Ce travail de thèse a été consacré au développement de nouvelles méthodologies de caractérisation des affinités intermoléculaires par le biais de la calorimétrie de titration isotherme (ITC), après validation de systèmes modèles par l'intermédiaire des spectroscopies UV-visible, RMN et de l'électrophorèse capillaire. Nous avons en particulier montré que la mise en place et le couplage d'expériences non conventionnelles avec les protocoles classiques permettait d'améliorer la caractérisation calorimétrique, avec notamment une diminution parfois spectaculaire des incertitudes liées aux paramètres thermodynamiques. Ce potentiel de l'analyse globale d'expériences différenciées a été évalué sur un plan théorique, permettant ainsi la définition et l'optimisation des expériences à mettre en oeuvre en fonction du type de complexe étudié. L'exploitation expérimentale de ces stratégies a également permis l'étude de complexations problématiques sur le plan analytique, dans le cadre de complexes impliquant des molécules telles que les cyclodextrines ou l'albumine, et s'inscrivant dans des applications liés aux domaines de l'environnement et de la santé. Ainsi, nos stratégies ont levé les difficultés liées aux complexes athermiques, aux complexes de faibles affinités, aux équilibres multiples et aux faibles solubilités de l'un ou l'autre des partenaires de la complexation. Enfin, l'évaluation d'un nouveau modèle de traitement thermo-cinétique du thermogramme ITC a été réalisée, accroissant encore le potentiel de cette technique vis-à-vis de la caractérisation des interactions moléculaires. / This work was dedicated to the development of new isothermal titration calorimetry (ITC) methodologies for the characterization of intramolecula affinities, after validation of model system via capillary electrophoresis, UV-visible and NMR spectroscopy. We have demonstrated that the coupling of unconventional experiments with the conventional protocols generally improves the calorimetric characterization, with a dramatic decrease of the uncertainties on thermodynamic parameters. The potential of global analysis applied to differentiated experiments was evaluated on a theoretical level, allowing the definition of optimal experiments, depending on the type of studied complex. These strategies also enabled, on a experimental point of view, the study of complexations which cannot be analyzed by conventional approaches, in the case of complexes involving cyclodextrins or albumin. Indeed, our strategies overcomes the difficulties associated with athermic complexes, with complexes of low affinity, with multiple equilibria and with the low solubility of interacting partners. Finally, the evaluation of a new thermo-kinetic treatment of ITC thermograms has been achieved, further increasing the potential of this technique in the characterization of molecular interactions.

No description available.

In dieser Arbeit wird das neue Prinzip der „Selbstinkompatiblen Lösungsmittel“ vorgestellt. Es wird theoretisch abgeleitet, dass eine Mischung aus zwei Substanzen mit ungünstigen Wechselwirkungen bereitwillig eine weitere Substanz aufnehmen sollte, die diese ungünstigen Wechselwirkungen durch Verdünnen vermindert. Dies sollte umso stärker ausgeprägt sein, je ungünstiger die Wechselwirkungen zwischen den beiden ersten Substanzen sind. Da sich jedoch Substanzen mit sehr ungünstigen Wechselwirkungen physikalisch nicht mischen, entstand die Idee, diese Substanzen durch eine kovalente Bindung aneinander zu binden. Ein solches Molekül, das aus zwei inkompatiblen Hälften besteht, wird im Folgendem Selbstinkompatibles Lösungsmittel genannt. Die in dieser Arbeit gewählten Substanzen zeigen mäßige Inkompatibilität, deshalb ist ein Vergleich zwischen einfachen physikalischen Mischungen und kovalent verknüpften Molekülhälften noch möglich. Dieses Prinzip wird für binäre und ternäre Mischungen quantitativ berechnet und experimentell in drei Serien von Experimenten bestätigt: i) unter Verwendung von Lösungskalorimetrie und Bestimmung der Wechselwirkungsparameter zwischen Komponente 3 und einer bereits hergestellt physikalischen binären Mischung aus Komponente 1 und 2, ii) unter Verwendung von Lösungskalorimetrie und Bestimmung der Wechselwirkungsparameter zwischen Komponente 3 und den selbstinkompatiblen Losungsmitteln, die den in (i) gewählten Mischungen entsprechen und iii) aus der Sättigungslöslichkeit der Komponente 3 in den entsprechenden selbstinkompatiblen Lösungsmitteln. In diesen drei verschiedenen Messserien wird stets der gleichen Trend beobachtet: Die Selbstinkompatibilität eines Lösungsmittels begünstigt den Lösevorgang. / In this thesis a new principle of Self Incompatible Solvent is introduced. It is shown theoretically that a preexisting mixture of two substances (compound 1 and 2) with unfavorable interactions will readily dissolve a third compound because it diminishes the unfavorable interaction between the compound 1 and 2 by dilution. This behavior should be the stronger the more unfavorable the interactions between compound 1 and 2 are. However, substances with strong unfavorable interactions will not mix. Therefore the idea pursued here is to enforce the desired preexisting mixture for example by linking compound 1 covalently to compound 2. Such a molecule that is composed of two incompatible parts is called Self Incompatible Solvent in this work. In this thesis examples of incompatible compounds that show moderate incompatibility are chosen, therefore it was possible to do a comparison between simple physical mixtures and covalently linked incompatible molecules. The theoretical prediction of the theory is compared with experiments. This principle is calculated quantitatively for binary and ternary mixtures and compared with the experimental results in three distinct series of experiments: i) by using solution calorimetry and calculation of the interaction parameters between compounds 3 and the preexisting binary mixture of compound 1 and 2, ii) by using solution calorimetry and calculation of the interaction parameters between compound 3 and the Self Incompatible Solvent that correspond to the mixtures used in (i) and iii) from the saturation solubility of compound 3 in the Self Incompatible Solvent. The results obtained from the theoretical prediction and these obtained from the three different series of experiments show the same trend: the self incompatibility of the solvent improves the dissolution process.

Multidimensional characterization of polyelectrolytes and interpolyelectrolyte complexes in aqueous solutions Abstract: This PhD thesis is dedicated to the study of polyelectrolytes and their self-assembly in aqueous solutions. The morphology and ionization state of individual polymer chains were investigated as well as their co-assembly with oppositely charged species. First, the charge regulation of short and long weak polyelectrolytes in aqueous solution was investigated to deeper understand their pH-responsive properties. The changes of ionization degree and charge of oligopeptides composed of 5 amino acids with acid side-chains and 5 with basic side chains were followed upon varying the pH in order to reveal the effect of interactions between the like-charged and oppositely charged groups. It was shown that intra-molecular electrostatic interactions and conformational flexibility caused the suppression of the total charge and enhancement of ionization of the peptides. To get an insight into the distribution of local H+ concentration in the proximity of a polyelectrolyte chain, a modified polyelectrolyte structure was used with a fluorescent pH- indicator, covalently attached at the end of the chain. Ionization of the pH-responsive fluorophore revealed its effective pK which was compared with the local...

Gegenstand der vorliegenden Arbeit ist die polymeranaloge Reaktion von chromophoren Aryl-boronsäuren mit 1,2-Diol-basierenden Methacrylat-Copolymeren. Über die Herstellung der dafür benötigten Ausgangsverbindungen sowie deren Charakterisierung mit Hilfe spektroskopischer und thermischer Analysemethoden wird zunächst umfassend berichtet. Hierbei ist u.a. die Auf-klärung der in den Copolymeren aus n-Butylmethacrylat (BMA) und 2,3-Di-hydroxypropylmethacrylat vorliegenden Polymerkonstitution von Interesse. Als chromophore Grundkörper der Arylboronsäuren wurden Indanon- sowie Tricyanofuran-Derivate, aber auch ausgedehnte Elektronensysteme mit einem Nitro- bzw. Cyano-Akzeptor verwendet. Bei der Synthese immobilisierter Arylboronsäuren wurde einerseits das chromophore Elektronensystem variiert. Andererseits wurden mit einer ausgewählten chromophoren Arylboronsäure verschiedene Funktionalisierungsgrade am Copolymer eingestellt bzw. Copolymere mit unterschiedlichem BMA-Anteil mit einem Funktionalisierungsgrad von 60 % bezogen auf die vorhandenen Diol-Einheiten funktionalisiert. Die optischen Eigenschaften der immobilisierten chromophoren Arylboronsäuren wurden mit der UV/vis-Spektroskopie untersucht. Der Einfluss des Funktionalisierungsgrades sowie des variablen BMA-Anteils auf die thermischen Eigenschaften wurde mittels DSC und TGA studiert. Weiterhin erfolgten an den immobilisierten chromophoren Arylboronsäuren Untersuchungen hinsichtlich des Komplexbildungsverhaltens gegenüber Fluorid-Ionen. Ein besonderes Augenmerk wurde hier auf den Einfluss der BMA-Einheiten auf die Zugänglichkeit der Bor-Atome sowie die Wechselwirkung mit vorhandenen Diol-Einheiten gelegt.

Influenza A is involved in hundreds of thousands of deaths globally every year resulting from viral infection-related complications. Previous efforts to subdue the virus by preventing proper function of wild-type (WT) neuraminidase (N), and M2 proteins using oseltamivir and amantadine (AMT) or rimantadine (RMT), respectively, exhibited success initially. Over time, these drugs began exhibiting mixed success as the virus developed drug resistance. M2 is a proton channel responsible for the acidification of the viral interior which facilitates release of the viral RNA into the host. M2 has a His37-tetrad that is the selective filter for protons. This protein has been demonstrated to be a feasible target for organic compounds. However, due to a mutation from serine to asparagine at residue 31 of M2, which is found in the majority of influenza strains circulating in humans, AMT and RMT block is insufficient. From simulations, it is unclear whether the insensitivity results from weak binding or incomplete block. The question of how the S31N mutation caused MT and RMT insensitivity in M2 is addressed here by analyzing the binding kinetics of AMT and RMT using the two-electrode voltage clamp electrophysiology method. The dissociation rate constant (k2) is dramatically increased compared to WT for both AMT and RMT, by 1500-fold and 17000-fold respectively. Testing of AMT at 10 mM demonstrates complete block, albeit weak, of the S31N M2 channel. At 10 mM, RMT does not reach complete block even though the binding site is saturated. When RMT is in the bound state, it is not blocking all the current, and is binding without block. These results motivated the development of novel M2 blockers using copper complexes focusing on the His37 complex in M2. I hypothesized that copper complexes would bind with the imidazole of a histidine in the His37 complex and prevent proton conductance. The His37 complex is highly conserved in the M2 channel and, therefore, would be important target for influenza therapeutics. By derivatizing the amines of known M2 blockers, AMT and cyclooctyalmine, to form the iminodiacetate or iminodiacetamide, we have synthesized Cu(II) containing complexes and characterized them by NMR, IR, MS, UV–vis, and inductively coupled plasma mass spectroscopy (ICP-MS). The copper complexes, but not the copper-free ligands, demonstrated H37-specific blocking of M2 channel currents and low micromolar anti-viral efficacies in both Amt-sensitive and Amt-resistant IAV strains with, for the best case, nearly 10-fold less cytotoxicity than CuCl2. Isothermal titration calorimetry was used to obtain enthalpies that showed the copper complexes bind to one imidazole and curve fitting to the electrophysiology data provided rate constants for binding in the M2 channel. Computational chemistry was used to obtain binding geometries and energies of the copper complexes to the His37-tetrad. The results show that the copper complexes do bind with the His37 complex and prevent proton conductance and influenza infection.

Lithiumeisen(II)-phosphat ist ein vielversprechendes und umweltfreundliches Kathodenmaterial für den Einsatz in Lithium-Ionen-Batterien (LIB), das eingehend im Hinblick auf seine thermodynamischen- und Oberflächeneigenschaften untersucht wurde. Zur Bestimmung der mittleren molaren Mischungsenthalpie von LiFePO4 und FePO4 wurde die Methode der isothermen Titrationskalorimetrie für die Untersuchung heterogener Stoffsysteme optimiert. Die Ergebnisse konnten mit elektrochemischen Gleichgewichtszellspannungsmessungen validiert werden. Ferner wurde die Oberflächenspannung von reinem LiFePO4 experimentell mit Hilfe der Kapillar-Aufstiegsmethode an Pulvern ermittelt. Ein weiterer Forschungsschwerpunkt stellte experimentelle Bestimmung der Wärmekapazität von phasenreinem orthorhombischen FePO4 dar. Des Weiteren wurde der Ablauf der hydrothermalen LiFePO4-Synthese ausgehend von Li3PO4 und Vivianit anhand von in-situ Messungen der elektrolytischen Leitfähigkeit und thermodynamischen Modellierungen aufgeklärt.

Nous nous sommes intéressés dans ce travail à l’étude du vieillissement physique d’un non-tissé fabriqué à l’aide de fibres textiles issues du recyclage de bouteilles plastiques selon le procédé par voie sèche. L’application de ce non-tissé est l’isolation thermique des bâtiments français. Après avoir mis en évidence la présence de deux réseaux de fibres, nous nous sommes intéressés au phénomène de relaxation structurale. Le vieillissement physique du non-tissé étant régi par l’enrobage d’une des fibres utilisées dans la fabrication de celui-ci, nous avons observé l’évolution de l’enthalpie de relaxation en fonction de différents couples temps de vieillissement, écart de température par rapport à sa température de transition vitreuse. Les résultats ont mis en évidence un état d’avancement du mécanisme de relaxation quasi-nul pour des températures très éloignées de la température de transition vitreuse de l’enrobage. L’évolution de cette même enthalpie de relaxation a été étudiée pour différents non-tissés issus de différents lots de fabrication des cinq dernières années. Il a été mis en évidence un mécanisme de relaxation lent dans les conditions expérimentales nous rassurant quant à la stabilité du produit fini dans le temps. / We focused on physical ageing of a non-woven produced by recycled fibers from plastic bottles. This non-woven is produced by drylaid-textile process and is used for building thermal insulation. Two networks are visible and structural relaxation has been investigated through the study of evolution of one fiber skin part with different couple time, temperature. Physical ageing of polymers can be followed by structural relaxation process. We showed that structural relaxation process is very long for temperatures of use far from glass transition temperature. Same results have been shown on the global non-woven stored in non-insulated box governed by Normandy weather. The combination of the two previous results reinforce our basic idea ; the insulator properties variation will be stable for long time only if temperature of use is far from glass transition temperature.

Dans le cadre de cette thèse, nous avons réalisé l’étude de systèmes amorphes moléculaires chiraux en évaluant leur vieillissement, leur mobilité ainsi que leur capacité à recristalliser en fonction de la composition énantiomérique du matériau. Pour limiter les facteurs additionnels à la chiralité, ce travail s’est concentré sur des systèmes modèles formant des conglomérats stables : N-acetyl-α-methylbenzylamine (Nac-MBA) et 5-ethyl-5-methylhydantoin (12H). De ces travaux il ressort que l’impact le plus spectaculaire de la chiralité est exprimé dans la propension à la cristallisation ou l’habilité à former un verre (qui augmente de façon inversement proportionnelle de l’excès enantiomérique (ee)). Les cinétiques de vieillissement sont implicitement impactées par l’ee : Celles-ci sont plus lentes pour les ee importants. Enfin, il semble que les processus de relaxation ainsi que les temps associés soient identiques quelle que soit l’ee, bien que le comportement à la cristallisation soit lui significativement impacté. A noter que la signature la plus manifeste de la chiralité dans l’état amorphe du Nac-MBA s’exprime dans l’intensité diélectrique des processus D et α. / In the framework of this thesis, we carried out the study of amorphous chiral molecular systems by evaluating their molecular mobility, the evolution of physical properties during aging and the recrystallization behavior as function of the initial enantiomeric excess (ee). In order to avoid factors additional to chirality itself, we focused on enantiomeric systems forming stable conglomerates (full chiral discrimination in the solid state) by choosing two model compounds: 5-ethy-5-methylhydantoin (12H) and N-acetyl-α-methylbenzylamine (Nac-MBA). From this thesis it was shown that the most spectacular effects of chirality in the amorphous state is expressed in the GFA or the crystallization propensity. The GFA increases as the ee decreases. The kinetics of physical aging is implicitly impacted by chirality. Glassy pure enantiomer requires more time to reach equilibrium than that of an intermediate composition. This situation is hypothetically due to constraints effects mostly resulting from a strong nucleation behavior in the glass state at high ee. Furthermore, the time scale of all the processes (D, α, βJG, γ) and the evolution of their temperature dependency are approximatively identical even though the crystallization behavior is highly impacted by ee. it seems that molecular mobility would not be a key parameter in the crystallization behavior of Nac-MBA. The main expression of chirality in amorphous Nac-MBA is evidenced in the signature of the dielectric strength of both D and α processes.

Indiana University-Purdue University Indianapolis (IUPUI) / Background: Elucidating the lithium disilicate system like the popular IPS e.max® CAD (LS2), made specifically for Computer-Aided Design and Computer-Aided Manufacturing (CAD-CAM), as a function of temperature unravels new ways to enhance material properties and performance. Objective: To study the effect of various thermal processing on the crystallization kinetics, crystallite microstructure, and strength of LS2. Methods: The control group of the LS2 samples was heated using the standard manufacturer heating-schedule. Two experimental groups were tested: (1) an extended temperature range (750-840 °C vs. 820-840 °C) at the segment of 30 °C/min heating rate, and (2) a protracted holding time (14 min vs. 7 min) at the isothermal temperature of 840 °C. Five other groups of different heating schedules with lower-targeted temperatures were evaluated to investigate the microstructural changes. For each group, the crystalline phases and morphologies were measured by X-ray diffraction (XRD) and scanning electron microscope (SEM) respectively. Differential scanning calorimeter (DSC) was used to determine the activation energy of LS2 under non-isothermal conditions. A MTS universal testing machine was used to measure 3-point flexural strength and fracture toughness, and elastic modulus and hardness were measured by the MTS Nanoindenter® XP. A one-way ANOVA/Tukey was performed per property (alpha = 0.05). Results: DSC, XRD, and SEM revealed three distinct microstructures during LS2 crystallization. Significant differences were found between the control group, the two aforementioned experimental groups, and the five lower-targeted-temperature groups per property (p<0.05). The activation energy for lithium disilicate growth was 667.45 (± 28.97) KJ/mole. Conclusions: Groups with the extended temperature range (750-840 °C) and protracted holding time (820-840 °C H14) produced significantly higher elastic-modulus and hardness properties than the control group but showed similar significant flexural-strength and fracture-toughness properties with the control group. In general, explosive growth of lithium disilicates occurred only when maximum formation of lithium metasilicates had ended.