This is a project exploring a possible future of embedded mobile augmented reality services in people's daily routine. The project was conduct- ed at Umeå Institute of Design as a MFA Thesis in Interaction Design. The constant development of technologies along- side with society’s increased usage of the mobile phone makes this medium more and more inter- esting amongst all age groups. The existing solu- tions focus on ways of communicating through short time interactions as well as on gameplays with a focus on storytelling. So far, these existing solutions are rarely implementing a service aspect for people's daily routine. The mobile augmented reality technology has the power to serve a variety of purposes, which are for now, not discovered. This lack of exploration creates challenges for the market and the user which leads to discourage in that medium. To understand the needs of the people and the language of the technology, I immersed myself into the augmentation of realities and conducted a thorough research with conversations with the target group and experts in the field, opportunity evaluations, and concepts testing. The insights gathered during the research brought the conclu- sion that the medium has the power to transfer knowledge by having the user experiencing rath- er than observing. This increases the chances of understanding and participating with information. This is why the project’s goal is to form a mobile AR service example, where the user feels motivat- ed to engage with their surroundings in their daily routine. The final outcome of the project consists of a plat- form which allows the user to explore the history of their current location. The platform is clustered in two areas. On the one hand a content library gathers information about explored locations. This information is displayed through a list and detail view of written information as well as through an immersive gallery. This gives the user the oppor- tunity to easily explore and share their discoveries with their communities. On the other hand an interactive map as well as a lens filter enables the user during their exploration to discover the infor- mation. Based on a data preview visualisation the user is able to create their own contextual digital gallery. This experience motivates the user to easily start discovering their location as well as building up routines based on that kind of interaction. This new service showcases possibilities to design for mobile AR as well as strengthen the relation be- tween the users and their environment.

<p>The aim of this thesis project is to create a user interface for a web based film production project management portal. This implies creating a site map and a functionality specification based on the needs of the people working in the film production industry. The project was made on account of The Chimney Pot, a post production company in Stockholm. For the scope of this project, the research was concentrated on the part of film production that concerns The Chimney Pot, i.e. the procedures that take place after a film has been recorded. The research also focused on people working in the area of Stockholm, even if their clients and customers in other areas of Sweden and abroad were indirectly included in order for the project portal to be a usable tool in projects where these people are involved. </p><p>Before any visible results can be seen in a web production project, a range of preparation steps needs to be taken. Planning is essential if the final product shall work properly. Extensive research has to be done into the industry. In order to make the product usable, the intended users, their requirements, work procedures and environment need to be examined. Only when there are substantial results and enough knowledge about the industry, the actual implementation can start. The first step is to make a functionality specification, next a site map should be produced and the technical architecture should be specified. These are the areas that are covered in this project, but there are also recommendations about how the further development should be made. Important aspects in the next phase are to create a budget, to put together a development team and to create a graphic user interface. In the whole process the issues of usability need to be considered, i.e. efficiency, flexibility, learnability and satisfaction. </p><p>The key requirements for the project portal turned out to be speed and effectiveness. The user interface was designed to be intuitive and to be shallow, which means that the user should be able to perform any task with the least amount of mouse clicks possible. Another intention with the produced user interface is for it to be clearly divided into the four main areas that could be extracted from the user requirements. They are planning, project details, communication and file sharing. Directly after logging on to the project portal, the user should get an overview of all these areas. Other important considerations were security, version control and seamlessness. These issues demand a thorough planning of the technical architecture and this thesis provides some useful tips for the further development of the technical specification.</p>

<p>Ett problem med elektroniska patientjournalsystem är att arkitekturen för patientjournalerna inte är gemensam vilket försvårar automatiskt utbyte av patientdata. En arkitektur har skapats inom ett projekt som heter openEHR. Förhoppningen är att denna arkitektur ska klara av automatiskt utbyte av patientdata mellan elektroniska patientjournalsystem.</p><p>I openEHRs arkitektur används något som kallas arketyper. Arketyper är återanvändbara modeller för att begränsa, strukturera och förklara vad som lagras i elektroniska patientjournaler som bygger på denna arkitektur. Istället för att områdesspecifik information, som vad ett blodtryck är, skapas i systemet flyttas den och annan liknande kunskap ut från systemarkitekturen och in i arketyperna. Arketyper kan skapas och redan existerande arketyper förändras utan att några ändringar i systemarkitekturen behöver göras.</p><p>Huvudproblemet i examensarbetet har varit att hitta en metod för att generera ett grafiskt gränssnitt utifrån en elektronisk patientjournal som är konstruerad med hjälp av arketyper. För att lösa detta behövdes det först skapas arketyper och ett system för att generera journaler utifrån dessa. Därefter har en webbportal utvecklats där det går att logga in och läsa de skapade patientjournalerna. Metoden för att generera gränssnittet i webbsidorna använder sig av en rekursiv funktion för att samla in information ur patientjournalerna. Funktionen lagrar den insamlade information i en objektstruktur som följer designmönstret Composite. Utifrån denna struktur går det sedan att generera ett grafiskt gränssnitt.</p><p>Webbportalen kan användas för att demonstrera hur ett system kan se ut där både patienter och behörig personal får tillgång till och möjlighet att läsa inlagda journaler som bygger på openEHRs arkitektur.</p> / <p>One problem with electronic health record systems is that the health records are not built on a common architecture. This makes automatic exchange of patient data difficult. openEHR is a project that has developed an architecture that tries to solve this problem.</p><p>The openEHR architecture uses something called archetypes. Archetypes are reusable models that limit, structure and explain what will be stored in the electronic health record that is built on this architecture.</p><p>The main goal of this master thesis has been to find a method to generate a graphical user interface from an electronic health record created using archetypes. To solve this problem first archetypes and a system that generates health records from these had to be created. Then a Web portal has been developed that displays the generated health records.</p><p>The Web portal can be used to demonstrate the graphical user interface of a system where both patients and authorized personnel can read patient records that are bases on the openEHR architecture.</p>

The site of confluence of the artery and the portal vein in the liver still appears to be controversial. Anatomical studies suggested a presinusoidal or an intrasinusoidal confluence in the first, second or even final third of the sinusoids. The objective of this investigation was to study the problem with functional biochemical techniques. Rat livers were perfused through the hepatic artery and simultaneously either in the orthograde direction from the portal vein to the hepatic vein or in the retrograde direction from the hepatic vein to the portal vein. Arterial how was linearly dependent on arterial pressure between 70 cm H2O and 120 cm H2O at a constant portal or hepatovenous pressure of 18 cm H2O. An arterial pressure of 100 cm H2O was required for the maintenance of a homogeneous orthograde perfusion of the whole parenchyma and of a physiologic ratio of arterial to portal how of about 1:3. Glucagon was infused either through the artery or the portal vein and hepatic vein, respectively, to a submaximally effective ''calculated'' sinusoidal concentration after mixing of 0.1 nmol/L. During orthograde perfusions, arterial and portal glucagon caused the same increases in glucose output. Yet during retrograde perfusions, hepatovenous glucagon elicited metabolic alterations equal to those in orthograde perfusions, whereas arterial glucagon effected changes strongly reduced to between 10% and 50%. Arterially infused trypan blue was distributed homogeneously in the parenchyma during orthograde perfusions, whereas it reached clearly smaller areas of parenchyma during retrograde perfusions. Finally, arterially applied acridine orange was taken up by all periportal hepatocytes in the proximal half of the acinus during orthograde perfusions but only by a much smaller portion of periportal cells in the proximal third of the acinus during retrograde perfusions. These findings suggest that in rat liver, the hepatic artery and the portal vein mix before and within the first third of the sinusoids, rather than in the middle or even last third.

Light-frame shearwall assemblies have been successfully used to resist gravity and lateral loads, such as earthquake and wind, for many decades. However, there is a need for maintaining the structural integrity of such buildings even when large openings in walls are introduced. Wood portal frame systems have been identified as a potential alternative to meet some aspects of this construction demand. The overarching goal of the research is to develop wood portal frame bracing systems, which can be used as an alternative or in combination with light-frame wood shearwalls. This is done through investigating the behavior of wood portal frames using the MIDPLY shearwall framing technique. A total of 21 MIDPLY corner joint tests were conducted with varying bracing details. Also, a finite element model was developed and compared with test results from the current study as well as studies by others. It was concluded from the corner joint tests that the maximum moment resistance increased with the addition of metal straps or exterior sheathings. The test results also showed a significant increase in the moment capacity and rotational stiffness by replacing the Spruce-Pine Fir (SPF), header with the Laminated Veneer Lumber (LVL) header. The addition of the FRP to the standard wall configuration also resulted in a significant increase in the moment capacity. However, no significant effect was observed on the stiffness properties of the corner joint. The FE model was capable of predicting the behavior of the corner joints and the full-scale portal frames with realistic end-conditions. The model closely predicted the ultimate lateral capacity for all the configurations but more uncertainty was found in predicting the initial stiffness.The FE model used to estimate the behavior of the full-scale portal frames constructed using the MIDPLY framing techniques showed a significant increase in the lateral load carrying capacity when compared with the traditional portal frame. It was also predicted using the full-scale FE model that the lateral load carrying capacity of the MIDPLY portal frame would increase with the addition of the metal straps on exterior faces. A parametric study showed that using a Laminated Strand Lumber (LSL) header increased the lateral load carrying capacity and the initial stiffness of the frames relative to the SPF header. The study also showed that there was an increase in the capacity if high strength metal straps were used. Doubling of the nail spacing at header and braced wall segment had a considerable effect on the lateral capacity of portal frame. Also, the initial stiffness was reduced for all the configurations with the doubling of the nail spacing at the header and braced wall segment in comparison with the reference frame.

University of Macau / Faculty of Science and Technology / Department of Computer and Information Science

Las organizaciones modernas se encuentran condicionadas por una doble coyuntura que determina su desarrollo. Por un lado, la creciente importancia del factor humano y, por otro, la progresiva expansión de las Tecnologías de la Información y la Comunicación (TIC) están cambiando la estructura y la cultura de todo tipo de empresas e instituciones, dando lugar a la que se ha venido en denominar como "organización red". A este nuevo tipo de organizaciones es lógico que le corresponda un nuevo tipo de comunicación interna. De hecho, la hipótesis de la que parte esta investigación doctoral es que las TIC suponen un cambio sustancial en la forma de entender la comunicación interna en las organizaciones, tanto por su influencia directa sobre la gestión, sobre la cultura corporativa y sobre la comunicación externa de las mismas, como por el hecho de constituir en sí mismas nuevos canales de relación con y entre los públicos internos. A partir de ahí, la tesis plantea un modelo de gestión de la nueva comunicación interna que toma como eje central los portales corporativos, que se plantean como los grandes repositorios de los que se definen como los tres grandes contenidos que ha de reportar la comunicación interna: información operativa, información ad intra e información ad extra. Este modelo de gestión de la nueva comunicación interna se confronta con la experiencia en este ámbito de las siete universidades de la Comunidad Valenciana a través de un análisis en profundidad de la prácitca cotidiana en cada uno de los centros estudiados. La elección de este ámbito de estudio se justifica por la avanzada situación de las universidades en la incorporación de las TIC, así como por la alta cultura tecnológica de sus miembros, lo que las convierte en un laboratorio privilegiado para la investigación en su interior de esta nueva comunicación interna. A partir de una investigación cualitativa y cuantitativa de la práctica de la comunicación interna en las siete universidades valencianas, se plantea una radiografía del sector en el momento de la investigación y se revisan el modelo de gestión propuesto. Finalmente, las conclusiones de la investigación teórica y empírica se han sometido a un proceso de confrontación con un panel de expertos en comunicación universitaria, lo que ha permitido llegar a un modelo validado que plantea cómo integrar los nuevos medios en la gestión de la comunicación interna a partir, principalmente, de la adaptación de los principios del corporate a la estructura de los sistemas de información. Asimismo, se plantea una de las claves fundamentales de este modelo la capacidad de franquiciar la gestión del contenido interno a través de la tecnología XML y la incorporación de contenidos externos mediante su sindicación. Por último, todo el modelo se apoya en la segmentación de públicos y en la personalización de los contenidos, una opción esta última que marcará las tendencias de futuro de la comunicación interna.

Ett problem med elektroniska patientjournalsystem är att arkitekturen för patientjournalerna inte är gemensam vilket försvårar automatiskt utbyte av patientdata. En arkitektur har skapats inom ett projekt som heter openEHR. Förhoppningen är att denna arkitektur ska klara av automatiskt utbyte av patientdata mellan elektroniska patientjournalsystem. I openEHRs arkitektur används något som kallas arketyper. Arketyper är återanvändbara modeller för att begränsa, strukturera och förklara vad som lagras i elektroniska patientjournaler som bygger på denna arkitektur. Istället för att områdesspecifik information, som vad ett blodtryck är, skapas i systemet flyttas den och annan liknande kunskap ut från systemarkitekturen och in i arketyperna. Arketyper kan skapas och redan existerande arketyper förändras utan att några ändringar i systemarkitekturen behöver göras. Huvudproblemet i examensarbetet har varit att hitta en metod för att generera ett grafiskt gränssnitt utifrån en elektronisk patientjournal som är konstruerad med hjälp av arketyper. För att lösa detta behövdes det först skapas arketyper och ett system för att generera journaler utifrån dessa. Därefter har en webbportal utvecklats där det går att logga in och läsa de skapade patientjournalerna. Metoden för att generera gränssnittet i webbsidorna använder sig av en rekursiv funktion för att samla in information ur patientjournalerna. Funktionen lagrar den insamlade information i en objektstruktur som följer designmönstret Composite. Utifrån denna struktur går det sedan att generera ett grafiskt gränssnitt. Webbportalen kan användas för att demonstrera hur ett system kan se ut där både patienter och behörig personal får tillgång till och möjlighet att läsa inlagda journaler som bygger på openEHRs arkitektur. / One problem with electronic health record systems is that the health records are not built on a common architecture. This makes automatic exchange of patient data difficult. openEHR is a project that has developed an architecture that tries to solve this problem. The openEHR architecture uses something called archetypes. Archetypes are reusable models that limit, structure and explain what will be stored in the electronic health record that is built on this architecture. The main goal of this master thesis has been to find a method to generate a graphical user interface from an electronic health record created using archetypes. To solve this problem first archetypes and a system that generates health records from these had to be created. Then a Web portal has been developed that displays the generated health records. The Web portal can be used to demonstrate the graphical user interface of a system where both patients and authorized personnel can read patient records that are bases on the openEHR architecture.

Because the e-government policy carries out, government departments in Taiwan built many Websites to show some government decree information in these years. Besides, for catching on public opinion they open some Online Public Discussion Forum on Website to create communication channel between people and government. In other words, we can say this function as ¡§Electronic Democracy¡¨ or ¡§Digital Democracy¡¨. In addition to this function, I think about whether Online Public Discussion Forum can provide an activity platform for Knowledge Management to promote further some government¡¦s administration policy. This research used ¡§Online Public Discussion Forum of Government Procurement Law¡¨ as case study in view of Knowledge Management process activity about Government Procurement Law¡¦s administration. This research used three perspectives--- administration¡¦s process perspective, Virtual Community¡¦s management perspective, and on-line user¡¦s interaction perspective --- to observe this case study. Moreover, summarize these observation and reference feasibility of Government Procurement Law¡¦s administration in the future to recommend briefly the follow points: 1.Based on quick mobility about Government Procurement¡¦s staff in everywhere government entity, difficultly for expending organization of human resource in order to the government reform, and tendency of Government Procurement system development, I recommend to give priority for codification strategy and secondary for personalization strategy. Moreover, combine process-centred strategy with product-centred strategy to become internet strategy. 2.Integrate transaction-based strategy, systematic strategy and socialized strategy into Knowledge Management strategy for Government Procurement Law¡¦s administration¡G (1) Transaction-based strategy: Recommend to build ¡§Knowledge mapping¡¨. Currently responsible entity (Public Construction Commission, Executive Yuan) promoted ¡§seed teachers¡¨ and add undertaker¡¦s name in the official documents published on Website. Moreover, I suggest classifying and appraising the books, training, seminars and so on about Government Procurement¡¦s topic with the Knowledge Management concept. The way will make users to search information and knowledge conveniently. (2) Systematic strategy: Recommend to attach ¡§Knowledge layer¡¨ to ¡§Data layer¡¨ and ¡§Information layer¡¨ on Website. I suggest that responsible entity reorganize these data and information to present easy-touching knowledge for users. Moreover, cultivate user¡¦s problem-solving and innovation ability by themselves with strengthening invest in information technology and promoting users to use these knowledge, information, data. (3) Socialized strategy: Recommend to build ¡§Knowledge Community¡¨. Currently responsible entity built ¡§Virtual Community¡¨ to create a platform for everywhere users. Moreover, I suggest encouraging users to create and open a variety of ¡§Practice Community¡¨ in their organizations and endowed with Knowledge Worker function. The way can convert Tacit Knowledge among people into Explicit Knowledge and make up ¡§Best Practice¡¨. This reorganized knowledge can transfer and share conveniently. 3.In managing Virtual Community aspect, except for responsible entity playing the role of manager and maintainer, I recommend further to play the role of trigger for Knowledge Management. Moreover, combining performance with Knowledge Worker¡¦s function will encourage employees to do positively Knowledge actively in addition to official-documents everyday. 4.If Management of Procurement Professionals can build classify system in the future, I recommend to implement the appraisal system to understand staff¡¦s knowledge internalization and validate professional ability. Moreover, according to requirement for different users, responsible entity should open different sorts and levels¡¦ ¡§Knowledge Community¡¨. This way can add the depth and breadth of discussion on On-line Forum.

In the event of a radioactive dispersal device (RDD), the assessment of the internal contamination level of victims is necessary to determine if immediate medical follow-up is necessary. Thermo Scientific's TPM-903B Portal Monitor was investigated to determine if it is a suitable first cut screening tool for internal contamination assessment of victims. A portal monitor was chosen for this study because they are readily accessible, transportable, easy to assemble, and provide whole body count rates due to the detector size. The TPM-903B was modeled in Monte Carlo N-Particles Transport Code Version 5 (MCNP). This computational model was validated against the portal monitor's response to a series of measurements made with four point sources in a polymethyl methacrylate (PMMA) slab box. Using the validated MCNP5 model and models of the MIRD male and female anthropomorphic phantoms, the response of the portal monitor was simulated for the inhalation and ingestion radionuclides from an RDD. Six representative phantoms were considered: Reference Male, Reference Female, Adipose Male, Adipose Female, Post-Menopausal Adipose Female, and 10-Year-Old Child. The biokinetics via Dose and Risk Calculation Software (DCAL) was implemented using both the inhalation and ingestion pathways to determine the radionuclide concentrations in the organs of the body which were then used to determine the count rate of the portal monitor as a function of time. Dose coefficients were employed to determine the count rate of the detector associated with specific dose limits. These count rates were then compiled into procedure sheets to be used by first responders during the triaging of victims following an RDD.