The euthropthication of the Baltic Sea is a threat that is beginning to be taken seriously by the governments concerned. In Sweden, regulations concerning the allowed nitrogen (N) concentration in the effluent water from wastewater treatment plants are being tightened up. The Rimbo wastewater treatment plant has been imposed to reduce the annual mean concentration of total N in the effluent water to levels below 15 mg l-1. A more and more common way to reduce the nitrogen level in wastewater is to let the water pass through a wetland. This study investigates the possibility to build this kind of wetland at the outlet of the Rimbo wastewater treatment plant. A prestudy of the topography, soil characteristics and groundwater flow indicates that the land area in question is well suited for the construction of a wetland. A proposal for the design has been made by using a physically based computer model developed in the PRIMROSE project (PRocess based Integrated Management of constructed and Riverine wetlands for Optimal control of wastewater at catchment ScalE), which is financed by the EU. Analysis of the residence time distribution (RTD) is a tool for understanding wetland design characteristics and can be used for wetland engineering such as optimizing design for best possibleefficiency in nitrogen removal. In order to characterize the performance of a wetland, it is useful to translate the RTD to a key figure representing the treatment efficiency. In this work, two types of such key figures have been used. Key figure 1 gives the hydraulic efficiency and Key figure 2 gives an estimation of the nitrogen retention by an integration of hydraulic characteristics and the chemical transformation of nitrogen. The results of this study show that constructing a wetland in Rimbo probably would be an efficient way to reduce the nitrogen level at the effluent of the wastewater plant below the limits of the regulations. In addition, a wetland would form a nice place of recreation for the people in Rimbo and also make a good habitat for birds. / Övergödningen i Östersjön är ett problem som uppmärksammas alltmer. Ett led i att minska kvävebelastningen på Östersjön är ökade krav på rening i de svenska kommunala reningsverken. Rimbo avloppsreningsanläggning har blivit ålagd ett riktvärde för totalkväve på 15 mg l-1 i utgående vatten, vilket motsvarar en reningsgrad som inte uppnås idag. Ett alltmer vanligt sätt att minska föroreningshalterna är att anlägga våtmarker i anslutning till reningsverken för att efterpolera spillvattnet. Det här arbetet är en del av en förstudie till en sådan våtmark i Rimbo. En förundersökning av topografi, jordart och grundvattenflöden indikerar att det område som föreslagits i anslutning till reningsverket i Rimbo lämpar sig väl för ett våtmarksbygge. Förslag till utformning har tagits fram med hjälp av en fysikaliskt baserad modell över vattenströmning, utvecklad inom det EU-finansierade projektet PRIMROSE (PRocess based Integrated Management of constructed and Riverine wetlands for Optimal control of wastewater at catchment ScalE). Analys av vattnets uppehållstidsfördelning ger förståelse för våtmarkens egenskaper och kan därför användas vid t ex optimering av våtmarksdesign med avseende på kväverening. För att på ett enkelt sätt kunna jämföra olika våtmarkers effektivitet är det praktiskt att översätta uppehållstidsfördelningen till ett nyckeltal för reningseffekten. I det här arbetet har två olika sådana nyckeltal beräknats. Det första ger den hydrauliska effektiviteten och det andra bygger på en metod där våtmarkens interna hydraulik integreras med den kemiska omvandlingen av kväve. Nyckeltal 1 ger ett mått på hur stor del av volymen i våtmarken som används för kväverening, medan Nyckeltal 2 ger ett mått på den procentuella kväveavskiljningen. Den här förstudien visar att en våtmark sannolikt skulle vara ett utmärkt sätt att klara riktvärdet för kvävehalten vid reningsverket i Rimbo. Därutöver skulle en våtmark kunna utgöra ett positivt inslag i landskapet och öka den biologiska mångfalden, inte minst vad gäller fågelliv.

The thesis deals with the numerical modeling of nonreactive and nonlinearly sorbing solutes in groundwater and analysis of the effect of heterogeneity resulting from spatial variation of physical and chemical parameters on the transport of solutes. For this purpose, a hy­brid flux corrected transport (FCT) and central difference method based on operator-split approach is developed for advection-dispersion solute transport equation. The advective transport is solved using the FCT technique, while the dispersive transport is solved using a conventional, fully implicit, finite difference scheme. Three FCT methods are developed and extension to multidimensional cases are discussed. The FCT models developed are anlaysed using test problems possessing analyt­ical solutions for one and two dimensional cases, while analysing advection and dispersion dominated transport situations. Different initial and boundary conditions, which mimic the laboratory and field situations are analysed in order to study numerical dispersion, peak cliping and grid orientation. The developed models are tested to study their relative merits and weaknesses for various grid Peclet and Courant numbers. It is observed from the one dimensional results that all the FCT models perform well for continuous solute sources under varying degrees of Courant number restriction. For sharp solute pulses FCT1 and FCT3 methods fail to simulate the fronts for advection dominated situations even for mod­erate Courant numbers. All the FCT models can be extended to multidimensions using a dimensional-split approach while FCT3 can be made fully multidimensional. It is observed that a dimensional-split approach allows use of higher Courant numbers while tracking the fronts accurately for the cases studied. The capability of the FCT2 model is demonstrated in handling situations where the flow is not aligned along the grid direction. It is observed that FCT2 method is devoid of grid orientation error, which is a common problem for many numerical methods based on Cartesian co-ordinate system. The hybrid FCT2 numerical model which is observed to perform better among the three FCT models is extended to model transport of sorbing solutes. The present study analyses the case of nonlinear sorption with a view to extend the model for any reactive transport situation wherein the chemical reactions are nonlinear in nature. A two step approach is adopted in the present study for coupling the partial differential equation gov­erning the transport and the nonlinear algebraic equation governing the equilibrium sorp­tion. The suitability of explicit-implicit (EI - form) formulation for obtaining accurate solution coupling the transport equation with the nonlinear algebraic equation solved using a Newton-Raphson method is demonstrated. The performance of the numerical model is tested for a range of Peclet numbers for modelling self-sharpening and self-smearing con­centration profiles resulting from nonlinear sorption. It is observed that FCT2 model based on this formulation simulates the fronts quite accurately for both advection and dispersion dominated situations. The delay in the solute mobility and additional dispersion are anal­ysed varying the statistical parameters characterising the heterogeneity namely, correlation scale and variance during the transport of solutes and comparisons are drawn with invariant, cases. The impact of dispersion during the heterogeneous transport is discussed.

Analysis of flow and solute transport problem in porous media are affected by uncertainty inbuilt both in boundary conditions and spatial variability in system parameters. The experimental investigation reveals that the parameters may vary in various scales by several orders. These affect the solute plume characteristics in field-scale problem and cause uncertainty in the prediction of concentration. The main focus of the present thesis is to analyze the probabilistic behavior of solute concentration in three dimensional(3-D) heterogeneous porous media. The framework for the probabilistic analysis has been developed using perturbation approach for both spectral based analytical and finite element based numerical method. The results of the probabilistic analysis are presented either in terms of solute plume characteristics or prediction uncertainty of the concentration. After providing a brief introduction on the role of stochastic analysis in subsurface hydrology in chapter 1, a detailed review of the literature is presented to establish the existing state-of-art in the research on the probabilistic analysis of flow and transport in simple and complex heterogeneous porous media in chapter 2. The literature review is mainly focused on the methods of solution of the stochastic differential equation. Perturbation based spectral method is often used for probabilistic analysis of flow and solute transport problem. Using this analytical method a nonlocal equation is solved to derive the expression of the spatial plume moments. The spatial plume moments represent the solute movement, spreading in an average sense. In chapter 3 of the present thesis, local dispersivity if also assumed to be random space function along with hydraulic conductivity. For various correlation coefficients of the random parameters, the results in terms of the field scale effective dispersivity are presented to demonstrate the effect of local dispersivity variation in space. The randomness of local dispersivity is found to reduce the effective fields scale dispersivity. The transverse effective macrodispersivity is affected more than the longitudinal effective macrodispersivity due to random spatial variation of local dispersivity. The reduction in effective field scale longitudinal dispersivity is more for positive correlation coefficient. The applicability of the analytical method, which is discussed in earlier chapter, is limited to the simple boundary conditions. The solution by spectral method in terms of statistical moments of concentration as a function of space and time, require higher dimensional integration. Perturbation based stochastic finite element method(SFEM) is an alternative method for performing probabilistic analysis of concentration. The use of this numerical method for performing probabilistic analysis of concentration. The use of this numerical method is non common in the literature of stochastic subsurface hydrology. The perturbation based SFEM which uses FEM for spatial discretization of the steady state flow and Laplace transform for the solute transport equation, is developed in chapter 4. The SFEM is formulated using Taylor series of the dependent variable upto second-order term. This results in second-order accurate mean and first-order accurate standard deviation of concentration. In this study the governing medium properties viz. hydraulic Conductivity, dispersivity, molecular diffusion, porosity, sorption coefficient and decay coefficient are considered to vary randomly in space. The accuracy of results and computational efficiency of the SFEM are compared with Monte Carle Simulation method(MCSM) for both I-D and 3-D problems. The comparison of results obtained hby SFEM and MCSM indicates that SFEM is capable in providing reasonably accurate mean and standard deviation of concentration. The Laplace transform based SFEM is simpler and advantageous since it does not require any stability criteria for choosing the time step. However it is not applicable for nonlinear transport problems as well as unsteady flow conditions. In this situation, finite difference method is adopted for the time discretization. The first part of the Chapter 5, deals with the formulation of time domain SFEM for the linear solute transport problem. Later the SFEM is extended for a problem which involve uncertainty of both system parameters and boundary/source conditions. For the flow problem, the randomness in the boundary condition is attributed by the random spatial variation of recharge at the top of the domain. The random recharge is modeled using mean, standard deviation and 2-D spatial correlation function. It is observed that even for the deterministic recharge case, the behavior of prediction uncertainty of concentration in the space is affected significantly due to the variation of flow field. When the effect of randomness of recharge condition is included, the standard deviation of concentration increases further. For solute transport, the concentration input at the source is modeled as a time varying random process. Two types of random source at the source is modeled as a time varying random process. Two types of random source condition are considered, firstly the amount of solute mass released at uniform time interval is random and secondly the source is treated as a Poission process. For the case of multiple random mass releases, the stochastic response function due to stochastic system is obtained by using SFEM. Comparing the results for the two type of random sources, it sis found that the prediction uncertainty is more when it is modeled as a Poisson process. The probabilistic analysis of nonlinear solute transport problem using MCSM is often requires large computational cost. The formulation of the alternative efficient method, SFEM, for nonlinear solute transport problem is presented in chapter 6. A general Langmuir-Freundlich isotherm is considered to model the equilibrium mass transfer between aqueous and sorbed phase. In the SFEM formulation, which uses the Taylor Series expansion, the zeroth-order derivatives of concentration are obtained by solving nonlinear algebraic equation. The higher order derivatives are obtained by solving linear equation. During transport, the nonlinear sorbing solutes is characterized by sharp solute fronts with a traveling wave behavior. Due to this the prediction uncertainty is significantly higher. The comparison of accuracy and computational efficiency of SFEM with MCSM for I-D and 3-D problems, reveals that the performance of SFEM for nonlinear problem is good and similar to the linear problem. In Chapter 7, the nonlinear SFEM is extended for probabilistic analysis of biodegrading solute, which is modeled by a set of PDEs coupled with nonlinear Monod type source/sink terms. In this study the biodegradation problem involves a single solute by a single class of microorganisms coupled with dynamic microbial growth is attempted using this methods. The temporal behavior of mean and standard deviation of substrate concentration are not monotonic, they show peaks before reaching lower steady state value. A comparison between the SFEM and MCSM for the mean and standard deviation of concentration is made for various stochastic cases of the I-D problem. In most of the cases the results compare reasonably well. The analysis of probabilistic behavior of substrate concentration for different correlation coefficient between the physical parameters(hydraulic conductivity, porosity, dispersivity and diffusion coefficient) and the biological parameters(maximum substrate utilization rate and the coefficient of cell decay) is performed. It is observed that the positive correlation between the two sets of parameters results in a lower mean and significantly higher standard deviation of substrate concentration. In the previous chapters, the stochastic analysis pertaining to the prediction uncertainty of concentration has been presented for simple problem where the system parameters are modeled as statistically homogeneous random. The experimental investigations in a small watershed, point towards a complex in geological substratum. It has been observed through the 2-D electrical resistivity imaging that the interface between the layers of high conductive weathered zone and low conductive clay is very irregular and complex in nature. In chapter 8 a theoretical model based on stochastic approach is developed to stimulate the complex geological structure of the weathered zone, using the 2-D electrical image. The statistical parameters of hydraulic conductivity field are estimated using the data obtained from the Magnetic Resonance Sounding(MRS) method. Due to the large complexity in the distribution of weathered zone, the stochastic analysis of seepage flux has been carried out by using MCSM. A batter characterization of the domain based on sufficient experimental data and suitable model of the random conductivity field may help to use the efficient SFEM. The flow domain is modeled as (i) an unstructured random field consisting of a single material with spatial heterogeneity, and (ii) a structured random field using 2-D electrical imaging which is composed of two layers of different heterogeneous random hydraulic properties. The simulations show that the prediction uncertainty of seepage flux is comparatively less when structured modeling framework is used rather than the unstructured modeling. At the end, in chapter 9 the important conclusions drawn from various chapters are summarized.

Two hydrogeologic models explore reflux dolomitization using two outcrop datasets at different scales to constrain transient boundary conditions and heterogeneous petrophysical properties. A platform-scale petrophysical model of the Permian San Andres Formation was built from outcrop and subsurface data following a reservoir modeling approach that preserves outcrop heterogeneity and incorporates a sequence stratigraphic framework. This model was used as input for hydrogeological simulations of hypersaline fluid flow and solute transport during the accumulation and compaction of the platform. Boundary conditions change over time, as relative sealevel fluctuations drive sedimentation, depositional environment migration, topographic gradients, and location, size and salinity of the brine source. The potential volume and distribution of dolomite formed is inferred by a magnesium mass-balance. The composite result of reflux events at various orders of stratigraphic hierarchy is a complex dolomite pattern that resembles that observed on San Andres outcrops. Dolostone bodies across the platform may be generated by different combinations of favorable conditions, including proximity to the brine source, zones of higher permeability, permeability contrasts, and latent reflux. A meter-scale reactive transport model of the Albian Upper Glen Rose Formation simulates deposition of three high-frequency cycles punctuated by three brine reflux events. The simulator determines flow, solute and reactive transport along the flow paths, revealing the spatial and temporal distribution of calcite dissolution, and precipitation of dolomite and sulfate. The model recreates fully and partially dolomitized cycles within the time and lithological constrains on Glen Rose outcrops. Our results show that the distribution of dolomite within a high-frequency cycle may be the net result of intercycle processes, whereby dolomitizing fluids sourced from younger cycles flow across stratigraphically significant boundaries. We also show that variations in dolomite abundance and the unfulfilled dolomitization potential control the contemporaneous propagation of multiple dolomite fronts and the coalescence of discrete dolomite bodies. Results show that reflux is an effective and efficient mechanism to dolomitize carbonate formations that progresses simultaneously with sediment accumulation. Dolomitization is the cumulative result of many short-lived reflux events, sourced in different locations and times, and amalgamation of successive dolostone bodies. This model contrasts with previous studies that approached dolomitization of a carbonate platform as a discrete reflux event and current interpretations that relate dolomite bodies to their most immediate stratigraphic surfaces. / text

No description available.

Seawater-fresh groundwater natural equilibrium conditions in the aquifers of the Sel&ccedil / uk sub-basin may be disturbed by the discharge occurred during the past 30 years in order to supply water for irrigation and domestic purpose usage. Two dimensional density dependent cross sectional saturated flow and solute transport simulations were carried out to determine whether seawater intrusion has occurred in the Sel&ccedil / uk sub-basin due to the imposed discharge or the determined salt-water in the western section of the aquifers represents natural interface equilibrium conditions. The numerical simulation model was calibrated using field measurements. The results of the simulations suggest that the seawater intrusion has occurred in the study area since the pumping activity increased in the region. Five scenarios were simulated for future predictions: (1) Present recharge and discharge conditions are maintained, (2) Discharge increases at a rate of the municipality need as a result of increasing population, (3) Discharge decreases by 12% from the present value, (4) Discharge decreases by 25% from the present value, and (5) No discharge occurs or recharge amount equals to the present discharge amount condition supplied to the aquifer. These scenario results suggest that seawater intrusion in the Sel&ccedil / uk sub-basin would progress in the following years unless proper management measures are taken into consideration. KEYWORDS: seawater intrusion, density dependent groundwater flow, solute transport, contamination, Sel&ccedil / uk sub-basin.

The effect of in-situ or redistributed stress on solute transport in fractured rocks is one of the major concerns for many subsurface engineering problems. However, it remains poorly understood due to the difficulties in experiments and numerical modeling. The main aim of this thesis is to systematically investigate the influences of stress on solute transport in fractured rocks, at scales of single fractures and fracture networks, respectively. For a single fracture embedded in a porous rock matrix, a closed-form solution was derived for modeling the coupled stress-flow-transport processes without considering damage on the fracture surfaces. Afterwards, a retardation coefficient model was developed to consider the influences of damage of the fracture surfaces during shear processes on the solute sorption. Integrated with particle mechanics models, a numerical procedure was proposed to investigate the effects of gouge generation and microcrack development in the damaged zones of fracture on the solute retardation in single fractures. The results show that fracture aperture changes have a significant influence on the solute concentration distribution and residence time. Under compression, the decreasing matrix porosity can slightly increase the solute concentration. The shear process can increase the solute retardation coefficient by offering more sorption surfaces in the fracture due to gouge generation, microcracking and gouge crushing. To study the stress effects on solute transport in fracture systems, a hybrid approach combing the discrete element method for stress-flow simulations and a particle tracking algorithm for solute transport was developed for two-dimensional irregular discrete fracture network models. Advection, hydrodynamic dispersion and matrix diffusion in single fractures were considered. The particle migration paths were tracked first by following the flowing fluid (advection), and then the hydrodynamic dispersion and matrix diffusion were considered using statistic methods. The numerical results show an important impact of stress on the solute transport, by changing the solute residence time, distribution and travel paths. The equivalent dispersion coefficient is scale dependent in an asymptotic or exponential form without stress applied or under isotropic compression conditions. Matrix diffusion plays a dominant role in solute transport when the hydraulic gradient is small. Outstanding issues and main scientific achievements are also discussed. / QC 20111011

Dans cette thèse, nous avons étudié expérimentalement, numériquement et théoriquement la sédimentation d’un soluté en cellule de Hele-Shaw, modèle analogue de milieu poreux, avec un écoulement zonal horizontal. Une cellule, alimentée par deux grands réservoirs assurant un écoulement zonal uniforme, a été réalisée au laboratoire. La vitesse a été mesurée par PIV. L’injection d’une solution saline dans cet écoulement permet de visualiser la propagation du panache de pollution, et de mesurer le champ de concentration par LIF. Trois configurations typiques ont été observées : panache sans digitation (« stable »), avec une seule digitation (« faiblement instable »), et avec de nombreuses digitations (« fortement instable »). L’influence du contraste de densité, de la vitesse zonale, et du débit d’injection sur la stabilité du panache a été analysée. Ces résultats ont été comparés à des simulations numériques sous COMSOL Multiphysics®. Les champs de concentration simulés sont en accord quantitatif avec les champs expérimentaux. Ces simulations ont de plus permis d’étudier l’influence de l’anisotropie du tenseur de dispersion sur la stabilité du panache. Une étude théorique linéaire, effectuée à partir d’un écoulement de base unidirectionnel et quasi-stationnaire, est venue compléter ces résultats. Elle montre que le panache est toujours convectivement instable pour les valeurs des paramètres considérées, et permet de retrouver et de quantifier les principaux résultats mis en évidence lors des études expérimentale et numérique, comme l’effet stabilisant de la dispersivité longitudinale ou l’effet déstabilisant du contraste de densité / This thesis is an experimental and numerical investigation of solute transport and sedimentation in a Hele-Shaw cell with zonal flow. A vertical cell joining two large tanks has been built to provide a uniform horizontal flow, the velocity of which has been measured by using PIV. The concentration field of a solute injected in this flow has been measured by using LIF. Three typical plume configurations have been observed: without digitations (“stable”), with a single digitation (“weakly unstable”), and with various digitations appearing at the lower interface (“unstable plume”). The influence of density contrast, zonal flow and solute flow rate on the appearance of the various configurations has been investigated. These results have been compared to numerical simulations using the COMSOL Multiphysics® software. The numerical concentration fields are in qualitative agreement with the experimental ones. In addition, these simulations allowed us to investigate the effect of the anisotropy of the dispersion tensor on the occurrence of unstable configurations. A linear stability analysis based on a uniform parallel flow superposed to a quasi-steady horizontal layer of solute has been performed. It shows that the plume is convectively unstable for the parameters considered here, and confirms the various behaviors observed in both the experimental and the numerical analyses, like the stabilizing effect of the longitudinal dispersivity or the destabilizing effect of the solute concentration

Un dispositif en sol nu comprenant trois parcelles (90 m²) et six cases lysimétriques (4 m²) instrumentées a permis d’étudier l’influence d’apports répétés d’une boue de station d’épuration (BOUE) et de la même boue compostée avec des déchets verts (DVB) sur (i) les modifications des propriétés physico-chimiques et hydriques du sol ; (ii) le transport des ions bromures ; (iii) la dynamique de minéralisation du carbone et de l’azote organiques dans le sol. Finalement, le calage des paramètres hydrodynamiques et de décomposition de la matière organique dans le sol, propres à chaque horizon des profils de sols instrumentés, a permis une description satisfaisante de la dynamique hydrique et du transport des ions bromures et nitrates observés expérimentalement. Ces résultats aideront à l’adaptation de scénarios agronomiques sur le long terme pour répondre plus efficacement aux problématiques liées aux nouvelles exigences de recyclage des déchets et de protection de l’environnement. / An instrumented experimental bare soil site including three plots (90 m²) and six lysimeters (4 m²) has enabled to study the influence of repeated sewage sludge (SS) applications, as well as the same sewage sludge composted with green waste (SGW), on (i) the soil physicochemical and hydric properties ; (ii) the transport of bromide ions ; (iii) the organic carbon and nitrogen mineralization dynamics in soil. Finally, fitting the governing hydraulic parameters and the organic matter decomposition parameters in each soil horizon allowed a satisfying description of the experimentally observed water and bromide and nitrate ions transport in soil. These results will help conceive long-term agronomical scenarios aimed at providing more efficient answers to the new requirements of environmental protection and waste recycling policies.

Die Modellierung von komplexen Systemen, wie dem Untergrund, ist ein Hilfsmittel zur Beschreibung der in der Realität ablaufenden Prozesse. Die Durchführung von Experimenten an einem Modell, um qualitative Aussagen über ein reales System zu erhalten, wird als Simulation bezeichnet. Dabei können vielfältige Modelle, wie z.B. physikalische und mathematische, zum Einsatz kommen. Die ungesättigte Bodenzone (vadose Zone) bezeichnet den Bereich zwischen der Landoberfläche und dem Grundwasserspiegel, innerhalb dessen der Wassergehalt geringer als bei Vollsättigung, und der Druck geringer als der Atmosphärendruck ist. Dieser Bodenbereich hat für die Landwirtschaft, Geobiologie, aerobe Abbauprozesse und Grundwasserneubildung eine große Bedeutung. Für die Nachbildung von Strömungs- und Stofftransportprozessen der ungesättigten Bodenzone existieren numerische Simulationsprogramme. Ziel der vorliegenden Arbeit ist eine umfangreiche Validierung des Programms PCSiWaPro® (entwickelt an der TU-Dresden, Institut für Abfallwirtschaft und Altlasten) für unterschiedliche Anwendungsfälle. Ein weiteres Ziel der Arbeit besteht in der Untersuchung der Anwendbarkeit des aktuellen Stands des Simulationsprogramms PCSiWaPro® auf unterschiedliche Praxisfälle bei Kombination der ungesättigten Bodenzone mit technischen Anlagen. Vier Anwendungsfälle mit unterschiedlichen Zielen wurden dafür im Rahmen dieser Arbeit untersucht: die Simulation von dezentraler Abwasserversickerung (Kleinkläranlage - KKA) anhand entsprechender Säulen- und Feldversuche, die Berechnung der Grundwasserneubildung am Beispiel von Lysimetern, der Wasserhaushalt von Erddämmen und die Modellierung von Deponieabdeckungssystemen. Die Anwendungsfälle unterscheiden sich durch den Zweck der Simulation, die Geometrie, die Größe, die festgelegten Anfangs- und Randbedingungen, die Simulationszeit, die Materialien, das Koordinatensystem sowie die Ein- und Ausgabewerte. Die Simulationsergebnisse konnten eindeutig zeigen, dass das Programm PCSiWaPro® für alle im Rahmen der vorliegenden Arbeit untersuchten Fälle, mit unterschiedlichen Strömungsregimen, Stofftransport-Parametern, Randbedingungen, Koordinatensystemen sowie Raum- und Zeitdiskretisierungen anwendbar ist. Die Simulationsergebnisse der Säulenversuche am Beispiel dezentraler Abwasserversickerung zeigten eine sehr gute Übereinstimmung zwischen gemessenen und mittels PCSiWa-Pro® berechneten Werten des Wasser- und Stoffhaushaltes (Druckhöhe, Abfluss und Stoff-konzentration) der untersuchten Bodentypen B3 (schwachschluffiger Sand), B4 (Grobsand) und B5 (mittelschluffiger Sand). Die Wurzel des mittleren quadratischen Fehlers (RMSE) betrug für die Berechnung der Druckhöhe 1,84 cm bei B5, 3,61 cm bei B3 und 1,27 cm bei B4. Die relative Abweichung betrug für die Berechnung der Druckhöhe 2,19 % bei B5, 1,3 % bei B3 und ca. 5,3 % bei B4. Die Durchführung der Sensitivitätsanalyse der für die Modellierung relevanten Parameter zeigte eine sehr hohe Sensitivität der VAN GENUCHTEN-Parameter und der gesättigten hydraulischen Leitfähigkeit des Bodens. Darüber hinaus führten die Parameter nach DIN 4220 und die mithilfe von Pedotransferfunktionen aus Siebanalysen genommenen Parameter zu unterschiedlichen Ergebnissen. Im Rahmen des am Institut für Abfallwirtschaft und Altlasten durchgeführten Projektes EGSIM wurden die Programme SENSIT und ISSOP (in Zusammenarbeit mit DUALIS GmbH IT Solution) entwickelt und zur Parameteridentifikation/-kalibrierung benutzt. Die im Rahmen dieser Arbeit erzielten Ergebnisse konnten nachweisen, unter welchen Bedingungen eine Nachklärung des vollbiologisch gereinigten Abwassers innerhalb der Bodenzone möglich ist, so dass am Ort der Beurteilung (Grundwasseroberfläche) kein unzulässiger Schadstoffeintrag erfolgt. In Bezug auf die KKA-Feldmodelle ist die Anwendung des rotationssymmetrischen Koordinatensystems als Voraussetzung der Realität besser zu entsprechen und nicht als Option zu betrachten. Darüber hinaus wurden anhand der Feldmodelle verschiedene Szenarien mit kontinuierlicher und diskontinuierlicher Versickerung sowie zwei unterschiedlich großen Einleitflächen durchgeführt. Das Programm PCSiWaPro® ist sowohl für ungesättigte als auch für variabel-gesättigte porösen Medien anwendbar. Dies wurde im Rahmen der Simulation des Wasserhaushaltes eines Erddamms nachgewiesen. Die durchschnittliche relative Abweichung zwischen gemessenen und mittels PCSiWaPro® berechneten Wasserständen des entsprechenden Beobachtungspunkts im untersuchten Dammkörper lag bei 0,08 % (entspricht 5,8 cm bei einer Müchtigkeit von ca. 70 m) und das Bestimmtheitsmaß (R2) betrug 0,987. Die Simulation des Wasserhaushaltes unterschiedlicher Deponieabdichtungssystemen mittels PCSiWaPro® zeigte im Allgemeinen ein funktionierendes Ableiten des auf Deponien anfallenden Regenwassers (auch bei Starkregenereignissen). Darüber hinaus haben die durchgeführten Bewuchs-Modelle nachweisen können, dass die Vegetation der Deponieoberflächen den Wassergehalt, durch Pflanzenwurzelentzug bzw. Evapotranspiration, reduzieren können. Die Simulationsergebnisse der durchgeführten Szenarien des Wasserhaushaltes von Lysimetern zur prognostischen Berechnung der Grundwasserneubildung mittels PCSiWaPro® konnten nachweisen, dass das Programm für die Berechnung der Grundwasserneubildungsrate für diesen Zweck anwendbar ist. Die relativen Abweichungen der be-rechneten von den gemessenen Grundwasserneubildungsraten sind auf die verwendeten Materialparameter sowie auf Vernachlässigung der möglicherweise in Lysimetern sich befin-denden Makroporen (duale Porosität) zurückzuführen. / The modelling of complex systems such as the underground is a means to describe the processes occurring in the reality. The conducting of experiments on a model to obtain qualitative evidence about a real system is referred to as a simulation. Thereby, various models (e.g. physical and mathematical models) can be used. The unsaturated zone (vadose zone) is the region between the land surface and the water table, in which the water content is less than full saturation, and the pressure is lower than the atmospheric pressure. The unsaturated zone is very significant for agriculture, geobiology, aerobic degradation processes and groundwater recharge. The processes of water flow and solute transport in the unsaturated zone can be described by means of numerical simulation programs. The aim of the present work is a comprehensive validation of the simulation program PCSiWaPro® (developed at the TU-Dresden, Institute of Waste Management and Contaminated Site Treatment) for different applications. Another aim of this work is to investigate the applicability of the current version of PCSiWaPro® for different cases of a combination between the unsaturated zone and technical facilities. Four application cases with different objectives were investigated within the present work, which are: the simulation of decentralized wastewater infiltration with corresponding column and field experiments, the computation of groundwater recharge by means of lysimeters, the water balance of earth dams and the modelling of landfill covering systems. The application cases differ from each other by the objective of the simulation, the geometry, the size, the specified initial and boundary conditions, the simulation time, the applied materials, the coordinate system, the input and output data. The simulation results clearly showed that PCSiWaPro® is applicable for all investigated cases under consideration of different flow and solute transport regimes, parameters, boundary conditions, spatial and temporal discretization, and coordinate systems. The simulation results of the experimental soil columns for the decentralized treated wastewater infiltration case showed a very good agreement between measured and computed values of water and solute balance (pressure head, flow and solute concentration) of the investigated soil types B3 (slightly silty sand), B4 (coarse sand / gravel) and B5 (medium silty sand). The root of the mean squared error (RMSE) for the computation of the pressure head was 1,84 cm at B5, 3,61 cm at B3 and 1,27 cm at B4. The relative deviation in case of pressure head computation was 2,19 % at B5, 1,3 % at B3 and 5,3 % at B4. The implementation of the sensitivity analysis of the relevant parameters for the modelling showed a very high sensitivity of the VAN GENUCHTEN parameters and the saturated hydraulic conductivity of the soil. Moreover, the parameters according to DIN 4220 led to different results than the estimated ones according to pedotransfer methods based on sieve analysis. Within the project EGSIM, which was carried out at the Institute for waste management and contaminated sites treatment in collaboration with DUALIS GmbH IT Solution, the programs SENSIT and ISSOP were developed and used for parameter identification/ calibration. The results obtained in this Work showed under which conditions is a secondary treatment of full biologically treated wastewater in the soil possible, so that no unallowable pollutants entry in the groundwater occurs. With regard to the field models of this application the implementation of the rotationally symmetric coordinate system should be considered as a condition and not as an option for a better corresponding to the reality. Furthermore, different scenarios of the field models were carried out with continuous and discontinuous infiltration, as well as under different initiation areas. PCSiWaPro® could be applied for both unsaturated and variably-saturated porous media. This could be proven by the simulation of the water balance in an earth dam. The average relative deviation between measured and simulated water levels of the corresponding observation point in the investigated dam embankment was 0,08 % (corresponding to 5,8 cm at 70 m thickness) and the coefficient of determination (R2) was 0,987. In general, the simulation of the water balance using PCSiWaPro® of different landfill covering systems showed a successful draining of the falling rainwater (even under heavy rainfall). In addition, the implemented vegetation models have proven that the vegetation of the landfill surface can reduce the water content in the landfill by evapotranspiration and water uptake by roots. The water balance simulation results of the scenarios for the computation of groundwater recharge by means of lysimeters showed that the program is applicable for this case. The relative deviation of the simulated from the measured groundwater recharge rates occur due to the implemented material parameters as well as to the neglect of macro pores effects (dual porosity).