Spelling suggestions: "subject:"benders’ decomposition"" "subject:"enders’ decomposition""
41 |
Stochastic Optimization for Integrated Energy System with Reliability Improvement Using Decomposition AlgorithmHuang, Yuping 01 January 2014 (has links)
As energy demands increase and energy resources change, the traditional energy system has been upgraded and reconstructed for human society development and sustainability. Considerable studies have been conducted in energy expansion planning and electricity generation operations by mainly considering the integration of traditional fossil fuel generation with renewable generation. Because the energy market is full of uncertainty, we realize that these uncertainties have continuously challenged market design and operations, even a national energy policy. In fact, only a few considerations were given to the optimization of energy expansion and generation taking into account the variability and uncertainty of energy supply and demand in energy markets. This usually causes an energy system unreliable to cope with unexpected changes, such as a surge in fuel price, a sudden drop of demand, or a large renewable supply fluctuation. Thus, for an overall energy system, optimizing a long-term expansion planning and market operation in a stochastic environment are crucial to improve the system's reliability and robustness. As little consideration was paid to imposing risk measure on the power management system, this dissertation discusses applying risk-constrained stochastic programming to improve the efficiency, reliability and economics of energy expansion and electric power generation, respectively. Considering the supply-demand uncertainties affecting the energy system stability, three different optimization strategies are proposed to enhance the overall reliability and sustainability of an energy system. The first strategy is to optimize the regional energy expansion planning which focuses on capacity expansion of natural gas system, power generation system and renewable energy system, in addition to transmission network. With strong support of NG and electric facilities, the second strategy provides an optimal day-ahead scheduling for electric power generation system incorporating with non-generation resources, i.e. demand response and energy storage. Because of risk aversion, this generation scheduling enables a power system qualified with higher reliability and promotes non-generation resources in smart grid. To take advantage of power generation sources, the third strategy strengthens the change of the traditional energy reserve requirements to risk constraints but ensuring the same level of systems reliability In this way we can maximize the use of existing resources to accommodate internal or/and external changes in a power system. All problems are formulated by stochastic mixed integer programming, particularly considering the uncertainties from fuel price, renewable energy output and electricity demand over time. Taking the benefit of models structure, new decomposition strategies are proposed to decompose the stochastic unit commitment problems which are then solved by an enhanced Benders Decomposition algorithm. Compared to the classic Benders Decomposition, this proposed solution approach is able to increase convergence speed and thus reduce 25% of computation times on the same cases.
|
42 |
Microgrid Optimal Power Flow Based On Generalized Benders DecompositionJamalzadeh, Reza 02 February 2018 (has links)
No description available.
|
43 |
Discrete Two-Stage Stochastic Mixed-Integer Programs with Applications to Airline Fleet Assignment and Workforce Planning ProblemsZhu, Xiaomei 02 May 2006 (has links)
Stochastic programming is an optimization technique that incorporates random variables as parameters. Because it better reflects the uncertain real world than its traditional deterministic counterpart, stochastic programming has drawn increasingly more attention among decision-makers, and its applications span many fields including financial engineering, health care, communication systems, and supply chain management. On the flip side, stochastic programs are usually very difficult to solve, which is further compounded by the fact that in many of the aforementioned applications, we also have discrete decisions, thereby rendering these problems even more challenging.
In this dissertation, we study the class of two-stage stochastic mixed-integer programs (SMIP), which, as its name suggests, lies at the confluence of two formidable classes of problems. We design a novel algorithm for this class of problems, and also explore specialized approaches for two related real-world applications.
Although a number of algorithms have been developed to solve two-stage SMIPs, most of them deal with problems containing purely integer or continuous variables in either or both of the two stages, and frequently require the technology and/or recourse matrices to be deterministic. As a ground-breaking effort, in this work, we address the challenging class of two-stage SMIPs that involve 0-1 mixed-integer variables in both stages. The only earlier work on solving such problems (Carøe and Schultz (1999)) requires the optimization of several non-smooth Lagrangian dual problems using subgradient methods in the bounding process, which turns out to be computationally very expensive.
We begin with proposing a decomposition-based branch-and-bound (DBAB) algorithm for solving two-stage stochastic programs having 0-1 mixed-integer variables in both stages. Since the second-stage problems contain binary variables, their value functions are in general nonconvex and discontinuous; hence, the classical Benders' decomposition approach (or the L-shaped method) for solving two-stage stochastic programs, which requires convex subproblem value functions, cannot be directly applied. This motivates us to relax the second-stage problems and accompany this relaxation with a convexification process. To make this process computationally efficient, we propose to construct a certain partial convex hull representation of the two-stage solution space, using the relaxed second-stage constraints and the restrictions confining the first-stage variables to lie within some hyperrectangle. This partial convex hull is sequentially generated using a convexification scheme, such as the Reformulation-Linearization Technique (RLT), which yields valid inequalities that are functions of the first-stage variables and, of noteworthy importance, are reusable in the subsequent subproblems by updating the values of the first-stage variables. Meanwhile, since the first stage contains continuous variables, whenever we tentatively fix these variables at some given feasible values, the resulting constraints may not be facial with respect to the associated bounding constraints that are used to construct the partial convex hull. As a result, the constructed Benders' subproblems define lower bounds for the second-stage value functions, and likewise, the resulting Benders' master problem provides a lower bound for the original stochastic program defined over the same hyperrectangle. Another difficulty resulting from continuous first-stage variables is that when the given first-stage solution is not extremal with respect to its bounds, the second-stage solution obtained for a Benders' subproblem defined with respect to a partial convex hull representation in the two-stage space may not satisfy the model's binary restrictions. We thus need to be able to detect whether or not a Benders' subproblem is solved by a given fractional second-stage solution. We design a novel procedure to check this situation in the overall algorithmic scheme. A key property established, which ensures global convergence, is that these lower bounds become exact if the given first-stage solution is a vertex of the defining hyperrectangle, or if the second-stage solution satisfies the binary restrictions.
Based on these algorithmic constructs, we design a branch-and-bound procedure where the branching process performs a hyperrectangular partitioning of the projected space of the first-stage variables, and lower bounds for the nodal problems are computed by applying the proposed modified Benders' decomposition method. We prove that, when using the least-lower-bound node-selection rule, this algorithm converges to a global optimal solution. We also show that the derived RLT cuts are not only reusable in subsequent Benders iterations at the same node, but are also inheritable by the subproblems of the children nodes. Likewise, the Benders' cuts derived for a given sub-hyperrectangle can also be inherited by the lower bounding master programs solved for its children nodes. Using these cut inheritance properties results in significant savings in the overall computational effort.
Some numerical examples and computational results are presented to demonstrate the efficacy of this approach. The sizes of the deterministic equivalent of our test problems range from having 386 continuous variables, 386 binary variables, and 386 constraints, up to 1795 continuous variables, 1539 binary variables, and 1028 constraints. The results reveal an average savings in computational effort by a factor of 9.5 in comparison with using a commercial mixed-integer programming package (CPLEX 8.1) on a deterministic equivalent formulation.
We then explore an important application of SMIP to enhance the traditional airline fleet assignment models (FAM). Given a flight schedule network, the fleet assignment problem solved by airline companies is concerned with assigning aircraft to flight legs in order to maximize profit with respect to captured path- or itinerary-based demand. Because certain related crew scheduling regulations require early information regarding the type of aircraft serving each flight leg, the current practice adopted by airlines is to solve the fleet assignment problem using estimated demand data 10-12 weeks in advance of departure. Given the level of uncertainty, deterministic models at this early stage are inadequate to obtain a good match of aircraft capacity with passenger demands, and revisions to the initial fleet assignment become naturally pertinent when the observed demand differs considerably from the assigned aircraft capacities. From this viewpoint, the initial decision should embrace various market scenarios so that it incorporates a sufficient look-ahead feature and provides sufficient flexibility for the subsequent re-fleeting processes to accommodate the inevitable demand fluctuations.
With this motivation, we propose a two-stage stochastic programming approach in which the first stage is concerned with the initial fleet assignment decisions and, unlike the traditional deterministic methodology, focuses on making only a family-level assignment to each flight leg. The second stage subsequently performs the detailed assignments of fleet types within the allotted family to each leg under each of the multiple potential scenarios that address corresponding path- or itinerary-based demands. In this fashion, the initial decision of what aircraft family should serve each flight leg accomplishes the purpose of facilitating the necessary crew scheduling decisions, while judiciously examining the outcome of future re-fleeting actions based on different possible demand scenarios. Hence, when the actual re-fleeting process is enacted several weeks later, this anticipatory initial family-level assignment will hopefully provide an improved overall fleet type re-allocation that better matches demand. This two-stage stochastic model is complemented with a secondary model that performs adjustments within each family, if necessary, to provide a consistent fleet type-assignment information for accompanying decision processes, such as yield management. We also propose several enhanced fleet assignment models, including a robust optimization model that controls decision variation among scenarios and a stochastic programming model that considers the recapture effect of spilled demand.
In addition to the above modeling concepts and framework, we also contribute in developing effective solution approaches for the proposed model, which is a large-scale two-stage stochastic 0-1 mixed-integer program. Because the most pertinent information needed from the initial fleet assignment is at the family level, and the type-level assignment is subject to change at the re-fleeting stage according to future demand realizations, our solution approach focuses on assigning aircraft families to the different legs in the flight network at the first stage, while finding relaxed second-stage solutions under different demand scenarios. Based on a polyhedral study of a subsystem extracted from the original model, we derive certain higher-dimensional convex hull as well as partial convex hull representations for this subsystem. Accordingly, we propose two variants for the primary model, both of which relax the binary restrictions on the second-stage variables, but where the second variant then also accommodates the partial convex hull representations, yielding a tighter, albeit larger, relaxation. For each variant, we design a suitable solution approach predicated on Benders' decomposition methodology. Using certain realistic large-scale flight network test problems having 900 flight legs and 1,814 paths, as obtained from United Airlines, the proposed stochastic modeling approach was demonstrated to increase daily expected profits by about 3% (which translates to about $160 million per year) in comparison with the traditional deterministic model in present usage, which considers only the expected demand. Only 1.6% of the second-stage binary variables turn out to be fractional in the first variant, and this number is further reduced to 1.2% by using the tighter variant. Furthermore, when attempting to solve the deterministic equivalent formulation for these two variants using a commercial mixed-integer programming package (CPLEX 8.1), both the corresponding runs were terminated after reaching a 25-hour cpu time limit. At termination, the software was still processing the initial LP relaxation at the root node for each of these runs, and no feasible basis was found. Using the proposed algorithms, on the other hand, the solution times were significantly reduced to 5 and 19 hours for the two variants, respectively. Considering that the fleet assignment models are solved around three months in advance of departure, this solution time is well acceptable at this early planning stage, and the improved quality in the solution produced by considering the stochasticity in the system is indeed highly desirable.
Finally, we address another practical workforce planning problem encountered by a global financial firm that seeks to manage multi-category workforce for functional areas located at different service centers, each having office-space and recruitment-capacity constraints. The workforce demand fluctuates over time due to market uncertainty and dynamic project requirements. To hedge against the demand fluctuations and the inherent uncertainty, we propose a two-stage stochastic programming model where the first stage makes personnel recruiting and allocation decisions, while the second stage, based on the given personnel decision and realized workforce demand, decides on the project implementation assignment. The second stage of the proposed model contains binary variables that are used to compute and also limit the number of changes to the original plan. Since these variables are concerned with only one quality aspect of the resulting workforce plan and do not affect feasibility issues, we replace these binary variables with certain conservative policies regarding workforce assignment change restrictions in order to obtain more manageable subproblems that contain purely continuous variables. Numerical experiments reveal that the stochastic programming approach results in significantly fewer alterations to the original workforce plan. When using a commercial linear programming package CPLEX 9.0 to solve the deterministic equivalent form directly, except for a few small-sized problems, this software failed to produce solutions due to memory limitations, while the proposed Benders' decomposition-based solution approach consistently solved all the practical-sized test problems with reasonable effort.
To summarize, this dissertation provides a significant advancement in the algorithmic development for solving two-stage stochastic mixed-integer programs having 0-1 mixed-integer variables in both stages, as well as in its application to two important contemporary real-world applications. The framework for the proposed solution approaches is to formulate tighter relaxations via partial convex hull representations and to exploit the resulting structure using suitable decomposition methods. As decision robustness is becoming increasingly relevant from an economic viewpoint, and as computer technological advances provide decision-makers the ability to explore a wide variety of scenarios, we hope that the proposed algorithms will have a notable positive impact on solving stochastic mixed-integer programs. In particular, the proposed stochastic programming airline fleet assignment and the workforce planning approaches studied herein are well-poised to enhance the profitability and robustness of decisions made in the related industries, and we hope that similar improvements are adapted by more industries where decisions need to be made in the light of data that is shrouded by uncertainty. / Ph. D.
|
44 |
Integrated Airline Operations: Schedule Design, Fleet Assignment, Aircraft Routing, and Crew SchedulingBae, Ki-Hwan 05 January 2011 (has links)
Air transportation offers both passenger and freight services that are essential for economic growth and development. In a highly competitive environment, airline companies have to control their operating costs by managing their flights, aircraft, and crews effectively. This motivates the extensive use of analytical techniques to solve complex problems related to airline operations planning, which includes schedule design, fleet assignment, aircraft routing, and crew scheduling. The initial problem addressed by airlines is that of schedule design, whereby a set of flights having specific origin and destination cities as well as departure and arrival times is determined. Then, a fleet assignment problem is solved to assign an aircraft type to each flight so as to maximize anticipated profits. This enables a decomposition of subsequent problems according to the different aircraft types belonging to a common family, for each of which an aircraft routing problem and a crew scheduling or pairing problem are solved. Here, in the aircraft routing problem, a flight sequence or route is built for each individual aircraft so as to cover each flight exactly once at a minimum cost while satisfying maintenance requirements. Finally, in the crew scheduling or pairing optimization problem, a minimum cost set of crew rotations or pairings is constructed such that every flight is assigned a qualified crew and that work rules and collective agreements are satisfied. In practice, most airline companies solve these problems in a sequential manner to plan their operations, although recently, an increasing effort is being made to develop novel approaches for integrating some of the airline operations planning problems while retaining tractability. This dissertation formulates and analyzes three different models, each of which examines a composition of certain pertinent airline operational planning problems. A comprehensive fourth model is also proposed, but is relegated for future research.
In the first model, we integrate fleet assignment and schedule design by simultaneously considering optional flight legs to select along with the assignment of aircraft types to all scheduled legs. In addition, we consider itinerary-based demands pertaining to multiple fare-classes. A polyhedral analysis of the proposed mixed-integer programming model is used to derive several classes of valid inequalities for tightening its representation. Solution approaches are developed by applying Benders decomposition method to the resulting lifted model, and computational experiments are conducted using real data obtained from a major U.S. airline (United Airlines) to demonstrate the efficacy of the proposed procedures as well as the benefits of integration. A comparison of the experimental results obtained for the basic integrated model and for its different enhanced representations reveals that the best modeling strategy among those tested is the one that utilizes a variety of five types of valid inequalities for moderately sized problems, and further implements a Benders decomposition approach for relatively larger problems. In addition, when a heuristic sequential fixing step is incorporated within the algorithm for even larger sized problems, the computational results demonstrate a less than 2% deterioration in solution quality, while reducing the effort by about 21%. We also performed an experiment to assess the impact of integration by comparing the proposed integrated model with a sequential implementation in which the schedule design is implemented separately before the fleet assignment stage based on two alternative profit maximizing submodels. The results obtained demonstrate a clear advantage of utilizing the integrated model, yielding an 11.4% and 5.5% increase in profits in comparison with using the latter two sequential models, which translates to an increase in annual profits by about $28.3 million and $13.7 million, respectively.
The second proposed model augments the first model with additional features such as flexible flight times (i.e., departure time-windows), schedule balance, and demand recapture considerations. Optional flight legs are incorporated to facilitate the construction of a profitable schedule by optimally selecting among such alternatives in concert with assigning the available aircraft fleet to all the scheduled legs. Moreover, network effects and realistic demand patterns are effectively represented by examining itinerary-based demands as well as multiple fare-classes. Allowing flexibility on the departure times of scheduled flight legs within the framework of an integrated model increases connection opportunities for passengers, hence yielding robust schedules while saving fleet assignment costs. A provision is also made for airlines to capture an adequate market share by balancing flight schedules throughout the day. Furthermore, demand recapture considerations are modeled to more realistically represent revenue realizations. For this proposed mixed-integer programming model, which integrates the schedule design and fleet assignment processes while considering flexible flight times, schedule balance, and recapture issues, along with optional legs, itinerary-based demands, and multiple fare-classes, we perform a polyhedral analysis and utilize the Reformulation-Linearization Technique in concert with suitable separation routines to generate valid inequalities for tightening the model representation. Effective solution approaches are designed by applying Benders decomposition method to the resulting tightened model, and computational results are presented to demonstrate the efficacy of the proposed procedures. Using real data obtained from United Airlines, when flight times were permitted to shift by up to 10 minutes, the estimated increase in profits was about $14.9M/year over the baseline case where only original flight legs were used. Also, the computational results indicated a 1.52% and 0.49% increase in profits, respectively, over the baseline case, while considering two levels of schedule balance restrictions, which can evidently also enhance market shares. In addition, we measured the effect of recaptured demand with respect to the parameter that penalizes switches in itineraries. Using values of the parameter that reflect 1, 50, 100, or 200 dollars per switched passenger, this yielded increases in recaptured demand that induced additional profits of 2.10%, 2.09%, 2.02%, and 1.92%, respectively, over the baseline case. Overall, the results obtained from the two schedule balance variants of the proposed integrated model that accommodate all the features of flight retiming, schedule balance, and demand recapture simultaneously, demonstrated a clear advantage by way of $35.1 and $31.8 million increases in annual profits, respectively, over the baseline case in which none of these additional features is considered.
In the third model, we integrate the schedule design, fleet assignment, and aircraft maintenance routing decisions, while considering optional legs, itinerary-based demands, flexible flight retimings, recapture, and multiple fare-classes. Instead of utilizing the traditional time-space network (TSN), we formulate this model based on a flight network (FN) that provides greater flexibility in accommodating integrated operational considerations. In order to consider through-flights (i.e., a sequence of flight legs served by the same aircraft), we append a set of constraints that matches aircraft assignments on certain inbound legs into a station with that on appropriate outbound legs at the same station. Through-flights can generate greater revenue because passengers are willing to pay a premium for not having to change aircraft on connecting flights, thereby reducing the possibility of delays and missed baggage. In order to tighten the model representation and reduce its complexity, we apply the Reformulation-Linearization Technique (RLT) and also generate other classes of valid inequalities. In addition, since the model possesses many equivalent feasible solutions that can be obtained by simply reindexing the aircraft of the same type that depart from the same station, we introduce a set of suitable hierarchical symmetry-breaking constraints to enhance the model solvability by distinguishing among aircraft of the same type. For the resulting large-scale augmented model formulation, we design a Benders decomposition-based solution methodology and present extensive computational results to demonstrate the efficacy of the proposed approach. We explored four different algorithmic variants, among which the best performing procedure (Algorithm A1) adopted two sequential levels of Benders partitioning method. We then applied Algorithm A1 to perform several experiments to study the effects of different modeling features and algorithmic strategies. A summary of the results obtained is as follows. First, the case that accommodated both mandatory and optional through-flight leg pairs in the model based on their relative effects on demands and enhanced revenues achieved the most profitable strategy, with an estimated increase in expected annual profits of $2.4 million over the baseline case. Second, utilizing symmetry-breaking constraints in concert with compatible objective perturbation terms greatly enhanced problem solvability and thus promoted the detection of improved solutions, resulting in a $5.8 million increase in estimated annual profits over the baseline case. Third, in the experiment that considers recapture of spilled demand from primary itineraries to other compatible itineraries, the different penalty parameter values (100, 50, and 1 dollars per re-routed passenger) induced average respective proportions of 3.2%, 3.4%, and 3.7% in recaptured demand, resulting in additional estimated annual profits of $3.7 million, $3.8 million, and $4.0 million over the baseline case. Finally, incorporating the proposed valid inequalities within the model to tighten its representation helped reduce the computational effort by 11% on average, while achieving better solutions that yielded on average an increase in estimated annual profits of $1.4 million.
In closing, we propose a fourth more comprehensive model in which the crew scheduling problem is additionally integrated with fleet assignment and aircraft routing. This integration is important for airlines because crew costs are the second largest component of airline operating expenses (after fuel costs), and the assignment and routing of aircraft plus the assignment of crews are two closely interacting components of the planning process. Since crews are qualified to typically serve a single aircraft family that is comprised of aircraft types having a common cockpit configuration and crew rating, the aircraft fleeting and routing decisions significantly impact the ensuing assignment of cockpit crews to flights. Therefore it is worthwhile to investigate new models and solution approaches for the integrated fleeting, aircraft routing, and crew scheduling problem, where all of these important inter-dependent processes are handled simultaneously, and where the model can directly accommodate various work rules such as imposing a specified minimum and maximum number of flying hours for crews on any given pairing, and a minimum number of departures at a given crew base for each fleet group. However, given that the crew scheduling problem itself is highly complex because of the restrictive work rules that must be heeded while constructing viable duties and pairings, the formulated integrated model would require further manipulation and enhancements along with the design of sophisticated algorithms to render it solvable. We therefore recommend this study for future research, and we hope that the modeling, analysis, and algorithmic development and implementation work performed in this dissertation will lend methodological insights into achieving further advances along these lines. / Ph. D.
|
45 |
Modeling and Analysis of a Feedstock Logistics ProblemJudd, Jason D. 02 May 2012 (has links)
Recently, there has been a surge in the research and application of "Green energy" in the United States. This has been driven by the following three objectives: (1) to reduce the nation's reliance on foreign oil, (2) to mitigate emission of greenhouse gas, and (3) to create an economic stimulus within the United States. Switchgrass is the biomass of choice for the Southeastern United States. In this dissertation, we address a feedstock logistics problem associated with the delivery of switchgrass for conversion into biofuel. In order to satisfy the continual demand of biomass at a bioenergy plant, production fields within a 48-km radius of its location are assumed to be attracted into production. The bioenergy plant is expected to receive as many as 50-400 loads of biomass per day. As a result, an industrialized transportation system must be introduced as early as possible in order to remove bottlenecks and reduce the total system cost. Additionally, we assume locating multiple bioenergy plants within a given region for the production of biofuel. We develop mixed integer programming formulations for the feedstock logistics problem that we address and for some related problems, and we solve them either through the use of decomposition-based methods or directly through the use of CPLEX 12.1.0.
The feedstock logistics problem that we address spans the entire system-from the growing of switchgrass to the transporting of bio-crude oil, a high energy density intermediate product, to a refinery for conversion into a final product. To facilitate understanding, we present the reader with a case study that includes a preliminary cost analysis of a real-life-based instance in order to provide the reader appropriate insights of the logistics system before applying optimization techniques for its solution. First, we consider the benefits of active versus passive ownership of the production fields. This is followed by a discussion on the selection of baler type, and then, a discussion of contracts between various business entities. The advantages of storing biomass at a satellite storage location (SSL) and interactions between the operations performed at the production field with those performed at the storage locations are then established. We also provide a detailed description of the operations performed at a SSL. Three potential equipment options are presented for transporting biomass from the SSLs to a utilization point, defined in this study as a Bio-crude Plant (BcP). The details of the entire logistics chain are presented in order to highlight the need for making decisions in view of the entire chain rather than basing them on its segments.
We model the feedstock logistics problem as a combination of a 2-level facility location-allocation problem and a multiple traveling salesmen problem (mATSP). The 2-level facility location-allocation problem pertains to the allocation of production fields to SSLs and SSLs to one of the multiple bioenergy plants. The mATSP arises because of the need for scheduling unloading operations at the SSLs. To this end, we provide a detailed study of 13 formulations of the mATSP and their reformulations as ATSPs. First, we assume that the SSLs are always full, regardless of when they are scheduled to be unloaded. We, then, relax this assumption by providing precedence constraints on the availability of the SSLs. This precedence is defined in two different ways and, is then, effectively modeled utilizing all the formulations for the mATSP and ATSP.
Given the location of a BcP for the conversion of biomass to bio-crude oil, we develop a feedstock logistics system that relies on the use of SSLs for temporary storage and loading of round bales. Three equipment systems are considered for handling biomass at the SSLs, and they are either placed permanently or are mobile, and thereby, travel from one SSL to another. We use a mathematical programming-based approach to determine SSLs and equipment routes in order to minimize the total cost incurred. The mathematical program is applied to a real-life production region in South-central Virginia (Gretna, VA), and it clearly reveals the benefits of using SSLs as a part of the logistics system. Finally, we provide a sensitivity analysis on the input parameters that we used. This analysis highlights the key cost factors in the model, and it emphasizes areas where biggest gains can be achieved for further cost reduction.
For a more general scenario, where multiple BcPs have to be located, we use a nested Benders' decomposition-based method. First, we prove the validity of using this method. We, then, employ this method for the solution of a potential real-life instance. Moreover, we successfully solve problems that are more than an order of magnitude larger than those solved directly by CPLEX 12.1.0.
Finally, we develop a Benders' decomposition-based method for the solution of a problem that gives rise to a binary sub-problem. The difficulty arises because of the sub-problem being an integer program for which the dual solution is not readily available. Our approach consists of first solving the integer sub-problem, and then, generating the convex hull at the optimal integer point. We illustrate this approach for an instance for which such a convex hull is readily available, but otherwise, it is too expensive to generate for the entire problem. This special instance is the solution of the mATSP (using Benders' decomposition) for which each of the sub-problems is an ATSP. The convex hull for the ATSP is given by the Dantzig, Fulkerson, and Johnson constraints. These constraints at a given integer solution point are only polynomial in number. With the inclusion of these constraints, a linear programming solution and its corresponding dual solution can now be obtained at the optimal integer points. We have proven the validity of using this method. However, the success of our algorithm is limited because of a large number of integer problems that must be solved at every iteration. While the algorithm is theoretically promising, the advantages of the decomposition do not seem to outweigh the additional cost resulting from solving a larger number of decomposed problems. / Ph. D.
|
46 |
Dynamic and Robust Capacitated Facility Location in Time Varying Demand EnvironmentsTorres Soto, Joaquin 2009 May 1900 (has links)
This dissertation studies models for locating facilities in time varying demand
environments. We describe the characteristics of the time varying demand that motivate
the analysis of our location models in terms of total demand and the change
in value and location of the demand of each customer. The first part of the dissertation
is devoted to the dynamic location model, which determines the optimal
time and location for establishing capacitated facilities when demand and cost parameters
are time varying. This model minimizes the total cost over a discrete and
finite time horizon for establishing, operating, and closing facilities, including the
transportation costs for shipping demand from facilities to customers. The model
is solved using Lagrangian relaxation and Benders? decomposition. Computational
results from different time varying total demand structures demonstrate, empirically,
the performance of these solution methods.
The second part of the dissertation studies two location models where relocation
of facilities is not allowed and the objective is to determine the optimal location
of capacitated facilities that will have a good performance when demand and cost
parameters are time varying. The first model minimizes the total cost for opening
and operating facilities and the associated transportation costs when demand and
cost parameters are time varying. The model is solved using Benders? decomposition. We show that in the presence of high relocation costs of facilities (opening and closing
costs), this model can be solved as a special case by the dynamic location model. The
second model minimizes the maximum regret or opportunity loss between a robust
configuration of facilities and the optimal configuration for each time period. We
implement local search and simulated annealing metaheuristics to efficiently obtain
near optimal solutions for this model.
|
47 |
On the Dynamics and Statics of Power System Operation : Optimal Utilization of FACTS Devicesand Management of Wind Power UncertaintyNasri, Amin January 2014 (has links)
Nowadays, power systems are dealing with some new challenges raisedby the major changes that have been taken place since 80’s, e.g., deregu-lation in electricity markets, significant increase of electricity demands andmore recently large-scale integration of renewable energy resources such aswind power. Therefore, system operators must make some adjustments toaccommodate these changes into the future of power systems.One of the main challenges is maintaining the system stability since theextra stress caused by the above changes reduces the stability margin, andmay lead to rise of many undesirable phenomena. The other important chal-lenge is to cope with uncertainty and variability of renewable energy sourceswhich make power systems to become more stochastic in nature, and lesscontrollable.Flexible AC Transmission Systems (FACTS) have emerged as a solutionto help power systems with these new challenges. This thesis aims to ap-propriately utilize such devices in order to increase the transmission capacityand flexibility, improve the dynamic behavior of power systems and integratemore renewable energy into the system. To this end, the most appropriatelocations and settings of these controllable devices need to be determined.This thesis mainly looks at (i) rotor angle stability, i.e., small signal andtransient stability (ii) system operation under wind uncertainty. In the firstpart of this thesis, trajectory sensitivity analysis is used to determine themost suitable placement of FACTS devices for improving rotor angle sta-bility, while in the second part, optimal settings of such devices are foundto maximize the level of wind power integration. As a general conclusion,it was demonstrated that FACTS devices, installed in proper locations andtuned appropriately, are effective means to enhance the system stability andto handle wind uncertainty.The last objective of this thesis work is to propose an efficient solutionapproach based on Benders’ decomposition to solve a network-constrained acunit commitment problem in a wind-integrated power system. The numericalresults show validity, accuracy and efficiency of the proposed approach. / <p>The Doctoral Degrees issued upon completion of the programme are issued by Comillas Pontifical University, Delft University of Technology and KTH Royal Institute of Technology. The invested degrees are official in Spain, the Netherlands and Sweden, respectively.QC 20141028</p>
|
48 |
[en] ENERGY AND RESERVE SCHEDULING WITH POST-CONTINGENCY TRANSMISSION SWITCHING: A SMART GRID APPLICATION / [pt] UMA APLICAÇÃO DE SMART GRID: DESPACHO ÓTIMO - ENERGIA E RESERVA - COM SWITCH NA TRANSMISSÃO PÓS-CONTINGÊNCIAGUSTAVO ALBERTO AMARAL AYALA 26 March 2018 (has links)
[pt] Esta tese de doutorado é composta de dois artigos científicos com contribuições na área de Smart Grid. Além disso, a tese também contribui para o desenvolvimento de soluções computacionais eficientes para problemas de programação linear mista e inteira. Outra importante contribuição é o desenvolvimento de método de decomposição benders com segundo estágio inteiro e não convexo aplicado ao problema de Transmission Switching. O primeiro artigo científico mostra os benefícios com o advento de uma rede inteligente e o aumento da capacidade do operador do sistema de energia elétrica em tomar ações corretivas em face de ocorrências de contingências. O artigo também analisa consequências práticas na capacidade de self-healing da rede pós-contingência. Em nosso contexto, uma rede self-healing é uma rede com total flexibilidade para ajustar a geração e as linhas de transmissão antes e depois da ocorrência de alguma contingência. Resultados numéricos mostram significantes reduções no corte de carga para cada contingência e no total. Foi considerado um único período que representa a demanda de pico do sistema, comparou-se o novo método com os utilizados em publicações anteriores. O segundo artigo contribui também para a aplicação da tecnologia de Smart Grid, em particular a teoria de Transmission Switching. De fato, desenvolvemos uma estratégia de solução para lidar com a complexibilidade NP-Hard criada pelas variáveis de transmission switching e unit commitment do problema de otimização. Foi desenvolvida uma solução algorítmica baseada na teoria dos grafos. Estudou-se a estrutura topológica desses problemas. Além disso, a maior contribuição foi o desenvolvimento de um novo método de decomposição de benders aplicado para o problema de transmission switching com o segundo estágio inteiro e não convexo. Para lidar com este problema de não convexidade, foi desenvolvido um método de convexificação sequencial, implícito a decomposição de benders. / [en] This PhD Thesis is composed by two papers with contributions on operations research applied to smart grid theory. The first paper highlights the economic and security benefits of an enhanced system operation with the advent of a smart grid technology by introducing a novel model, which is a joint energy and reserve scheduling that incorporates the network capability to switch transmission lines as a corrective action to enhance the system capability to circumvent contingency events. The main goal is to reduce operating costs and electric power outages, by adjusting the network connectivity when a contingency occurs. In such a framework, results show that, with a limited number of corrective switches, the system operator is able to circumvent a wider range of contingencies, while resulting in lower operational costs and reserve levels. In our context, a grid that is capable to adjust its generation and also its topology through post-contingency line switching is called a self-healing grid, and its importance in network security and operating costs is demonstrated in this work. The graph structure is explored in the algorithmic solution of the post-contingency transmission switching problem. Numerical results demonstrate a significant reduction in total load shedding and operating cost. It has been also illustrated an expressive improvement in terms of security and operating cost, in comparison to the transmission switching models previously published. The second paper is an application of a modified Benders decomposition to the post-contingency transmission switching problem. The decomposition is an attempt to deal with the NP-hard optimization problem created by the transmission switching and unit commitment variables. The major contribution is the application of a new benders decomposition approach to the problem of transmission switching, in which the first and second stages problems are a mixed-integer program. To deal with this issue, it is used a Branch and Bound (B&B) procedure for the first-stage problem and a sequential convexification procedure for the second-stage problem.
|
49 |
Algorithmes heuristiques et exacts pour le problème de l’ensemble dominant connexe minimumSoualah, Sofiane 08 1900 (has links)
No description available.
|
50 |
Optimisation convexe non-différentiable et méthodes de décomposition en recherche opérationnelle / Convex nonsmooth optimization and decomposition methods in operations researchZaourar, Sofia 04 November 2014 (has links)
Les méthodes de décomposition sont une application du concept de diviser pour régner en optimisation. L'idée est de décomposer un problème d'optimisation donné en une séquence de sous-problèmes plus faciles à résoudre. Bien que ces méthodes soient les meilleures pour un grand nombre de problèmes de recherche opérationnelle, leur application à des problèmes réels de grande taille présente encore de nombreux défis. Cette thèse propose des améliorations méthodologiques et algorithmiques de méthodes de décomposition. Notre approche est basée sur l'analyse convexe et l'optimisation non-différentiable. Dans la décomposition par les contraintes (ou relaxation lagrangienne) du problème de planification de production électrique, même les sous-problèmes sont trop difficiles pour être résolus exactement. Mais des solutions approchées résultent en des prix instables et chahutés. Nous présentons un moyen simple d'améliorer la structure des prix en pénalisant leurs oscillations, en utilisant en particulier une régularisation par variation totale. La consistance de notre approche est illustrée sur des problèmes d'EDF. Nous considérons ensuite la décomposition par les variables (ou de Benders) qui peut avoir une convergence excessivement lente. Avec un point de vue d'optimisation non-différentiable, nous nous concentrons sur l'instabilité de l'algorithme de plans sécants sous-jacent à la méthode. Nous proposons une stabilisation quadratique de l'algorithme de Benders, inspirée par les méthodes de faisceaux en optimisation convexe. L'accélération résultant de cette stabilisation est illustrée sur des problèmes de conception de réseau et de localisation de plates-formes de correspondance (hubs). Nous nous intéressons aussi plus généralement aux problèmes d'optimisation convexe non-différentiable dont l'objectif est coûteux à évaluer. C'est en particulier une situation courante dans les procédures de décomposition. Nous montrons qu'il existe souvent des informations supplémentaires sur le problème, faciles à obtenir mais avec une précision inconnue, qui ne sont pas utilisées dans les algorithmes. Nous proposons un moyen d'incorporer ces informations incontrôlées dans des méthodes classiques d'optimisation convexe non-différentiable. Cette approche est appliquée avec succès à desproblèmes d'optimisation stochastique. Finalement, nous introduisons une stratégie de décomposition pour un problème de réaffectation de machines. Cette décomposition mène à une nouvelle variante de problèmes de conditionnement vectoriel (vectorbin packing) où les boîtes sont de taille variable. Nous proposons des heuristiques efficaces pour ce problème, qui améliorent les résultats de l'état de l'art du conditionnement vectoriel. Une adaptation de ces heuristiques permet de construire des solutions réalisables au problème de réaffectation de machines de Google. / Decomposition methods are an application of the divide and conquer principle to large-scale optimization. Their idea is to decompose a given optimization problem into a sequence of easier subproblems. Although successful for many applications, these methods still present challenges. In this thesis, we propose methodological and algorithmic improvements of decomposition methods and illustrate them on several operations research problems. Our approach heavily relies on convex analysis and nonsmooth optimization. In constraint decomposition (or Lagrangian relaxation) applied to short-term electricity generation management, even the subproblems are too difficult to solve exactly. When solved approximately though, the obtained prices show an unstable noisy behaviour. We present a simple way to improve the structure of the prices by penalizing their noisy behaviour, in particular using a total variation regularization. We illustrate the consistency of our regularization on real-life problems from EDF. We then consider variable decomposition (or Benders decomposition), that can have a very slow convergence. With a nonsmooth optimization point of view on this method, we address the instability of Benders cutting-planes algorithm. We present an algorithmic stabilization inspired by bundle methods for convex optimization. The acceleration provided by this stabilization is illustrated on network design andhub location problems. We also study more general convex nonsmooth problems whose objective function is expensive to evaluate. This situation typically arises in decomposition methods. We show that it often exists extra information about the problem, cheap but with unknown accuracy, that is not used by the algorithms. We propose a way to incorporate this coarseinformation into classical nonsmooth optimization algorithms and apply it successfully to two-stage stochastic problems.Finally, we introduce a decomposition strategy for the machine reassignment problem. This decomposition leads to a new variant of vector bin packing problems, where the bins have variable sizes. We propose fast and efficient heuristics for this problem that improve on state of the art results of vector bin packing problems. An adaptation of these heuristics is also able to generate feasible solutions for Google instances of the machine reassignment problem.
|
Page generated in 0.1225 seconds