No description available.

The book provides a deep insight into the successful organisation, management and marketing of booths at trade shows. By giving practical examples and explanations, Solberg Søilen aims at examining previous research and exploring factors and aspects which can lead, if properly applied, to successful boothmanship. Findings were, that the book is written rather as a guidebook for inexperienced readers in the field of marketing and trade show intelligence. Whereas the exhibiting of marketing is discussed in detail, the topic of “trade show intelligence” is not covered in depth and, thus, the title is rather misleading.Overall, the book is easy to read and follow due to the provided examples, tables and graphs, which enhance the reader’s understanding.

This theoretical-empirical diploma thesis deals with chuchotage, i.e. whispered interpreting. The analysis focuses on chuchotage without using equipment, however some aspects of whispered interpreting using the portable interpretation equipment are discussed and compared with simultaneous booth interpreting. In the theoretical part of the thesis, relevant research findings are summarized and an introduction to the selected problem field is provided. Subsequently, I name occasions on which this type of interpretation is usually applied and discuss advantages and disadvantages of it with respect to the interpreter himself, the client and other participants. This part also focuses on the working conditions during whispered interpreting (positioning of the interpreter, acoustic conditions, relation between the interpreter and other participants, personal needs of the interpreter and cognitive factors). The empirical part presents the actual research based on questionnaires that aims to describe the current situation on the interpretation market in the Czech Republic (usage extent of whispered interpreting, working conditions of the interpreter, comparison of whispered interpreting and simultaneous booth interpreting). This part deals also with the quality and mistakes made during the interpretation. As...

<p>Multiplication is an important part of real-time system applications. Various hardware parallel multipliers used in such applications have been proposed. However, when the operand sizes of the multipliers and the process technology need to be changed, the existing multipliers have to be redesigned. </p><p>From the point of library cell reuse, this master thesis work aims at developing a module generator for parallel multipliers with the help of software programs. This generator can be used to create the gate-level schematic for fixed point two's complement number multipliers. Based on the generated schematic, the entire multiplier can be implemented by small manual intervention. This feature can reduce the time of chip design. </p><p>The design phases consist of the logic, circuit and physical designs. The logic design includes gate-level schematic generation with C and SKILL programs and structural VHDL-code descriptions as well as validation. The circuit and physical design are custom in Cadence and the routing uses automatic place and route tools. </p><p>To demonstrate the design method, an 18 by 18-bit modified Booth recoded multiplier was implemented in 0.18 µm CMOS process with a supply voltage of 1.2 V and simulated using simulator (Spectre). The number of integrated transistors is 13000 and the active area is 85000 µm². The postlayout simulation shows the critical path with a delay of 17 ns.</p>

Multiplication is an important part of real-time system applications. Various hardware parallel multipliers used in such applications have been proposed. However, when the operand sizes of the multipliers and the process technology need to be changed, the existing multipliers have to be redesigned. From the point of library cell reuse, this master thesis work aims at developing a module generator for parallel multipliers with the help of software programs. This generator can be used to create the gate-level schematic for fixed point two's complement number multipliers. Based on the generated schematic, the entire multiplier can be implemented by small manual intervention. This feature can reduce the time of chip design. The design phases consist of the logic, circuit and physical designs. The logic design includes gate-level schematic generation with C and SKILL programs and structural VHDL-code descriptions as well as validation. The circuit and physical design are custom in Cadence and the routing uses automatic place and route tools. To demonstrate the design method, an 18 by 18-bit modified Booth recoded multiplier was implemented in 0.18 µm CMOS process with a supply voltage of 1.2 V and simulated using simulator (Spectre). The number of integrated transistors is 13000 and the active area is 85000 µm2. The postlayout simulation shows the critical path with a delay of 17 ns.

No description available.

<p>As a part of a more extensive project of developing a new finishing line at the Bolivian door manufacturer Tecno Carpinteria San Pedro this thesis presents the development process for a special designed spray booth. The thesis covers every phase from a product idea to a final concept design.</p><p>Working with finishing of furniture and other wooden products can effect the workers health in a negative way and damage the environment. The final result of the manufactured door is also depending on the how well the ventilation system in the working area is. Because of these reasons it is important to use safety equipment and a good ventilation system in the working area. As a part of this new finishing line San Pedro is in need of a special designed spray booth to control the spread of paint particles and other hazard substances that is a result of the finishing process.</p><p>Together with the consultant firm CADEFOR a spray booth is designed and a proposal design is presented in this thesis. The result is a design built up with a dry filter solution together with an extractor that creates a cross draft airflow towards the rear part of the spray booth. The result of the project together with some recommendations of increasing the capacity in the finishing line are also presented.</p>

As a part of a more extensive project of developing a new finishing line at the Bolivian door manufacturer Tecno Carpinteria San Pedro this thesis presents the development process for a special designed spray booth. The thesis covers every phase from a product idea to a final concept design. Working with finishing of furniture and other wooden products can effect the workers health in a negative way and damage the environment. The final result of the manufactured door is also depending on the how well the ventilation system in the working area is. Because of these reasons it is important to use safety equipment and a good ventilation system in the working area. As a part of this new finishing line San Pedro is in need of a special designed spray booth to control the spread of paint particles and other hazard substances that is a result of the finishing process. Together with the consultant firm CADEFOR a spray booth is designed and a proposal design is presented in this thesis. The result is a design built up with a dry filter solution together with an extractor that creates a cross draft airflow towards the rear part of the spray booth. The result of the project together with some recommendations of increasing the capacity in the finishing line are also presented.

Indiana author Booth Tarkington laid the groundwork for understanding issues related to urban design and planning in the Midwest with a tandem of novels: The Magnificent Ambersons (1917), and The Midlander (1923). More importantly, evidence can be found to suggest that it is not only through knowledge and appreciation of tangible urban form, but also an appreciation and awareness of a culture, via its literature, that these issues of design and planning can be more fully understood by design professionals.The purpose of this study, then, is to discover the connections between studies in the field of landscape architecture (with regard to urban form and urban imageability) and the "literary landscapes" of Booth Tarkington. These connections will serve, first, to clarify and prioritize my study; second, to educate design professionals in an alternative way of understanding and tackling the physical issues of imageability in today's world; and third, to suggest to all designers the necessity for knowing, appreciating and utilizing the virtually infinite range of resources available to them. / Department of Landscape Architecture

Submitted by KARINE DUTRA ROCHA VIANA null (karidutra@hotmail.com) on 2016-06-19T02:37:36Z No. of bitstreams: 1 Dissertação Final Karine Dutra Rocha Viana.pdf: 4402952 bytes, checksum: 3f1548fe06e307d131540a1004d28153 (MD5) / Rejected by Ana Paula Grisoto (grisotoana@reitoria.unesp.br), reason: Solicitamos que realize uma nova submissão seguindo as orientações abaixo: Inserir a data de defesa na folha de aprovação. Corrija estas informações e realize uma nova submissão contendo o arquivo correto. Agradecemos a compreensão. on 2016-06-21T20:11:48Z (GMT) / Submitted by KARINE DUTRA ROCHA VIANA null (karidutra@hotmail.com) on 2016-06-21T21:52:47Z No. of bitstreams: 1 Dissertação final Karine Dutra R. V..pdf: 4401459 bytes, checksum: c5e75833e3c5ed0d475d1e8e2a27ead2 (MD5) / Approved for entry into archive by Ana Paula Grisoto (grisotoana@reitoria.unesp.br) on 2016-06-22T16:52:24Z (GMT) No. of bitstreams: 1 viana_kdr_me_arafcl.pdf: 4401459 bytes, checksum: c5e75833e3c5ed0d475d1e8e2a27ead2 (MD5) / Made available in DSpace on 2016-06-22T16:52:24Z (GMT). No. of bitstreams: 1 viana_kdr_me_arafcl.pdf: 4401459 bytes, checksum: c5e75833e3c5ed0d475d1e8e2a27ead2 (MD5) Previous issue date: 2016-06-09 / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / O objeto de pesquisa desta dissertação consiste em analisar, a partir da sociologia relacional de Pierre Bourdieu, como os discursos adotados pelas Escolas de Negócios (FGV-EAESP e Chicago Booth School of Business) contribuem para a consolidação de crenças dominantes no campo da Administração, e por qual motivo estes discursos são capazes de sensibilizar estudantes, majoritariamente provenientes de uma fração da elite do estado de São Paulo. Deste modo, busco trazer elementos das pesquisas empíricas desenvolvidas tanto no Brasil quanto nos EUA, de modo a estabelecer comparações principalmente entre os discursos e as crenças difundidas por estas Escolas. Assim, o estudo ora apresentado aponta que, para além da constatação de que tais instituições são formadas por agentes provenientes de uma elite educacional e econômica, situada principalmente no estado de São Paulo, é preciso considerar em que medida a posição profissional e as redes das quais estes agentes participam são capazes de criar e difundir crenças hegemônicas tanto no âmbito dos mercados quanto na formulação de ideias e teorias científicas no campo da Administração e da Economia. / The research object of this dissertation is to analyze, from the relational sociology of Pierre Bourdieu, how the discourse adopted by business schools (FGV-EAESP and Chicago Booth) contribute to the consolidation of dominant beliefs in the field of Administration, and for what reason these discourses are able to sensitize students, mostly from a fraction of the elite of the State of São Paulo in Brazil. In this way, I seek to bring elements of empirical research developed both in Brazil and in the USA, in order to draw comparisons between the discourses and the beliefs disseminated by these schools. Thus, the study presented here shows that, apart from the fact that such institutions are formed by agents from an educational and economic elite, located mainly in the state of São Paulo, one must consider to what extent the professional position and the networks of which these agents participate are able to create and disseminate hegemonic beliefs both in the markets and in the formulation of ideas and scientific theories in the field of Administration and Economics. / FAPESP: 2013/19448-1