A presença de antibióticos no ecossistema representa um sério risco à saúde humana e animal em virtude do desenvolvimento crescente de resistência bacteriana. Uma vez que a maioria dos antibióticos é persistente à degradação biológica, os processos oxidativos avançados são apontados como uma das tecnologias mais efetivas para decompor esses compostos em águas residuárias. A bacitracina zíncica (Bc-Zn) é um potente antibiótico constituído por uma mistura complexa de peptídeos não-biodegradáveis, conjugados ao zinco. Apesar de ser um antibiótico amplamente consumido na medicina humana e animal, é preocupante a escassez de estudos que investigam sua degradação e destino ambiental. O presente trabalho analisou a degradação da Bc-Zn através dos processos de fotólise direta e UV/H2O2 em diferentes condições de radiação UVC e concentração inicial de H2O2. Os parâmetros cinéticos rendimento quântico da fotólise, constantes cinéticas de pseudo-primeira ordem e constante cinéticas de segunda ordem foram satisfatoriamente estimados pela modelagem do sistema fotoquímico experimental. Os resultados revelaram que a fotólise direta permitiu degradar todos os congêneres da mistura de Bc-Zn nas maiores doses de radiação UVC empregadas. No entanto, não houve remoção de TOC após 120 minutos de irradiação. A adição de H2O2 acelerou substancialmente a fotodegradação do antibiótico, apresentando constantes cinéticas de pseudo-primeira ordem uma ordem de grandeza superiores às obtidas por fotólise direta. Além disso, remoção considerável de até 71% do TOC foi alcançada. A análise estatística demonstrou que a radiação UV foi um fator bem mais significativo para a fotodegradação da Bc-Zn em relação à concentração inicial de H2O2, sendo as melhores condições do processo alcançadas para a maior taxa específica de emissão de fótons (1,11×10-5 Einstein L-1 s-1). Ensaios biológicos com soluções tratadas por fotólise direta e UV/H2O2 indicaram remoção completa da atividade antimicrobiana residual, ainda que os produtos da fotodegradação tenham se mostrado não-biodegradáveis. Análises de toxicidade indicaram que o metal zinco presente no antibiótico é responsável pela a toxicidade no micro-organismo-teste Vibrio fischeri. Estudos adicionais devem ser realizados para identificar os sub-produtos formados, bem como para investigar a degradação da Bc-Zn em efluentes industriais reais. / The presence of antibiotics in ecosystems represents a serious risk to human and animal health, caused by the increase in bacterial resistance. Since most antibiotics resist to biological degradation, advanced oxidation processes are pointed out as the most effective technologies for degrading these compounds in wastewater. Zinc bacitracin (Bc-Zn) is a potent antibiotic with a complex mixture of non-biodegradable peptides conjugated to zinc. Despite being a widely used antibiotic in human and animal medicine, the scarcity of studies dealing with its degradation and environmental fate is a matter of concern. In this work, Bc-Zn degradation by direct photolysis and the UV/H2O2 process was investigated for different UVC radiation conditions and initial H2O2 concentrations. Kinetic parameters, namely the photolysis quantum yield, pseudo-first order kinetic constants and second-order kinetic constants, were satisfactorily estimated from experimental data by modeling the photochemical system. The results showed that all the congeners of the Bc-Zn mixture were photolyzed at the highest UVC doses applied, while no TOC removal was observed after 120 minutes of irradiation. The addition of H2O2 substantially accelerated Bc-Zn photodegradation, with pseudo-first order kinetic constants of one order of magnitude higher than those observed under direct photolysis. In addition, a remarkable removal of up to 71% of TOC was achieved. Statistical analyses showed that UV radiation had a much more important effect on Bc-Zn photodegradation in comparison with initial H2O2 concentration, with the best process conditions achieved for the highest specific photon emission rate (1.11×10-5 Einstein L-1 s-1). Biological assays carried out with the solutions treated by direct photolysis and UV/H2O2 revealed no residual antimicrobial activity, though photodegradation products remained non-biodegradable. In addition, toxicity analyses indicated that the zinc metal present in the antibiotic is responsible for the toxic effect on the test microorganism Vibrio fischeri. Finally, further studies should be performed to identify the by-products formed and to investigate Bc-Zn degradation in real industrial wastewater.

Cette thèse porte sur l’étude de la relation entre la structure et la fonction chez les cotransporteurs Na+/glucose (SGLTs). Les SGLTs sont des protéines membranaires qui se servent du gradient électrochimique transmembranaire du Na+ afin d’accumuler leurs substrats dans la cellule. Une mise en contexte présentera d’abord un bref résumé des connaissances actuelles dans le domaine, suivi par un survol des différentes techniques expérimentales utilisées dans le cadre de mes travaux. Ces travaux peuvent être divisés en trois projets. Un premier projet a porté sur les bases structurelles de la perméation de l’eau au travers des SGLTs. En utilisant à la fois des techniques de modélisation moléculaire, mais aussi la volumétrie en voltage imposé, nous avons identifié les bases structurelles de cette perméation. Ainsi, nous avons pu identifier in silico la présence d’une voie de perméation passive à l’eau traversant le cotransporteur, pour ensuite corroborer ces résultats à l’aide de mesures faites sur le cotransporteur Na/glucose humain (hSGLT1) exprimé dans les ovocytes. Un second projet a permis d’élucider certaines caractéristiques structurelles de hSGLT1 de par l’utilisation de la dipicrylamine (DPA), un accepteur de fluorescence dont la répartition dans la membrane lipidique dépend du potentiel membranaire. L’utilisation de la DPA, conjuguée aux techniques de fluorescence en voltage imposé et de FRET (fluorescence resonance energy transfer), a permis de démontrer la position extracellulaire d’une partie de la boucle 12-13 et le fait que hSGLT1 forme des dimères dont les sous-unités sont unies par un pont disulfure. Un dernier projet a eu pour but de caractériser les courants stationnaires et pré-stationaires d’un membre de la famille des SGLTs, soit le cotransporteur Na+/myo-inositol humain hSMIT2 afin de proposer un modèle cinétique qui décrit son fonctionnement. Nous avons démontré que la phlorizine inhibe mal les courants préstationnaires suite à une dépolarisation, et la présence de courants de fuite qui varient en fonction du temps, du potentiel membranaire et des substrats. Un algorithme de recuit simulé a été mis au point afin de permettre la détermination objective de la connectivité et des différents paramètres associés à la modélisation cinétique. / This thesis is about the structure/function relationship in Na+/glucose cotransporters (SGLTs). SGLTs are membrane proteins which use the Na+ transmembrane electrochemical gradient to accumulate their substrates within the cell. As an introduction, a short review of the current state of the field will be followed by a presentation of the different technics used in this work. This work can be divided in three main projects. In the first project, we investigated the structural basis of water permeation through SGLTs. By using molecular modeling technics, we have identified, in silico, a passive permeation pathway used by water to go through the cotransporter across the membrane. Using voltage-clamp volumetric measurement, we were able to corroborate these findings for hSGLT1 expressed in oocytes. A second project allowed elucidation of some of hSGLT1 structural characteristics through the use of dipicrylamine (DPA), a fluorescence acceptor whose repartition in the lipid membrane is voltage-dependant. Use of DPA concomitantly with voltage-clamp fluorescence and FRET (fluorescence resonance energy transfer) has clearly demonstrated the extracellular localisation of part of the 12-13 loop which was previously assumed to be intracellular. In addition, we have shown that hSGLT1 forms a dimeric structure where the subunits are linked by a disulfide bridge. A last project aimed at characterizing the steady-state and pre-steadystate currents of a member of the SGLT family named hSMIT2 (human Na/myo-inositol transporter 2). We showed that phlorizin is a poor inhibitor of pre-steady state currents following depolarisation, and the presence of a time, membrane potential and substrate dependent leak current. A simulated annealing algorithm was developed in order to allow objective determination of both the connectivity and the parameters associated with the optimal kinetic model.

Ce travail a pour objectif général de développer une compréhension approfondie de l’interaction du CO avec des catalyseurs anodiques dans les piles à combustible de type PEM (PEMFC), et d’évaluer son impact vis-à-vis de leur réactivité et stabilité lors de l’oxydation de l’hydrogène. Premièrement un modèle physique multi-échelle a été conçu pour simuler les performances de piles PEMFC alimentées par de l’hydrogène contenant des traces de CO. Il est basé sur la simulation Monte Carlo et la modélisation cinétique des étapes électrochimiques/chimie élémentaires. Une étude expérimentale de l’adsorption et de l’oxydation de CO simulant la technique d’ « O2 bleeding » a été utilisée pour mieux comprendre les mécanismes. Des catalyseurs de Pt ainsi que des bimétalliques PtxCoy et PtRu, supportés sur du carbone de grande aire spécifique, ont été étudiés. La spectroscopie IR (DRIFTS) et l’analyse QMS ont été utilisées pour l’étude de l’adsorption et oxydation de CO. Les défauts de surface, l’historique du catalyseur dans son interaction avec les différents gaz (H2, O2, CO), la température, la charge en Pt, la taille des particules, l’alliage de Pt avec Co ou Ru se sont révélé des paramètres clés dans la réactivité de CO avec O2. Le modèle multi-échelle a été appliqué aux catalyseurs Pt et PtxCoy. Les catalyseurs PtxCoy se révèlent plus tolérants au CO mais, en fonction du rapport Pt/Co, ils peuvent se dégrader par dissolution de Co comme démontré par nos expériences / The general objective of this work is to develop a deep understanding of the interaction of the CO with anodic catalysts in PEM Fuel Cells (PEMFCs), and to evaluate its impact on the reactivity towards the hydrogen oxidation and their stability. Firstly, a multiscale kinetic model is built up based on Monte Carlo simulation and kinetic modelling of elementary electrochemical/chemical steps as a tool to simulate the performance of PEMFCs fed with H2 containing CO traces. Experiments on CO adsorption and oxidation mimicking O2 bleeding were used to better understand the mechanisms. Monometallic Pt and bimetallic PtxCoy and PtRu catalysts supported on high surface area carbon were studied. CO adsorption and oxidation were investigated by means of DRIFT spectroscopy and QMS analysis. Defect sites (kink, edge), history of interaction with different gases (H2, O2, CO), temperature, Pt loading, particle size, alloying with Co or Ru are key parameters influencing the CO reactivity with O2. The multiscale kinetic model was applied to Pt and PtxCoy. PtxCoy nanocatalysts are shown to be highly CO tolerant but might degrade by Co dissolution in long term operation, depending on the Pt to Co ratio