This thesis reports a passive method for Fermi level regulation in quantum dot assemblies through ground state transfer between QDs. Here, ZnTe/CdS, and PbSe/CdSe core/shell QDs were used as valence band electron donors, while Cu containing CdS or ZnSe acts as electron acceptor QDs. Prior to study of ground state charge transfer process, this report discusses the synthesis of ZnTe/CdS, and PbSe/CdSe core shell QDs, which are later used to study charge transfer. Since ZnTe QDs are unstable and prone to oxidation, a CdS coated ZnTe QDs were used. Growing a CdS shell on ZnTe core is difficult because high reduction potential of Te. To overcome this problem, partially reduced sulphur is used for the synthesis of ZnTe/CdS. The peculiar optical properties exhibited by ZnTe/CdS also have been discussed. Even though the synthesis of Lead chalcogenide nanoparticles has been investigated previously, certain inconsistencies between the behavior expected from known mechanisms and empirical observations. An anion exchange mechanism is proposed and demonstrated to be involved in PbSe formation. Both ZnTe and PbSe based QDs are extensively used to study hole injection and copper containing QDs were used as acceptors. The charge transfer has been studied using optical spectroscopy. The structure and composition of the assemblies was identified using powder crystallography, electron-microscopy and composition analysis. The unique physical and chemical properties of these materials are exciting both fundamentally as well as from the point of view of applications.

Les nouvelles molécules thérapeutiques présentent la plupart du temps une faible solubilité aqueuse, à l’origine d’une biodisponibilité restreinte lors de leur administration orale. La réduction de taille des cristaux de substance active à l’échelle submicronique (= production de nanocristaux) s’est imposée comme une voie majeure de formulation au cours de ces dernières années.Afin de pallier des problèmes d’instabilité et d’aboutir à des formes solides pratiques d’utilisation pour les patients, une étape de séchage est généralement effectuée après production des nanocristaux en suspension. L’objectif principal de cette étape est de générer un produit présentant à la fois des propriétés facilitant le déroulement d’étapes procédés avales mais aussi et surtout de prévenir l’agrégation des nanocristaux au risque de compromettre leur dissolution après administration.Plusieurs techniques sont aujourd’hui utilisées dans l’industrie pharmaceutique telle que l’enrobage/granulation en lit d’air fluidisé et le spray drying. Parallèlement à l’élaboration d’une « formulation standard » pour ces deux méthodes de référence, deux techniques innovantes de lyophilisation ont été investiguées dans ce travail. La stabilisation de nanocristaux de kétoconazole par cryopelletization et active freeze drying a été démontrée et les paramètres clefs identifiés. Les produits générés par ces deux techniques, respectivement sous forme de pellets ou de poudre fine, ont été comparés à ceux conçus par enrobage en lit d’air fluidisé et spray drying. En conclusion, ces travaux indiquent que la cryopelletization et l’active freeze drying se positionnent comme des procédés d’intérêt de seconde intention, permettant de traiter des cas particuliers (molécules sensibles au stress thermique, à l’humidité et/ou couteuses). / Newly active pharmaceutical ingredients very often suffer from low aqueous solubility, a fact that in many cases can lead to poor oral bioavailability. Nanosizing, referring to drug nanocrystals production by size reduction, has demonstrated over the past few years a great potential to overcome this major issue.Since solid oral dosage forms are generally preferred due to stability reasons and patient convenience, the production of nanocrystals in a liquid medium is usually followed by a drying step. The main objective of this drying step is to generate a product suitable for downstream processing operations while at the same time preventing nanocrystal aggregation which can adversely affect the dissolution performance of the dry product in vivo.Several drying techniques such as spray drying and coating/granulation in fluidized bed have been successfully implemented in the pharmaceutical industry. In this work, two innovative freeze drying techniques were investigated and compared to the two above mentioned reference methods. The suitability of cryopelletization and active freeze drying to stabilize ketoconazole nanocrystals has been demonstrated and the key process parameters identified. The formulations generated by these two innovative techniques in the form of pellets or fine powder particles, respectively, were compared to the previously manufactured by fluidized bed and spray drying. In conclusion, this work presents cryopelletization and active freeze drying as suitable second-line processes with potential to address the drying of formulations containing problematic molecules sensible to thermal stress, moisture and/or presenting high production costs.

Metallic glasses possess attractive properties, such as high strength, good corrosion resistance, and superior soft magnetic performance. They also serve as precursors for synthesizing nanocrystalline materials. In addition, a new class of composites having crystalline phases embedded in amorphous matrix is evolving based on selective crystallization of metallic glasses. Therefore, crystallization of metallic glasses and its effects on properties has been a subject of interest. Previous investigations from our research group related to laser assisted crystallization of Fe-Si-B metallic glass (an excellent soft magnetic material by itself) showed a further improvement in soft magnetic performance. However, a fundamental understanding of crystallization and mechanical performance of laser treated metallic glass was essential from application point of view. In light of this, the current work employed an integrated experimental and computational approach to understand crystallization and its effects on tensile behavior of laser treated Fe-Si-B metallic glass. The time temperature cycles during laser treatments were predicted using a finite element thermal model. Structural changes in laser treated Fe-Si-B metallic glass including crystallization and phase evolution were investigated with the aid of X-ray diffraction, differential scanning calorimetry, resistivity measurements, and transmission electron microscopy. The mechanical behavior was evaluated by uniaxial tensile tests with an InstronTM universal testing machine. Fracture surfaces of the metallic glass were observed using scanning electron microscopy and site specific transmission electron microscopy. Fe-Si-B metallic glass samples treated with lower laser fluence (<0.49 J/mm2) underwent structural relaxation while higher laser flounces led to partial crystallization. The crystallization temperature experienced an upward shift due to rapid heating rates of the order of 104 K/s during laser treatments. The heating cycle was followed by termination of laser upon treatment attainment of peak temperature and rapid cooling of the similar order. Such dynamic effects resulted in premature arrest of the crystallite growth leading to formation of fine crystallites/grain (~32 nm) of α-(Fe,Si) as the major component and Fe2B as the minor component. The structural relaxation, crystallization fractions of 5.6–8.6 Vol% with α-(Fe,Si) as the main component, and crystallite/grain size of the order of 12 nm obtained in laser fluence range of 0.39-0.49 J/mm2 had minimal/no influence on tensile behavior of the laser treated Fe-Si-B metallic glass foils. An increase in laser fluence led to progressive increase in crystallization fractions with considerable amounts of Fe2B (2-6 Vol%) and increase in grain size to ~30 nm. Such a microstructural evolution severely reduced the strength of Fe-Si-B metallic glass. Moreover, there was a transition in fracture surface morphology of laser treated Fe-Si-B metallic glass from vein pattern to chevron pattern. Tensile loading lacked any marked influence on the crystallization behavior of as-cast and structurally relaxed laser-treated metallic glass foils. However, a significant crystallite/grain growth/coarsening of the order of two and half times was observed in the fractured region compared to the region around it for the laser-treated partially crystallized metallic glass foils. The simultaneous effects of stress generation and temperature rise during tensile loading were considered to play a key role in crystallite/grain growth/coarsening.

Colloidal semiconductor nanocrystals (NCs) have attracted a great deal of interest as bright and stable chromophores for a variety of applications. Their superior physicochemical properties depend on characteristics of the inorganic core, as well as on the chemical nature and structure of the stabilizing organic ligand shell. To evaluate the promising material, a thorough knowledge of structure-property relationships is still demanded. The present work addresses this challenge to three water-soluble NC systems, namely thiol-capped CdTe, thiol-capped CdHgTe, and DNA-functionalized CdTe NCs with special emphasis on the investigation of structure, modification, and influence of the ligand shell. Remarkably, CdTe NCs show bright emission in the visible spectral region and can be synthesized in high quality directly in water. It was shown that the aqueous synthesis also facilitates the preparation of strongly near-infrared (NIR) emitting CdHgTe NCs. The current work presents a detailed study on parameters, by which the emission can be tuned, such as the growth time, the initial Cd : Hg ratio, and the choice of ligand. These insights contribute to the knowledge, which is essential for the design of highly emissive and long-term stable NIR emitting NCs. Further variations of the NC/ligand system include the modification of the ligand shell of CdTe NCs with oligonucleotides based on the strong attachment of DNA molecules to the NC. The successful functionalization of NCs with single-stranded DNA molecules is very promising for the precise and programmable assembly of NCs using DNA origami structures as templates. For both, functionality and optical properties, the surface chemistry of the NCs plays a substantial role and was subject to an extensive investigation. As there is no generally applicable technique to determine the amount of stabilizers and the structure of the ligand shell, the presented study is based on a combination of various methods particularly tailored to the analysis of water-soluble CdTe NCs capped by short-chain thiols. CdTe NCs served as a model system for the described analysis of the ligand shell, since they are thoroughly studied regarding synthesis and features of the core. Aiming for the quantification of thiols, a straightforward colorimetric assay, the Ellman\'s test, is for the first time introduced for the analysis of NCs. Accompanied by elemental analysis an approximate number of thiols per NC becomes accessible. Moreover, theoretical calculations were performed to estimate the amount of ligand that would cover the NC in a monolayer of covalently bound molecules. In contrast to these results, the experimental values point to a larger amount of thiols immobilized on the NC. Attempts to remove the ligand indicate the presence of Cd in the ligand shell and thermogravimetric studies show that the ligands are not loosely assembled in the ligand shell. The outstanding conclusion of these findings involves the presence of Cd-thiol complexes in the ligand shell. Further results unambiguously show that the amount of Cd-thiol complexes present in the NC solution strongly influences the concentration-dependent emission yield of the NCs. Additional studies dedicated to the considerable influence of the ligand shell highlight a strong effect of pH, NC concentration, type and purity of the solvent, and the number of precipitation steps on the emission of water-soluble semiconductor NCs. These substantial investigations emphasize the need to carefully control the conditions applied for handling, optical measurements, and application of NCs. In order to gain a deeper insight into the complex structure of the native ligand shell, techniques deliberately chosen for the in situ analysis were applied for thioglycolic acid-capped CdTe NCs. Information from dynamic light scattering (DLS) regarding the stability and the shell thickness are consistent with previous results showing a large ligand network on the NC surface and a decreasing stability of the NCs upon dilution. Importantly, nuclear magnetic resonance (NMR) spectroscopy allows for the distinction of bound and free ligands directly in solution and proves the presence of these species for the NCs studied. In particular, the results indicate that the ligands are not strongly bound to the NC core and that both, free and bound ligand species, consist of modified thiol molecules, such as Cd-thiol complexes. These findings support previous assumptions and allow to establish a distinct picture of the ligand shell of water-soluble semiconductor NCs. Further insights were obtained from small-angle X-ray scattering (SAXS), which facilitates the identification and the determination of the composition of NC core as well as ligand shell. Element-specific SAXS yields the final proof of the presence of Cd in the ligand shell. The model developed for the optimal fitting of the experimental scattering curves additionally confirms the findings from the other methods. In conclusion, the present work contributes to the challenging goal of a comprehensive knowledge of interactions between the NC core and the ligands. The fundamental development of a structural model of water-soluble CdTe NCs including information on stoichiometries is accomplished by the combination of the techniques presented and emphasizes the challenge to assign a clear border between the ligand shell and the Cd-thiol complexes in solution. Altogether, CdTe NCs capped by thioglycolic acid are best described by a crystalline core surrounded by a water-swollen Cd-thiolate shell that considerably affects the optical properties of the system. Notably, the results of the versatile study provide the opportunity to control the overall properties and to evaluate water-soluble semiconductor NCs for particular applications in photonics and optoelectronics.

Colloidal semiconductor quantum dots (QDs) have gained substantial interest as adjustable, bright and spectrally tunable fluorophores in the past decades. Besides their in-depth analyses in the scientific community, first industrial applications as color conversion and color enrichment materials were implemented. However, stability and processability are essential for their successful use in these and further applications. Methods to embed QDs into oxides or polymers can only partially solve this challenge. Recently, our group introduced the embedding of QDs into ionic salts, which holds several advantages in comparison to polymer or oxide-based counterparts. Both gas permeability and environmental-related degradation processes are negligible, making these composites an almost perfect choice of material. To evaluate this new class of QD-salt mixed crystals, a thorough understanding of the formation procedure and the final composites is needed. The present work is focused on embedding both aqueous-based and oil-based metal-chalcogenide QDs into several ionic salts and the investigations of their optical and chemical properties upon incorporation into the mixed crystals. QDs with well-known, reproducible and high-quality synthetic protocols are chosen as emissive species. CdTe QDs were incorporated into NaCl as host matrix by using the straightforward "classical" method. The resulting mixed crystals of various shapes and beautiful colors preserve the strong luminescence of the incorporated QDs. Besides NaCl, also borax and other salts are used as host matrices. Mercaptopropionic acid stabilized CdTe QDs can easily be co-crystallized with NaCl, while thioglycolic acid as stabilizing agent results in only weakly emitting powder-like mixed crystals. This challenge was overcome by adjusting the pH, the amount of free stabilizer and the type of salt used, demonstrating the reproducible incorporation of highest-quality CdTe QDs capped with thioglycolic acid into NaCl and KCl salt crystals. A disadvantage of the "classical" mixed crystallization procedure was its long duration which prevents a straightforward transfer of the protocol to less stable QD colloids, e.g., initially oil-based, ligand exchanged QDs. To address this challenge, the "Liquid-liquid-diffusion-assisted-crystallization" (LLDC) method is introduced. By applying the LLDC, a substantially accelerated ionic crystallization of the QDs is shown, reducing the crystallization time needed by one order of magnitude. This fast process opens the field of incorporating ligand-exchanged Cd-free QDs into NaCl matrices. To overcome the need for a ligand exchange, the LLDC can also be extended towards a two-step approach. In this modified version, the seed-mediated LLDC provides for the first time the ability to incorporate oil-based QDs directly into ionic matrices without a prior phase transfer. The ionic salts appear to be very tight matrices, ensuring the protection of the QDs from the environment. As one of the main results, these matrices provide extraordinary high photo- and chemical stability. It is further demonstrated with absolute measurements of photoluminescence quantum yields (PL-QYs), that the PL-QYs of aqueous CdTe QDs can be considerably increased upon incorporation into a salt matrix by applying the "classical" crystallization procedure. The achievable PL enhancement factors depend strongly on the PL-QYs of the parent QDs and can be described by the change of the dielectric surrounding as well as the passivation of the QD surface. Studies on CdSe/ZnS in NaCl and CdTe in borax showed a crystal-induced PL-QY increase below the values expected for the respective change of the refractive index, supporting the derived hypothesis of surface defect curing by a CdClx formation as one main factor for PL-QY enhancement. The mixed crystals developed in this work show a high suitability as color conversion materials regarding both their stability and spectral tunability. First proof-of-concept devices provide promising results. However, a combination of the highest figures of merit at the same time is intended. This ambitious goal is reached by implementing a model-experimental feedback approach which ensures the desired high optical performance of the used emitters throughout all intermediate steps. Based on the approach, a white LED combining an incandescent-like warm white with an exceptional high color rendering index and a luminous efficacy of radiation is prepared. It is the first time that a combination of this highly related figures of merit could be reached using QD-based color converters. Furthermore, the idea of embedding QDs into ionic matrices gained considerable interest in the scientific community, resulting in various publications of other research groups based on the results presented here. In summary, the present work provides a profound understanding how this new class of QD-salt mixed crystal composites can be efficiently prepared. Applying the different crystallization methods and by changing the matrix material, mixed crystals emitting from blue to the near infrared region of the electromagnetic spectrum can be fabricated using both Cd-containing and Cd-free QDs. The resulting composites show extraordinary optical properties, combining the QDs spectral tunability with the rigid and tight ionic matrix of the salt. Finally, their utilization as a color conversion material resulted in a high-quality white LED that, for the first time, combines an incandescent-like hue with outstanding optical efficacy and color rendering properties. Besides that, the mixed crystals offer huge potential in other high-quality applications which apply photonic and optoelectronic components.

In Silizium-Nanokristall-Speichern werden im Gate-Oxid eines Feldeffekttransistors eingebettete Silizium Nanokristalle genutzt, um Elektronen lokal zu speichern. Die gespeicherte Ladung bestimmt dann den Zustand der Speicherzelle. Ein wichtiger Aspekt in der Technologie dieser Speicher ist die Erzeugung der Nanokristalle mit einerwohldefinierten Größenverteilung und einem bestimmten Konzentrationsprofil im Gate-Oxid. In der vorliegenden Arbeit wurde dazu ein sehr flexibler Ansatz untersucht: die thermische Ausheilung von SiO2/SiOx (x &amp;lt; 2) Stapelschichten. Es wurde ein Sputterverfahren entwickelt, das die Abscheidung von SiO2 und SiOx Schichten beliebiger Zusammensetzung erlaubt. Die Bildung der Nanokristalle wurde in Abhängigkeit vom Ausheilregime und der SiOx Zusammensetzung charakterisiert, wobei unter anderem Methoden wie Photolumineszenz, Infrarot-Absorption, spektroskopische Ellipsometrie und Elektronenmikroskopie eingesetzt wurden. Anhand von MOS-Kondensatoren wurden die elektrischen Eigenschaften derart hergestellter Speicherzellen untersucht. Die Funktionalität der durch Sputterverfahren hergestellten Nanokristall-Speicher wurde erfolgreich nachgewiesen. / In silicon nanocrystal memories, electronic charge is discretely stored in isolated silicon nanocrystals embedded in the gate oxide of a field effect transistor. The stored charge determines the state of the memory cell. One important aspect in the technology of silicon nanocrystal memories is the formation of nanocrystals near the SiO2-Si interface, since both, the size distribution and the depth profile of the area density of nanocrystals must be controlled. This work has focussed on the formation of gate oxide stacks with embedded nanocrystals using a very flexible approach: the thermal annealing of SiO2/SiOx (x &amp;lt; 2) stacks. A sputter deposition method allowing to deposit SiO2 and SiOx films of arbitrary composition has been developed and optimized. The formation of Si NC during thermal annealing of SiOX has been investigated experimentally as a function of SiOx composition and annealing regime using techniques such as photoluminescence, infrared absorption, spectral ellipsometry, and electron microscopy. To proof the concept, silicon nanocrystal memory capacitors have been prepared and characterized. The functionality of silicon nanocrystal memory devices based on sputtered gate oxide stacks has been successfully demonstrated.

Metal-Oxide-Silicon Field-Effect-Transistors with a layer of electrically isolated Si nanocrystals (NCs) embedded in the gate oxide are known to improve conventional floating gate flash memories. Data retention, program and erase speeds as well as the memory operation voltages can be substantially improved due to the discrete charge storage in the isolated Si NCs. Using ion beam synthesis, Si NCs can be fabricated along with standard CMOS processing. The optimization of the location and size of ion beam synthesized Si NCs requires a deeper understanding of the mechanisms involved, which determine (i) the built-up of Si supersaturation by high-fluence ion implantation and (ii) NC formation by phase separation. For that aim, process simulations have been conducted that address both aspects on a fundamental level and, on the other hand, are able to avoid tedious experiments. The built-up of a Si supersaturation by high-fluence ion implantation were studied using dynamic binary collision calculations with TRIDYN and have lead to a prediction of Si excess depth profiles in thin gate oxides of a remarkable quality. These simulations include in a natural manner high fluence implantation effects as target erosion by sputtering, target swelling and ion beam mixing. The second stage of ion beam synthesis is modeled with the help of a tailored kinetic Monte Carlo code that combines a detailed kinetic description of phase separation on atomic level with the required degree of abstraction that is necessary to span the timescales involved. Large ensembles of Si NCs were simulated reaching the late stages of NC formation and dissolution at simulation sizes that allowed a direct comparison with experimental studies, e.g. with electron energy loss resolved TEM investigations. These comparisons reveal a nice degree of agreement, e.g. in terms of predicted and observed precipitate morphologies for different ion fluences. However, they also point clearly onto impact of additional external influences as, e.g., the oxidation of implanted Si by absorbed humidity, which was identified with the help of these process simulations. Moreover, these simulations are utilized as a general tool to identify optimum processing regimes for a tailored Si NC formation for NC memories. It is shown that key properties for NC memories as the tunneling distance from the transistor channel to the Si NCs, the NC morphology, size and density can be adjusted accurately despite of the involved degree of self-organization. Furthermore, possible lateral electron tunneling between neighboring Si NCs is evaluated on the basis of the performed kinetic Monte Carlo simulations.

Structure, composition, and optical properties of colloidal mercaptoacetate-stabilized Cu2ZnSnS4 (CZTS) nanocrystal inks produced by a “green” method directly in aqueous solutions were characterized. A size-selective precipitation procedure using 2-propanol as a non-solvent allows separating a series of fractions of CZTS nanocrystals with an average size (bandgap) varying from 3 nm (1.72 eV) to 2 nm (2.04 eV). The size-selected CZTS nanocrystals revealed also phonon confinement, with the main phonon mode frequency varying by about 4 cm−1 between 2 nm and 3 nm NCs.

Im Folgenden werden Transferprozesse in Nanohybridsystemen theoretisch untersucht. Diese Hybridsysteme sind vielversprechende Kandidaten für neue optoelektronische Anwendungen und erfahren daher ein erhebliches Forschungsinteresse. Jedoch beschränken sich Arbeiten darüber hauptsächlich auf experimentelle Untersuchungen und kaum auf die dazugehörige theoretische Beschreibung. Bei den theoretischen Betrachtungen treten entscheidende Limitierungen auf. Es werden entweder Details auf der atomaren Ebene vernachlässigt oder Systemgrößen betrachtet, die wesentlich kleiner als im Experiment sind. Diese Thesis zeigt, wie die bestehenden Theorien verbessert werden können und erweitert die bisherigen Untersuchungen durch die Betrachtung von vier neuen hoch relevanten Nanohybridsystemen. Das erste System ist eine Nanostruktur, die aus einem Au-Kern und einer CdS-Schale besteht. Beim zweiten System wurde eine ZnO/Para-Sexiphenyl Nanogrenzfläche untersucht. Die zwei anderen Systeme beinhalten jeweils einen CdSe-Nanokristall, der entweder mit einem Pheophorbide-a-Molekül oder mit einem röhrenförmigen Farbstoffaggregat wechselwirkt. In allen Systemen ist der Anregungsenergie-Transfer ein entscheidender Transfermechanismus und steht im Fokus dieser Arbeit. Die betrachteten Hybridsysteme bestehen aus zehntausenden Atomen und machen daher eine individuelle Berechnung der einzelnen Subsysteme sowie deren gegenseitiger Wechselwirkung notwendig. Die Halbleiter-Nanostrukturen werden mit der Tight-Binding-Methode und der Methode der Konfigurationswechselwirkung beschrieben. Für das molekulare System wird die Dichtefunktionaltheorie verwendet. Die dazugehörigen Rechnungen wurden von T. Plehn ausgeführt. Das metallische Nanoteilchen wird durch quantisierte Plasmon-Moden beschrieben. Die verwendeten Theorien ermöglichen eine Berechnung von Anregungsenergietransfer in Nanohybridsystemen von bisher nicht gekannter Systemgröße und Detailgrad. / In the following, transfer phenomena in nanohybrid systems are investigated theoretically. Such hybrid systems are promising candidates for novel optoelectronic devices and have attracted considerable interest. Despite a vast amount of experimental studies, only a small number of theoretical investigations exist so far. Furthermore, most of the theoretical work shows substantial limitations by either neglecting the atomistic details of the structure or drastically reducing the system size far below the typical device extension. The present thesis shows how existing theories can be improved. This thesis also expands previous theoretical investigations by developing models for four new and highly relevant nanohybrid systems. The first system is a spherical nanostructure consisting of an Au core and a CdS shell. By contrast, the second system resembles a finite nanointerface built up by a ZnO nanocrystal and a para-sexiphenyl aggregate. For the last two systems, a CdSe nanocrystal couples either to a pheophorbide-a molecule or to a tubular dye aggregate. In all of these systems, excitation energy transfer is an essential transfer mechanism and is, therefore, in the focus of this work. The considered hybrid systems consist of tens of thousands of atoms and, consequently, require an individual modeling of the constituents and their mutual coupling. For each material class, suitable methods are applied. The modeling of semiconductor nanocrystals is done by the tight-binding method, combined with a configuration interaction scheme. For the simulation of the molecular systems, the density functional theory is applied. T. Plehn performed the corresponding calculations. For the metal nanoparticle, a model based on quantized plasmon modes is utilized. As a consequence of these theories, excitation energy transfer calculations in hybrid systems are possible with unprecedented system size and complexity.

Funktionalisierte organische Perylenbisimidfarbstoffe (PBI) und aus Cadmiumselenid bestehende Halbleiternanokristalle werden hinsichtlich physikalischer sowie chemischer Wechselwirkungsprozesse miteinander und mit ihrer Umgebung mittels zeitaufgelöster optischer Spektroskopie untersucht. Im Mittelpunkt der Studien an diesem organisch/anorganischen Modellsystem nanoskopischer Größe steht die Aggregatbildungskinetik und die Identifikation und Quantifizierung von Transferpozessen. Die Anbindung der gut löslichen PBI-Farbstoffe an die Oberfläche solcher Halbleiternanokristalle mittels spezieller Ankergruppen wird durch Selbstorganisation in Lösung realisiert. Die Kombination von Absorptions- und zeitaufgelöster Fluoreszenzspektroskopie zeigt einen unterschiedlich starken Einfluss von Liganden und Farbstoffen auf die Fluoreszenzlöschung der Nanokristalle und belegt, dass Resonanzenergietransfer zum Farbstoff nur in sehr geringem Maße die physikalische Ursache der Fluoreszenzlöschung ist. Die Anzahl adsorbierter Farbstoffe und die Stärke der Fluoreszenzlöschung eines einzelnen Farbstoffmoleküls werden aus zeitaufgelösten Einzelmolekülexperimenten an immobilisierten Emittern gewonnen, welche den direkten spektroskopischen Zugang zur Verteilung gebundener und freier Farbstoffe/Nanokristalle erlaubt. Darüber hinaus werden ankergruppen- und umgebungsspezifische Einflüsse auf die Konformations- und Orientierungsdynamik von Perylenbisimidmolekülen dargestellt. Abschließend werden photo-physikalische Gemeinsamkeiten chemisch unterschiedlich hervorgerufener Fluoreszenzlöschungsprozesse herausgearbeitet und im Kontext von Einzelkristall-Blinkprozessen diskutiert.