No description available.

Atmospheric interactions affected both the mechanics of impact ejecta deposition and the environmental effects from the catastrophic Chicxulub impact at the Cretaceous-Paleogene (K-Pg) boundary. Hypervelocity reentry and subsequent sedimentation of Chicxulub impact spherules through the Earth's atmosphere was modeled using the KFIX-LPL two-phase flow code, which includes thermal radiation and operates at the necessary range of flow regimes and velocities. Spherules were injected into a model mesh approximating a two-dimensional slice of atmosphere at rates based on ballistic models of impact plume expansion. The spherules decelerate due to drag, compressing the upper atmosphere and reaching terminal velocity at ~70 km in altitude. A band of spherules accumulates at this altitude, below which is compressed cool air and above which is hot (>3000 K) relatively-empty atmosphere.Eventually the spherule-laden air becomes unstable and density currents form, transporting the spherules through the lower atmosphere collectively as plumes rather than individually at terminal velocity. This has implications for the depositional style and sedimentation rate of the global K-Pg boundary layer. Vertical density current formation in both incompressible (water) and compressible (air) fluids is evaluated numerically via KFIX-LPL simulations and analytically using new instability criteria. Models of density current formation due to particulate loading of water are compared to tephra fall experiments in order to validate the model instabilities.The impact spherules themselves obtain peak temperatures of 1300-1600 K and efficiently radiate that heat as thermal radiation. However, the downward thermal radiation emitted from decelerating spherules is increasingly blocked by previously-entered spherules settling lower in the atmosphere. This self-shielding effect strengthens with time as the settling spherule cloud thickens and becomes increasingly opaque, limiting both the magnitude and duration of the thermal pulse at the ground. For a nominal Chicxulub reentry model, the surface irradiance peaks at 6 kW/m <super>2 </super> and is above normal solar fluxes for ~25 minutes. Although biologic effects are still likely, self-shielding by spherules may have prevented the global wildfires previously postulated. However, submicron dust may act as a hot opaque cap in the upper atmosphere, potentially increasing the thermal pulse beyond the threshold for forest ignition.

Geological and geophysical investigations of the Chicxulub meteorite impact structure have been ongoing since its scientific recognition in 1991 Hildebrand et al. 1991). The structure is of important significance because it is currently the only known impact crater that is linked to a global catastrophe, the Cretaceous/Tertiary boundary that occurred 65 Ma years ago. Major climatic and biological changes occurred at this interval that include the disappearance of 70% of all living species, in particular the dinosaurs. A global iridium anomaly along with the occurrence of shocked quartz grains characterize a thin clay layer this interval that led to the search for a large meteorite impact crater on continental crust. A large “volcanic” igneous province identified by oil exploration boreholes on the NW region of the Yucatán Peninsula was eventually recognized as a vast impactite deposit associated with a 180 km wide crater. Until 2002, only small grab and chip samples had been described from Chicxulub. This lack of sampling and, thus, poor understanding of the cratering conditions at Chicxulub led the International Continental Drilling Program (ICDP) to fund and drill the Yaxcopoil-1 borehole. The Yaxcopoil-1 (Yax-1) borehole was drilled 60 km south-southwest from the center of the Chicxulub meteoritic impact. It intersected 794.63 m of post-impact cover rocks, 100.31 m of impactites, and 616.03 m of Cretaceous target rocks, terminating at a final depth of 1510.97 m. The impactite interval, as well as several selected samples from the Cretaceous target rocks, is the focus of this scientific investigation. In conjunction with this work, the Yax-1 core was studied by numerous international research groups and is, thus, currently one of the best studied continuous diamond drill core from an impact crater. This petrographic and geochemical investigation provides further understanding on the primary and secondary conditions that influenced the formation of the Yax-1 impactites and selected target rocks. Five units have been recognized in the impactite interval. These subdivisions are based on macro- and microscopic observations and are complemented by geochemical characteristics. Unit 1 (795-822 m) comprises subrounded melt rock particles that are poorly sorted, yet show a progressive gradation with height, are self supported, show perlitic devitrification texture, and are generally fine-grained. Unit 2 (823-846 m) and Unit 3 (846-861 m) are relatively similar, as they both consist of a groundmass-supported breccia with melt rock particles that are angular, fluidal, and vesiculated in texture. The groundmass in both units is pervaded by numerous carbonate-veinlets and decreases in volume towards Unit 3 because of compaction. Unit 2 and Unit 1 are both altered to a predominantly green colour by the pervasive conversion of silicate phases from clay minerals. Unit 3 is of a variegated character and is suggested to be the less altered unit bove Unit 4. Unit 4 (861-885 m) comprises a massive yet brecciated microcrystalline impact melt rock. It is primarily of a silicate composition and contains only minor secondary carbonate crystals. All lithic fragments are of silicate compositions. Unit 5 (885-895 m) shows the greatest variation in the proportion of melt rock particles and lithic fragments. The melt rock particles contain numerous microlites that crystallized below the glass-transition temperature. These are suspended in a carbonate groundmass that is either of a primary impact melt origin or of a secondary nature. Units 1 and 5 both contain foraminifera fossils and greater proportions of carbonate clasts than any other units. All unit show shock metamorphic characteristics, i.e., planar deformation features, ballenquartz, and checkerboard feldspar. Geochemical results have been obtained by various analytical techniques in order to constrain cratering and alteration processes at various sampling scales. Main results reveal that samples from units 1 and 2 have been leached of their alkali elements, show negative Ce anomalies on a microscopic scale, and show less major element variation on a bulk sample scale than lower units. The groundmass in units 1 to 3 comprises a microcrystalline calcite and altered alkali element-, Ca- and Si- rich cement. In units 2, 3, and 5 melt rock particles are of a heterogeneous composition. In Unit 1, melt rock particles are highly altered, therefore volatile rich, and are of a more homogeneous composition than those of other units. On a bulk sampling scale, the silicate component for the whole impactite sequence shows remarkable homogeneity. Major and trace element compositions show that this component and Unit 4 are typical of the upper continental crust. The carbonate component is more calcite rich than dolomitic and most likely represents strong secondary alteration. No significant sulfur content was measured compared to published known target rock values. The contents of the siderophile elements, including Ni, Co, Ir, and Cr, do not indicate the presence of a significant extraterrestrial component in the Yax-1 impactites. Cretaceous rocks were also sampled in order to provide compositional constraints with the impactites and observe any shock related metamorphic features. Petrographic observations indicate that the Cretaceous rocks in the Yaxcopoil-1 drill core likely register a multistage deformation history that spans the period from pre- to post-impact. Contrary to previous studies that claimed evidence for the presence of impact melt breccia injection veins, no evidence was found from samples located between 1347–1348 m depth for the presence of melt breccia. An emplacement mechanism for the impactite sequence is proposed with regards to cratering. Unit 5 is interpreted as an early ejecta deposit that was emplaced following the passage of the initial ejecta curtain during the excavation stage of cratering. Unit 4 is an allogenic siliceous melt rock body that originated primarily from the fusion of the silicate crystalline basement. The origin of Unit 4 is based on geochemical and petrographic arguments, i.e., no carbonate component to the melt could be detected and only igneous/metamorphic mineral/rock fragments were observed in it. It is suggested Unit 4 was emplaced as an outward flow of fused crystalline basement rocks from the collapsing central uplift or it may have also been deposited from the fallback of a large melt bomb. Brecciation occurred post-deposition as fragments fit together like pieces of a jigsaw puzzle. Units 2 and 3 represent unreworked fallback suevite deposits. Vesiculated melt rock particles are a testimony of the volatile rich nature of the collapsing impact plume. Volatiles are believed to have helped disperse the suevite and inhibited the melt rock particles from undergoing compositional homogenization. Unit 1 represents a reworked fallback deposit that formed from the resurge of seawater into the impact basin. Unit 2 is the altered equivalent of Unit 3 and along with Unit 1 underwent significant post-depositional phyllosilicate alteration from circulating fluids at the top of the suevite pile.

Abstract Dissimilatory microbial sulfate reduction (MSR) The specific objectives of the study were to provide the first measurements of sulfur isotope fractionation associated with acidophilic sulfate reducing-microorganisms, and to examine whether pH influences sulfur fractionation during MSR. The fractionation associated with the strains investigated was comparable to that of neutrophilic strains with similar metabolisms (4-12‰), but varied with pH. Two fractionation regimes were identified: one regime is consistent with fractionation during exponential growth, while the other – not identified previously - is not linked to active sulfate reduction and may result from internal sulfate accumulation. This would represent the first measurement of sulfur fractionation during sulfate uptake, the first step of MSR. Geological processes at the Cretaceous-Paleogene (KPg) boundary The KPg boundary is associated with one of the largest biological extinctions in the history of our planet. Two major geologic events - the Chicxulub bolide impact with evaporite terrane and the eruption of the Deccan continental flood basalts - coincide with the KPg boundary and have been identified as possible triggers for the extinctions, but their relative timing remains unresolved. The objectives of this study were to identify the contribution of these processes to the sulfur burden in the sedimentary environment of two freshwater KPg sections, and to determine their relative timing. The results demonstrate that the peak of Deccan volcanism post-dates the Chicxulub impact and the associated abrupt KPg mass extinction, thus precluding a direct volcanic causal mechanism, but shedding light on the underlying causes for the delayed recovery of ecosystems in the early Paleogene.

Abstract Dissimilatory microbial sulfate reduction (MSR) The specific objectives of the study were to provide the first measurements of sulfur isotope fractionation associated with acidophilic sulfate reducing-microorganisms, and to examine whether pH influences sulfur fractionation during MSR. The fractionation associated with the strains investigated was comparable to that of neutrophilic strains with similar metabolisms (4-12‰), but varied with pH. Two fractionation regimes were identified: one regime is consistent with fractionation during exponential growth, while the other – not identified previously - is not linked to active sulfate reduction and may result from internal sulfate accumulation. This would represent the first measurement of sulfur fractionation during sulfate uptake, the first step of MSR. Geological processes at the Cretaceous-Paleogene (KPg) boundary The KPg boundary is associated with one of the largest biological extinctions in the history of our planet. Two major geologic events - the Chicxulub bolide impact with evaporite terrane and the eruption of the Deccan continental flood basalts - coincide with the KPg boundary and have been identified as possible triggers for the extinctions, but their relative timing remains unresolved. The objectives of this study were to identify the contribution of these processes to the sulfur burden in the sedimentary environment of two freshwater KPg sections, and to determine their relative timing. The results demonstrate that the peak of Deccan volcanism post-dates the Chicxulub impact and the associated abrupt KPg mass extinction, thus precluding a direct volcanic causal mechanism, but shedding light on the underlying causes for the delayed recovery of ecosystems in the early Paleogene.

Aus Patagonien lagen bisher wenige Daten zu paläoökologischen Veränderungen und zur Paläobiodiversität an der Kreide-Paläogen (K/Pg)-Grenze vor. Um diese Lücke zu schließen, wurden in den argentinischen Provinzen Neuquén und Chubut zahlreiche Profile im Bereich der K/Pg-Grenze detailliert beprobt. Während einer Planktonkrise, wie sie für die K/Pg-Grenze angenommen wird, werden für benthische Mollusken folgende Entwicklungen erwartet: 1. eine Abnahme der Individuenzahlen der Benthosorganismen, 2. eine Abnahme der vom Plankton als Nahrungsquelle direkt abhängigen Organismen, 3. eine Abnahme der Benthonten mit planktotrophen Larvalstadien, 4. eine Abnahme der mittleren Körpergröße der Individuen benthischer Faunengemeinschaften und 5. eine Abnahme der Organismen mit hoher Stoffwechselrate bzw. aktiver, mobiler Lebensweise. Tatsächlich waren die hungerresistenten Gruppen der Nuculoida (flach-infaunale Depositfresser) und der Lucinidae (Chemosymbionten) im Danium signifikant häufiger als im Maastrichtium, während der Faunenanteil der Suspensionsfresser im Danium im Vergleich zum Maastrichtium signifikant niedriger ist. In den Faunengemeinschaften des Daniums von Bajo de Añelo konnten Abnahmen der Individuenzahlen, der mittleren Mobilität und der mittleren Größe festgestellt werden. Die beobachteten paläoökologischen Veränderungen zeigen somit eine Selektivität, die sich auch in der Paläobiodiversitätsdynamik widerspiegelt. Auch hier sind Suspensionsfresser, die direkt vom Planktonangebot abhängig sind, stärker betroffen als Chemosymbionten und flach-infaunale Depositfresser. Die Aussterberaten für Bivalven sind mit 28% moderat. Insgesamt sind die festgestellten Selektivitätsmuster konsistent mit den zu erwartenden Folgen einer Planktonkrise. Trotz einiger regionaler Unterschiede handelte es sich um ein globales Ereignis an der K/Pg-Grenze, das Nord- und Südhalbkugel gleichermaßen betroffen hat. / From Patagonia only a few data on palaeoecological changes and on palaeobiodiversity at the Cretaceous/Paleogene (K/Pg)-boundary are available so far. Therefore detailed samples in different K/Pg-sections in the Argentinian provinces of Neuquén and Chubut were taken to increase the data set for this region. The following trends are expected from a crisis of primary productivity in the aftermath of the K/Pg-boundary: 1. a reduction in the number of individuals of benthic organisms, 2. a decrease in the relative abundance of organisms which rely directly on photosynthesis, 3. a lower proportion of individuals with planktotrophic larval stages, 4. a reduction in the average body size of individuals within palaeocommunities and 5. an increased abundance of organisms with low metabolic rates or inactive lifestyles. In fact the proportion of the starvation-resistant groups of the Nuculoida (shallow-infaunal deposit feeders) and Lucinidae (chemosymbionts) were significantly higher in the Danian compared to the Maastrichtian. In contrast to this, the proportion of suspension feeders in the palaeocommunities was significantly lower in the Danian in comparison with the Maastrichtian. In the Danian benthic assemblages of the Bajo de Añelo area, a decrease in number of individuals, mean mobility and mean size was recognised after the K/Pg-boundary. Thus the palaeoecological changes display a selectivity, which is also reflected in the palaeobiodiversity. Suspension feeders, which depend directly on plankton particles from the water column, show higher extinction rates than chemosymbionts and shallow-infaunal deposit feeders. The extinction rates of Patagonian bivalves are moderate (28%). Overall, the recognized selectivity patterns are consistent with the expected aftermath of a crisis in primary productivity. Despite some local differences, the results argue for a global event at the K/Pg-boundary during which the northern and southern hemispheres were similarly affected.

As one of the most common minerals in crustal rocks, quartz has been widely used as an indicator for shock metamorphism. Shocked quartz is found in the Chicxulub impact crater, an impact crater that has been linked to the Cretaceous-Tertiary extinction ~66 million years ago. The microstructural deformation features found in the shocked quartz do not form randomly, and their orientation provides a better understanding of the impact cratering process. At present, there are no studies of EBSD data analysis of shocked quartz from Chicxulub. We investigated six thin sections from two samples from the M0077A borehole in the lower peak ring of the Chicxulub impact crater, using the Scanning Electron Microscopy (SEM)-EBSD technique. Both samples consist of shocked granite, with a significant amount of quartz.  Therefore, this study investigates the crystallographic preferred orientation (CPO) of shocked quartz and predicts the seismic velocities and anisotropy, based on the EBSD data. We carried out the analysis of EBSD data by using the MATLAB-based MTEX toolbox that can perform CPO analysis from pole figure plots and the prediction of seismic properties of minerals based on the Voigt-Reuss-Hill effective medium method. Although acquiring the EBSD data from these samples is challenging, leading to the lack of data measured, we found out that the prediction of P wave seismic velocity is in good agreement with other recent studies conducted in the same area. The range of predicted P wave velocities is 5.5-6.5 km/s with anisotropy of 8-15%. The actual observed laboratory measurements and in-situ seismic measurements are considerably smaller than this velocity range because our calculations do not incorporate pores or take microcracks into account.  A likely explanation for the large variability of anisotropy in shocked quartz is the relatively few mapped grains with EBSD, which would influence the CPO and lead to high predicted seismic anisotropy. Considering a greaternumber of grains in the CPO analysis, the CPO is reduced, and seismic anisotropy becomes smaller.

Impaktite des Chicxulubkraters wurden petrographisch (Polarisationsmikroskopie, REM, KL) und chemisch (RFA, TRFA, PGE, EMS) untersucht, um das Verhalten von Ejekta während des atmosphärischen Transports zu erforschen. Die proximalen Impaktite der UNAM-7 Bohrung bestehen aus einer suevitischen Brekzie (222.2 bis 384.4 m) und einer basalen, polymikten Brekzie mit geringem Silikatschmelzanteil. Letztere beinhaltet Evaporit-Megablöcke und Karbonatschmelzpartikel; Zersetzung von Kalzit und Anhydrit ist durch Entgasungsbläschen indiziert. An der distalen Kreide-Paläogen Grenze von El Guayal (520 km SW vom Kraterzentrum) beinhaltet eine 10 m mächtige suevitische Abfolge in einer oberen Untereinheit akkretionäre Lapilli und darüber eine Toneinheit. Das Auftreten von Karbonatschmelzen mit der PGE-angereicherten Impaktorkomponente in der Toneinheit belegt den Zusammenhang der K-P Grenze mit dem Chicxulub-Impakt. Die folgenden Stadien können für die Ablagerung und Alteration der Ejekta unterschieden werden: (1) Ein Hochgeschwindigkeitsauswurf beschleunigte Zersetzungsprodukte und initiierte einen Gasstrom. (2) Karbonatschmelzen wurden mit Anhydrit-Megablöcken ausgeworfen und initiierten einen lateral ausbreitenden Ejektavorhang. Kalzitrückreaktionen erhitzte das Material während des Transports. (3) Die Ejektionswolke kollabierte teilweise, wobei der zurückfallende Suevit vom Impaktormaterial, das in die Stratosphäre verteilt wurde, fraktioniert wurde. Die Kombination von Silikatschmelze mit Kalzit initiierte einen heißen, gas-angetriebenen Strom. In einer oberen, moderat temperierten, turbulenten Aschewolke kondensierte Wasserdampf, und durch Akkretion von Asche entstanden akkretionäre Lapilli. (4) Die Impaktorkomponente wurde mit den feinsten Ejektamassen für Wochen bis Jahre abgelagert. (5) Der Transport von Ejekta in der heißen Ejektionswolke induzierte Alterationsprozesse in den Ablagerungen. Es kann geschlussfolgert werden, dass ein gewisser Anteil des CO2 zu Kalzit zurückreagierte, währenddessen SOX Gase vollständig in die Atmosphäre freigesetzt wurden. Diese Beobachtungen inklusive des Auftretens von Karbonatschmelzen unterstützen die Aussage, dass der freigesetzte Anteil von CO2 in die Atmosphäre in der Vergangenheit überbewertet wurde. / Impactites of the Chicxulub crater were studied petrographically (polarisation microscopy, SEM, CL) and chemically (XRF, TXRF, PGE, EMPA) to investigate the evolution of ejecta during transit through the atmosphere. At the proximal UNAM-7 borehole, the sequence of impactites consists of a suevitic breccia (222.2 to 348.4 m) on top of a polymict silicate melt-poor breccia. The latter is intercalated with evaporite megablocks representing an analogue to the Bunte Breccia of the Nördlinger Ries crater. It contains carbonate melt particles; calcite and anhydrite decomposition is indicated by degassing vesicles. At the distal Cretaceous-Palaeogene site of El Guayal (~520 km SW of the crater centre), a ~10 m thick suevitic succession contains at its upper subunit accretionary lapilli and on top a clay unit. Intermixing of calcite with hot silicate melt resulted in recrystallisation and decomposition of calcite. In the clay unit, the presence of carbonate melt spheroids together with the PGE-enriched impactor component links the Chicxulub impact with the K-P boundary. The following stages can be distinguished for the deposition and alteration of the ejecta: (1) Jetting accelerated decomposition products and initiated a vapour flow. (2) Carbonate melts were excavated with anhydrite megablocks and initiated a lateral extending ejecta curtain. Calcite reformations heated the material during transport. (3) The expanding ejecta plume partially collapsed separating the falling suevite from impactor material that had been lifted into the stratosphere. The combination of silicate melt with calcite initiated a hot, gas-driven, basal flow. In an upper, moderately tempered, turbulent ash cloud, steam condensed and accretion of ash-sized material formed accretionary lapilli. (4) The impactor component was deposited with the finest ejecta for weeks to years. (5) The prolonged transport of ejecta in the hot ejecta plume induced alteration processes observed in the deposits. It can be concluded that a certain amount of CO2 has back-reacted to calcite, whereas SOX gases were completely liberated. These observations including the abundant presence of carbonate melts support that the amount of CO2 released to the atmosphere during the Chicxulub impact was overestimated previously.