Ce travail concerne la modification de surface de nanoparticules magnétiques (MNP) par des copolymères réactifs renfermant des cycles azlactone, aux fins de l’élaboration de nano-supports destinés à l’immobilisation de biomolécules. Trois stratégies basées sur des techniques de polymérisation radicalaire contrôlée ont été mises en œuvre.Dans la première, un copolymère poly(méthacrylate de poly(éthylène glycol)-stat-2-vinyl-4,4-diméthylazlactone) (poly(PEGMA-stat-VDM)) a été préparé par polymérisation radicalaire par transfert d’atome (ATRP) selon la technique « grafting from » à partir des MNP et utilisé pour la bioconjugaison de thymine peptide nucleic acid (PNA). La présence de l’écorce polymère et l’immobilisation du PNA ont été confirmées par différentes techniques complémentaires (FTIR, VSM).La deuxième stratégie est basée sur l’élaboration de MNP greffées pour la bioconjugaison de l’acide folique, via l’ARTP du PEGMA et de la VDM. L’analyse par microscopie électronique à transmission (TEM) a montré qu’après bioconjugaison les MNP possèdent une très bonne aptitude à la dispersion en milieu aqueux.La troisième stratégie met en œuvre la technique «grafting onto » de copolymères poly(oxyde d’éthylène)-bloc-poly(2-vinyl-4,4-dimethylazlactone) (PEO-b-PVDM) pour la préparation de nanosupports magnétiques recyclables. Des copolymères à blocs PEO-b-PVDM ont été préparés par la technique de polymérisation RAFT puis greffés sur des MNP fonctionnalisées amino-silane. Les analyses en TEM et par spectroscopie de corrélation de photons ont révélé l’aptitude à la dispersion aqueuse et à la formation de nanoclusters. Les clusters ainsi obtenus ont été utilisés en tant que nanosupports magnétiques recyclables pour l’adsorption d’anticorps. / We herein report the surface modification of magnetite nanoparticle (MNP) with copolymers containing active azlactone rings via a grafting ‘from’ and grafting ‘onto’ controlled radical polymerization (CRP) for use as a nano-solid support for immobilization with biomolecules. Three different approaches were presented as following. First, synthesis of poly(poly(ethylene glycol) methyl ether methacrylate-stat-2-vinyl-4,4-dimethylazlactone) (PEGMA-stat-VDM)-grafted MNP via a grafting ‘from’ atom transfer radical polymerization (ATRP) and its application as a platform for conjugating thymine peptide nucleic acid (PNA) monomer were presented. The presence of polymeric shell and the immobilization of thymine PNA on MNP core were confirmed by fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometry (VSM) techniques. The second strategy is based on the synthesis of MNP grafted with PEGMA and VDM via ATRP for conjugation with folic acid (FA). The existence of PEGMA and VDM in the structure was characterized by FTIR, TGA and VSM. After the FA conjugation, Transmission Electron Microscopy (TEM) results indicated that the FA-conjugated MNP having high VDM content exhibited good dispersibility in water.Third, the synthesis of MNP grafted with poly(ethylene oxide)-block-poly(2-vinyl-4,4-dimethylazlactone) (PEO-b-PVDM) block copolymer via a grafting ‘onto’ strategy and its application as recyclable magnetic nano-support for adsorption with antibody were studied. PEO-b-PVDM diblock copolymers were first synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization and then grafted onto amino-functionalized MNP. TEM images and photo correlation spectroscopy (PCS) indicated an improvement in the particle dispersibility in water after coating with the copolymers. The nanoclusters with PEO-b-PVDM copolymer coating were used as recyclable magnetic nano-supports for adsorption with antibody.

The synthesis of dipyridyl functionalized polysulfones with improved hydrophilicity, enhanced membrane morphology and excellent ATRP polymeric ligand properties was conducted by the following method: (a) the formation of lithiated polysulfone from unmodified polysulfone and the subsequent reaction with 2,2'-vinylidenedipyridine in tetrahydrofuran at -78 oC under argon atmosphere to afford the corresponding dipyridyl functionalized polysulfone. The stoichiometry of the reaction affects the degree of functionalization of the product. When equimolar amounts of 2,2'-vinylidenedipyridine are added to the lithiated polysulfone, the degree of functionalization obtained was 45%. However, the addition of 10% and 20% molar excess of 2,2'-vinylidenedipyridine to the corresponding lithiated polysulfone produced dipyridyl functionalized polysulfones with degrees of functionalization of 80% and 95%, respectively; and (b) the membranes obtained from unmodified polysulfone as well as dipyridyl functionalized polysulfones were characterized by atomic force microscopy, scanning electron microscopy, pure water permeation measurements and contact angle measurements. Amine chain end functionalized polystyrene and poly(methyl methacrylate) were prepared by Atom Transfer Radical Polymerization (ATRP) methods as follows: (a) •-Aminophenyl functionalized polystyrene was prepared in quantitative yields by ATRP methods using a new primary amine functionalized initiator adduct, formed in situ by the reaction of 1-(4-aminophenyl)-1-phenylethylene and (1-bromoethyl)benzene in the presence of copper (I) bromide/2,2'-bipyridyl as catalyst in diethyl ether at 110 oC, for the polymerization of styrene.(b) New •-bis(aminophenyl) and •,ω-tetrakis(aminophenyl) functionalized polymers were prepared in quantitative yields by the ATRP method using the following synthetic strategy: (i) the initiation of styrene polymerization with a new primary diamine functionalized initiator adduct, generated in situ by the reaction of stoichiometric amounts of 1,1-bis(4-aminophenyl)ethylene with (1-bromoethyl)benzene in the presence of copper (I) bromide/2,2'-bipyridyl as catalyst, afforded •-bis(aminophenyl) functionalized polystyrene; and (ii) •-bis(aminophenyl) functionalized poly(methyl methacrylate) was prepared by the ATRP method using the primary diamine functionalized initiator adduct as initiator for methyl methacrylate polymerization; and (iii) well defined •,ω-tetrakis(aminophenyl) functionalized polystyrene was prepared by the post ATRP chain end modification reaction of •-bis(aminophenyl) functionalized polystyrene with 1,1-bis(4-aminophenyl)-ethylene at the completion of the polymerization reaction. (c) Similarly, •-bis(4-dimethylaminophenyl) functionalized polystyrene was prepared by using a new tertiary diamine functionalized initiator adduct, formed in situ by treatment of equimolar amounts of 1,1-bis[(4-dimethylamino)phenyl]-ethylene with (1-bromoethyl)benzene in the presence of copper (I) bromide/2,2'-bipyridyl as the catalyst in diphenyl ether at 110 oC for the initiation of styrene polymerization by the ATRP method. Furthermore, the ATRP of methyl methacrylate, initiated by the new tertiary diamine functionalized initiator adduct, produced •-bis(4-dimethylaminophenyl) functionalized poly(methyl methacrylate). In addition, •,ω-tetrakis(4-dimethylaminophenyl) functionalized polystyrene was synthesized via a post ATRP chain end modification reaction of •-bis(4-dimethylaminophenyl) functionalized polystyrene with equimolar amounts of 1,1-bis[(4-dimethylamino)phenyl]ethylene at the completion of the polymerization process. vi Quantitative yields of the different amine functionalized polymers with predictable number average molecular weights (Mn = 1.3 x 103 – 16.4 x103 g/mol), narrow molecular weight distributions (Mw/Mn = 1.03 – 1.29) and controlled chain end functionality were obtained. Polymerization kinetics data was employed to determine the controlled/living character of each ATRP reaction leading to the formation of the different amine chain end functionalized polymers. The polymerization processes were monitored by gas chromatographic analyses. Polymerization kinetics measurements for all reactions show that the polymerizations follow first order rate kinetics with respect to monomer consumption. The number average molecular weight of the amine functionalized polymers increases linearly with percentage monomer conversion and polymers with narrow molecular weight distribution were obtained. The ATRP of styrene, catalyzed by a novel dipyridyl functionalized polysulfone/CuBr supported catalyst system, afforded well defined polystyrene with predictable number average molecular weight and narrow molecular weight distribution in a controlled/living free radical polymerization process. The substituted 1,1-diphenylethylene initiator precursor derivatives and the functionalized polymers were characterized by nuclear magnetic resonance spectrometry, fourier transform infrared spectroscopy, thin layer chromatography, column chromatography, size exclusion chromatography, non-aqueous titrations, differential scanning calorimetry and thermogravimetrical analysis. / Chemistry / M. Sc. (Chemistry)

L'objectif de ce travail fut d'intensifier des procédés de polymérisation radicalaire par transfert d'atomes (ATRP) du méthacrylate de 2-(dimétylamino)éthyle (DMAEAMA) au moyen de technologies de microréaction (microréacteurs, micromélangeurs) et de paramètres de procédé (géométrie du réacteur, température, pression ... ).L'impact du prémélange sur les caractéristiques d'un copolymère statistique du DMAEMA et du méthacrylate de benzyle synthétisé dans des microréacteurs hélicoïdaux (CT) fut étudié en utilisant des principes différents de micromélange: bilamination, multilamination interdigitale (!MM) et jet d'impact. Des caractéristiques bien mieux contrôlées ont été obtenues avec !'IMM et l'intensification du procédé (Pl) a été clairement démontrée encomparaison d'un réacteur fermé ; en effet des masses molaires et conversions plus élevées ainsi que de plus faibles indices de polymolécularité (PDI) ont été obtenus pour des temps de passage inférieurs. Pour la production de PMADAME linéaire, le PI a également été réalisé par augmentation de la température et de la pression (jusqu'à 1 OO bars). Toutefois de trop hautes températures se sont avérées préjudiciables notamment pour de longs temps de passage. L'effet de l'augmentation du taux de cisaillement (via la longueur du réacteur) ne fut bénéfique qu'en régime dilué à un stade précoce de la réaction lorsque les masses molaires sont encore faibles. Comparés aux CT, un mélange interne favorisé par une technique d'inversion de flux s'est révélé être une stratégie très efficace pour réduire davantage le PDI et obtenir des masses molaires et conversions plus élevées. Des polymères branchés synthétisés en microréacteurs à inversion de flux (CFI) par ATRP en présence d'inimère présentèrent une structure plus ramifiée soulignant ainsi la supériorité des CFI sur les CT et réacteurs fermés en termes de PDI et d'efficacité de branchement. Considérant les caractéristiques des CFI, l'augmentation d'échelle des microréacteurs fut considérée par accroissement de leur diamètre. La productivité du procédé a été augmentée d'un facteur 4 tout en gardant un bon contrôle sur les caractéristiques macromoléculaires. Ainsi fut-il démontré que l'inversion de flux est un moyen très efficace pour contrebalancer l'effet négatif d'une augmentation du diamètre du microréacteur. / The aim of this work was to intensify Atom Transfer Radical polymerization (ATRP) processes for the production of DMAEMA-based (co)polymers by relying on microreaction technology tools (microreactor, micromixers) and process parameters (reactor geometry, temperature, pressure ... ). Impact of premixing on macromolecular characteristics of P(DMAEMA-co-BzMA) synthesized in coiled tube (CT) microreactors was studied using different micromixing principles: bilamination, interdigital multilamination (IMM) and impact jet.Better controlled characteristics were obtained with !MM and process intensification (PI) was clearly demonstrated in comparison with batch mode as higher molecular weights, increased monomer conversions and lower polydispersity indices (PDI) were obtained for lower residence times. For the production of linear PDAEMA, PI was also achieved by application of elevated temperature and pressure (up to 100 bars). However, high temperature was found to be detrimental for long residence times. Effect of increased shear rate (i.e. reactor length) was found only beneficial in dilute regime at the early stage of the polymerization reaction when molecular weights are low. ln comparison with CT reactors, internal mixing promoted by flow inversion technique was found to be quite an effective strategy to reduce further PDI and obtain higher molecular weights and monomer conversions. Branched polymers synthesized by self condensing vinyl copolymerization (SCVCP) adapted to ATRP in tubular coil flow inverter (CFI) microreactors exhibited higher branched structure highlighting the superiority of CFI microreactor over CT and batch reactors in terms of PD! and branching efficiency. Finally, considering such features of CFI, attempt was made to scale-up microreactors by increasing their diameter. lt was found that process throughput can be increased by more than a factor of 4 while keeping a good control over macromolecular characteristics. Thus itwas demonstrated that flow inversion is quite effective to counter balance the detrimental effect of an increase in microreactor diameter.

In the frame of this thesis different calix[4]resorcin- and calix[4]pyrogallolarene derivatives were used as platform for the synthesis of novel star polymers and dendritic structures. The objectives of this work can be portrayed under the following points: First: Synthesis and modification of calix[4]resorcin- and calix[4]pyrogallolarenes with a varying number and varying type of functional sites and their precise characterization by modern NMR techniques and single crystal X-ray diffraction. Second: Synthesis of well-defined star polymers and dendrimers with different number of arms and accordingly dendrons, based on calix[4]resorcin- and calix[4]pyrogallolarenes, via convenient polymerization and generation growth reactions and analysis of the obtained products by different methods (MALDI-TOF-MS, SEC-RI and SEC-MALLS, NMR).

Controlled radical polymerization (CRP) can be viewed as the middle ground between living anionic polymerization (LAP) and conventional free radical polymerization (FRP). It combines the precise control over polymer structure offered by LAP, under a tolerant reaction condition similar to FRP. One of the most studied CRP is atom transfer radical polymerization (ATRP), with over 10,000 papers published since its introduction in 1995. Despite the numerous studies, knowledge on its fundamental mechanism is still lacking, as evident from the lack of expression for full MWD and polydispersity that account for termination reaction. Since termination is unavoidable in ATRP, the existing expressions give inaccurate predictions as dead chains accumulate. In this study, we derived expressions for full MWD at low conversion and for polydispersity. These expressions allow us to quantify and gain better understanding on the contribution of termination. In addition, the resulting polydispersity expression shows better agreement than the existing equation when correlated with experiment data. In addition to the aforementioned questions, there are also controversies regarding the kinetics of surface-initiated ATRP, with researchers divided into two schools of theories. We evaluated the validity of these theories by comparing their predictions to experimental trends. Both theories were found to be inadequate in explaining all the experimental observations, thus triggering an investigation of the graft density. Graft density is an important determining property for polymer brushes, yet little is known about what affects its final value. Through simulations, we investigated the effect of experiment factors on the grafting density. A decrease in the amount of deactivator is found to decrease the grafting density, which could be explained by an increase in the number of monomers added per activation cycle. This knowledge allows us to explain the conflicting experiment observations regarding the growth trends of polymer layers reported in the literatures. / Thesis / Doctor of Philosophy (PhD) / Polymer materials are used almost everywhere in our daily life from clothing to water bottle. This wide range of applications owes to the nearly infinite possible properties that polymer can possess. Different polymerization processes to synthesize polymers have their own weaknesses and strengths. Herein we investigated the fundamental mechanism of one of the currently most attractive polymerization systems, atom transfer radical polymerization (ATRP). This process allows the synthesis of polymers with precisely tailored chain microstructures, making it possible to create polymer with sophisticated properties. Using modeling approaches, we derived explicit expressions for determining chain properties, allowing detailed investigation of how various factors affect these properties. Through these investigations, we obtained better understanding on the mechanism of ATRP in solution and on surface. This knowledge is crucial in providing insight and guiding experimental designs for better control over the material properties.

Here, we report on a new temperature responsive polymer brush system with a terminal “click” functionality. Bifunctionalized poly(N-isopropylacrylamide) (PNiPAAm) with distinct functional end groups was synthesized by atom transfer radical polymerization (ATRP) and grafted to a modified silicon substrate. The presence of the active terminal alkyne functionality is validated using an azide-modified rhodamine B (N3-RhB) via copper(I) catalyzed alkyne–azide cycloaddition (CuAAC). The optical properties and swelling dynamics of an N3-RhB modified PNiPAAm brush are analyzed in dry state and in situ by VIS-spectroscopic ellipsometry (SE). The best-fit results are obtained using a Gaussian oscillator model and are confirmed by UV/VIS-spectroscopy. We observed evidence of interactions between the aromatic residues of the dye and the PNiPAAm amide groups, which significantly affect the swelling behavior of the modified polymer brush. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Η δυνατότητα να συνδυαστούν οι ιδιότητες οργανικών και ανόργανων συστατικών σε ένα μοναδικό νανοδομημένο υβριδικό υλικό αποτελεί μία σημαντική επιστημονική πρόκληση στο σχεδιασμό υλικών, τα οποία μπορούν να εμφανίζουν νέες βελτιωμένες ιδιότητες και να τύχουν προηγμένων εφαρμογών. Τα υβριδικά υλικά, γενικά, μπορούν να ταξινομηθούν σε δύο μεγάλες κατηγορίες: στην κατηγορία I (class I), όπου οι δύο φάσεις συνδυάζονται μέσω ασθενών αλληλεπιδράσεων, και στην κατηγορία II (class II), όπου οι δύο φάσεις είναι σταθερά συνδεδεμένες. Στην παρούσα εργασία διερευνήθηκε η δυνατότητα εφαρμογής νανοδομημένων υβριδικών υλικών ως ετερογενείς καταλύτες στη διεργασία παραγωγής βιοντίζελ από διαφόρων ειδών έλαια. Κατά τη διεργασία αυτή, η οποία καλείται μετεστεροποίηση ή μεθανόλυση, τριγλυκερίδια αντιδρούν με μια αλκοόλη παρουσία ισχυρού οξέος ή βάσης προς παραγωγή εστέρων και γλυκερίνης. Σε πρώτη φάση, εστιάσαμε στη σύνθεση και το χαρακτηρισμό class I και class II υβριδικών οργανικών/ανόργανων υλικών αποτελούμενων από έναν ανόργανο πυρήνα διοξειδίου του πυριτίου (silica), ο οποίος θα περιβάλλεται από πολυμερικές αλυσίδες. Έτσι, στην προσπάθεια σύνθεσης υβριδικών υλικών class I αξιοποιήθηκαν οι πιθανές αλληλεπιδράσεις καθαρών και αμινοτροποποιημένων νανοσωματιδίων διοξειδίου του πυριτίου με υδατοδιαλυτά συμπολυμερή P(SSΗ-co-MA) του στυρενοσουλφονικού οξέος (SSH), με το μηλεϊνικό οξύ (ΜΑ), τα οποία φέρουν τόσο καρβοξυλικές όσο και σουλφονικές ομάδες. Ως αποτέλεσμα του όξινου χαρακτήρα των πολυμερών, τα υβριδικά νανοσωματίδια θα μπορούσαν δυνητικά να χρησιμοποιηθούν ως όξινοι καταλύτες κατά την παραγωγή του βιοντίζελ. Στην προσπάθεια σύνθεσης class II υβριδικών υλικών αξιοποιήθηκε κυρίως ο πολυμερισμός ελευθέρων ριζών μέσω μεταφοράς ατόμου (ATRP), μονομερών όπως στυρενοσουλφονικό νάτριο (SSNa), Ν-ισοπροπυλακρυλαμίδιο (NIPAM) και 2-(διμεθυλαμινο)μεθακρυλικός αιθυλεστέρας (DMAEMA). Για την εκκίνηση του πολυμερισμού χρησιμοποιήθηκαν νανοσωματίδια silica χημικά τροποποιημένα με 3-αμινοπροπυλοτριαιθοξυσιλάνιο και ακολούθως με 2-χλωροπροπιονυλοχλωρίδιο. Εναλλακτικά, χρησιμοποιήθηκαν νανοσωματίδια silica χημικά τροποποιημένα με 3-χλωροπροπυλoτριαιθοξυσιλάνιο (ATRP πολυμερισμός), ή βινυλοτριμεθοξυσιλανιο (πολυμερισμός ελευθέρων ριζών, FRP). Ο χαρακτηρισμός των δειγμάτων κατά περίπτωση έγινε με φασματοσκοπία πυρηνικού μαγνητικού συντονισμού υδρογόνου (1H NMR), φασματοσκοπία υπερύθρου με μετασχηματισμό Fourier (FTIR), θερμοσταθμική ανάλυση (TGA) και τιτλοδότηση οξέος-βάσεως. Στο τελευταίο μέρος της εργασίας ελέγχθηκε η καταλυτική δράση κάποιων εκ των συντεθέντων υλικών στην αντίδραση μεθανόλυσης της τριοξικής γλυκερόλης, χρησιμοποιώντας την τεχνική 1H NMR. Διαπιστώθηκε πως τα αμινοτροποποιημένα νανοσωματιδία silica εμφανίζουν σημαντική καταλυτική δράση. Αντίθετα η ικανότητα των υβριδικών οργανικών/ανόργανων υλικών silica-NH2(B)/P(SSH50-co-MA50), silica-NH2(D)/P(SSH75-co-MA25), και silica-VTMS-PDMAEMA να δρουν ως όξινοι ή βασικοί καταλύτες της ίδιας αντίδρασης είναι πολύ περιορισμένη. / The possibility to combine the properties of organic and inorganic components in a unique nanostructured hybrid material is a major scientific challenge in designing novel materials exhibiting improved properties and finding advanced applications. Hybrid materials generally can be classified into two categories: class I, where the two phases are combined through weak interactions, and class II, where the two phases are covalently connected. The aim of the present study was to develop novel hybrid organic/inorganic nanomaterials, potentially applied as heterogeneous catalysts in the biodiesel production process. In this process, called transesterification or methanolysis, triglycerides from various oils react with an alcohol in the presence of a strong acid or base to produce the respective esters and glycerin. In the first part of this work, we focused on the synthesis and characterization of class I and class II hybrid organic/inorganic nanomaterials consisting of an inorganic silicon dioxide (silica) core and a polymer shell. Thus, for the class I hybrid materials we took advantage of the weak interactions between net or amino-functionalized silica nanoparticles and water-soluble P(SSH-co-MA) copolymers of styrene sulfonic acid (SSH), with maleic acid (MA), carrying both carboxyl and sulfonic groups. These hybrid nanoparticles could potentially be used as acidic catalysts in the production of biodiesel, as a consequence of the acidic nature of the polymer used. For the class II hybrid materials, we mostly applied atom transfer radical polymerization (ATRP) of monomers such as sodium styrene sulfonate (SSNa), N-isopropylacrylamide (NIPAM) and 2-(dimethylamino) ethyl methacrylate (DMAEMA). To initiate the polymerization, silica nanoparticles chemically modified with 3-aminopropyltriethoxysilane and subsequently with 2-chloropropionylchloride were used. Alternatively, we also used silica nanoparticles chemically modified with 3-chloropropyltriethoxysilane (ATRP polymerization), or vinyltrimethoxysilane (free radical polymerization, FRP). In all cases, the products were characterized through a combination of techniques, such as proton nuclear magnetic resonance spectroscopy (1H NMR), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and acid-base titration. In the latter part of this work, the catalytic activity of some materials in the methanolysis process of glycerol triacetate was investigated, using the 1H NMR technique. It was found that the aminofunctionalized silica nanoparticles exhibit significant catalytic activity, whereas the ability of the hybrid materials silica-NH2(B)/P(SSH50-co-MA50), silica-NH2(D)/P(SSH75-co-MA25) and silica-VTMS-PDMAEMA to act as acidic or basic catalysts is very limited.

No description available.

The poly(glycidyl methacrylate)-modified magnetite nanoparticles, Fe3O4-PGMA NPs, were investigated and applied in nondestructive flaw detection of polymeric materials in this research. The Fe3O4 endowed magnetic property to the materials for flaw detection while the PGMA promoted colloidal stability and prevented particle aggregation. The magnetite nanoparticles (Fe3O4 NPs) were successfully synthesized by coprecipitation and then surface-modified with PGMA to form PGMA-modified Fe3O4 NPs by both grafting-from and grafting-to approaches. For the grafting-from approach, the Fe3O4 NPs were surface-functionalized with α-bromo isobutyryl bromide (BIBB) to form BIB-modified Fe3O4 NPs (Fe3O4-BIB NPs) with covalent linkage. The resultant Fe3O4-BIB NPs were used as surface-initiators to grow PGMA by surface-initiated atom transfer radical polymerization (SI-ATRP). For the grafting-to approach, the Fe3O4 NP were surface-functionalized with (3-mercaptopropyl)triethoxysilane (MCTES) to form MCTES-modified Fe3O4 NPs (Fe3O4-MCTES NPs). The PGMA with Br-end group was pre-synthesized by ATRP and then was grafted to the surface of the Fe3O4-MCTES NPs by coupling reaction. Both bare and modified Fe3O4 NPs exhibited superparamagnetism and the existence of iron oxide in the form of Fe3O4 was confirmed. The particle size of individual Fe3O4 NPs was about 8 – 24 nm but they aggregated to form clusters. The PGMA-modified NPs formed stable dispersion in chloroform and had larger cluster sizes than the unmodified ones because of the PGMA polymer layer. However, the uniformity of the NP clusters could be improved with PGMA surface grafting. The PGMA surface layer of the grafting-from (Fe3O4-gf-PGMA) NPs was thin and dense while that of the grafting-to (Fe3O4-gt-PGMA) NPs was thick and loose. The hydrodynamic diameters (Zave) of Fe3O4-gf-PGMA NP clusters could be controlled between 176 to 643 nm, dependent on the PGMA contents and reaction conditions. During SI-ATRP, side reactions happened and caused NP aggregation as well as increase of size of NP clusters. However, the aggregation has been minimized through optimization of reaction conditions. Oppositely, Zave values of Fe3O4-gt-PGMA NPs had little variation of about 120 – 190 nm. And the PGMA content of the Fe3O4-gt-PGMA NPs was limited to 12.5% because of the spatial hindrance during grafting process. The saturation magnetization (Ms) of the unmodified Fe3O4 NPs was about 77 emu/g, while those of the grafting-from and grafting-to Fe3O4-PGMA NPs were 50 – 66 emu/g and 63 – 70 emu/g, respectively. For Fe3O4-PGMA NPs with similar Fe3O4 contents, the grafting-to NPs had slightly higher Ms than the grafting-from counterparts. In addition, the Ms of both kinds of the Fe3O4-PGMA NPs with higher Fe3O4 content (> 87%) were also higher than that of the fluidMAG-Amine, the commercially available amine-modified MNPs. Besides, both kinds of Fe3O4-PGMA NPs also had much higher Fe3O4 contents and Ms values than most of the reported PGMA-modified MNPs. The magnetic epoxy nanocomposites (MENCs) were prepared by blending the modified Fe3O4 NPs into bisphenol A diglycidyl ether (BADGE)-based epoxy system and the distributions of both kinds of the PGMA-modified NPs were much better than that of the oleic acid-modified Fe3O4 NPs. Similar to the NPs, the MENCs also exhibited superparamagnetism. By cross-section TEM observation, the grafting-to Fe3O4-PGMA NPs formed more homogeneous distributions with smaller cluster size than the grafting-from counterparts and gave higher Ms of the MENCs. Nondestructive flaw detection of surface and sub-surface defects could be successfully achieved by brightness contrast of images given through eddy current testing (ET) method, which is firstly reported. The mechanical properties of the materials were influenced very slightly when 2.5% or lower Fe3O4-gt-PGMA NPs were present while the presence of the Fe3O4-gf-PGMA NPs (1 – 2.5 %) gave mild improvement of the storage modulus and increase of the glass-rubber transition temperature(Tg) of the MENCs. Furthermore, the Fe3O4-PGMA NPs could be evenly coated onto the functionalized ultra-high molecular weight poly(ethylene) (UHMWPE) textiles. The Fe3O4-gt-PGMA NPs were coated on the textile in order to prepare NP-coated textile-reinforced composite. Preliminary result of ET measurement showed that the Fe3O4-gt-PGMA NPs coated on the textiles could visualize the structure of the textile hidden inside and their relative depth. Accordingly, the incorporation of MNPs to polymers opens a new pathway of damage-free structural health monitoring of polymeric materials.

Here, we report on a new temperature responsive polymer brush system with a terminal “click” functionality. Bifunctionalized poly(N-isopropylacrylamide) (PNiPAAm) with distinct functional end groups was synthesized by atom transfer radical polymerization (ATRP) and grafted to a modified silicon substrate. The presence of the active terminal alkyne functionality is validated using an azide-modified rhodamine B (N3-RhB) via copper(I) catalyzed alkyne–azide cycloaddition (CuAAC). The optical properties and swelling dynamics of an N3-RhB modified PNiPAAm brush are analyzed in dry state and in situ by VIS-spectroscopic ellipsometry (SE). The best-fit results are obtained using a Gaussian oscillator model and are confirmed by UV/VIS-spectroscopy. We observed evidence of interactions between the aromatic residues of the dye and the PNiPAAm amide groups, which significantly affect the swelling behavior of the modified polymer brush. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.