The present thesis is concerned to the application of first-principles self-consistent total-energy calculations within the density functional theory on different topics in materials science. Crystallographic phase-transitions under high-pressure has been study for TiO2, FeI2, Fe3O4, Ti, the heavy alkali metals Cs and Rb, and C3N4. A new high-pressure polymorph of TiO2 has been discovered, this new polymorph has an orthorhombic OI (Pbca) crystal structure, which is predicted theoretically for the pressure range 50 to 100 GPa. Also, the crystal structures of Cs and Rb metals have been studied under high compressions. Our results confirm the recent high-pressure experimental observations of new complex crystal structures for the Cs-III and Rb-III phases. Thus, it is now certain that the famous isostructural phase transition in Cs is rather a new crystallographic phase transition. The elastic properties of the new superconductor MgB2 and Al-doped MgB2 have been investigated. Values of all independent elastic constants (c11, c12, c13, c33, and c55) as well as bulk moduli in the a and c directions (Ba and Bc respectively) are predicted. Our analysis suggests that the high anisotropy of the calculated elastic moduli is a strong indication that MgB2 should be rather brittle. Al doping decreases the elastic anisotropy of MgB2 in the a and c directions, but, it will not change the brittle behaviour of the material considerably. The three most relevant battery properties, namely average voltage, energy density and specific energy, as well as the electronic structure of the Li/LixMPO4 systems, where M is either Fe, Mn, or Co have been calculated. The mixing between Fe and Mn in these materials is also examined. Our calculated values for these properties are in good agreement with recent experimental values. Further insight is gained from the electronic density of states of these materials, through which conclusions about the physical properties of the various phases are made. The electronic and magnetic properties of the dilute magnetic semiconductor Mn-doped ZnO has been calculated. We have found that for an Mn concentration of 5.6%, the ferromagnetic configuration is energetically stable in comparison to the antiferromgnetic one. A half-metallic electronic structure is calculated by the GGA approximation, where Mn ions are in a divalent state leading to a total magnetic moment of 5 μB per Mn atom.

This thesis is concerned with kinetic characterisation of theinsertion compound LiMn2O4, which is used as positive electrodematerial in rechargeable lithium batteries. Three different typesof electrode configurations have been investigated, namely singleparticles, thin films and composite electrodes. Differentelectrochemical techniques, i.e. linear sweep voltammetry (LSV),electrochemical impedance spectroscopy (EIS), potential step, andgalvanostatic experiments were applied under various experimentalconditions. The majority of the experimental data were analysedby relevant mathematical models used for describing the reactionsteps of insertion compounds. It was concluded that a model based on interfacialcharge-transfer, solid-phase diffusion and an external iR-dropcould be fairly well fitted to LSV data measured on a singleelectrode system over a narrow range of sweep rates. However, itwas also found that the fitted parameter values vary greatly withthe characteristic length and the sweep rate. This indicates thatthe physical description used is too simple for explaining theelectrochemical responses measured over a large range of chargeand discharge rates. EIS was found to be a well-suited technique for separatingtime constants for different physical processes in the insertionand extraction reaction. It was demonstrated that the impedanceresponse is strongly dependent on the current collector used.According to the literature, reasonable values of theexchange-current density and solid-phase diffusion coefficientwere determined for various states-of-discharge, temperatures andelectrolyte compositions. Experiments were carried out in bothliquid and gel electrolytes. A method which improves thedistinction between the time constants related to thematerial’s intrinsic properties and possible porous effectsis presented. The method was applied to composite electrodes.This method utilises, in addition to the impedance responsemeasured in front of the electrode, also the impedance measuredat the backside of the electrode. Finally, the kinetics of a composite electrode was alsoinvestigated by in situ X-ray diffraction (in situ XRD) incombination with galvanostatic and potentiostatic experiments. Noevidence of lithium concentration gradients could be observedfrom XRD data, even at the highest rate applied (i.e. ~6C), thusexcluding solid-phase diffusion and also phase-boundary movement,as described by Fick’s law, as the ratelimiting step. <b>Key words:</b>linear sweep voltammetry, electrochemicalimpedance spectroscopy, potential step, in situ X-raydiffraction, microelectrodes, electrode kinetics, LiMn2O4cathode, rechargeable lithium batteries

Layered crystals with magnetic elements as Co and Fe have been studied. In TlCo2Se2, where Co atoms in one sheet are separated by Tl and Se from the next Co sheet, magnetic interaction within and between the sheets have been studied. Samples doped with 4% 57Fe replaced Co, show a magnetic spiral character with hyperfine fields in a flower shape in the ab-plane. The magnetic moment of 0.46 μB per Co atom derived from the average field is in good agreement with the result from neutron diffraction. In TlCu1.73Fe0.27Se2 the easy axis of magnetisation is the c-axis. The magnetic moment calculated from the Mössbauer data and SQUID magnetrometry is 0.97 μB per Fe atom with TC = 55(5) K. Multilayers of different elements have been studied. The effect of vanadium atoms on iron atoms at the interface of FeNi/V multilayers has been determined and the intermixing at the interface has been calculated to be 2-3 monolayers. For FeNi/Co 1/1 monolayer the magnetic hyperfine field (Bhf) is 45° out-of-plane, while for superlattices containing 2 to 5 monolayers it is in the plane. An study on Fe/Co superlattice were done by experimental, theoretical and simulational methods. The Bhf is highest for the Fe at the second layer next to the interface and gets the bulk value in the centre of thicker Fe layers. Studied magnetic nanoparticles coated with a lipid bilayer (magnetoliposomes) are found to have the magnetite structure but being non-stoichiometric as a result of the manufacturing process. The composition was approximately 32% γ-Fe2O3 and 68% Fe3O4. The oxidation evolution and its effect on magnetic properties of Fe clusters were also studied by means of different techniques. The extraction and insertion mechanism of lithium in the cathode material Li2FeSiO4 has been monitored by in situ x-ray diffraction and Mössbauer spectroscopy during the first two cycles. The relative amount of Fe+3/ Fe+2 at each end state was in good agreement with the results obtained from electrochemical measurements. A possible explanation to the observed lowering of the potential plateau from 3.10 to 2.80 V occurring during the first cycle, involves a structural rearrangement process in which some of the Li ions and the Fe ions are interchanged. The behaviour of small amounts of Fe in brass is investigated using Mössbauer spectroscopy. It was shown that a heat treatment can increase the amount of the precipitates of γ-Fe and ~650° C is the optimal treatment for having the highest amount of this phase.

The role of nanohybrid materials in the fields of polymer composites and electrochemical energy systems is significant since they affect the enhanced physical properties and improved electrochemical performance, respectively. As basic nanomaterials, carbon nanotubes and graphene were utilized due to their outstanding physical properties. With these materials, hybrid nanostructures were generated through a novel synthesis method, modified sol-gel process; namely, carbon nanotubes (CNTs)-maghemite and reduced graphene oxide (rGO)-maghemite nanohybrid materials were developed. In the study on polymer composities, developed CNTs-maghemite (magnetic carbon nanotbues (m-CNTs)) were readily aligned under an externally applied magnetic field, and due to the aligned features of m-CNTs in polymer matrices, it showed much enhanced anisotropic electrical and mechanical properties. In the study on electrochemical energy system (Li-ion batteries), rGO-maghemite were used as anode materials; as a result, they showed improved electrochemical performance for Li-ion batteries due to their specific morphology and characteristics.

Electric vehicles (EVs) offer an exciting opportunity in China both in terms of the potential to build a domestic manufacturing base and the potential to create a strong domestic market for the product. The Chinese nation stands to benefit from both supply-side and demand-side promotion due to the economic stimulus from EV manufacturing and export, the environmental benefits of reduced air pollution and reduced greenhouse gas emissions, and the energy security benefits of transitioning away from foreign oil dependence. The Chinese have several advantages when it comes to stimulating EV industry development and EV deployment, including: leadership in battery technology, great potential for cost competitiveness, an enormous and emerging number of new car buyers, and high level government support. Yet a number of challenges must be taken into account as well, including: shortfalls in overall automobile R&D spending, consumer concerns about Chinese cars’ safety and reliability, enhancing the appeal of the Chinese brand, and heavy national infrastructure demands. This paper will seek to examine the opportunities and challenges associated with EV deployment in China and identify industry actions and policy measures to facilitate the process.

Electrolyte and pyrotechnic pellets are two important components of thermal batteries. Both electrolyte and pyrotechnic pellets are produced by cold compaction of constituent powders. These compacts are integrated in the battery as pellets with sufficient green density, green strength, calorific energy and burning rate (for pyrotechnic only) to provide high performance batteries. In this study, effects of physical properties of the used powders such as particle size distribution, average particle size, particle shape and composition of components and applied compression pressure and their interactions on green density and green strength of electrolyte pellets and in addition, calorific energy and burning rate of pyrotechnic pellets were examined. Statistical experimental designs were constructed to investigate the main and interaction effects of studied variables. 24 two factorial statistically designed experiments&rsquo / results for pyrotechnic pellets exhibited that the compression pressure and iron powder morphology were the most significant factors improving green density and break strength of pyrotechnic pellets. It was shown that the compression pressure had a negative effect on burning rate. Both calorific output and burning rate were increased significantly by increasing KClO4 fraction. In addition, decreasing particle size of KClO4 had also a positive effect on burning rate. The maximum calorific output was obtained at maximum KClO4 fraction. 23 two factorial statistically designed green strength and green density experiments&rsquo / results of electrolyte pellets revealed that, compression pressure was again the dominating factor. Moreover, there was a tendency for higher green density with lower MgO fraction and electrolyte powder average particle size. Besides, the positive effect of decreasing average particle size on green strength was investigated distinctly at low green density values. From the thermal battery perspective, main and interaction effects of variables on the characteristics of electrolyte and pyrotechnic pellets were successfully examined.

<p>This thesis is concerned with kinetic characterisation of theinsertion compound LiMn2O4, which is used as positive electrodematerial in rechargeable lithium batteries. Three different typesof electrode configurations have been investigated, namely singleparticles, thin films and composite electrodes. Differentelectrochemical techniques, i.e. linear sweep voltammetry (LSV),electrochemical impedance spectroscopy (EIS), potential step, andgalvanostatic experiments were applied under various experimentalconditions. The majority of the experimental data were analysedby relevant mathematical models used for describing the reactionsteps of insertion compounds.</p><p>It was concluded that a model based on interfacialcharge-transfer, solid-phase diffusion and an external iR-dropcould be fairly well fitted to LSV data measured on a singleelectrode system over a narrow range of sweep rates. However, itwas also found that the fitted parameter values vary greatly withthe characteristic length and the sweep rate. This indicates thatthe physical description used is too simple for explaining theelectrochemical responses measured over a large range of chargeand discharge rates.</p><p>EIS was found to be a well-suited technique for separatingtime constants for different physical processes in the insertionand extraction reaction. It was demonstrated that the impedanceresponse is strongly dependent on the current collector used.According to the literature, reasonable values of theexchange-current density and solid-phase diffusion coefficientwere determined for various states-of-discharge, temperatures andelectrolyte compositions. Experiments were carried out in bothliquid and gel electrolytes. A method which improves thedistinction between the time constants related to thematerial’s intrinsic properties and possible porous effectsis presented. The method was applied to composite electrodes.This method utilises, in addition to the impedance responsemeasured in front of the electrode, also the impedance measuredat the backside of the electrode.</p><p>Finally, the kinetics of a composite electrode was alsoinvestigated by in situ X-ray diffraction (in situ XRD) incombination with galvanostatic and potentiostatic experiments. Noevidence of lithium concentration gradients could be observedfrom XRD data, even at the highest rate applied (i.e. ~6C), thusexcluding solid-phase diffusion and also phase-boundary movement,as described by Fick’s law, as the ratelimiting step.</p><p><b>Key words:</b>linear sweep voltammetry, electrochemicalimpedance spectroscopy, potential step, in situ X-raydiffraction, microelectrodes, electrode kinetics, LiMn2O4cathode, rechargeable lithium batteries</p>

Le nickelate de lithium "LiNiO2" est l'un des matériaux les plus prometteurs en tant qu'électrode positive pour batteries lithium-carbone. La désintercalation des ions lithium d'un tel matériaux hôte a été étudiée tant sur le plan électrochimique que cristallographique. L'électrochimie a été utilisée de manière spécifique, comme une sonde locale, permettant de rendre compte des processus cristallochimiques internes au matériau. Un modèle explicitant les mécanismes de transition de phase dans le système "LixNiO2" (0.25 < x < 1.00) a été proposé en accord avec les données expérimentale (diffraction des rayons X, diffraction électronique, spectroscopie EXAFS) et les caractéristiques du comportement de la batterie. L'évolution du matériau, après un cyclage électrochimique de longue durée, a également été étudiée sur le plan textural et structural.

Des matériaux lamellaires d'électrode positive pour batteries lithium-ion, de formule Li1+x(Ni0.425Mn0.425Co0.15)1-xO2 (0 < x < 0.12), ont été synthétisés par coprécipitation. Leurs propriétés structurales et physico-chimiques ont été caractérisées par diffraction (rayons X, neutrons et électrons), spectroscopie XPS, mesures magnétiques ... La surlithiation (Li / (Ni+Mn+Co) > 1) entraîne la présence de lithium en excès dans le site des métaux de transition. Une surstructure de type v3.ahex. x v3.a hex. analogue à celle observée pour Li2MnO3 a été mise en évidence par diffraction électronique. Les propriétés électrochimiques et les modifications structurales observées au cours du cyclage ont été caractérisées pour ces matériaux. La surlithiation entraîne la présence d'un " plateau " de potentiel à ~ 4.5V/Li pour le système Li // Li(Ni0.425Mn0.425Co0.15)0.88O2 ; celui-ci a été associé à des changements structuraux irréversibles mettant en jeu une réorganisation cationique dans les feuillets et une perte d'oxygène.

With its long cycle life and scalable design, the vanadium redox flow battery (VRB) is a promising technology for grid energy storage. However, high materials costs have impeded its commercialization. An essential but costly component of the VRB is the ion-exchange membrane. The ideal VRB membrane provides a highly conductive path for protons, prevents crossover of reactive species, and is tolerant of the acidic and oxidizing chemical environment of the cell. In order to study membrane performance and optimize cell design, mathematical models of the separator membrane have been developed. Where previous VRB membrane models considered minimal details of membrane transport, generally focusing on conductivity or self-discharge at zero current, the model presented here considers coupled interactions between each of the major species by way of rigorous material balances and concentrated solution theory. The model describes uptake and transport of sulfuric acid, water, and vanadium ions in Nafion membranes, focusing on operation at high current density. Governing equations for membrane transport are solved in finite difference form using the Newton-Raphson method. Model capabilities were explored, leading to predictions of Ohmic losses, vanadium crossover, and electro-osmotic drag. Experimental methods were presented for validating the model and for further improving estimates of uptake parameters and transport coefficients. / text