysis is the most appropriate unsupervised anomaly detection approach. / Följt av övergången från den traditionella tillverkningsindustrin till en informationsbaserad ekonomi stod telekommunikationsbranschen inför en explosion av innovation. Detta skifte resulterade i en kontinuerlig förändring av användarbeteende och branschen tvingades genomgå stora ansträngningar för att lyckas anpassa sig till den mer datadrivna framtiden. Större och mer komplexa system utvecklades och således blev felsökningsfunktioner såsom anomalidetektering och rotfelsanalys centrala för att upprätthålla servicekvalitet samt underlätta för den dagliga driftverksamheten. Syftet med studien är att utforska de möjligheterna, för- samt nackdelar med att använda klusteranalys för anomalidetektering inom HFC- nätverk. Baserat på litteraturstudien för oövervakad anomalidetektering samt antaganden för anomalibeteenden inom HFC- data valdes algritmerna k- means, Self- Organizing Map och Gaussian Mixture Model att implementeras, både med och utan Principal Component Analysis. Analys av resultaten påvisade en uppenbar ökning av prestanda för samtliga modeller vid användning av PCA. Vidare överträffade k- means, både Self- Organizing Maps och Gaussian Mixture Model. Utifrån resultatanalysen rekommenderas det således att PCA bör tillämpas vid klusterings- baserad anomalidetektering. Vidare är ytterligare forskning nödvändig för att avgöra huruvida klusteranalys är den mest lämpliga metoden för oövervakad anomalidetektering.
|
9 |
Tensile behavior of high-performance cement-based composites with hybrid reinforcement subjected to quasi-static and impact loadingGong, Ting 17 February 2021 (has links)
Hochduktile Betone (Engl.: Strain-Hardening Cement-based Composites – SHCC) und Textilbetone (engl.: Textile Reinforced Concrete – TRC) sind zwei neuartige Faserbetone, die ein duktiles und dehnungsverfestigendes Zugverhalten aufweisen. SHCC bestehen aus feinkörnigen Zementmatrizen und kurzen Hochleistungspolymerfasern, während TRC eine Kombination aus feinkörnigen Zementmatrizen und kontinuierlichen zwei- oder dreidimensionalen Textilschichten darstellt. Letztere bestehen aus Multifilamentgarnen aus Kohlenstoff, alkalibeständigem Glas oder Polymerfasern. Die hohe elastische Verformbarkeit beider Verbundwerkstoffe bis zum Erreichen der Zugfestigkeit entsteht aus der sukzessiven Bildung multipler feiner Risse. Neben der hervorragenden Risskontrolle und Duktilität weisen diese Verbundwerkstoffe ein hohes Energieabsorptionsvermögen auf, was in Bezug auf kurzzeitdynamische Belastungen eine durchaus erstrebenswerte Eigenschaft darstellt.
Obwohl SHCC eine höhere Dehnungskapazität als herkömmliche TRC zeigen, weisen die Textilbetone eine erheblich höhere Zugfestigkeit auf. Darüber hinaus besitzen die textilbewehrten Betone deutlich niedrigere Einflüsse von Anwendungstechnologie und Maßstab auf das Zugverhalten, d. h. eine bessere Robustheit. Daher stellt die Kombination dieser beiden Bewehrungskonzepte einen vielversprechenden Ansatz dar. Während die Kurzfasern für eine bessere Risskontrolle und Erstrissfestigkeit sorgen, sichern die Textilgelege eine hohe Zugfestigkeit sowie Steifigkeit im gerissenen Zustand und eine gleichmäßige Verteilung der Kräfte in der Verstärkungsschicht bzw. im Bauteil. Dieser synergetische Effekt kann jedoch nur durch eine zielgerichtete Materialentwicklung erreicht werden, die eine grundlegende Materialcharakterisierung unter verschiedenen Belastungsszenarien erfordert.
Im Rahmen des DFG-finanzierten Graduiertenkollegs GRK 2250 „Impaktsicherheit von Baukonstruktionen durch mineralisch gebundene Komposite“ werden duktile und Impakt resistente Komposite entwickelt, charakterisiert und erprobt, die als dünne Verstärkungsschichten auf bestehende Konstruktionen bzw. Bauelemente aufgetragen werden und dadurch deren Widerstandsfähigkeit und Resilienz gegen extreme kurzzeitdynamische Beanspruchungen signifikant erhöhen. Die in der vorliegenden Arbeit vorgestellten Ergebnisse wurden im Rahmen des A3-Projektes innerhalb des GRK 2250/1 erzielt. Ziel dieser Arbeit war es, die grundlegenden mechanischen Eigenschaften und die Dehnratenabhängigkeit von mineralisch gebundenen Kompositen mit hybrider Faserbewehrung zu erfassen und zu beschreiben. Das Forschungskonzept besteht aus systematischen und parametrischen Untersuchungen der einzelnen Komponenten (Faser, Textil, zementgebundene Matrix), ihres Verbundes und der entsprechenden Verbundwerkstoffe. Hierfür wurden zweckbestimmte Prüfkonfigurationen und dreidimensionale Messverfahren angewandt, die in anderen Projekten des GRK 2250/1 entwickelt wurden. Außer uniaxialen, quasistatischen und dynamischen Zugversuchen wurden quasistatische und dynamische Einzelgarnauszugsversuche durchgeführt. Die wichtigsten untersuchten Materialparameter waren die Art der Kurzfaserbewehrung und der Textilien (Material, geometrische und Oberflächeneigenschaften, Art der Tränkung usw.).
Auf Basis der mechanischen Experimente wurde ein analytisches Modell eingesetzt und angepasst, dass das Zugverhalten solcher Komposite in Abhängigkeit von verschiedenen Materialparametern abbilden soll.
Zusätzlich zu der detaillierten Beschreibung der Materialeigenschaften, der maßgebenden Mechanismen und synergetischen Effekte bilden die erzielten Ergebnisse eine umfangreiche experimentelle Basis für eine empirische und Modell gestützte Weiterentwicklung und Optimierung dieser Verbundwerkstoffe mit Hinblick auf wirtschaftliche und ökonomische Aspekte. / Strain-hardening cement-based composites (SHCC) and textile-reinforced concrete (TRC) are two novel types of fiber-reinforced cementitious composites that exhibit ductile, strain-hardening tensile behavior. SHCC comprises fine-grained cementitious matrices and short, high-performance polymer fiber, while TRC is a combination of a fine-grained, cementitious matrix and continuous two- or three- dimensional textile layers of multi-filament yarns, usually made of carbon or alkali-resistant glass. Both composites yield high inelastic deformations in a strain-hardening phase due to the successive formation of multiple fine cracks. Such cracking behavior stands for high energy absorption of the composites when exposed to extreme loading, without abrupt loss of load-bearing capacity.
In comparative terms, SHCC shows superior strain capacity, while TRC yields considerably higher tensile strength. The addition of short fibers strengthens the matrix by efficiently restraining the micro-cracks’ growth and reducing spallation, while the textile reinforcement ensures a secure confinement of the reinforced concrete element (substrate to be strengthened), as well as a favorable stress distribution. The combination of SHCC and textile reinforcement is expected to deliver high tensile strength and stiffness in the strain-hardening stage along with pronounced multiple cracking. In order to achieve a favorable synergetic effect, a purposeful material design is required based on a clear understanding of the mechanical interactions in the composites.
In the framework of the DFG Research Training Group GRK 2250, which aims at enhancing structural impact safety through thin strengthening layers made of high-performance mineral-based composites, this work focuses on developing hybrid fiber-reinforced cementitious materials to be applied on the impact rear side. The development concept builds upon a systematic investigation of various aspects of the mechanical behaviors of SHCC and textile at quasi-static and impact strain rates, including the bond properties of fiber to matrix and textile to matrix. Accordingly, uniaxial quasi-static tension tests were first performed on SHCC, bare textile, and hybrid-reinforced composite specimens. The parameters under investigation were types of short fiber and textile reinforcements, reinforcing the ratio for textile as well as bond properties between textile and the surrounding SHCC. Furthermore, impact tension tests were performed to study the strain rate effect on the synergetic composite response. Finally, single-yarn pull-out tests were carried out under both quasi-static and impact loading rates to supplement the comparative assessment of the hybrid fiber-reinforced composites. These tests yielded shear strength-related parameters for quantifying the bond properties of different materials, which were then used as input of the analytical model developed to describe the mechanics of crack propagation and tension stiffening effect of textile-reinforced composites without short fibers. This model is the first step towards a comprehensive analytical description of the tensile behavior of hybrid fiber-reinforced composites based on the experimental data and input parameters attained through the work at hand.
|
10 |
[pt] COMUNICAÇÕES ÓPTICAS DE ESPAÇO LIVRE POR CONTAGEM DE FÓTONS PARA USO EM ENLACES ENTRE EMBARCAÇÕES E ESTAÇÕES COSTEIRAS / [en] FREE-SPACE PHOTON COUNTING OPTICAL COMMUNICATIONS FOR USE IN VESSEL-TO-SHORE LINKSRAFAEL FREITAS BARBOSA 23 February 2021 (has links)
[pt] Este trabalho apresenta o estudo de comunicação óptica quântica no
infravermelho, utilizando um sistema híbrido fibra-óptica – espaço-livre,
como prova de princípio para o estabelecimento de chaves secretas a fim de
utilização em criptografia do tipo one-time pad. Ao modular a polarização
da luz de um laser em polarizações ortogonais, podem-se codificar os bits
clássicos 1 e 0 em cada uma dessas polarizações, sendo detectadas por
detectores contadores de fótons únicos, e, assim, utilizar o canal quântico
para transmissão dos bits quânticos entre dois interlocutores, utilizandoos
para o estabelecimento da chave criptográfica, que pode ser usada em
qualquer tipo de informação a ser transmitida por um canal clássico ou
quântico. Ao realizar a transmissão em espaço-livre, sujeita a variações climáticas,
como temperatura atmosférica, luz solar, presença de nuvens, chuva e
vento, foi também estudada a influência destes fenômenos na qualidade
da transmissão e dos dados obtidos. Os resultados experimentais demonstraram consistência com a teoria e com outros trabalhos publicados na área até esta data com relação às taxas de
erro de bit quântico e também à taxa de transmissão de bits. As taxas
de erro obtidas, por estarem abaixo do limiar teórico para segurança da
informação em comunicação quântica, provam, ainda, a possibilidade de
estabelecimento de chave secreta para criptografia através do uso de distribuição
quântica das chaves (QKD). Os resultados também apresentaram
boa qualidade da informação recuperada após a descriptografia. / [en] This work presents the study of optical quantum communication in
the infrared region, using a hybrid optical-fiber – free-space system, as
proof of principle for the agreement on secret keys by two parties for use
in one-time pad encryption. By modulating the polarization of laser light
into orthogonal polarizations, one can encode the classic bits 1 and 0
in each of these polarizations, being detected by single photon counter
detectors, and can use the quantum channel to transmit the quantum bits
between two interlocutors. It is then possible to use those bits to establish
the cryptographic key, which can be used in any type of information to be
transmitted by a classic or quantum channel.
While carrying out transmission in free space optics, subject to climatic
variations, such as atmospheric temperature, sunlight, presence of clouds
and rain, and the presence of wind, the influence of these phenomena on
the quality of transmission and on the data obtained was also studied.
The experimental results showed consistency with the theory and with other
works published to date with regard to quantum bit error rates and to the
bit rate. The error rates obtained, being below the theoretical threshold
for information security in quantum communication, further proves the
possibility of establishing a secret key for encryption through the use of
quantum key distribution (QKD). It also presented good quality on the
information recovered after decryption.
|
Page generated in 0.0611 seconds