O presente trabalho descreve o desenvolvimento e implementação de duas configurações distintas de um receptor optoeletrônico integrado. A primeira configuração é similar a um projeto encontrado na literatura mas apresenta diversas modificações que lhe conferiram melhor desempenho em comparação ao projeto original. A segunda configuração é uma nova proposta deste trabalho. O receptor foi desenvolvido e implementado visando sua aplicação em redes de comunicações ópticas passivas (PONs) de alta velocidade comutadas a pacote, para possibilitar a utilização da técnica de multiplexação em comprimento de onda (WDM), aumentando assim a capacidade de transmissão da rede, em particular no ramo de ligação da rede de serviços com o usuário final, denominado rede de acesso. O principal objetivo do receptor aqui desenvolvido foi proporcionar uma sintonia rápida entre os canais disponíveis na rede, possibilitando sua seleção num tempo inferior àquele necessário para a transmissão de um único pacote de informação, diminuindo assim o atraso de sintonia e, por conseguinte, a perda de informação. Para tanto, os circuitos integrados implementados e caracterizados referem-se aos circuitos de chaveamento eletrônico e do amplificador de transimpedância das duas configurações investigadas. Os dados experimentais obtidos para as duas configurações confirmaram a previsão de chaveamento dos canais de entrada num intervalo de tempo da ordem de alguns nanosegundos, o que é totalmente compatível com a velocidade de transmissão das aplicações a que se destina este receptor (aproximadamente 5 Gbits/s). Adicionalmente, são apresentados os dados experimentais relativos à freqüência de corte, ganho direto, isolação, relação on/off e características de ruído dos circuitos implementados. / The present work describes the design and implementation of two configurations of an integrated optoelectronic receiver. The first one is similar to a previously reported design but with some modifications to improve its performance. The second one is a new proposal of this work. The goal of the receiver design and implementation was its application in high bit rate packet-switched passive optical networks (PONs) employing the wavelength division multiplexing (WDM) technique to increase the network capacity, in particular on the connection branch of the network core with the final user, the access network. The main goal of the receiver design was to achieve a fast channel tuning, allowing a tuning time smaller than the required for the transmission of a single information packet, decreasing the tuning latency and, therefore, the rate of information packet loss. In order to accomplish this goal, the implemented and tested integrated circuits include the electronic switching circuit and the transimpedance amplifier for both configurations investigated. The measured data for both configurations confirm the expected input channel switching time results, of about a few nanoseconds, which is certainly useful for the expected bit rate of operation (approximate 5 Gbps). Additionally, experimental results concerning cutoff frequency and bandwidth, direct gain, isolation, on/off ratio, and noise characteristics of both implemented circuits are presented.

Les réseaux optiques dynamiques et flexibles font partie des scénarios d'évolution des réseaux de transport optique. Ceux-ci formeront la base de la nouvelle génération des réseaux optiques de demain et permettront le déploiement efficace des services tel que le Cloud Computing. Cette évolution est destinée à apporter flexibilité et automatisation à la couche optique, mais s'accompagne d'une complexité supplémentaire, notamment au niveau de la gestion et de la commande de cette toute nouvelle génération de réseau. Jusqu'à récemment, les protocoles de routage et de signalisation normalisés ont pris en compte plusieurs paramètres physiques tels que l'information spectrale de la bande passante, le format de modulation, et la régénération optique. Cependant, d'autres paramètres sont encore nécessaires (par exemple, les puissances optiques des liens, le gain des amplificateurs) afin de faire fonctionner efficacement de grands réseaux. Dans ce contexte, il y a un besoin d'étudier les réseaux optiques existants ainsi que les différentes méthodes de prise en compte de la couche photonique dans le plan de contrôle. Le but est d'avoir un réseau optique automatique, flexible et programmable, mais surtout efficace de point de vue économique et opérationnel. L'utilisation de la technologie à grille flexible a un impact sur les réseaux optiques existants, où presque tous les équipements devront être remplacés, ce qui entraînera un coût additionnel pour les opérateurs. Dans ce travail, nous étudions les réseaux optiques actuels et évaluons l'impact de la flexibilité sur les infrastructures existantes. Ensuite, nous identifions plusieurs paramètres optiques à contrôler et proposons des extensions protocolaires afin d'intégrer ces paramètres dans un plan de contrôle GMPLS. De plus, nous développons les algorithmes de routage et de signalisation qui permettent la mise en œuvre d'un plan de contrôle efficace qui répond au besoin de la flexibilité. Enfin, l'ensemble de nos propositions et de nos solutions sont évaluées sur plusieurs topologies réseaux avec des modèles de trafic différents dans le but de valider leur pertinence. / Dynamic and flexible optical networks are among the evolution scenarios of the optical transport networks. These form the basis of the new generation of optical networks of tomorrow and enable the effective deployment of services such as cloud computing. This evolution is intended to provide flexibility and automation to the optical layer. However, it results in additional complexity, particularly in terms of the management and control of this new network generation. Until recently, the standardized routing and signaling protocols have been taking into account several optical parameters like the spectral bandwidth information, modulation format, and optical regeneration. However, other parameters (e.g., link optical powers, gain of optical amplifiers) are still required in order to efficiently operate large optical networks. In this context, there is a need to study the existing optical networks and the different integration methods of the photonic layer in a control plane. The goal is to get an automatic optical network that is flexible, programmable, and at the same time efficient from an economical and operational perspective. The use of flexible grid technology has an impact on existing optical networks, where almost all the equipment must be replaced, resulting in an additional cost to network operators. In this work, we study the current optical networks and evaluate the impact of flexibility on the existing infrastructures. Then, we identify several physical parameters to be controlled and propose protocol extensions in order to integrate these parameters in the GMPLS control plane. In addition, we develop the routing and signaling algorithms that allow the implementation of an efficient control plane that addresses the need for flexibility. Finally, the set of our proposals and solutions are evaluated on multiple network topologies with different traffic patterns in order to validate their relevance.

Diploma thesis deals with the analysis of quality in digital television systems and contains theoretical description of subjective and objective assessment of quality picture methods. The thesis contains short-term and long-term analysis of quality picture of terrestrial television DVB-T. Measurements and experimentations were carried out with the help of Rohde&Schwarz DVQ analyzer of picture quality and software MPEG-2 Quality Monitor and MPEG-2 Elementary stream analyzer.

The aim of this master´s thesis is an explanation of the problem of transport optical networks with Dense Wavelength Division Multiplexing. DWDM principle, properties and limit of transmission system. Focus of thesis is also specification properties of migration transmission system to higher speed 40G, 100G and in future to 400G. Part of thesis is outlined the basic division of multiplexing system, there are discussed the basic solutions of wavelength multiplexes CWDM and DWDM, focus for the effects of nonlinear phenomena and parasitic modulation FWM, SPM and XPM in modulation DP-QPSK and 16-QAM. In practicle part we will make measurement of properties of 10G and then experimental measurement parameters on 100G.

Konventionelle, optische Transportnetze haben die Bereitstellung von High-Speed-Konnektivität in Form von langfristig installierten Verbindungen konstanter Bitrate ermöglicht. Die Einrichtungszeiten solcher Verbindungen liegen in der Größenordnung von Wochen, da in den meisten Fällen manuelle Eingriffe erforderlich sind. Nach der Installation bleiben die Verbindungen für Monate oder Jahre aktiv. Das Aufkommen von Grid Computing und Cloud-basierten Diensten bringt neue Anforderungen mit sich, die von heutigen optischen Transportnetzen nicht mehr erfüllt werden können. Dies begründet die Notwendigkeit einer Umstellung auf dynamische, optische Netze, welche die kurzfristige Bereitstellung von Bandbreite auf Nachfrage (Bandwidth on Demand - BoD) ermöglichen. Diese Netze müssen Verbindungen mit unterschiedlichen Bitratenanforderungen, mit zufälligen Ankunfts- und Haltezeiten und stringenten Einrichtungszeiten realisieren können. Grid Computing und Cloud-basierte Dienste führen in manchen Fällen zu Verbindungsanforderungen mit Haltezeiten im Bereich von Sekunden, wobei die Einrichtungszeiten im Extremfall in der Größenordnung von Millisekunden liegen können. Bei optischen Netzen für BoD muss der Verbindungsaufbau und -abbau, sowie das Netzmanagement ohne manuelle Eingriffe vonstattengehen. Die dafür notwendigen Technologien sind Flex-Grid-Wellenlängenmultiplexing, rekonfigurierbare optische Add / Drop-Multiplexer (ROADMs) und bandbreitenvariable, abstimmbare Transponder. Weiterhin sind Online-Ressourcenzuweisungsmechanismen erforderlich, um für jede eintreffende Verbindungsanforderung abhängig vom aktuellen Netzzustand entscheiden zu können, ob diese akzeptiert werden kann und welche Netzressourcen hierfür reserviert werden. Dies bedeutet, dass die Ressourcenzuteilung als Online-Optimierungsproblem behandelt werden muss. Die Entscheidungen sollen so getroffen werden, dass auf lange Sicht ein vorgegebenes Optimierungsziel erreicht wird. Die Ressourcenzuweisung bei dynamischen optischen Netzen lässt sich in die Teilfunktionen Routing- und Spektrumszuteilung (RSA), Verbindungsannahmekontrolle (CAC) und Dienstgütesteuerung (GoS Control) untergliedern. In dieser Dissertation wird das Problem der Online-Ressourcenzuteilung in dynamischen optischen Netzen behandelt. Es wird die Theorie der Markov-Entscheidungsprozesse (MDP) angewendet, um die Ressourcenzuweisung als Online-Optimierungsproblem zu formulieren. Die MDP-basierte Formulierung hat zwei Vorteile. Zum einen lassen sich verschiedene Optimierungszielfunktionen realisieren (z.B. die Minimierung der Blockierungswahrscheinlichkeiten oder die Maximierung der wirtschaftlichen Erlöse). Zum anderen lässt sich die Dienstgüte von Gruppen von Verbindungen mit spezifischen Verkehrsparametern gezielt beeinflussen (und damit eine gewisse GoS-Steuerung realisieren). Um das Optimierungsproblem zu lösen, wird in der Dissertation ein schnelles, adaptives und zustandsabhängiges Verfahren vorgestellt, dass im realen Netzbetrieb rekursiv ausgeführt wird und die Teilfunktionen RSA und CAC umfasst. Damit ist das Netz in der Lage, für jede eintreffende Verbindungsanforderung eine optimale Ressourcenzuweisung zu bestimmen. Weiterhin wird in der Dissertation die Implementierung des Verfahrens unter Verwendung eines 3-Way-Handshake-Protokolls für den Verbindungsaufbau betrachtet und ein analytisches Modell vorgestellt, um die Verbindungsaufbauzeit abzuschätzen. Die Arbeit wird abgerundet durch eine Bewertung der Investitionskosten (CAPEX) von dynamischen optischen Netzen. Es werden die wichtigsten Kostenfaktoren und die Beziehung zwischen den Kosten und der Performanz des Netzes analysiert. Die Leistungsfähigkeit aller in der Arbeit vorgeschlagenen Verfahren sowie die Genauigkeit des analytischen Modells zur Bestimmung der Verbindungsaufbauzeit wird durch umfangreiche Simulationen nachgewiesen. / Conventional optical transport networks have leveraged the provisioning of high-speed connectivity in the form of long-term installed, constant bit-rate connections. The setup times of such connections are in the order of weeks, given that in most cases manual installation is required. Once installed, connections remain active for months or years. The advent of grid computing and cloud-based services brings new connectivity requirements which cannot be met by the present-day optical transport network. This has raised awareness on the need for a changeover to dynamic optical networks that enable the provisioning of bandwidth on demand (BoD) in the optical domain. These networks will have to serve connections with different bit-rate requirements, with random interarrival times and durations, and with stringent setup latencies. Ongoing research has shown that grid computing and cloud-based services may in some cases request connections with holding times ranging from seconds to hours, and with setup latencies that must be in the order of milliseconds. To provide BoD, dynamic optical networks must perform connection setup, maintenance and teardown without manual labour. For that, software-configurable networks are needed that are deployed with enough capacity to automatically establish connections. Recently, network architectures have been proposed for that purpose that embrace flex-grid wavelength division multiplexing, reconfigurable optical add/drop multiplexers, and bandwidth variable and tunable transponders as the main technology drivers. To exploit the benefits of these technologies, online resource allocation methods are necessary to ensure that during network operation the installed capacity is efficiently assigned to connections. As connections may arrive and depart randomly, the traffic matrix is unknown, and hence, each connection request submitted to the network has to be processed independently. This implies that resource allocation must be tackled as an online optimization problem which for each connection request, depending on the network state, decides whether the request is admitted or rejected. If admitted, a further decision is made on which resources are assigned to the connection. The decisions are so calculated that, in the long-run, a desired performance objective is optimized. To achieve its goal, resource allocation implements control functions for routing and spectrum allocation (RSA), connection admission control (CAC), and grade of service (GoS) control. In this dissertation we tackle the problem of online resource allocation in dynamic optical networks. For that, the theory of Markov decision processes (MDP) is applied to formulate resource allocation as an online optimization problem. An MDP-based formulation has two relevant advantages. First, the problem can be solved to optimize an arbitrarily defined performance objective (e.g. minimization of blocking probability or maximization of economic revenue). Secondly, it can provide GoS control for groups of connections with different statistical properties. To solve the optimization problem, a fast, adaptive and state-dependent online algorithm is proposed to calculate a resource allocation policy. The calculation is performed recursively during network operation, and uses algorithms for RSA and CAC. The resulting policy is a course of action that instructs the network how to process each connection request. Furthermore, an implementation of the method is proposed that uses a 3-way handshake protocol for connection setup, and an analytical performance evaluation model is derived to estimate the connection setup latency. Our study is complemented by an evaluation of the capital expenditures of dynamic optical networks. The main cost drivers are identified. The performance of the methods proposed in this thesis, including the accuracy of the analytical evaluation of the connection setup latency, were evaluated by simulations. The contributions from the thesis provide a novel approach that meets the requirements envisioned for resource allocation in dynamic optical networks.

Derived from and inspired by the adaptive immune system of bacteria, CRISPR has gone from basic biology knowledge to a revolutionizing biotechnological tool, applicable in many research areas such as medicine, industry and agriculture. The full mechanism of CRISPR-Cas9 was first published in 2012 and various CRISPR-Cas systems have already passed the first stages of clinical trials as new gene therapies. The immense research has resulted in continuously growing knowledge of CRISPR systems and the technique seems to have the potential to greatly impact all life on our planet. Therefore, this literature study aims to thoroughly describe the CRISPR-Cas system, and further suggest an undergraduate laboratory exercise involving gene editing with the CRISPR-Cas9 tool. In this paper, we describe the fundamental technical background of the CRISPR-Cas system, especially emphasizing the most studied CRISPR-Cas9 system, its development and applications areas, as well as highlighting its current limitations and ethical concerns. The history of genetic engineering and the discovery of the CRISPR system is also described, along with a comparison with other established gene editing techniques.  This study concludes that a deeper knowledge about CRISPR is important and required since the technique is applicable in many research areas. A laboratory exercise will not only inspire but also provide extended theoretical and practical knowledge for undergraduate students.

Wavelength division multiplexing (WDM) is essential for further enhancement of the transmission capacities of optical telecommunication systems. Key devices in WDM networks are multiplexing/demultiplexing components, which enable the combination/separation of several carrier waves with different wavelengths for the purpose of simultaneous transmission through one optical fibre. These components can be realized using Bragg diffraction from volume holographic gratings. Especially reflection holograms provide a pronounced wavelength selectivity which makes them attractive for free-space WDM applications. Holograms can be stored permanently in photorefractive lithium niobate crystals by the method of Thermal Fixing. Heating of the crystal during or after the recording process and subsequent development by homogeneous illumination at room temperature create nonvolatile holograms. The recording and development processes of Thermal Fixing in iron- and copper-doped lithium niobate crystals were investigated. Macroscopic Gaussian-shaped intensity patterns were used to analyse the origin of the fixing mechanism. Spatially resolved absorption measurements were performed to determine the concentration profiles of electron traps (Fe II/III) and protons. Results of computer simulations were compared with experimental results, which showed that protons can be found to work as compensators during hologram recording at temperatures around 180 degree C. Nevertheless thermal fixing without protons was possible, another compensation mechanism stood in. The obtained refractive-index changes were due to the electro-optic effect, other contributions could be neglected. With this detailed knowledge about thermal fixing, a two-channel demultiplexing unit was built by superposition of two thermally fixed reflection holograms in an iron-doped lithium niobate crystal. For this purpose a special two-beam interference setup with precisely adjustable writing angles was arranged in a vacuum chamber to eliminate thermally induced phase disturbances of the holographic recording procedure. Continuous development of the holograms by incoherent light was necessary. In the dark, the enhanced dark conductivity of the crystal used gave rise to a hologram degradation within about one day. Large diffraction efficiencies were attained (intensity losses between 2.3 and 5.2 dB only) uilizing crystals with high-quality polished surfaces. The crosstalk supression of the realized demultiplexer was > 25 dB, which is comparable with the performance of other multiplexing techniques like fibre Bragg gratings or arrayed-waveguide gratings. The low polarization dependence of the demultiplexer can be improved by superposition of two holograms for each channel.

Les peignes de longueurs d'onde, produisant des dizaines de porteuses optiques régulièrement espacées à partir d'une seule source laser, présentent un grand intérêt pour les systèmes de communication à haut débit. Ce travail de thèse porte sur les peignes générés par les diodes laser à blocage de modes basées sur des nanostructures semi-conductrices à basse dimensionnalité. Dans cette étude, les performances en verrouillage de modes de lasers Fabry-Pérot mono-section basés sur différents systèmes de matériaux sont comparées sur la base de la largeur du spectre optique d'émission et de la capacité à produire des impulsions courtes à faible gigue temporelle. En remarquant que les lasers à base de bâtonnets quantiques InAs sur InP présentent de meilleures caractéristiques par rapport aux autres matériaux examinés, leurs propriétés spécifiques en termes de stabilité des peignes de fréquences optiques et de chirp des impulsions sont étudiées plus en détail. Le chirp est d'abord étudié par la technique FROG (frequency-resolved optical gating). Ensuite, la dispersion chromatique du matériau laser est évaluée afin de vérifier si elle peut expliquer les grandes valeurs de chirp mesurées par FROG. Pour cela la technique de réflectométrie optique dans le domaine fréquentiel est utilisée et ses capacités uniques de mesure ont été étudiées et validées. Enfin, ces lasers sont employés avec succès pour les transmissions haut débit à l'aide de la technique de modulation optique OFDM (orthogonal frequency-division multiplexing) en détection directe. Débits de l'ordre du térabit par seconde, ainsi que le faible coût de l’architecture du système, sont très prometteurs pour les data centers / Optical frequency combs, generating tens of equally spaced optical carriers from a single laser source, are very attractive for next-generation wavelength division multiplexing (WDM) communication systems. This PhD thesis presents a study on the optical frequency combs generated by mode-locked laser diodes based on low-dimensional semiconductor nanostructures. In this work, the mode-locking performances of single-section Fabry-Pérot lasers based on different material systems are compared on the basis of the optical spectrum width, the timing jitter and pulse generation capabilities. Then, noticing that InAs quantum dashes grown on InP exhibit on average better characteristics than other examined materials, their unique properties in terms of comb stability and pulse chirp are studied in more detail. Laser chirp, in particular, is first investigated by frequency resolved optical gating (FROG) characterizations. Then, chromatic dispersion of the laser material is assessed in order to verify whether it can account for the large chirp values measured by FROG. For that, a high sensitivity optical frequency-domain reflectometry setup is used and its measurement capabilities are extensively studied and validated. Finally, the combs generated by quantum dash mode-locked lasers are successfully employed for high data rate transmissions using direct-detection optical orthogonal frequency division multiplexing. Terabit per second capacities, as well as the low cost of this system architecture, appear to be particularly promising for future datacom applications

Les centres de données deviennent de plus en plus importants, allant de petites fermes de serveurs distribuées à des grandes fermes dédiées à des tâches spécifiques. La diffusion de services "dans le nuage" conduit à une augmentation incessante de la demande de trafic dans les centres de données. Dans cette thèse, nous étudions l'évolution des réseaux dans les centres de données et proposons des solutions à court et à long terme pour leur intra-connexion physique. Aujourd'hui, la croissance de la demande de trafic met en lumière la nécessité urgente d’interfaces à grande vitesse capables de faire face à la bande passante exigeant de nouvelles applications. Ainsi, à court terme, nous proposons de nouveaux transpondeurs optiques à haut débit, mais à faible coût, permettant la transmission de 200 Gb /s utilisant des schémas de modulation en intensité et à détection directe. Plusieurs types de modulations d’impulsions en amplitude avancées sont explorés, tout en augmentant la vitesse à des débits symboles allant jusqu’à 100 GBd. La génération électrique à haute vitesse est réalisé grâce à un nouveau convertisseur analogique-numérique intégré, capable de doubler les vitesses des entrées et de générer des signaux à plusieurs niveaux d’amplitude. Cependant, le trafic continuera sa croissance. Les centres de données actuels reposent sur plusieurs niveaux de commutateurs électroniques pour construire un réseau d'interconnexion capable de supporter une telle grande quantité de trafic. Dans une telle architecture, la croissance du trafic est directement liée à une augmentation du nombre des composants du réseau, y-compris les commutateurs avec plus de ports, les interfaces et les câbles. Le coût et la consommation d'énergie qui peut être attendus à l'avenir est intenable, ce qui appelle à une réévaluation du réseau. Par conséquent, nous présentons ensuite un nouveau concept fondé sur la commutation de "slots" optiques (Burst Optical Slot Switching, i.e. BOSS) dans lequel les serveurs sont connectés via des nœuds BOSS à travers des anneaux de fibres multiplexé en longueur d'onde et en temps, et organisés dans une topologie en tore. Au cours de cette thèse, nous étudions la mise en œuvre des nœuds BOSS; en particulier, la matrice de commutation et les transpondeurs optiques. L'élément principal au sein de la matrice de commutation est le bloqueur de slots, qui est capable d'effacer n’importe quel paquet (slot) sur n’importe quelle longueur d'onde en quelques nanosecondes seulement. D'une part, nous explorons l'utilisation d'amplificateurs optiques à semi-conducteurs comme portes optiques à utiliser dans le bloqueur des slots, et étudier leur cascade. D'autre part, nous développons un bloqueur de slots intégré monolithiquement capable de gérer jusqu'à seize longueurs d'onde avec la diversité de polarisation. Ensuite, nous présentons plusieurs architectures de transpondeur et nous étudions leur performance. La signalisation des transpondeurs doit répondre à deux exigences principales: le fonctionnement en mode paquet et la résistance au filtrage serré. D'abord, nous utilisons des transpondeurs élastiques qui utilisent des modulations Nyquist N-QAM, et qui adaptent le format de modulation en fonction du nombre de nœuds à traverser. Ensuite, nous proposons l'utilisation du multiplexage par répartition orthogonale de la fréquence en cohérence optique (CO-OFDM). Avec une structure de paquet inhérente et leur grande adaptabilité fréquentielle, nous démontrons que les transpondeurs CO-OFDM offrent une capacité plus élevée et une meilleure portée que leurs homologues Nyquist. Finalement, nous comparons notre solution BOSS avec la topologie Clos replié utilisée aujourd'hui. Nous montrons que notre architecture BOSS nécessite 400 fois moins de transpondeurs et de câbles que les réseaux de commutation électronique d'aujourd'hui, ce qui ouvre la voie à des centres de données hautement évolutifs et durables / Data centers are becoming increasingly important and ubiquitous, ranging from large server farms dedicated to various tasks such as data processing, computing, data storage or the combination thereof, to small distributed server farms. The spread of cloud services is driving a relentless increase of traffic demand in datacenters, which is doubling every 12 to 15 months. Along this thesis we study the evolution of data center networks and present short- and long-term solutions for their physical intra-connection. Today, rapidly-growing traffic in data centers spotlights the urgent need for high-speed low-cost interfaces capable to cope with hungry-bandwidth demanding new applications. Thereby, in the short-term we propose novel high-datarate low-cost optical transceivers enabling up to 200 Gb/s transmission using intensity-modulation and direct-detection schemes. Several advanced pulse amplitude modulation schemes are explored while increasing speeds towards record symbol-rates, as high as 100 GBd. High-speed electrical signaling is enabled by an integrated selector-power digital-to- analog converter, capable of doubling input baud-rates while outputting advance multi-level pulse amplitude modulations. Notwithstanding, data centers’ global traffic will continue increasing incessantly. Current datacenters rely on high-radix all-electronic Ethernet switches to build an interconnecting network capable to pave with such vast amount of traffic. In such architecture, traffic growth directly relates to an increase of networking components, including switches with higher port-count, interfaces and cables. Unsustainable cost and energy consumption that can be expected in the future calls for a network reassessment. Therefore, we subsequently present a novel concept for intra-datacenter networks called burst optical slot switching (BOSS); in which servers are connected via BOSS nodes through wavelength- and time-division multiplexed fiber rings organized in a Torus topology. Along this thesis we investigate on the implementation of BOSS nodes; in particular, the switching fabric and the optical transceivers. The main element within the switching fabric is the slot blocker, which is capable of erasing any packet of any wavelength in a nanosecond time-scale. On the one hand, we explore the use of semiconductor optical amplifiers as means of gating element to be used within the slot blocker and study their cascadability. On the other hand we develop a monolithically integrated slot blocker capable of handling up to sixteen wavelength channels with dual-polarization diversity. Then we present several transceiver architectures and study their performances. Transceivers’ signaling needs to fulfill two main requirements: packet-mode operation, i.e. being capable of recovering few microsecond –long bursts; and resiliency to tight filtering, which occurs when cascading many nodes (e.g. up to 100). First we build packet-mode Nyquist-pulse-shaped N-QAM transceivers, which adapt the modulation format as a function of the number of nodes to traverse. Later we propose the use of coherent-optical orthogonal frequency division multiplexing (CO-OFDM). With inherent packet structure and high spectral tailoring capabilities, we demonstrate that CO-OFDM-based transceivers offer higher capacity and enhanced reach than its Nyquist counterpart. Finally, we compare our BOSS solution to today’s Folded Clos topology, and show that our BOSS architecture requires x400 fewer transponders and cables than today’s electronic switching networks, which paves the way to highly scalable and sustainable datacenters

La majeure partie des communications mondiales est transportée par des systèmes transocéaniques à fibre optique. Il est estimé que d'ici 2020 le trafic de données atteindra 4.3 ZB par an. Afin de faire face à cette demande, différentes technologies sont actuellement étudiées pour augmenter la capacité des systèmes de transmission très longue distance. Avec l'avènement des circuits intégrés à haute vitesse, des formats de modulation avancés et des techniques de traitement de signal numérique (DSP) peuvent être utilisés pour maximiser l'efficacité spectrale de transmission. Par ailleurs, la capacité des systèmes modernes est fortement limitée par les effets non-linéaires de type Kerr dans la fibre. Ainsi, la première partie de ce travail est axée sur l’étude de la performance et des gains réalisables par des techniques DSP à faible complexité pour mitiger les effets non-linéaires monocanal. En outre, l’utilisation des formats de modulation multiniveaux à haute efficacité spectrale au-delà de 16QAM a pris de l'ampleur pour augmenter le débit de transmission des systèmes, notamment avec l’introduction des formats QAM avec mise en forme probabiliste (PCS-QAM), plus performants que les formats QAM classiques. La deuxième partie de ce travail présente donc une comparaison théorique ainsi qu’expérimentale du format PCS-64QAM avec d’autres formats à haute efficacité spectrale pour les distances transatlantiques. La mise en œuvre d’un format PCS-64QAM conçu pour les distances transpacifiques est également abordée. Enfin, la dernière partie de ce travail concrétise les résultats des travaux menés dans les deux sections précédentes en présentant plusieurs records de transmission / Global data traffic is expected to reach up to 4.3 ZB per year by 2020. With the majority of the global communications being transported on submarine point-to-point fiber-optic systems, different cutting-edge technologies have been under research to cope with this unprecedented traffic growth. Continuous advances in high-speed integrated circuits have allowed the use of advanced modulation formats and digital signal processing (DSP) techniques to maximize the transmission spectral efficiency. With mitigation of fiber linear effects efficiently carried out by DSP with relative low-complexity, the capacity of modern fiber optic systems rests limited by fiber nonlinearities. To this extent, in the first part of this work, the performance and achievable benefits of low-complexity DSP techniques aiming to mitigate fiber Kerr nonlinear effects are investigated. Besides nonlinear compensation techniques, the use of multi-level modulation formats beyond 16QAM and high symbol rate channels have gained momentum to increase the system spectral efficiency. One of the major breakthroughs in the recent years, has been the introduction of QAM-based probabilistic constellation shaping (PCS-QAM), which has proven to outperform regular QAM formats. In this sense, in the second part of this work, the practical achievable rate increase brought by PCS-QAM for transoceanic distances is investigated. A theoretical and experimental comparison with other high-capacity formats is performed, and the design of a PCS-QAM for trans-Pacific distances is addressed. Finally, in the last section, several transmission records using the two above techniques are reported