The present study suggests new insights into topographic characterisation of engineering polymer surfaces towards to physical-chemical and mechanistic understanding of wetting phenomena on rough surfaces. Non-contact chromatic confocal imaging was chosen and justified as the optimal measuring method to study and correlate surface topography and surface properties of Sheet Moulding Compounds (SMC) as well as polyester and cotton fabrics. Before topographical characterisation, an adequate selection of optimal sampling conditions (cut-off length and resolution) were done by a systematic procedure proposed for periodic and non-periodic surfaces. Topographical characterisation of the surfaces was realized by an innovative methodology, separately considering different length scales in dependence on the surface morphologies of the materials. For SMC materials, the influence of moulding conditions (pressure, moulding time, metallic mold topography, metallic mold form, prepregs placement procedure, glass fibres content and orientation) on resulting macro-, meso- and micro-topography was studied. A model to conceptualize the influence of the most important moulding conditions on topographic characteristics and, as a consequence, on the quality of the resulting surface was presented. To quantify the effect of surface modification, a new parameter (Surface Relative Smooth) was suggested, developed and validated, which can be used for the characterisation of changes due to surface modifications for every solid material. A very important and innovative part of the present study is the development of new concepts for topographic characterisation of textile materials using different length scales, that makes possible to consider and analyse separately their specific morphologies caused by weave, yarn and filament/fibres, and to investigate the influence of topography on wettability by modification processes, e.g. construction parameters, thermosetting, impregnation with Soil Release Polymers (SRP) and wash-dry cycles. The present study showed, how construction parameters of polyester textiles, such as fineness of filaments and yarn, warp and weft densities as well as the type of weave, control the surface topography - characterised as meso-porosity (spaces between yarns) and micro-porosity (spaces between filaments) - and as a consequence strongly influence their capillarity. On the basis of experimental results, revealing differences in three basic types of woven fabrics – plain, twill and Panama – in respect to water penetration, the concept of an innovative novel wicking model was developed. Additionally, the influence of thermosetting and impregnation of polyester fabrics with Soil Release Polymers on topography, wetting and cleanability of three woven plain polyester fabrics, having different wefts, were studied. To characterise the soiling behaviour, an ‘spot analysis method’ was suggested, allowing wetting dynamics studies of liquids on fabrics with anisotropic surface properties. This method is applicable also to surfaces with anisotropic roughness characteristics and to porous media. The effect of wash-dry cycles on topography, spreading, wetting and soiling of woven plain and knitted cotton fabrics was in addition investigated. In all cases studied, the topographical characterisation and interpretation of results on different length scales contributed to a better understanding of wetting phenomena. A mathematical model for a virtual construction of textile surfaces to predict effects resulting from topographic changes on the behaviour of polymer and textiles surfaces was developed. Woven plain textiles and SMC surfaces were mathematically synthesized by a combination of various harmonic waves, i.e. Fourier synthesis. Topographic and technical construction parameters were taken into account to build their virtual topographies. In the case of textile surfaces, the effect of wash-dry cycles for cotton fabrics and thermosetting of polyester fabrics on their meso- and micro-morphology was investigated on the basis of the real topography of a given textile surface. The model allows to predict changes in the porosity of resulting textile materials, their wettability and soiling behaviour. The method presented provides possibilities to simulate controlled changes in textile construction parameters and to study their effect on the resulting topography. / Die vorliegende Arbeit vermittelt neue Einblicke in die topographische Charakterisierung technisch relevanter Polymeroberflächen mit dem Ziel, die Mechanismen der Benetzungsphänomene auf rauen Oberflächen besser zu verstehen. Eine 3D-Abbildung der Oberflächentopographie wurde mit einem konfokalen Mikroskop mit chromatischer Kodierung zwecks optimaler Charakterisierung duromerer Verbundwerkstoffsystemen (SMS: Sheet Moulding Compounds) sowie Polyester- und Baumwolltextilien berührungsfrei durchgeführt. Zur topographischen Oberflächencharakterisierung wurde eine systematische Prozedur vorgeschlagen, welche es erlaubt, eine entsprechende Auswahl von optimalen Messbedingungen, wie die Bewertungslänge (cut-off length) und Auflösung, für Oberflächen mit periodischer und nicht-periodischer Rauheit zu treffen. Die topographische Charakterisierung von Oberflächen wurde methodologisch weiter entwickelt, indem die Oberflächen auf verschiedenen Längenskalen je nach Morphologie untersucht werden können. Für duromere Verbundwerkstoffsysteme wurde der Einfluss von den Bedingungen des Formpressens (Druck, Zeit, Topographie und Form des metallischen Werkzeugs, Einbringen des Prepregs, Glasfasergehalt und -orientierung) auf die resultierende makro-, meso- und mikroskopische Topographie studiert. Eine modellmäßige Beschreibung des Einflusses der wichtigsten Charakteristiken des Herstellungsprozesses duromerer Verbundwerkstoffsysteme auf ihre topographische Charakteristiken und demzufolge auf die Qualität des Endproduktes wurde konzipiert. Zur Quantifizierung des Effekts der Oberflächenmodifizierung wurde einen neuen Parameter – Surface Relative Smooth – vorgeschlagen und dessen Nutzung für jedes beliebige Feststoffkörpers verifiziert. Das Hauptaugenmerk bei der Durchführung der Arbeit wurde auf die Entwicklung neuer Konzepte zur topographischen Charakterisierung textiler Materialien gelegt, welche die Nutzung mehrerer Längenskalen in Betracht ziehen. Dies ermöglicht die spezifische Morphologien textiler Strukturen zu berücksichtigen und jede Struktur, welche durch die Gewebeart, die Art der Fasern und des Garns entstanden ist, gesondert bezüglich ihr Einflusses auf die Benetzbarkeit infolge der Modifizierung (Konstruktionsparameter, Thermofixierung, Imprägnierung mit Soil-Release- Polymeren, Waschen/Trocknen-Zyklen) zu analysieren. In der vorliegenden Arbeit wird gezeigt, wie die Konstruktionsparameter von Polyestertextilien, wie z.B. die Filament- und Garnfeinheit, Kett- und Schussdichte sowie die Gewebebindung Einfluss auf die Oberflächentopographie und als Folge auf ihre Kapillarität nehmen, und zwar als Mesoporosität (Abstände zwischen Garnwindungen) und als Mikroporosität (Abstände zwischen einzelnen Filamenten). Auf der Basis von umfangreichen experimentellen Daten, welche die Unterschiede zwischen verschiedenen Bindungsarten (Leinwand, Köper, Panama) offenbaren, wurde ein neues Modell zur Beschreibung der Penetration von Flüssigkeiten in die textile Strukturen entwickelt. Außerdem wurde der Einfluss der Thermofixierung und Imprägnierung von Polyester Materialen mit Soil-Release-Polymeren auf die Topographie, Benetzbarkeit und Auswaschbarkeit für die drei wichtigsten Gewebearten untersucht, welche die gleiche Anzahl von Schussfäden haben. Für die Charakterisierung des Anschmutzungsverhaltens von Textilen wurde eine so genannte Fleck-Analysierungsmethode (spot analysis method) vorgeschlagen, welche es erlaubt, benetzungsdynamische Eigenschaften von Flüssigkeiten an Oberflächen mit anisotroper Topographie zu studieren. Diese Methode ist geeignet auch für Oberflächen mit anisotropen Rauheitsstrukturen und für poröse Materialien. Der Effekt von Waschen/Trocken-Zyklen auf die Topographie, Spreitung, Benetzung und Anschmutzung von Leinwandgewebe und Gestricke aus Baumwolle wurde zusätzlich untersucht. In allen Spezialfällen diente die topographische Charakterisierung und die Interpretation der Ergebnisse auf verschiedenen Längenskalen zur besseren Verständnis von Benetzungsphänomenen. Ein mathematisches Modell für die virtuelle Konstruktion von textilen Oberflächen wurde entwickelt, die das Studium der Effekte infolge topographischer Änderungen auf das Verhalten von Polymer- und Textiloberflächen ermöglicht. Oberflächen von Leingeweben und duromeren Verbundwerkstoffsystemen wurden mit der Fourier-Synthese unter Zuhilfenahme verschiedener harmonischer Wellen mathematisch abgebildet. Die Topographie- und Konstruktionsparameter wurden bei der Fourier-Synthese zur Konstruktion virtueller Topographien genutzt. Im Falle der textilen Materialein wurde der Effekt von Waschen/Trocknen-Zyklen für die Baumwolltextilien sowie der Thermofixierung von Polyestertextilien auf ihre Meso- und Mikromorphologie auf der Basis gemessener Parameter für jede Topographie modelliert. Dieses Modell erlaubt auch die Vorhersage der Änderungen in der Porosität von resultierenden textilen Strukturen, ihres Benetzungs- und Anschmutzungsverhaltens. Mit dieser Methode ist es möglich, gewünschte Änderungen von textilen Konstruktionsparametern einzustellen und ihre Effekte auf die Topographie zu untersuchen.

No description available.

A novel constitutive characterization method for uncured rubber behaviour has been developed in this article. A systematic measuring procedure was designed to fully investigate the uncured rubber complex stress–strain behaviour under different deformation patterns, which integrated three kinds of tests – the uniaxial tensile, the compression test and the shear test. It can be found from the observed behaviour that the uncured rubber has similar but much pronounced non-elastic stress–strain relationship, which is highly non-linear and highly rate dependent. A generalized Maxwell model with modified Yeoh model is developed to constitutively describe the observed phenomena in which parameters are identified by an evolution optimization scheme. Good agreement can be found between the model and the test data. Another finding is that, similar to vulcanized rubber, multi-test data are needed to obtain compatible constitutive models. The test results, findings and the developed model help rubber engineers deeply understand the uncured rubber’s mechanical behaviour and provide a base for rubber manufacturing simulation.

Die ausWestafrika stammende Ölpalme (Elaeis guineensis Jacq) ist zur populärsten Kulturpflanze in Südostasien geworden. Als Haupterzeugnisse dieser Pflanze gelten die Öle der Früchte und der Fruchtkerne. Die weltweite Nachfrage nach diesen beiden Haupterzeugnissen nimmt sehr rasch zu. Ursache hierfür ist die breite Anwendungspalette dieser Pflanzenöle, wie z.B. Bratöl, ölbasierte Chemikalien und ölbasierte Nahrungsmittel, Kosmetika, Waschmittel, Biobrennstoff usw. Indonesien und Malaysia sind die Hauptproduzenten und Hauptlieferanten solcher Produkte und decken über 85% des weltweiten Bedarfs. Mit Extensivierung der Ölpalmplantagen sehen sich die Erzeugerländer zunehmend mit ernstzunehmenden Umweltprobleme konfrontiert, da nach Erreichen der wirtschaftlichen Lebenspanne (Umtriebszeit) von 25 Jahren große Mengen an festen, biologischen Abfallstoffe bei der Neubegründung der Bestände anfallen. So sollen z.B. im Jahre 2010 laut Vorhersagen mehr als 20 Mill. Kubikmeter Ölpalmen- Holz jährlich anfallen... / Oil palm (Elaeis guineensis Jacq) becomes the most popular crop, especially in Southeast Asia, than its origin,West Africa. World demand of two main products from this crop (e.g. crude palm oil and palm kernel oil) increases very rapidly, due to very wide ranges use of these vegetable oils for industrial purposes, such as fried oil, oleo-chemical and -food, cosmetics, detergent, biofuel and etc. Indonesia and Malaysia are the main producers and supplying more than 85% of world consumption. On the other hand, due to the economic life span of this popular crop (25 years), the producer countries have been facing a serious environmental problems concerning to the solid biowaste handling of oil palm industry, particularly the oil palm trunk after replanting activity. Starting 2010, it is predicted that more than 20 millions cubic meter biomass from oil palm trunk available annually...

The thesis aims to synthesize hyperbranched poly(urea-urethane) polymers (HPU) in one-pot method using commercially available monomers which are 2,4-toluylene diisocyanate (TDI) as aromatic diisocyanate and isophorone diisocyanate (IPDI) and 2(3-isocyanatopropyl) cyclohexylisocyanate (IPCI) as aliphatic diisocyanates. Those proposed diisocyanates were reacted with diethanolamine (DEA) or diisopropanolamine (DIPA). Conditions of polymerisation reactions were optimised. Complete structural analysis using 1H and 13C NMR for the obtained aromatic polymers was carried out. Degree of branching up to 70% was calculated. Aliphatic polymers have spectra with overlapped signals therefore, no full structural analysis was possible. Molar masses were determined using SEC/RI detector which shows that the prepared polymers have Mw values between 1600 g/mol and 106000 g/mol. Thermal analysis for different polymer systems showed that aliphatic HPU are more thermally stable and have values of glass transition temperature higher than aromatic ones. Modification of the end groups in the prepared hyperbranched polymers was carried out using three different modifiers and degree of modification up to 100%. Linear polymers based on the same diisocyanate monomers were prepared to compare the properties of hyperbranched systems with their linear analogs. Measurements of solution viscosity showed that HPU have lower solution viscosity values than their linear analogs of comparable molar masses. Rheological measurement of some polymer samples of different systems were carried out and showed that our hyperbranched systems exhibit a more elastic behavior than the linear polymers. Surface studies for thin films prepared from different polymer systems (hyperbranched, linear and modified) were carried out and the obtained thin films were characterized using light microscope, microglider, GC-MS, and AFM. Contact angle measurements showed that HPU have a relatively hydrophilic character. The modified polymers have higher contact angle values than the unmodified ones due to the lack of OH end groups. Networks based on aliphatic and aromatic HPU were prepared through the reaction of HPU with trimer of 1,6-diisocyanatohexane and characterised by DSC, GC-MS, DMA and AFM. The domain size in aromatic networks was found to be larger than in aliphatic networks. Tensile test was carried out and it was found that aliphatic network is more elastic than aromatic one.

Nowadays, our daily live concerns the usage of Information Technology, increasingly. As a result, a huge amount of data has to be processed which is outsourced from local devices to data centers. Due to fluctuating demands these are not fully utilized all the time and consume a significant amount of energy while idling. A common approach to avoid unnecessary idle times is to consolidate running services on a subset of machines and switch off the remaining ones. Unfortunately, the services on a single machine interfere with each other due to the competition for shared resources such as caches after the consolidation, which leads to a degradation of performance. Hence, data centers have to trade off between reducing the energy consumption and certain performance criteria defined in the Service Level Agreement. In order to make the trade off in advance, it is necessary to characterize services and quantify the impact to each other after a potential consolidation. Our approach is to use random variables for characterization, which includes the fluctuations of the resource consumptions. Furthermore, we would like to model the interference of services to provide a probability of exceeding a certain performance criterion.

Al–O monolayers embedded in ultrathin SiO₂ were shown previously to contain Al-induced acceptor states, which capture electrons from adjacent silicon wafers and generate a negative fixed charge that enables efficient Si-surface passivation. Here, we show that this surface passivation is just in part attributed to field-effect passivation, since the electrically active interface trap density Dit itself at the Si/SiO₂ interface is reduced by the presence of the acceptor states. For sufficiently thin tunnel-SiO₂ films between the Si-surface and the Al–O monolayers, Dit is reduced by more than one order of magnitude. This is attributed to an interface defect deactivation mechanism that involves the discharge of the singly-occupied dangling bonds (Pb0 defects) into the acceptor states, so that Shockley-Read-Hall-recombination is drastically reduced. We demonstrate that the combined electronic and field-effect passivation allows for minority carrier lifetimes in excess of 1 ms on n-type Si and that additional H₂-passivation is not able to improve that lifetime significantly.

Spider silk is one of the most fascinating materials found in nature. Besides its properties like biodegradability, low immunoreactivity, and biocompatibility, especially the mechanical properties outperforming today’s artificial high-tech materials like Kevlar® are of great interest in biomedicine or material science. Spider silk comprises highly repetitive amino acid sequence motives, whose structure is accepted to be responsible for the extraordinary properties of spider silk. Typically, hydrophilic sequence motives alternate with hydrophobic ones making spider silk proteins resemble block copolymers. Additionally, the simple amino acid sequence and the possibility to form fibrillar structures are common characteristics of spider silk proteins as well as intrinsically disordered proteins (IDP) or protein regions (IDR). Both are suspected of being involved in the development of certain neurodegenerative diseases like Alzheimer´s disease. These aspects open promising possibilities of the use of spider silk proteins in nanotechnology, but also as model systems for the fibrillization processes of IDPs and IDRs, which are still unresolved today. Currently, most of the research and application is focused on 1-dimensional spider silk protein fibrils and fibers or 0-dimensional spider silk particles. However, 2-dimensional spider silk protein films or porous 3-dimensional objects are highly relevant platforms with the potential for cell-supporting scaffolds, biodegradable electrolyte materials in transistors, or e.g., planar drug-eluting implant coatings. Generally, the effects of sequence-based and external influences on the self-assembly and folding of spider silk proteins have not yet been fully elucidated in all of these various dimensional spider silk materials, even concerning IDP and IDR models. Thus, basic research regarding assembly and folding processes is still needed, especially in films. Particularly, 2-dimensional films allow a broad spectrum of (surface) analytical techniques, from whose outcome general structure-property relations of spider silk materials across all material dimensions can be obtained. In this work, engineered spider silk proteins, which are based on the consensus sequence motives in the spider silk fibroin (spidroin) 3 and 4 of the European garden spider Araneus diadematus (eADF4(Cx), eADF3(AQ)x, eADF3(QAQ)x) as well as blends of two short peptides with the respective aa sequence of the hydrophobic (pep-c) and hydrophilic (pep-a) part of eADF4(Cx) proteins were used. Spider silk-related proteins and peptides were dissolved in 1,1,1,3,3,3-hexafluoroisopropanol or formic acid, processed as thin films, and post-treated with methanol vapor to induce β-sheet formation. Dichroic FTIR-spectroscopy was used, a powerful tool for studying protein secondary structure formation and orientation. Proteins reveal characteristic amide bands, which are highly sensitive to the conformation of the protein backbone. In the course of this work, a set of components for the line shape analysis (LSA) of the Amide I band was developed. Therby, each component was assigned to a typical secondary structure allowing a quantitative determination of the respective portions and their structural orientation. Quantitative secondary structure portions and their orientation could be determined on this basis. Furthermore, a comprehensive study of folding and self-assembly-influencing parameters like hydrophobic and hydrophilic sequences, molecular weight, the repeating sequence motive order, the film thickness, surface topography, and the surface chemistry in engineered spider silk protein and spider silk protein-based films was carried out. In general, methanol vapor post-treatment induced the formation of β-sheet structures in all films, causing phase separation and the formation of spherical and filamentous structures. The phase separation upon post-treatment was influenced by the covalent connectivity between hydrophobic and hydrophilic sequence parts as well as the repeating sequence motives. In thin films, the increased flexibility of shorter peptides enabled the formation of multipack filaments instead of spherical structures, which were formed by higher molecular weight proteins with several inter-connected repeating sequence motives. Stamping wrinkled structures using poly(dimethylsiloxane) substrates was possible. Filamentous structures were successfully assigned to β-sheet rich structures using infrared nanospectroscopy for the first time. Further, enhanced surface hydrophobicity led to the clustering of β-sheet filaments. The β-sheet content could be controlled by the amount of hydrophobic sequences in thin films. With a higher amount of hydrophobic sequences in the proteins or blends, the β-sheet content increased until a maximum β-sheet content of around 60% was reached. Additionally, β-sheet formation could be suppressed by increasing substrate hydrophobicity or by decreasing the number of repeating sequence motives by going from protein-like folding to peptide-like self-assembly. The backfolding of proteins with covalently linked repeating sequence motives further promoted the formation of more antiparallel β-sheets. Antiparallel β-sheet formation was also favored when the portion of the hydrophilic, amorphous phase was increased. Micrometer thick films did not reveal any preferred alignment of β-sheets, while a general out-of-plane orientation of β-sheets could be obtained in all thin protein, peptide, and blend films. Z-axial orientation in films was increased by using short pep-c and pep-a peptides, higher molecular weight proteins or the deposition of monolayered films instead of thin multilayered films. Also, increased hydrophilicity of the substrate promoted the alignment of β-sheets perpendicular to the substrate surface. The folding kinetics and final domain size were found to be directly correlated. The amount of hydrophobic phase, backfolding, and increased flexibility due to low chain lengths increased the folding kinetics and led to smaller domain sizes. Thus, competing effects of backfolding and flexibility of the protein/peptide backbone could be rationalized. The film integrity and water contact angle were directly related to the β-sheet content and the molecular weight. Beyond the classical protein conformation and orientation analysis, the possibilities and limits of orientation analysis using dichroic attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy were elaborated on the seemingly ideal oriented polymer model system of end-grafted poly(N,N-dimethylaminoethylmethacrylate) chains. Such a system featured a polymer brush regime in the swollen state with z-axial orientation expected similarly high as thin spider silk films after ptm. Moreover, dichroic ATR-FTIR spectroscopy is a promising analytical method for closing gaps in the defined assignment of brush regimes. In summary, general models of the structure formation and self-assembly of spider silk protein in films depending on the parameters mentioned above could be developed and set in relation to IDP/IDR self-assembly by using dichroic FTIR spectroscopy as the basic analysis method. The herein postulated models on the molecular level contribute to the understanding and development of future industrial applications of spider silk protein-based materials and the clarification of unresolved questions regarding IDP and IDR systems.:Abstract V Kurzfassung IX List of Publications XIII Publications in Trade Journals XIII Presentations and Posters XIII Contribution to Joint Publications XV List of Abbrevations XVII List of Symbols XIX List of Figures XXV List of Tables XXXIII 1 Introduction and Motivation 1 2 Theory 5 2.1 Proteins and Peptides 5 2.1.1 General Definition of Proteins and Peptides 5 2.1.2 Structure of Globular Proteins 7 2.1.3 Protein Folding 10 2.1.4 Intrinsically Disordered Proteins and Protein Regions 11 2.2 Block Copolymers 14 2.3 Spiders and Spider Silks 17 2.3.1 Classification of Spiders 17 2.3.2 The Natural Spider Silk Spinning Process 18 2.3.3 Structure of Spider Silk and Spider Silk Proteins 19 2.3.4 Structure-Property Relationships of Spider Silk 21 2.4 Infrared Spectroscopy 23 2.4.1 Basic Principles of Infrared Spectroscopy 23 2.4.2 Basic Equipment and IR-Technologies 27 2.4.3 Orientation Analysis using Dichroic FTIR Spectroscopy 32 2.4.4 Infrared Spectroscopy of Proteins and Peptides 38 2.4.5 Quantitative Analysis of TRANS- and ATR-FTIR Protein Spectra 43 2.5 Electronic Circular Dichroism 46 2.5.1 Basics Principles of Circular Dichroism 46 2.5.2 Circular Dichroism of Proteins and Polypeptides 48 2.5.3 Spectra Analysis 50 2.6 Atomic Force Microscopy 51 2.6.1 Setup of Atomic Force Microscopes 51 2.6.2 Basic Principles of Atomic Force Microscopy 52 2.6.3 AFM Operation Modes 55 3 Experimental Section 57 3.1 Materials 57 3.1.1 Chemicals 57 3.1.2 Substrates 57 3.1.3 Film Preparation 58 3.2 Analytical Methods 60 3.2.1 Dichroic FTIR Spectroscopy 60 3.2.2 Atomic Force Microscopy 64 3.2.3 Electronic Circular Dichroism 64 3.2.4 Spectroscopic Ellipsometry 64 3.2.5 Infrared Nanospectroscopy 65 3.2.6 Grazing Incident Small Angle X-Ray Scattering 66 4 Results 67 4.1 Self-Assembly of eADF4(C16) Films 67 4.1.1 Motivation 67 4.1.2 Dichroic FTIR Spectroscopy Characterization of ß-sheet Orientation in Spider Silk Films on Silicon Substrates 68 4.2 Influence of the Hydrophilic and Hydrophobic Blocks on Peptide Self-Assembly 90 4.2.1 Motivation 90 4.2.2 β-Sheet Structure Formation within Binary Blends of Two Spider Silk Related Peptides 90 4.2.3 Influence of the Hydrophilic and Hydrophobic Blocks on the Inner Morphology in Spider Silk Protein Based Blend Films 122 4.3 Influence of the Sequence Motive Repeating Number on Spider Silk Protein Folding 123 4.3.1 Motivation 123 4.3.2 Influence of Sequence Motive Repeating Number on Protein Folding in Spider Silk Protein Films 124 4.4 Influence of the Module Order on Spider Silk Protein Self-Assembly 152 4.4.1 Motivation 152 4.4.2 Secondary Structure upon Post-treatment 153 4.4.3 β-Sheet Orientation after Post-treatment 157 4.4.4 Morphology and Surface Properties 158 4.4.5 Conclusion 160 4.5 Surface Induced Changes of Spider Silk Protein Self-Assembly 161 4.5.1 Motivation 161 4.5.2 Variation of the Substrate Surface Chemistry and Topography 161 4.5.3 Influence of the Surface Topography on Protein Self-Assembly 162 4.5.4 Influence of the Surface Chemistry on Protein Self-Assembly 164 4.5.5 Conclusion 169 4.6 Chances and Limits of Dichroic ATR-FTIR Spectroscopy 170 4.6.1 Motivation 170 4.6.2 Novel Insights into Swelling and Orientation of End-Grafted PDMAEMA Chains by In-Situ ATR-FTIR Complementing In-Situ Ellipsometry 171 5 Conclusion and Outlook 197 6 References 203 7 Appendix 219 8 Danksagung 227 9 Eidesstattliche Versicherung 229

Projection is the problem of checking whether the execution of a given sequence of actions will achieve its goal starting from some initial state. In this paper, we study a setting where we combine a two-dimensional Description Logic of context (ConDL) with an action formalism. We choose a well-studied ConDL where both: the possible states of a dynamical system itself (object level) and also different context-dependent views on this system state (context level) are organised in relational structures and can be described using usual DL constructs. To represent how such a system and its views evolve we introduce a suitable action formalism. It allows to describe change on both levels. Furthermore, the observable changes on the object level due to an action execution can also be contextdependent. We show that the formalism is well-behaved in the sense that projection has the same complexity as standard reasoning tasks in case ALCO is the underlying DL.

Although being quite inexpressive, the description logic (DL) FL₀, which provides only conjunction, value restriction and the top concept as concept constructors, has an intractable subsumption problem in the presence of terminologies (TBoxes): subsumption reasoning w.r.t. acyclic FL₀ TBoxes is coNP-complete, and becomes even ExpTime-complete in case general TBoxes are used. In the present paper, we use automata working on infinite trees to solve both standard and non-standard inferences in FL₀ w.r.t. general TBoxes. First, we give an alternative proof of the ExpTime upper bound for subsumption in FL₀ w.r.t. general TBoxes based on the use of looping tree automata. Second, we employ parity tree automata to tackle non-standard inference problems such as computing the least common subsumer and the difference of FL₀ concepts w.r.t. general TBoxes.