La complexité anatomique de l'endodonte implique un protocole d'irrigation efficace. L'hypochlorite de sodium doit donc pouvoir pénétrer dans l'ensemble du réseau endodontique afin d'exercer son activité antiseptique et protéolytique. Dans cet objectif, l'utilisation d'un tensioactif mélangé à l'hypochlorite de sodium constitue une approche potentiellement intéressante pour optimiser la pénétration et l'étalement de l'hypochlorite de sodium au sein du système canalaire. Cette thèse sur publications a donc pour objectif d'étudier l'influence de la modification de l'hypochlorite de sodium par adjonction de tensioactifs sur l'énergie interfaciale et la viscosité dynamique de la solution d'irrigation. Le premier chapitre décrit les enjeux, les différentes problématiques liées à l'irrigation ainsi qu'une revue de littérature critique des différentes techniques d'irrigation disponibles. Le second chapitre se focalise sur les propriétés physico-chimiques des solutions d'irrigation et sur des aspects plus spécifiquement liés à l'hydrodynamique et au mouillage des liquides et en particulier les notions d'énergie interfaciale, de concentration micellaire critique, de viscosité dynamique et de régime d'écoulement. Après une synthèse des aspects théoriques et des implications potentielles en endodontie, l'ensemble des matériels et méthodes expérimentales est détaillé dans le troisième chapitre. Le quatrième chapitre décrit l'influence de l'adjonction d'un tensioactif sur le mouillage de la solution d'irrigation sur la base d'une étude préliminaire et d'études complémentaires ayant abouti à une première publication internationale. Le cinquième chapitre décrit l'influence de l'adjonction d'un tensioactif sur l'écoulement de la solution d'irrigation, cette étude ayant débouché sur une seconde publication internationale. Enfin, le sixième chapitre constitue la conclusion de ce travail et les perspectives de recherche sur la thématique. / The complexity of the root canal anatomy requires an efficient irrigation protocol. Sodium hypochlorite must penetrate in the whole of the endodontic system in order to be strongly active in terms of antiseptic and solvant properties. Therefore, the use of surfactants mixed to sodium hypochlorite is a promising approach to enhance the penetration depth and the spreading of endodontic irrigant within the root canal. The purpose of this thesis based on two international publications is to study the influence of surfactant addition to sodium hypochlorite on its surface tension and dynamic viscosity. The first chapter describes the different stakes, issues and irrigation techniques thanks to a critical review of the literature. The second chapter focuses on hydrodynamics and wetting properties especially surface energy, critical micellar concentration, dynamic viscosity and flow regimen. After a description of the theoretical aspects and the potential applications in root canal therapy, all the materials and methods used in this thesis are detailed in the third chapter. The fourth chapter describes the influence of surfactant addition on the wettability of endodontic irrigant on the basis of a preliminary study and several additional studies that led to a first international publication. The fifth chapter describes the influence of surfactant addition on the dynamic viscosity of endodontic irrigant and its flow regimen on the basis of a study which led to a second international publication.The final chapter of this thesis constitues the conclusion of this work and the associated prospects regarding this topic.

Ce travail de thèse décrit l'élaboration de latex hybrides oxyde de fer (OF)/polymère par polymérisation en émulsion sans tensioactif. Des nanoparticules d'OF cationiques ont été tout d'abord synthétisées par co-précipitation de sels de fer dans l'eau. Des latex hybrides magnétiques ont été ensuite obtenus par deux voies de polymérisation. La première consiste en la synthèse de particules de latex de morphologie 'carapace' par polymérisation en émulsion Pickering du styrène et du méthacrylate de méthyle (MMA). Un comonomère auxiliaire (acide (méth)acrylique ou acide 2-acrylamido-2-méthyl-1-propane sulfonique) a été utilisé pour favoriser l'adsorption des OF à la surface des particules de polymère produites. Les analyses par MET indiquent la présence d'OF à la surface des particules de polymère (structure carapace). L'analyse thermogravimétrique a permis de quantifier l'efficacité d'incorporation des OF, i.e. la fraction d'OF initialement introduits effectivement adsorbés à la surface des particules. L'efficacité d'incorporation augmente avec la quantité de comonomère auxiliaire, le pH et la concentration en OF et dépend de la nature du monomère hydrophobe. Dans la deuxième voie, les OF ont été encapsulés par polymérisation radicalaire contrôlée par transfert de chaîne réversible par addition-fragmentation (RAFT) en émulsion aqueuse. La stratégie utilisée repose sur l'utilisation de macroagents RAFT amphiphiles comportant des groupements acide carboxylique connus pour interagir avec la surface des OF. L'interaction entre les macroRAFTs et les OF a été étudiée à travers le tracé de l'isotherme d'adsorption. Des analyses SAXS et DLS indiquent la formation de clusters d'oxyde de fer. Ces derniers ont été ensuite engagés dans la polymérisation en émulsion du styrène ou d'un mélange de MMA et d'ABu (ratio massique : 90/10) pour former une écorce de polymère à leur surface. Les particules carapace et les OF encapsulés affichent un comportement superparamagnétique / This work describes the elaboration of polymer/iron oxide (IO) hybrid latexes through surfactant-free emulsion polymerization. Cationic iron oxide nanoparticles stabilized by nitrate counterions were first synthesized by the co-precipitation of iron salts in water. Magnetic hybrid latexes were next obtained by two polymerization routes carried out in the presence of IO. The first route consists in the synthesis of polymer latexes armored with IO via Pickering emulsion polymerization of methyl methacrylate (MMA) or styrene (St). An auxiliary comonomer (namely methacrylic acid, acrylic acid or 2-acrylamido-2-methy-1- propane sulfonic acid) was used to promote IO particle adhesion to the surface of the generated polymer particles. TEM showed the presence of IO at the surface of the polymer particles and the successful formation of IO-armored polymer particles. TGA was used to quantify the IO incorporation efficiency, which corresponds to the fraction of IO effectively located at the particle surface. The incorporation efficiency increased with increasing the amount of auxiliary comonomer, suspension pH and IO content or with increasing monomer hydrophobicity. In the second route, IO encapsulation was investigated via reversible addition-fragmentation chain transfer (RAFT)-mediated emulsion polymerization. The developed strategy relies on the use of water-soluble amphipathic macromolecular RAFT agents containing carboxylic acid groups, designed to interact with IO surface. The interaction between the macroRAFT agents and IO was investigated by the study of the adsorption isotherms. Both DLS and SAXS measurements indicated the formation of dense IO clusters. These clusters were then engaged in the emulsion polymerization of St or of MMA and nbutyl acrylate (90/10 wt/wt) to form a polymer shell at their surface. Both IO-armored latex particles and polymer-encapsulated clusters display a superparamagnetic behavior

Les milieux réactionnels issus de l’étude de la réactivité de deux types de polyols, le glycérol et le diglycérol par réaction d’estérification directe avec l’acide undécylénique, catalysée par l’acide dodécylbenzène sulfonique (ADBS). Les résultats montrent que les ystèmes polyol/acide undécylénique donnent une émulsion eau dans huile (E/H). L’ajout de l’ADBS et de l’eau formée in-situ aux systèmes polyol/acide undécylénique ont permis de réduire la taille des gouttelettes de 50 μm à moins de 1 μm et d’obtenir un système organisé (micro-réacteur). L’augmentation de la température contribue à favoriser le transfert de matière dans les systèmes émulsionnés et / ou gélifiés et d’obtenir un système monophasique, homogène et structurés. L’étude de la réaction de ces systèmes avec une approche site à site (site OH / site COOH) a montré que lorsque le nombre de sites acides carboxyliques est inférieur à celui des sites hydroxyles, la synthèse est totalement sélective en esters partiels des deux polyols (glycérol et diglycérol). Les rendements sont supérieurs respectivement à 60% en esters partiels de glycérol et à 70% en esters partiels de diglycérol. La modélisation de la cinétique de synthèses et la régression des données cinétiques ont montré que la réaction est réversible d’ordre 2 et athermique. Les énergies d’activation calculées sont de 17 kcal/mol et 16 kcal/mol respectivement pour le monoundécénoate de glycérol (MUG) et le diundécénoate de glycérol (DUG). De plus, la méthodologie de recherche expérimentale a montrée que les variables (concentration en catalyseur ADBS et température) permettent d’obtenir le MUG avec un rendement de plus de 60% et une sélectivité en MUG de 80%. Ensuite, l’étude de la réactivité de la double liaison terminale du MUG en présence de deux agents oxydants pour engendrer des molécules bolaamphiphiles simples a été réalisée par H2O2 / acide formique et acide métachloroperbenzoïque (m-CPBA). Les résultats ont montré le 10,11-dihydroxy-monoundécénoate de glycérol (MUGDiol) est obtenu par oxydation au H2O2 / acide formique et le 10,11-époxy-monoundécénoate de glycérol (MUGE) par réaction d’époxydation avec la m-CPBA. L’ouverture de la fonction époxyde par des molécules aminées permet l’observation de nouvelles molécules bolaamphiphiles : le 10-hydroxy-N-11-((2-hydroxyéthyl)amino)monoundécénoate de glycérol(bola éthanolamineglycérol) et le N,N-11-(diaminobutan)-10-hydroxymonoundecanoate de glycérol (bola diaminobutaneglycérol). L’étude des propriétés physico-chimiques de ces molécules amphiphiles et bolaamphiphiles a permis de monter que toutes ces molécules sont de solvo-surfactants actifs aux interfaces et elles réduisent la tension interfaciale de l’eau jusqu’à la limite de la solubilité dans l’eau. L’adsorption des molécules ne vérifie pas le modèle de Gibbs. Le MUG et le MUDG s’auto-assemblent dans l’eau et donnent des nano-objets (vésicules et agrégats plats) et s’adsorbent sur des surfaces polaires et solides (silice et ciment). Ces deux molécules retiennent 30% et 56% molécules d’eau et le nombre de molécules d’eau fortement liée aux têtes polaires est de 21 et 49 respectivement pour le MUG et le MUDG. Pour es molécules bolaamphiphiles pures (MUGE et bola éthanolamineglycérol), elles retiennent plus de 56% de molécules d’eau et se lient à plus 53 molécules d’eau. L’ensemble de ces propriétés physico-chimiques a permis de répondre aux problématiques industrielles et de formuler un produit de cure, un agent de démoulage et un produit anti-adhérent. / This study is of the reactivity of two types of polyols (glycerol and diglycerol) by direct esterification reaction with undecylenic acid from castor oil. This reaction was catalyzed by dodecylbenzene sulfonic acid (DBSA). The first step was to study of polyol / undecylenic acid reaction systems by physico-chemical approach. The result have shown that these systems give water-in-oil (W / O) emulsion. Adding DBSA and water formed in-situ in polyol/undecylenic acid systems have reduced droplet size from 50 microns to less than 1 μm and form an organized system (micro-reactor). Increasing temperature can simplify transfers in emulsified systems and / or melted gel and to get a monophasic and homogeneous system. The only systems and aided by water formed in-situ assists the organization and structuring of gels. The reaction study of these systems was analyzed by gas chromatography. This showed that when the number of carboxylic acid function sites is less than the hydroxyl function site, synthesis is totally selective to partial esters of the two polyols (glycerol and diglycerol). The yields are higher than 60% in partial glycerol esters and 70% in partial diglycerol esters. The kinetic modeling of this synthesis and regression of kinetic data by the software GEPASI showed that the reaction follows the reversible 2 order and it is athermic. The calculated activation energy is 17 kcal/mol for the synthesis of glycerol monoundecenoate (GMU) and 16 kcal/mol for glycerol diundecenoate (GDU), these values are close to the theoretical values and they show that the reaction is happening at room temperature. Moreover, the response of the surface methodology shows that the variables chosen for the present study are temperature and catalyst concentration have a positive effect on the yield of the GMU. This approach was used to determine the optimum conditions for producing the GMU. Second study performed was of the reactivity of the terminal double bond of the GMU in presence of two oxidizing agents H 2 O 2 / formic acid and metachloroperbenzoic acid (m-CPBA), for synthesized bolaamphiphiles molecules was performed. The H 2 O 2 /formic acid was used to oxidize the double bond of GMU in diol function of glycerol 10,11-dihydroxymonoundecenoate (GMUDiol). The m-CPBA epoxidizes the double bond of GMU to give glycerol 10,11-epoxymonoundécénoate (GMUE). The opening of the epoxide function by aminoalcohol molecules are used to generate the new molecules bolaamphiphiles molecules: the bola ethanolamineglycerol and the bola diaminobutaneglycerol. The third step was the stady of the physico-chemical properties of pure amphiphilic and bolaamphiphiles molecules. The result was shown that all molecules are solvo-surfactants molecules and they are active in the interfaces (liquid/air and liquid/solid). The curves of surface tension of water do not respect the Gibbs rule. GMU and DGMU self- assemble in water and give nano-objects (vesicles and aggregates) in diluted solutions. In hydrogel, the molecules self-assemble in lamellar phase. In this lamellar phase, the amount of water retained is 56% and the number of water molecules strongly linked to the polar heads is 49 moles of water/diglycerol monoundecenoate molecule (DGMU). All these physico-chemical properties have permit to respond to industrial problems such as water retention for the curing product, self-assembly for demoulding concrete and for surface anti-adhesion and adsorption and finally foaming required for the aged bitumen regeneration. For pure bolaamphiphiles molecules (GEMU and ethanolamineglycerol bola) reduce the interfacial tension of water to the limit of the solubility of this bola molecules in water but do not provide a critical aggregation concentration (CAC). They retain more water molecules respectively between 56% and 63% water and the number of water molecules strongly bound with two polar heads groups pure bolaamphiphiles molecules is between 42 and 53.

Les récepteurs couplés de protéines G (RCPG) sont des capteurs biologiques polyvalents responsables de la majorité des réponses cellulaires aux hormones et neurotransmetteurs ainsi que des sens de la vue, de l'odorat et du goût. La transduction des signaux est associée à un ensemble de changements dans la structure tertiaire des récepteurs entraînant l'activation de partenaires intracellulaires dont les protéines G. La dimérisation est un élément central du mode de fonctionnement des RCPG ; cependant, son influence sur la façon dont le signal est transmis est encore mal définie.Nous avons utilisé ici le récepteur BLT1 du leucotriène B4 comme modèle afin d'analyser les changements de conformation au cours de l'activation. Pour cela, nous avons produit le récepteur suivant une approche qui consiste à l'exprimer dans les corps d'inclusion bactériens puis à le renaturer à l'aide de détergents et/ou surfactants originaux. L'accès au récepteur purifié nous a permis de montrer que la protéine G induit une asymétrie dans les changements de conformation au sein de l'homodimère de BLT1. De plus, nous avons pu établir que l'activation de la protéine G se fait essentiellement par le protomère ayant fixé l'agoniste (cis-activation). Enfin, nous avons montré que la forme monomérique du récepteur est parfaitement capable d'induire l'activation de la protéine G, même si le dimère apporte une modulation de la réponse. Ceci indique qu'un monomère de récepteur possède tous les déterminants moléculaires nécessaires à la transmission du signal. L'ensemble de ces résultats apporte un éclairage nouveau sur la façon dont les dimères de RCPG fonctionnent et peuvent moduler la réponse biologique. / G-protein coupled receptors are versatile biological sensors that are responsible for the majority of cellular responses to hormones and neurotransmitters as well as for the sense of sight, smell and taste. Signal transduction is associated with a set of changes in the tertiary structure of the receptor that are recognized by the associated intracellular partners, in particular the G proteins. There is compelling evidence that GPCR can assemble as dimers but the way these assemblies function at the molecular level is still under investigation.We used here the leukotriene B4 receptor BLT1 as a model to analyze the conformational changes occurring during activation. To this end, we first produced the receptor in E. coli inclusion bodies and subsequently folded it back to its native state in vitro using original membrane mimetics. Using the purified dimeric receptor, we showed that (i) the G protein induces an asymmetric arrangement of the BLT1 homodimer where each of the protomers is in a distinct conformation, and (ii) the G protein is cis-activated, i.e. the protomer that binds the agonist also activates Gα. Finally, we brought evidence that, although the dimer fully activates its G protein partner, the monomer has per se all the molecular determinant for an efficient functioning. All these data are original evidence that sheds light into the way GPCR dimers are activated and in turn modulate G protein-mediated signaling.

A imunização transcutânea (TCI) é uma via atrativa para o desenvolvimento de vacinação livre de agulhas, atuando nas APCs da pele, podendo substituir algumas das imunizações convencionais, em termos de facilidade, segurança e eficácia. O presente estudo avaliou a resposta imune da TCI com proteína recombinante de leptospira LipL32, uma proteína altamente conservada em cepas patogênicas e potente candidata vacinal. A TCI com a LipL32 na região abdominal de C57BL-6 foi capaz de primar o sistema imune, suscitando resposta sistêmica com altos níveis de anticorpos contra o antígeno, após reforços subimunizantes, ID e Tc. O padrão de citocinas em cultivo de células do sangue total dos grupos imunizados indicou que a imunização Tc foi capaz de primar o sistema imune, tanto inato quanto adaptativo. O tratamento local ou a coadministração com surfactantes ou PEG não evidenciou ação emoliente ou adjuvante. A coadministração Tc da LipL32 com MPL-A levou a efeito moderador da reação pro-inflamatória, redirecionando a resposta adaptativa, tanto humoral quanto celular. / Transcutaneous immunization (TCI) offers an attractive pathway for the development of needle-free vaccination by acting on APCs of the skin, showing potential to replace conventional immunization, in terms of safety and efficacy. In this study we evaluated the immune response by TCI with recombinant protein of leptospira LipL32, a highly conserved protein among pathogenic strains, a potential vaccine candidate. TCI with LipL32 was evaluated in C57BL-6 mice abdominal region and was able to confer systemic response with high levels of antibodies after subimmunizing ID and Tc boosters. The pattern of cytokines in cell cultures from whole blood of immunized groups indicated that the TCI was able to prime the immune system, for both innate and adaptive response. Local treatment of the skin or coadministration with surfactants and PEG did not show an emollient and an adjuvant action. Co-administration of LipL32 with MPL-A influenced the antibody response as well as showed a moderating effect of the pro-inflammatory reaction, redirecting the adaptive response.

京都大学 / 0048 / 新制・課程博士 / 博士(医学) / 甲第22003号 / 医博第4517号 / 新制||医||1038(附属図書館) / 京都大学大学院医学研究科医学専攻 / (主査)教授 長船 健二, 教授 川口 義弥, 教授 柳田 素子 / 学位規則第4条第1項該当 / Doctor of Medical Science / Kyoto University / DFAM

Content: Leather manufacturing industry uses a lot of water and chemicals, and it discharges large amounts of wastewater. The processing a large amounts of wastewater requires a huge cost. Therefore, reduction of amount of a pollution load in wastewater is a theme in many countries around the world. During the leather process, a lot of pollutants occur in the unhairing process. Some estimate that the amount of pollution generated in the unhairing process accounts for 70% of the entire leather manufacturing process. In this unhairing process, usually a large amount of sulfide is used. Sulfide is known to generate hydrogen sulfide and cause damage to the drain pipe. In Tokyo, strict criteria are set for draining sulfide to sewers. Therefore, reducing the amount of sulfide used is an important task for tanner. In addition, since sulfide has no degreasing effect, a large amount of surfactant is required in the unhairing process. However, to reduce the cost and the load of the wastewater, it is also required to reduce the amount of the surfactant used. Furthermore, in recent years, the types of usable surfactants have also been limited. Therefore, development of a method of effectively removing hair loss and degreasing without using a sulfide is urgent for the leather manufacturing industry. On the other hand, pelts are widely used as raw materials for foods such as gelatin and collagen casing, cosmetics, and pharmaceuticals. However, sulfides are not originally recognized as food additives. Therefore, some companies are concerned about using pelts as a raw material for food using sulfide in the unhairing process. Also from this point of view, it is necessary to develop an unhairing method without using sulfides. The method using sodium hydroxide has been studied for a long time. However, this method is hard in handling, and is difficult to set conditions such as concentration and temperature. That is, while successful at the experimental level, it has not been put to practical use. Therefore, we studied a method to solve the above problem using sodium hydroxide. The method developed this time can reduce the pollutant in waste water, and the amount of water used in the unhairing process to 1/10 or less of the conventional one. Moreover, since it is not influenced by water temperature, it made it possible to stably remove hair irrespective of the season. The finished leather kept sufficient strength. In addition, sodium hydroxide reacts with fat in the skin and turns it into soap, so it shows the degreasing effect and contributes to reduce the dosage of degreasing agent. Take-Away: development of unhairing method without using sulfide contributes to reduce the dosage of degreasing agent reduce the pollutant in waste water

This diploma thesis is concentrated on the interactions between polyelectrolyte (hyaluronan) and cationic surfactant (CTAB). The experiments were performed in an aqueous solution and in an environment of physiological ionic strength (0,15mmoldm-3 NaCl). The determination of the surfactant concentration in solutions was based on the formation of colored complexes of CTAB and picric acid in chloroform. The concentrations of surfactant were measured by UV-VIS spectroscopy. The stability of CTAB+HyA was examined by a dialysis method. The results showed that, regardless of the environment, the presence of HyA in solution reduces the number of free molecules of CTAB which can be determined in the sample. It has been proved that there is an interaction between HyA and surfactant and that CTAB has greater affinity for HyA then for the picric acid. The stability of CTAB+HyA was determined by dialysis of 120 hours. After that time, the concentrations of the retentate and permeate were settled. The results showed that in the membrane remains a certain amount of CTAB bounded to hyaluronan. The system can be suitable for the preparation of targeted carriers of biologically active substances.

Vliv hyaluronanu na micelizaci tenzidů byl studován různými fyzikálně-chemickými metodami. Byly zvoleny dva kationaktivní tenzidy, a to tetradecyltrimethylammonium bromid (TTAB) a cetyltrimethylammonium bromid (CTAB). Metoda izotermické titrační kalorimetrie byla využita pro stanovení entalpie micelizace, tenziometrie popisuje povrchové vlastnosti daných vzorků. Byl sledován také vliv různé molekulové hmotnosti použitého hyaluronanu a délka alkylového řetězce tenzidu na agregační chování daného systému. Výsledkem jsou hodnoty kritické micelární nebo agregační koncentrace tenzidu. V neposlední řadě se diskutuje využití agregátů hyaluronan-tenzid jako možné nosiče pro cílenou distribuci léčiv.

<div>In many natural and industrial processes, bubbles are exposed to surface-active contaminants (surfactants) that may cover the whole or part of the bubble interface. A partial coverage of the bubble interface results in a spontaneous self-propulsion mechanism, which is yet poorly understood.</div><div>The main goal of this study is to enhance the understanding of the flow and interfacial mechanisms underlying the self-propulsion of small surfactant contaminated bubbles. The focus is on characterizing the self-propulsion regimes generated by the presence of surface-active species, and the influence of surfactant activity and surface coverage on the active bubble motion. </div><div>The study was developed by simultaneously solving the full system of partial differential equations governing the free-surface flow physics and the surfactant transport on the deforming bubble interface using multi-scale numerical simulation. </div><div>Results show in microscopic detail how surface tension gradients (Marangoni stresses) induced by the uneven interfacial coverage produce spontaneous hydrodynamics flows (Marangoni flows) on the surrounding liquid, leading to bubble motion. Results also establish the influence of both surfactant activity and interfacial coverage on total displacement and average bubble velocity at the macroscale. </div><div>Findings from this research improve the fundamental understanding of the free-surface dynamics of self-propulsion and the associated transport of surface-active species, which are critical to important natural and technological processes, ranging from the Marangoni propulsion of microorganisms to the active motion of bubbles and droplets in microfluidic devices. Overall, the findings advance our understanding of active matter behavior; that is, the behavior of material systems with members able to transduce surface energy and mass transport into active movement.</div>