Modern breech-loading rifles flooded into Arabia and the region around the Persian Gulf between 1880 and World War I. This work examines in detail, and analyzes, the introduction of modern arms to Arabia, the origin of those arms, the trade patterns by which they were moved, and the international and local political factors that affected the trade. The international arms trade was driven by three major factors. First, the rapid technological development of small arms in the nineteenth century fed the market, resulting in the availability of hundreds of thousands of obsolete military rifles for resale. Each time new rifles were adopted by the armies of Europe, old stocks were dumped on the private arms market. Second, international politics and European colonial rivalry contributed to the growth and maintenance of the arms trade. The French Consul at Muscat protected the trade in the Persian Gulf, while French arms dealers commanded a substantial portion of the trade. British efforts to slow the flow of arms through Muscat was hampered by European politics. Third, the internal politics of the region created a demand for the modern arms. Inside Arabia, the resurgent Saudis fought Rashidis and Hashimites in a series of wars, while other tribal raids and wars further built the demand for modern rifles: if one group had modern weapons, its enemies felt a need for them also. Outside Arabia, a strong demand for weapons in Persia and on the Northwest Frontier of India helped pull weapons to the markets of the Gulf. This thesis deals first with the changing technology of weapons in the nineteenth century, so that the military impact of the new weapons can be understood. The types of modern rifles introduced to the Peninsula is then reviewed, finding that the Peabody-Martini and the Martini-Henry, and their numerous variations, were the weapons most commonly imported in the decades around the turn of the century. With this information as background, the international politics of the arms trade are examined. Emphasis is on the Anglo-French rivalry at Muscat that gave treaty protection to French arms dealers. European fears that modern arms would reach Africa and make colonial control of the continent difficult or impossible led, in 1890, to the arms control provisions of the General Act of Brussels. The Act did not, however, extend to Arabia. The heart of the work is a detailed examination and analysis of the arms trade in and around Arabia. The arms trade in the region was centered in two main entrepots, Djibouti in French Somaliland and Muscat in southeast Arabia. By the late l890s, the bulk of the trade was passing through the Suez Canal before transshipment at one of these ports. Just over half of the arms reaching Muscat were exported to Persia and the Northwest Frontier, with the remainder reaching Arabia or Mesopotamia. The patterns of the private arms trade were complex, both at sea and on land, and are discussed at length. The political use of weapons by the Ottoman Government, and by European states, contributed to the flood of guns into Arabia. The Ottomans, in particular, used their stocks of obsolete weapons to arm their client tribes in Arabia. Ottoman purchases of Sniders, Martinis, and finally Mausers, gave them a constant supply of older rifles for distribution. The arms trade in Arabia was controlled by international and local political developments, and fed by the availability of modern arms on the international market. The trade was complex and impossible to prevent so long as the European states and the Ottomans continued to sell or distribute obsolete rifles as new guns were adopted.

This master's thesis focuses on Russian international trade of conventional weapons. Arms trade had played an important role during the Cold War as a tool to gain influence. Currently, Russia is using it to regain the influence it had lost after the dissolution of the Soviet Union in various regions around the world. At the same time, Russia is the second largest arms exporter after the United States. The thesis briefly addresses past Russian arms trade, but the main focus is on the decade between 2010 and 2020. It answers the question whether Russia currently uses its arms trade opportunistically to only maximalise its economic profit or whether it serves as a part of a larger strategy to balance the influence of the United States. The work focuses on Asia, the MENA region, and Latin America. It analyses circumstances surrounding arms deliveries from Russia into the countries in these regions. The thesis consists of several case studies, which illustrate the evolution of Russian approach towards arms trade. It reaches the conclusion that, for Russia, international arms trade is an important tool to help reach its foreign policy goals. Russia maintains strong and stable relations with the most important trade partners to support its defence industry. At the same time, other countries receive...

<p>  </p> <p>Metal 3D printing is the industry standard for manufacturing experimental suppressors due to the limitations of conventional, subtractive machining methods. Long print times, difficulty sintering, and cleaning of metal 3D printed suppressor components limit the development time. Plastic printed components are able to be produced quicker, safer, and at a lower cost than their metal 3D printed counterparts. Reducing the time and cost of manufacturing will allow for an increased pace of innovations in suppressor design.</p> <p><br></p> <p>Utilizing Finite Element Analysis (FEA) in combination with Computational Fluid Dynamics (CFD) will expedite the process of designing 3D printed plastic suppressors. Solidworks FEA determined the maximum stress applied to the blast chamber of the plastic suppressor. ANSYS Fluent CFD simulations were used to qualitatively compare the sound pressure levels of an unsuppressed and suppressed 22LR pistol. Comparing the results of the CFD simulations gave insight into the effectiveness of the selected baffle structure.</p> <p><br></p> <p>A prototype 3D printed suppressor was optimized for strength according to manufacturing practices for printed plastic small arms. Testing occurred at an indoor range where peak impulse noise was measured for an unsuppressed 22LR pistol and a plastic printed suppressor. The printed suppressor reduced the small arms impulse noise from 150.5 dB(spl) to 132.4 dB(spl). Impulse noises below the pain threshold of 140 dB(spl) do not require hearing protection for operation. Utilizing FEA, CFD, and FDM prototyping methods in this work has laid the foundation for future works in the rapid prototyping and optimizations of suppressors for small arms.</p>

This paper examines the inter-relationships in post-conflict contexts between DDR programmes and processes on the one hand, and wider arms management and SALW control programmes on the other. It is a contribution to the international project "on DDR and Human Security: Post-conflict security building and the interests of the poor‟, and aims to complement the four other Thematic working papers of this Project. It argues that greater co-coordination, and often integration, between DDR and civilian arms management/reduction programmes is needed to promote human security in most countries emerging from conflict, within the framework of a wider comprehensive strategy for enhancing security from fear and violence that also includes security sector reform.

Yes / Welcome to the first issue of the Genomics Monitor. The Genomics Monitor provides information and analysis on developments in the international regulations relevant to the control of the biotechnology revolution. This introductory issue outlines the full range of applicable regulations at the international level - providing details on each regulation's aims, provisions, development and current status. Thirty-five key regulations are covered within the areas of arms control, health and disease control, environmental protection, trade, drugs control and the social and ethical impacts of human genetics. Because this Issue was launched in mid-November 2006 - just prior to the Sixth Review Conference of the Biological Weapons Convention - there is also a section covering Key Points for the Conference. It is clear from the content of the Monitor that there are significant connections between the rules in the different issue areas as they apply to biotechnology. Because of these connections, awareness of developments throughout the set of regulations is important to ensure they develop in a mutually supportive manner. A key aim of this and future Issues is therefore to raise awareness of the connections between the regulations and highlight cross-cutting work being undertaken by associated international organisations. The Genomics Monitor is of relevance to anyone interested in the international regulation of biotechnology, and of particular use to those involved in informing and making policy in this area. / Carnegie Corporation

No description available.

No description available.

Weapons can be good for their own safety at the same time, weapons can be a way to make money, by selling weapons. On the other hand, weapons can be a way to oppress people and protect their interests. The arms trade has been an important part of the Swedish economy. A significantly important thing that is increasingly normalized today is more arms exports to more countries This research problem I want to address is Sweden’s arms and munition exports to Saudi Arabia and the UAE between 2015 and 2020. It was in 2015 that Yemen war took place, and these countries chose to expand and strengthen their defense force to battle their enemies in the Yemen war. The purpose of this essay is how can Sweden’s weapons and munition exports to the United Arab Emirates and Saudi Arabia be explained based on realism and liberalism. Realism and liberalism are theories that can help me to examine and understand the subject I chose. The subject is very controversial because of the humanitarian situation in Yemen and very interesting to examine. The thesis' approach will be carried out based on qualitative methods where I will use content analysis. Qualitative methods mean that all material collected during the work leads to a desire to dig deeper to analyze. My approach will consist of mass media articles, internet slurs, and debate articles, these sources publish by magazines, collections, and other sources. As a result, Sweden has expanded its arms and munitions exports to Saudi Arabia and the UAE. The result of the study shows that realism characterizes the international scene and international relations.

Despite increasing levels of military spending and a growing number of recurring conflicts, research has until now failed to consider the impact of arms transfers on the durability of peace. Investigating the recurrence of conflicts allows us to delve deeper into the enduring impact of arms transfers, shedding light on whether weapons induce, suppress, or merely postpone conflict relapse. This thesis studies the impact of post-conflict arms transfers on the likelihood of conflict recurrence, hypothesizing that the effect is conditional on the outcome of the previous conflict. By conducting a multinomial logistic regression analysis, the initial results of this study imply that post-conflict arms transfers can have a stabilizing effect, regardless of whether the initial conflict ended in a military victory or a negotiated settlement. However, a closer analysis of results implies that the advantages and disadvantages of arms transfers are highly contextual and depend on a series of factors that may fuel or contain violence.

No / Scientific and technological change in the life sciences is currently transforming the problem of preventing biological warfare and biological terrorism. This transformation will demand a radical and rigorous new approach to biochemical arms control, for which the existing prohibition regimes for chemical and biological weapons are necessary but insufficient building blocks. Examples from the areas of immunology, neurosciences, and the neuroendocrine-immune system are used to show the magnitude of the problem. This book will conclude with outlining additional measures required to control biochemical weapons in the 2lst Century.