This is a material driven study that explores how post-processing of a 3D-printed biocomposite may increase its utility in the public furniture industry. The study thereby aims to contribute insights in material development and inspire a shift in practices that pushes the industry towards a more sustainable design process. By studying theories on sustainable development, biocomposites, and additive manufacturing, the surface defects in large-scale 3D-printing are put in relation to the industry-specific requirements placed on public furnishings. The potentials for the biocomposite to satisfy these demands are assessed using the four actions steps of material driven design. This includes hands-on exploration of several post-processing methods to minimize the material’s distinctive surface roughness. The most effective surface treatment, a combination of subtractive and additive processing, is subsequently applied in a product development phase to exemplify the feasibility of these methods in the context of furniture. This resulted in a design concept which, although a time-consuming process, proves the possibility of post-processing to influence the ability of the material to meet the requirements for public use. The increased material utility achieved in this study should, however, be considered relative to the economic and ecological consequenses associated with biocomposite processing.

Additive manufacturing has become a very popular and well mentioned technique in recent years. The technique, where 3 dimensional (3D) printing is included, creates opportunities to develop new designs and processing systems. As a research institute within the forest based processes and products, Innventia AB has an idea of combining 3D printing with cellulose. The addition of cellulose will increase the proportion of renewable raw material contributing to more sustainable products. However, when cellulose is added the composition of the filaments changes. The main aim for the project is to devise methodologies to improve properties of composite filaments used for 3D printing. Filament in 3D printing refers to a thread-like object made of different materials, such as PLA and ABS, that is used for printing processes. A literature study was combined with an extensive experimental study including extrusion, 3D printing and a new technique that was tested including 3D scanning for comparing the printed models with each other. The extruding material consisted of polypropylene and cellulose at different ratios, and filaments were produced for 3D printing. The important parameters for extruding the material in question was recorded. Because the commingled material (PPC) was in limited amount, UPM Formi granulates, consisting of the same substances, was used first in both the extrusion and printing process. Pure polypropylene filaments were also created in order to strengthen the fact that polypropylene is dimensional unstable and by the addition of cellulose, the dimensional instability will decrease. After producing filaments, simple 3D models were designed and printed using a 3D printing machine from Ultimaker. Before starting to print, the 3D model needed to be translated into layer-by-layer data with a software named Cura. Many parameters were vital during printing with pure polypropylene, UPM and PPC. These parameters were varied during the attempts and marked down for later studies. With the new technique, in which 3D scanning was included, the 3D printed models were compared with the original model in Cura in order to overlook the deformation and shape difference. The 3D scanner used was from Matter and Form. Photographs of the printed models, results from the 3D scanner, and screenshots on the model in Cura were meshed together, in different angles, using a free application named PicsArt. The result and conclusion obtained from all three parts of the experimental study was that polypropylene’s dimensional stability was improved after the addition of cellulose, and the 3D printed models’ deformation greatly decreased. However, the brittleness increased with the increased ratio of cellulose in the filaments and 3D models. / Additiv tillverkning har på den senare tiden blivit en mycket populär och omtalad teknik. Tekniken, där tredimensionell (3D) utskrivning ingår, ger möjligheter att skapa ny design och framställningstekniker. Som ett forskningsinstitut inom massa- och pappersindustrin har Innventia AB en ny idé om att kombinera 3D-utskrivning med cellulosa. Detta för att höja andelen förnybar råvara som leder till mer hållbara produkter. Dock kommer filamentens sammansättning vid tillsättning av cellulosa att ändras. Det främsta syftet med detta projekt är att hitta metoder för att förbättra egenskaperna hos de kompositfilament som används för 3D-utskrifter. Filament inom 3D-utskrivning är det trådlika objektet gjort av olika material, såsom PLA och ABS, som används vid utskrivningsprocessen. En enkel litteraturstudie kombinerades med en experimentell studie. Det experimentella arbetet var i fokus i detta projekt som omfattade extrudering, 3D-utskrivning samt en ny teknik som prövades, där 3D-scanning ingick, för att jämföra de utskrivna modellerna med varandra. Extruderingsmaterialet bestod av polypropen och cellulosa av olika halter, och av detta material tillverkades filament för 3D-utskrivning. De viktiga parametrarna för extrudering med det önskade materialet antecknades. Eftersom mängden cominglat material (PPC) var begränsat, användes först UPM Formi granuler, som består av samma substanser som i PPC, i både extruderingen och utskrivningen. Filament av ren polypropen tillverkades också för att stärka det faktum att polypropen är dimensionellt instabil. Genom att tillsätta cellulosa minskades dimensionsinstabiliteten. Efter att filamenten hade tillverkats, designades enkla 3D-modeller för utskrivning med en 3D-utskrivare från Ultimaker. Innan utskrivningen kunde börja behövde 3D-modellen bli översatt till lager-på-lager-data med hjälp av en programvara vid namn Cura. Många parametrar är viktiga vid utskrivning med ren polypropen, UPM samt PPC. Temperatur och hastighet varierades för de olika försöken och antecknades för senare studier.Med den nya tekniken, där 3D-scanning ingår, jämfördes de utskrivna 3D-modellerna med originalmodellen i Cura för att se över deformationen och formskillnaden. Den 3D-scanner som användes kom från Matter and Form. Fotografier på de utskrivna modellerna, resultaten från 3D-scannern och bilder på modellerna i Cura sammanfogades i olika vinklar med hjälp av ett gratisprogram som heter PicsArt. Det resultat som erhölls och den slutsats som kunde dras utifrån alla tre delarna av den experimentella studien var att polypropens dimensionsinstabilitet minskades efter tillsatsen av cellulosa, och att de 3D-utskrivna modellernas deformation minskade kraftigt. Skörheten ökade ju högre halt cellulosa som filamenten och de utskrivna modellerna innehöll.

Additive manufacturing (AM) is identified as one of the best techniques in manufacturing components addressing most of the current challenges including material scarcity, design complexity, material compatibility, etc. Stainless steel 316L is one of the promising material candidates in AM due to its extraordinary properties that are useful in a wide variety of industries. Tailoring desired properties locally is heavily investigated in metal AM. This project focuses on investigating the plastic behavior of additively manufactured SS 316L parts printed using laser powder bed fusion (LPBF) specifically to have a strong crystal orientation towards the direction of loading. Parts were printed to have (100), (110), and fiber texture perpendicular to the tensile axis by changing the laser scanning direction. In-situ tensile tests were carried out in a Scanning Electron Microscope (SEM) acquiring electron backscatter diffraction (EBSD) data from the specimen at several strain levels. Schmid Factor (SF) maps, Kernel Average Misorientation (KAM) maps, and Grain orientation spread (GOS) maps were generated using EBSD data. Micromechanisms in plastic deformation of these highly textured AM parts were analyzed based on the crystal orientation and the microstructure. When the influence of crystallographic texture on the micromechanisms of plastic deformation was observed, it was confirmed that a significant difference is present in tensile properties directed with the crystal orientation. During plastic deformation, the crystals were heavily rotated to accommodate slip formations. The slips that are generated at the grains with fiber texture are restricted by the grain boundaries and therefore, showed a higher yield strength. The (100) texture was less prone to plastic deformation. The grains with (110) crystal orientation proved a higher ductility with a perfect slip starting at the grains with higher SFs and showed {111} <110> slip systems.

Additive manufacturing (AM) is used to create geometries otherwise impossible to machine. Topology optimization, microstructural texture control, and the use of lattices could be created through AM to increase performance of systems. Currently research focuses on solution aging of printed 17-4 PH, while other heat treatments are not as heavily studied. This study identifies different heat treatments applied to additively manufactured 17-4 precipitation hardened (PH) and the effects on mechanical properties. This study used quasi-static tension, quasi-static compression, and Charpy V-notch testing to analyze the effects of heat treatment as well as the effectiveness of additive manufacturing compared to traditional machining for wrought materials. Data during testing was taken with digital image correlation to identify changes in local strain. The effectiveness of heat treatment was demonstrated in this study and can be used to estimate performance on additively produced 17-4 PH.

Wire-arc additive manufacturing (WAAM) is becoming increasingly common for large scale additive manufacturing (AM) applications because of its high deposition rate (2-3 kg/hr.). The rapid temperature changes and subsequent evolution of mechanical properties during AM can lead to large distortion and residual stresses. Finite element modeling of the AM process shows promise to minimize part distortion and residual stresses through improved path planning and process parameter optimization. However, accurate material properties of M250 before and after heat treatment are needed to properly characterize the property evolution from annealed to AM, to aged. Due to limited data on annealed M250, this research presents the mechanical response of solution annealed M250 maraging steel. Testing at temperatures up to 900 degrees Celsius and strain rates from quasi-static to 1 s-1 was performed to provide more representative mechanical properties for AM parts and provide a correlation between AM, aged, and annealed M250 maraging steel.

Selective laser melting of nitrogen gas atomized 17-4PH stainless results in up to 50% lower yield strength and 600% higher elongation compared to traditionally processed, wrought 17-4PH. This drastic difference in mechanical properties is commonly attributed to the presence of high volume fractions of retained austenite within the as-built microstructure. The factors leading to the increased level of retained austenite have not been clarified in the literature. Furthermore, the amount of retained austenite reported within published literature vary widely, even with the use of identical process parameters. Manufacturers of selective laser melting systems state that solution annealing and precipitation hardening will achieve traditional mechanical properties, thereby removing all retained austenite. Once again, it is not clear, how the recommended solution and precipitation treatments lead to the desired changes in microstructure. The research within this thesis establishes that there is up to 0.12wt% higher nitrogen content within additively manufactured 17-4PH, compared to traditionally manufactured 17-4PH, as a result of the powder atomization process. The increased nitrogen is able to stabilize the austenitic phase by reducing the Ms temperature below ambient temperatures. Fertiscope bulk phase analysis demonstrates that the processing atmosphere during selective laser melting cannot alter the fraction of retained austenite in the as-built material. The depression of the Ms temperature in the printed parts is confirmed by dilatometry. Due to the TRIP phenomenon, during sample preparation, it was found that the austenite would transform to 80% martensite at the surface. This transformation will greatly impact the phases detected when x-ray diffraction is used for analysis, leading to a wide variety of reported retained austenite values within literature. A mechanism based on the precipitation of nitrides during solution-treatment has been proposed to explain how heat-treatment of the printed parts can lead to a martensitic microstructure with comparable mechanical properties to those of wrought alloys. / Thesis / Master of Applied Science (MASc) / 17-4PH stainless steel is a martensitic alloy, that can be precipitation hardened when used in traditional manufacturing processes. Within a selective laser melting process, it will exhibit up to 50% lower yield strength and 600% higher elongation. This behaviour is caused by retained austenite, which is stabilized by the introduction of nitrogen during the powder atomization process. As a result, the alloy exhibits transformation induced plasticity. Existing literature states the alloy’s microstructure can be controlled by altering the selective laser melting process atmosphere or using heat treatment to achieve traditional mechanical properties. However, the production and preparation of samples generates a surface transformation which was misinterpreted as a complete bulk transformation. Therefore, the change in microstructure from altering the process atmosphere is only detectable through surface analytical techniques. It is proposed that the rapid cooling rates of SLM form a non-equilibrium state, keeping nitrogen in solution. Subsequent heat treatment allows the formation of nitrides resulting in the Ms being brought above room temperature.

The information contained in this thesis explores ways to develop a habitat for human settlement on Mars. Currently, most designs for living on Mars focus primarily on survival and emphasize the technological aspects necessary for sustaining life. However, there is a lack of holistic consideration for what life on Mars would entail beyond mere survival. These existing designs are understandably geared towards astronauts who will spend only a few months on Mars. In contrast, this project is dedicated to envisioning the future of Mars settlement, aiming to support astronauts who intend to permanently live and establish communities on Mars, ultimately transforming them into Martians. The project adopts a human-centric approach by integrating biophilic design principles to enhance the well-being of future Martian inhabitants. It seeks to address potential psychological challenges that settlers on Mars may encounter, offering innovative solutions rooted in biophilia. This approach aims to create environments that foster connection with nature, promote mental health, and support overall quality of life for individuals living on Mars. Humans have evolved over millions of years to thrive on Earth, and many of our primal instincts are deeply rooted in our hunter-gatherer ancestry. Transitioning humans to live on another planet would uproot them from their natural environment, potentially depriving them of these primal instincts and causing psychological challenges. (Szocik, n.d.) This project aims to address these issues through architectural solutions. By designing habitats that consider and accommodate our innate instincts and connections to nature, we can mitigate the psychological impacts of living on a different planet. The goal is to create environments on Mars that resonate with our evolutionary heritage, fostering psychological well-being and adaptation in extra-terrestrial settlements. / Master of Architecture / This thesis looks at how to create a habitat for humans to live on Mars. Right now, most designs focus mainly on survival and the technology needed to sustain life. Most don't really consider what everyday life would be like beyond just staying alive. Most current designs are for astronauts who will only be on Mars for a few months. This project, however, imagines a future where people live on Mars permanently and form communities, essentially becoming Martians. The project uses a design method that focuses on human needs at a subconscious and psychological level. It incorporates biophilic design principles, which emphasize our connection to nature, to improve the well-being of future Martian inhabitants. This approach aims to address psychological challenges that settlers on Mars might face, offering innovative solutions based on biophilia. The goal is to create environments that foster a connection with nature, promote mental health, and support a good quality of life. Humans have evolved over millions of years to live on Earth, and many of our basic instincts are tied to our hunter-gatherer ancestors. Moving to another planet could take us away from our natural environment and cause psychological challenges. This project aims to tackle these issues through thoughtful architectural design. By creating habitats that consider our natural instincts and connections to nature, we can reduce the psychological impacts of living on Mars. The goal is to design environments that align with our evolutionary background, helping people adapt and thrive in extra-terrestrial settlements.

Additive friction stir deposition (AFSD) is a solid-state additive manufacturing (AM) technique that breaks down large constituent particles into more refined and uniformly disturbed microstructure. AFSD was used to print Al-Ce alloys. Current commercial Al-alloys upon elevated temperatures go through dissolution and coarsening of strengthening precipitates causing mechanical degradation of these alloys. Al-Ce alloys do not have this issue as cerium's low solubility restricts dissolution into the aluminum matrix at elevated temperatures, thus giving great thermal stability to the microstructure. Al-Ce alloys lack solid solubility that affects the solid solution strengthening and precipitation strengthening. Al-Ce alloys have limitation at room temperature as they can only reach a maximum of ~65 MPa yield strength. Elements like magnesium have been added to alloy to enable solid solution strengthening, and scandium to enable precipitation strengthening to improve strength before going through the AFSD process. By adding new elements to the Al-Ce alloys, an increase in the yield strength from ~60 MPa to ~200 MPa was achieved before AFSD. The casted alloys form coarse particles that reach 300 µm in size; resulting in stress concentration that causes material fracture before necking, giving >10% ductility. AFSD breaks down these coarse particles to increase strength and ductility increases. The particles were broken down to >20 µm which increased the ductility to 10%. The results of this research shows that Al-Ce alloys are able to reach commercial aluminum alloy mechanical standards of 400 MPa ultimate tensile strength and 10% ductility at room temperature for aerospace applications.

Nanomaterials are becoming increasingly prevalent in final use products as we continue to improve our understanding of their structure and properties and optimize their processing. The useful applications for these materials extend from new drug delivery systems to improved materials for various transport industries and many more. Nanoscale materials which are commonly used include but are not limited to carbon nanotubes, graphene, silica, nanoclays, and cellulose nanocrystals. The literature presented herein aims to investigate structure-process-property relationships of cellulose nanocrystal (CNC) polymer composites. These CNC nanocomposites are unique in that they provide a dynamic mechanical response when exposed to H2O. Currently, these nanocomposite systems are most commonly solvent cast into their final geometry. In order to enable the use of these materials in more commercial processing methods such as extrusion, we must understand their inherent structure-process-property relationships. To do this, we first characterize the influence of temperature and shear orientation on the unique mechanical adaptive response. Next, the melt processability of the nanocomposite was characterized using material extrusion (MatEx) additive manufacturing (AM). Additionally, the diffusion behavior of water within the film, which controls the dynamic mechanical response, was probed to better predict the concentration dependent behavior. Finally, a literature review is presented which outlines the state of the art for melt extrusion AM of fiber filled polymer composite materials and provides insight into how we can further improve mechanical properties through further addition of composite filler materials. The initial focus of the dissertation is on the influence of melt processing CNC thermoplastic urethane (TPU) composites and the resulting impact on the mechanical adaptive response. Dynamic mechanical analysis (DMA) fitted with a submersion clamp was used to measure the mechanical softening of the composite while submerged in water. Small angle x-ray scattering (SAXS) and polarized raman spectroscopy were used to qualify the orientation of the various CNC/TPU composite samples. The results of the orientation measurements show that solvent casting the films orient CNCs into a mostly random state and melt extrusion induces some degree of uniaxial orientation. The DMA results indicate that at the processing conditions tested, the uniaxial orientation and thermal exposure from the melt processing do not significantly impact the mechanical responsiveness of the material. The next objective of this work was to expand upon the aforementioned learnings and determine the CNC composite material processability using MatEx. The ability to process mechanically dynamic CNC/TPU composites with a selective deposition process capable of generating complex geometries may enable new functionality and design freedom. To realize this potential, a two factor (extrusion temperature and extrusion speed) three level (240, 250 and 260 ℃/ 600, 1100 and 1600 mm/min) design of experiments (DOE) was utilized. The resulting printed parts were characterized by DMA to determine their respective mechanical adaptivity. Processing conditions did prove to have a significant impact on the mechanical adaptivity of the printed part. A correlation between applied energy and mechanical adaptivity demonstrates how increasing residence time and temperature can reduce mechanical performance. The shape fixity of the printed parts was calculated to be 80.4% and shape recovery was 44.2%. A 3D prototype part was also produced to demonstrate the unique properties of this material. Although the understanding of the melt processing behavior of these CNC composites had been improved, a stronger understanding of the moisture diffusion behavior within the composite is required to fully realize and control their potential. Therefore, a study was undertaken to capture the diffusion behavior and correlate it to the mechanical responsive mechanism. To do this, a thermogravimetric sorption analysis (TGA-SA) instrument was used to monitor the mass uptake as a function of time exposed to a humid environment. These data were then compared to DMA data collected for the same samples exposed to a similar degree of humidity. All studies were conducted as a function of concentration in order to better elucidate the influence that percolating network structures may have on the resultant properties. Interestingly, the results show how increasing addition of CNCs results in a decrease in the rate of diffusivity, which is counter to what has been commonly hypothesized. It is hypothesized that increasing CNC content restricts the mobility of surrounding amorphous matrix material, thus increasing the resistance for diffusion of a water molecule. However, the rate of mechanical adaptation was found to increase with increasing CNC content, which is believed to be a result of the increased connectivity, enabling further transport of water molecules. / Doctor of Philosophy / Nanomaterials are becoming increasingly prevalent in final use products as we continue to improve our understanding of their structure and properties and optimize their processing. The useful applications for these materials extend from new drug delivery systems to improved materials for various transport industries and many more. The literature presented herein aims to investigate structure-process-property relationships of cellulose nanocrystal (CNC) polymer composites. These CNC nanocomposites are unique in that they provide a unique mechanical response when exposed to water. In order to enable the use of these materials in more commercial processing methods, we must understand their inherent structure-process-property relationships. The following documents multiple aspects of these unique composite materials which enables their commercial viability and scientific versatility.

Vat photopolymerization's (VP) use in large-scale industrial manufacturing is limited due to poor scalability, and limited catalogue of engineering polymers. The challenges in scalability stem from an inherent process paradox: the feature resolution, part size, and manufacturing throughput cannot be maximized simultaneously in standard VP platforms. In addition, VP's inability to process viscous and high-molecular weight engineering polymers limits the VP materials catalogue. To address these limitations, the research presented in this work was conducted in two stages: (1) Development and modeling of new VP platforms to address the scalability and viscosity challenges, and (2) Investigating the influence of using the new processes on the cured polymer network structure and mechanical properties. First, a scanning mask projection vat photopolymerization (S-MPVP) system was developed to address the scalability limitations in VP systems. The process paradox was resolved by scanning the mask projection device across the resin surface while simultaneously projecting the layer as a movie. Using actual projected pixel irradiance distribution, a process model was developed to capture the interaction between projected pixels and the resin, and predict the resulting cure profile with an error of 2.9%. The S-MPVP model was then extended for processing heterogeneous UV scattering resins (i.e. UV curable polymer colloids). Using computer vision, the scattering of incident UV radiation on the resin surface was successfully captured and used to predict scattering-compensated printing parameters (bitmap pattern, exposure time , scanning speed). The developed reverse-curing model was used to successfully fabricate complex features using photocurable SBR latex with XY errors < 1.3%. To address the low manufacturing throughput of VP systems, a recoat-less, volumetric curing VP system that fabricates parts by continuously irradiating the resin surface with a movie composed of different gray-scaled bitmap images ( Free-surface movie mask projection (FreeMMaP)) was developed. The effect of cumulative exposure on the cure profile (X,Y,Z dimensions) was investigated and used to develop an iterative gray-scaling algorithm that generated a combination of gray-scaled bitmap images and exposure times that result in accurate volumetric curing (errors in XY plane and Z axis < 5% and 3% respectively). Results of this work demonstrate that the elimination of the recoating process increased manufacturing speed by 8.05 times and enabled high-resolution fabrication with highly viscous resins or soft gels. Then, highly viscous resins were made processible in VP systems by using elevated processing temperatures to lower resin viscosity. New characterization techniques were developed to determine the threshold printing temperature and time that prevented the onset of thermally-induced polymerization. The effect of printing temperature on curing, cured polymer structure, cured polymer mechanical properties, and printable aspect ratio was also investigated using diacrylate and dimethacrylate resins. Results of this investigation revealed increasing printing temperature resulted in improvements in crosslink density, tensile strength, and printability. However, presence of hydroxl groups on the resin backbone caused deterioration of crosslink density, mechanical properties, and curing properties at elevated printing temperatures. Finally, the lack of a systematic, constraint based approach to resin design was bridged by using the results of earlier process-structure-property explorations to create an intuitive framework for resin screening and design. Key screening parameters (such as UV absorptivity, plateau storage modulus) and design parameters (such as photoinitiator concentration, polymer concentration, UV blocker concentration) were identified and the methods to optimize them to meet the desired printability metrics were demonstrated using case studies. Most work in vat photopolymerization either deal with materials development or process development and modeling. This dissertation is placed at the intersection of process development and materials development, thus giving it an unique perspective for exploring the inter-dependency of machine and material. The process models, machines and techniques used in this work to make a material printable will serve as a guide for chemists and engineers working on the next generation of vat photopolymerization machines and materials. / Doctor of Philosophy / Vat Photopolymerization (VP) is a polymer-based additive manufacturing platform that uses UV light to cure a photo-sensitive polymer into the desired shape. While parts fabricated via VP exhibit excellent surface finish and high-feature resolution, their use for commercial manufacturing is limited because of its poor scalability for large-scale manufacturing and limited selection of engineering materials. This work focuses on the development of new VP platforms, process models and the investigation of the process-structure-property relationships to mitigate these limitations and enable fabrication of performance polymers. The first section of the dissertation presents the development of two new VP platforms to address the limitations in scalability. The Scanning Mask Projection Vat Photopolymerization (S-MPVP)) was developed to fabricate large area parts with high-resolution features and the Free-surface movie mask projection (FreeMMaP) VP platform was developed to enable high-speed, recoat-less, volumetric fabrication of 3D objects. Computer-vision based models were developed to investigate the influence of these new processes on the resultant cure shape and dimensional accuracy. Process models that can: (1) predict the cure profile for given input printing parameters (error < 3%), (2) predict the printing parameters (exposure time, bitmap gray-scaling) required for accurate part fabrication in homogeneous and UV scattering resins, and (3) generate gray-scaled bitmap images that can induce volumetric curing inside the resin (dimensional accuracy of 97% Z axis, 95% XY axis), were designed and demonstrated successfully. In the second portion of this work, the use of high-temperature VP to enable processing of high-viscosity resins and expansion of materials catalogue is presented. New methods to characterize the resin's thermal stability are developed. Techniques to determine the printing temperature and time that will prevent the occurrence of thermally-induced polymerization are demonstrated. Parts were fabricated at different printing temperatures and the influence of printing temperature on the resultant mechanical properties and polymer network structure was studied. Results of this work indicate that elevated printing temperature can be used to alter the final mechanical properties of the printed part and improve the printability of the high-resolution, slender features. Finally, the results of the process-structure-property investigations conducted in this work were used to guide the development of a resin design framework that highlights the parameters, metrics, and methods required to (1) identify printable resin formulations, and (2) tune printable formulations for optimal photocuring. Elements of this framework were then combined into an intuitive flowchart to serve as a design tool for chemists and engineers.