This dissertation presents results of a project bringing Scanning Tunneling Microscope (STM) into a regime of unlimited operational time at cryogenic conditions. Freedom from liquid helium consumption was achieved and technical characteristics of the instrument are reported, including record low noise for a scanning probe instrument coupled to a close-cycle cryostat, which allows for atomically resolved imaging, and record low thermal drift. Subsequent studies showed that the new STM opened new prospects in nanoscience research by enabling Scanning Tunneling Spectroscopic (STS) spatial mapping to reveal details of the electronic structure in real space for molecules and low-dimensional nanomaterials, for which this depth of investigation was previously prohibitively expensive. Quantum-confined electronic states were studied in single-walled carbon nanotubes (SWCNTs) deposited on the Au(111) surface. Localization on the nanometer-scale was discovered to produce a local vibronic manifold resulting from the localization-enhanced electron-vibrational coupling. STS showed the vibrational overtones, identified as D-band Kekulé vibrational modes and K-point transverse out-of plane phonons. This study experimentally connected the properties of well-defined localized electronic states to the properties of associated vibronic states. Electronic structures of alkyl-substituted oligothiophenes with different backbone lengths were studied and correlated with torsional conformations assumed on the Au(111) surface. The molecules adopted distinct planar conformations with alkyl ligands forming cis- or trans- mutual orientations and at higher coverage self-assembled into ordered structures, binding to each other via interdigitated alkyl ligands. STS maps visualized, in real space, particle-in-a-box-like molecular orbitals. Shorter quaterthiophenes have substantially varying orbital energies because of local variations in surface reactivity. Different conformers of longer oligothiophenes with significant geometrical distortions of the oligothiophene backbones surprisingly exhibited similar electronic structures, indicating insensitivity of interaction with the surface to molecular conformation. Electronic states for annealed ligand-free lead sulfide nanocrystals were investigated, as well as hydrogen-passivated silicon nanocrystals, supported on the Au(111) surface. Delocalized quantum-confined states and localized defect-related states were identified, for the first time, via STS spatial mapping. Physical mechanisms, involving surface reconstruction or single-atom defects, were proposed for surface state formation to explain the observed spatial behavior of the electronic density of states. This dissertation includes previously published co-authored material.

La calcite (carbonate de calcium) est un matériau extrêmement répandu dans les roches telles que le marbre et comme constituant dans des domaines variés (bâtiment, pharmacie, papier, art). La compréhension des propriétés mécaniques des suspensions de calcite constitue une étape importante pour améliorer à la fois leur maniabilité ainsi que les propriétés finales du matériau fabriqué. Cette étude relie les propriétés rhéologiques (élasticité, écoulement) de ces suspensions à leurs interactions microscopiques. Les interactions attractives entre particules de calcite confèrent aux pâtes les propriétés de gels colloidaux caractérisés par un module élastique et une déformation critique, et ce pour une large gamme de concentrations. L'étude de ces grandeurs en fonction de la concentration a permis de mettre en évidence pour la première fois l'existence de deux régimes de déformation (liens forts et faibles) prédits théoriquement et de caractériser la dimension fractale. L'étude des interactions a été réalisée grâce à la mesure du potentiel Zeta des pâtes, du pH et au calcul de la longueur de Debye résultant de la force ionique. L'ajout d'additifs tels que la chaux ou la soude modifie les interactions. La chaux réduit fortement l'élasticité initiale des pâtes, facilitant leur maniabilité et renforçant la réactivité de la pâte en présence de CO2. L'ajout de soude augmente fortement l'attraction entre les particules ce qui se traduit à l'échelle macroscopique par l'existence de bandes de cisaillement. Cette manifestation de l'attraction entre colloïdes à l'échelle macroscopique avait été observée dans des émulsions concentrées mais encore jamais dans les gels colloïdaux / Calcite (calcium carbonate) is an extremely widespread material that can be found naturally in rocks (i.e. marble, limestone) and is employed in many industrial fields such as paper filling, pharmaceutical, art or construction. Understanding the mechanical properties of calcite suspensions is a first step to improve the workability of the paste as well as the final properties of solid mineral materials. Macroscopic characterization of calcite suspensions via rheological measurements are linked to microscopic interactions, via DLVO analysis. Our calcite pastes are weakly attractive systems showing a typical colloidal gel behavior and characterized by an elastic shear modulus and a critical strain. The elastic domain of pure calcite suspensions is characterized for a wide range of volume concentrations. The deformation at the end of linearity exhibits a minimum versus concentration, a major prediction of colloidal gel theory, never verified so far. The interaction forces between particles are tuned by addition of simple ionic species. Rheological measurements are analyzed through DLVO calculations, obtained by chemical speciations and ζ potential measurements on dense suspensions. Addition of calcium hydroxide improves initially the workability of the paste, enhancing the reactivity when in contact with CO2. The role of interaction forces is also evaluated with flow measurements. The addition of sodium hydroxide increases strongly the attraction between particles, inducing shear bands at the macroscopic scale. This correlation is well known for emulsions but never verified so far for colloidal gels

O intumescimento é um dos fatores decisivos que influenciam o comportamento de desintegração de formas farmac6uticas compactadas e, consequentemente, o perfil biofarmacêutico de substancias ativas. Entre os diversos adjuvantes empregados para promover a desagregação daquelas formas farmac6uticas nas suas partículas primarias originais, são utilizadas varias substancias, abrangidas pelo conceito de desintegrantes intumescedores. A escolha do adjuvante mais adequado nestes casos pode ser vista como uma atividade que exige o gasto considerável de tempo e de custos elevados. Além disto deve ser levada em consideração a existência de vários produtos similares no mercado. A questão da equival6ncia representa portanto um desafio importante na fase de formulação. Com o objetivo de aumentar os conhecimentos nesta área, foi desenvolvido equipamento para a avaliação dinâmica do intumescimento de pês. Inicialmente foram considerados fatores de construção do aparelho, tais como a porosidade, espessura e área do filtro de vidro sintetizado. Foram tamb6m avaliadas variações metodológicas, entre as quais a temperatura de realização do teste e o meio liquido empregado. Croscarmelose, um superdesintegrante, foi utilizada como adjuvante-modelo no teste do equipamento. A alteração do meio liquido de ensaio foi o fator que causou a maior influ6ncia sobre os resultados, embora a espessura dos filtros de vidro sintetizado tenha causado alguma alteração quer no tempo como no volume final de intumescimento. intumescimento. Já a mudança de temperatura não provocou diferenças significativas nas observações. Numa segunda fase foi investigada a influência deste desintegrante sobre as características de intumescimento de quatro celuloses microcristalinas (CMCr) isoladas ou adicionadas com um lubrificante. Para tanto elaborou-se um planejamento fatorial 4 X 2 X 2. A presença do desintegrante, como esperado, provocou aumento do volume final de intumescimento das CMCr, que apresentaram, no entanto, comportamentos diferenciados frente ao adjuvante. Já a presença do lubrificante conduziu a resultados totalmente dependentes do tipo de CMCr testada. A análise comparativa entre estes produtos demonstrou que somente num caso houve simitaridade de comportamento. / Swelling is one of the decisive factors influencing the disintegrant behavior of compacted pharmaceutical dosage forms and consequently the biopharmaceutical profile of drug substances. Among the various excipients used to promote the disintegration of such dosage forms in its originally primary particles, several substances, classified as swelling disintegrants, are employed. The choice of the most appropriate excipient in this case can be a time and cost consuming enterprise. Additionally it must be considered that the same substance can be delivered in the market by different producers. The question of equivalence represents also an important challenge in the formulation phase. In order to provide more knowledge in this area an apparatus to analyze the dynamic swelling of powder admixtures was developed. Construction factors such as filter porosity, thickness and area were considered. Methodological variants including essay temperature and liquid medium were also evaluated. Croscarmelose, a superdisintegrant, was used as model excipient to test the self built equipment. The change of the test fluid was the determinant factor on the results, although the thickness of the sintered glass filter showed some influence on both swelling volume and swelling time of this adjuvant. As a second step, the influence of this disintegrant on the swelling behavior of four microcrystalline celluloses (MCC) alone or added with a lubricant were investigated by using a 4 X 2 X 2 factorial design. The presence of the disintegrant was able to increase the swelling volume. Both final swelling volume and time were dependent of the MCC type. The lubricant showed different influences on the four tested MCC. A comparative study demonstrated that only in one case these products presented similarly swelling behavior.

This dissertation examines the motion of colloids in a temperature gradient, a non-equilibrium phenomenon also known as thermophoresis. Chapter 1 gives an introduction to the existing applications and basic concepts of thermophoresis and outlines some of the experimental and theoretical challenges that serve as a motivation for this PhD project. In Chapter 2, a general theoretical description for thermophoresis is formulated using the theory of non-equilibrium thermodynamics. The colloidal flux is split up into an interfacial single-colloid contribution and a bulk contribution, followed by a determination of transport coefficients based on Onsager’s reciprocal relations. It is further shown how the phenomenological expression of the thermophoretic flux can be recovered when the fluid is at steady-state. The results issuing from this description are then discussed and compared to other existing approaches, some of which are shown to neglect the hydrodynamic character of colloidal thermophoresis. Chapter 3 is dedicated to the validation of the introduced theoretical framework by means of computer simulations, using a simulation technique known as multi-particle collision dynamics. More specifically, the dependence of the thermophoretic force on different system parameters is examined and deviations from the theoretical prediction are explained by an advective distortion of interfacial fluid properties at the colloidal surface. Chapter 4 presents steady-state measurements of functionalised colloids in a temperature gradient, showing how the addition of molecular surface groups increases the experimental complexity of thermophoretic motion. The relaxation process behind this steady-state is also studied, to determine how the relaxation speed depends on the applied temperature gradient. In chapter 5, a general conclusion is drawn from the presented work and its implications are briefly discussed in relation to the current state of knowledge. Finally, the discussion is closed with an outlook on remaining challenges in understanding colloidal motion that could be the subject of future research.

Magnetic resonance (MR) is a highly versatile technique with great potential for use in industrial applications; from the in situ study of unit operations to the optimisation of product properties. This thesis, concerned with the latter, is divided into two parts. Firstly, dynamic MR is applied to characterise the flow behaviour, or rheology, of process fluids. Such characterisation is typically performed using conventional rheometry methods operating offline, with an online, or inline, method sought for process control and optimisation. Until recently, MR was an unlikely choice for this application due to the requirement of high-field MR hardware. However, recent developments in low-field MR hardware mean that the potential of MR in such applications can now be realised. Since the implementation of MR flow imaging is challenging on low-field MR hardware, two new approaches to MR rheometry are described using pulsed field gradient (PFG) MR. A cumulant analysis of the PFG MR signal is first used to characterise the rheology of model power-law fluids, namely xanthan gum-in-water solutions, accurate to within 5% of conventional rheometry, the data being acquired in only 6% of the time required when using MR flow imaging. The second approach utilises a Bayesian analysis of the PFG MR signal to characterise the rheology of model Herschel--Bulkley fluids, namely Carbopol 940-in-water solutions; data are acquired in only 12% of the time required for analysis using MR flow imaging. The suitability of the Bayesian MR approach to study process fluids is demonstrated through experimental study on an alumina-in-acetic acid slurry used by Johnson Matthey. Secondly, MR imaging is used to provide insights into the origins and mechanisms of colloidal gel collapse. Many industrial products are colloidal gels, a space-spanning network of attractive particles with a yield stress. Colloidal gels are, however, known to undergo gravitational collapse after a latency period, thus limiting the shelf-life of products. This remains poorly understood, with a more detailed understanding of both fundamental interest and practical importance. To this end, MR imaging is applied offline to investigate the phase behaviour of colloidal gels. In particular, a comparison of the simulated and experimental phase diagrams suggests gravitational gel collapse to be gravity-driven. Furthermore, measurement of the colloid volume fraction using MR imaging indicates the formation of clusters of colloids at the top of the samples. Whether such clusters initiate gravitational gel collapse is yield stress-dependent; the gravitational stress exerted by a cluster must be sufficient to yield the colloidal gel.

abstract: Environmentally responsive microgels have drawn significant attention due to their intrinsic ability to change volume in response to various external stimuli such as pH, temperature, osmotic pressure, or electric and magnetic fields. The extent of particle swelling is controlled by the nature of the polymer-solvent interaction. This thesis focuses on design and synthesis of environmentally responsive microgels and their composites, and encompasses methods of utilizing microgel systems in applications as vehicles for the adsorption, retention, and targeted delivery of chemical species. Furthermore, self-assembled microgel particles at ionic liquid (IL)-water interfaces demonstrate responsive colloidal lattice morphology. The thesis first reports on the fundamental aspects of synthesis, functionalization, and characteristic properties of multifunctional environmentally responsive microgels derived from poly(N-isopropylacrylamide) (PNIPAm) and other functional co-monomers. In particular, the uptake and release of active chemical species such as rheology modifiers into and from these ionic microgels is demonstrated. Moreover, a facile tunable method for the formation of organic-inorganic composites with Fe3O4 nanoparticles adsorbed and embedded within ionic microgel particles is explored. Additionally, the development of zwitterionic microgels (ZI-MG) is presented. These aqueous ZI-MG dispersions exhibit reversible parabolic swelling as a function of pH and display a minimum hydrodynamic diameter at a tunable isoelectric point (IEP). This study also elucidates the controlled uptake and release of surfactants from these particle systems. The extent of surfactant loading and the ensuing relative swelling/deswelling behaviors within the polymer networks are explained in terms of their binding interactions. The latter part of this thesis highlights the versatility of fluorescently labeled microgel particles as stabilizers for IL-water droplets. When the prepared particles form monolayers and equilibrate at the liquid-liquid interface, the colloidal lattice organization may re-order itself depending on the surface charge of these particles. Finally, it is shown that the spontaneously formed and densely packed layers of microgel particles can be employed for extraction applications, as the interface remains permeable to small active species. / Dissertation/Thesis / Doctoral Dissertation Chemical Engineering 2015

abstract: The rapid progress of solution-phase synthesis has led colloidal nanocrystals one of the most versatile nanoscale materials, provided opportunities to tailor material's properties, and boosted related technological innovations. Colloidal nanocrystal-based materials have been demonstrated success in a variety of applications, such as LEDs, electronics, solar cells and thermoelectrics. In each of these applications, the thermal transport property plays a big role. An undesirable temperature rise due to inefficient heat dissipation could lead to deleterious effects on devices' performance and lifetime. Hence, the first project is focused on investigating the thermal transport in colloidal nanocrystal solids. This study answers the question that how the molecular structure of nanocrystals affect the thermal transport, and provides insights for future device designs. In particular, PbS nanocrystals is used as a monitoring system, and the core diameter, ligand length and ligand binding group are systematically varied to study the corresponding effect on thermal transport. Next, a fundamental study is presented on the phase stability and solid-liquid transformation of metallic (In, Sn and Bi) colloidal nanocrystals. Although the phase change of nanoparticles has been a long-standing research topic, the melting behavior of colloidal nanocrytstals is largely unexplored. In addition, this study is of practical importance to nanocrystal-based applications that operate at elevated temperatures. Embedding colloidal nanocrystals into thermally-stable polymer matrices allows preserving nanocrystal size throughout melt-freeze cycles, and therefore enabling observation of stable melting features. Size-dependent melting temperature, melting enthalpy and melting entropy have all been measured and discussed. In the next two chapters, focus has been switched to developing colloidal nanocrystal-based phase change composites for thermal energy storage applications. In Chapter 4, a polymer matrix phase change nanocomposite has been created. In this composite, the melting temperature and energy density could be independently controlled by tuning nanocrystal diameter and volume fractions. In Chapter 5, a solution-phase synthesis on metal matrix-metal nanocrytal composite is presented. This approach enables excellent morphological control over nanocrystals and demonstrated a phase change composite with a thermal conductivity 2 - 3 orders of magnitude greater than typical phase change materials, such as organics and molten salts. / Dissertation/Thesis / Doctoral Dissertation Mechanical Engineering 2015

abstract: A comprehensive and systematic investigation on the diffusion and phase behaviors of nanoparticles and macromolecules in two component liquid-liquid systems via Molecule Dynamic (MD) simulations is presented in this dissertation. The interface of biphasic liquid systems has attracted great attention because it offers a simple, flexible, and highly reproducible template for the assembly of a variety of nanoscale objects. However, certain important fundamental issues at the interface have not been fully explored, especially when the size of the object is comparable with the liquid molecules. In the first MD simulation system, the diffusion and self-assembly of nanoparticles with different size, shape and surface composition were studied in an oil/water system. It has been found that a highly symmetrical nanoparticle with uniform surface (e.g. buckyball) can lead to a better-defined solvation shell which makes the “effective radius” of the nanoparticle larger than its own radius, and thus, lead to slower transport (diffusion) of the nanoparticles across the oil-water interface. Poly(N-isopropylacrylamide) (PNIPAM) is a thermoresponsive polymer with a Lower Critical Solution Temperature (LCST) of 32°C in pure water. It is one of the most widely studied stimulus-responsive polymers which can be fabricated into various forms of smart materials. However, current understanding about the diffusive and phase behaviors of PNIPAM in ionic liquids/water system is very limited. Therefore, two biphasic water-ionic liquids (ILs) systems were created to investigate the interfacial behavior of PNIPAM in such unique liquid-liquid interface. It was found the phase preference of PNIPAM below/above its LCST is dependent on the nature of ionic liquids. This potentially allows us to manipulate the interfacial behavior of macromolecules by tuning the properties of ionic liquids and minimizing the need for expensive polymer functionalization. In addition, to seek a more comprehensive understanding of the effects of ionic liquids on the phase behavior of PNIPAM, PNIPAM was studied in two miscible ionic liquids/water systems. The thermodynamic origin causes the reduction of LCST of PNIPAM in imidazolium based ionic liquids/water system was found. Energy analysis, hydrogen boding calculation and detailed structural quantification were presented in this study to support the conclusions. / Dissertation/Thesis / Doctoral Dissertation Chemical Engineering 2017

Nanoparticulas magnéticas (NPMs) de óxido de ferro tem sido amplamente utilizadas em diversas áreas da biotecnologia e biomedicina, tais como no tratamento de câncer, na entrega controlada de fármacos e como agentes de contraste em imagem por ressonância magnética. O intuito deste trabalho foi sintetizar nanopartículas magnéticas com magnetização de saturação intensificadas via processo do poliol modificado e modificar sua superfície afim de promover a biocompatibilização dos sistemas. Além da funcionalização de nanopartículas previamente biocompatibilizadas utilizando dois métodos: via ligação amida com moléculas de ácido fólico (AF) e com a encapsulação das nanopartículas com quitosana. A modificação de superfície deu-se via procedimentos de lavagem de superfícies, adição e/ou troca de ligantes utilizando moléculas de ácido ?- aminocapróico (EACA), aminopropiltrimetoxisilano (APTMS) e ácido dimercaptosuccínico (DMSA). Através da microscopia eletrônica de transmissão (TEM), foi obtido que as nanopartículas magnéticas de magnetita obtiveram um diâmetro médio de 8 nm, em uma estreita distribuição de tamanho. A difração de raios-X (DRX) indicou a formação de magnetita em todos os sistemas em que o método do poliol modificado foi utilizado. As medidas de espectroscopia vibracional na região do infravermelho (FTIR) evidenciaram a presença de modos de vibração relacionados às macromoléculas e compostos inorgânicos utilizados na modificação de superfície das nanopartículas magnéticas e/ou funcionalização. A TEM das diferentes modificações de superfície mostram a formação de aglomerados dependendo da molécula utilizada. Os estudos de estabilidade coloidal foram necessários para que o meio biológico fosse simulado para uma possível aplicação destes sistemas como carreadores para tratamento via magnetohipertermia ou entrega controlada de NPMs para tratamento de câncer. A nanopartícula recoberta com DMSA apresentou melhores resultados de estabilidade coloidal. Com os sistemas funcionalizados com ácido fólico, o procedimento via ligação com carbodiimida na presença de NHS demonstrou ser eficaz na formação de ligação amida, confirmada por FTIR e quantificação de ligantes. A funcionalização com quitosana necessita de alguns ajustes, visto ser um novo procedimento, porém alguns sistemas em que foi utilizado o método da gelificação iônica possuíram bons resultados de nanocápsulas de quitosana formadas com nanopartículas biocompatibilizadas em seu interior. / Magnetite, iron oxide, is a type of magnetic nanoparticles (NPMs) that is a widely adopted in several areas of biotechnology and biomedicine, such as in the treatment of cancer, controlled delivery of drugs and as contrast agents in magnetic resonance imaging. The purpose of this work is to synthesize magnetic nanoparticles with enhanced saturation magnetization via modified polyol process and modify its surface to promote a biocompatibilization in these systems. In addition, there was the aim to functionalize nanoparticles with modificate surfaces, using two methods: via amide bonding with folic acid molecules (AF) and encapsulation of nanoparticles with chitosan. Surface modification was done via surface washing, addition and / or exchange ligands using ?-aminocaproic acid (EACA), aminopropyltrimethoxysilane (APTMS) and dimercaptosuccinic acid (DMSA) molecules. By transmission electron microscopy (TEM), it was obtained that the magnetite nanoparticles had an average diameter of 8 nm, in a narrow size distribution. X-ray diffraction (XRD) indicated formation of magnetite in all systems where modified polyol method was used. Infrared spectroscopy (FTIR) showed the presence of vibration modes related to macromolecules and inorganic compounds used in the surface modification of magnetic nanoparticles and / or functionalization. The TEM of different surface modifications showed the formation of agglomerates, depending on the molecule used. Colloidal stability studies were necessary to simulate a biological medium for a possible application of these systems as carriers for treatment via magnetohyperthermia or controlled delivery of NPMs for cancer treatment. Nanoparticles coated with DMSA showed better colloidal stability results. With folic acid functionalized systems, the procedure via carbodiimide linkage in the presence of NHS had been shown to be effective in FTIR-confirmed amide bond formation and ligand quantification. The functionalization with chitosan requires some adjustments, since it was a new procedure, however some systems using the ionic gelation method had good results of chitosan nanocapsules formed with biocompatibilized nanoparticles in structure.

Les suspensions colloïdales de particules sphériques présentant des interactions de type sphères dures font partie des systèmes les plus simples et les plus largement étudiés en Matière Molle. Elles peuvent être considérées comme systèmes modèles pour tester des théories plus générales, par exemple en ce qui concerne la cristallisation [1] ou la transition vitreuse [2]. Malgré de nombreux résultats théoriques et expérientaux dans ce domaine, le comportement dynamique des suspensions de sphères dures n'a pas été complètement élucidé.La spectroscopie à corrélation de photons X (XPCS) est une technique de diffusion cohérente équivalente à la Diffusion Quasi-Elastique de la Lumière [3], qui est un des principaux outils d'investigation de la dynamique colloïdale [4]. Comparée à la luière visible, l'utilisation de rayons X procure des rensignements sur les transferts de moment de plus haute énergie, et évite les diffusions multiples - phénomène qui complique sensiblement les études en DQEL pour les échantillons concentrés. De plus, l'utilisation du détecteur 2D compteur de photons (MAXIPIX) disponible sur la ligne ID10 (ESRF) donne des renseignements sur l'évolution de la dynamique de l'échantillon au cours de l'exposition, via les fonctions de corrélation à deux temps.Dans ce travail, nous avons étudié une suspension de spheres colloïdales de PMMA (poly(méthylmétacrylate)) stériquement stabilisées. La distribution en taille des particules et leur concentration ont été obtenues par diffusion de rayons X aux petits angles (SAXS). Les expériences de XPCS effectuées aux plus grandes fractions volumiques en particules (>0.5) mettent en évidence à la fois des temps de diffusion courts et des temps longs autour des pics de Bragg. Une comparaison avec une précédente étude [5] montre, pour une petite gamme de fractions volumiques, une modification drastique de la loi d'échelle entre les temps de relaxation courts et les temps longs qui avait été initialement proposée par Segrè et Pusey [6]. L'analyse des fonctions de corrélation à deux temps révèle un comportement dynamique complexe des échantillons légèrement au-dessus de la transition vitreuse, alors qu'on n'observe aucun signe de modifications structurales via diffusion statique. Utiliser la XPCS sur des suspensions en écoulement dans des canaux cylindriques avait fait ses preuves pour renseigner à la fois sur les propriétés dynamiques et d'écoulement de suspensions diluées [7]. Ici, nous discutons les potentialités et les limites de cette méthode, en étudiant l'interaction entre les propriétés rhéologiques et dynamiques dans ces systèmes complexes modèles que sont les verres colloïdaux.[1] P. N. Pusey and W. van Megen. In: Nature 320.6060 (Mar. 1986), pp. 340–342 [2] P. N. Pusey and W. van Megen. In: Phys. Rev. Lett. 59 (18 1987), pp. 2083–2086.[3] V. A. Martinez et al. In: The Journal of Chemical Physics 134.5, 054505 (2011), p. 054505.[4] B. J. Berne and R. Pecora. Dynamic Light Scattering with application to chemistry, biology and physics. Dover Publications, New York, 2000. [5] D. Orsi et al. “Dynamics in dense hard-sphere colloidal suspensions”. In: Phys. Rev. E 85 (1 2012), p. 011402. doi: 10.1103/PhysRevE.85.011402. url: http://link.aps.org/doi/1 0.1103/PhysRevE.85.011402. [6] P. N. Segrè and P. N. Pusey. In: Phys. Rev. Lett. 77.4 (1996), pp. 771–774.[7] A. Fluerasu et al. In: New Journal of Physics 12.3 (2010) / Colloidal suspensions of spherical particles presenting hard-sphere like interactions is one of the simplest and most widely studied systems of soft condensed matter. They can be treated as a model for testing fundamental theories, regarding e.g. crystallization [1] or glass transition [2]. Despite the long history of both theoretical and experimental research, the dynamic behavior of hard sphere suspensions still lacks a complete understanding.X-ray Photon Correlation Spectroscopy (XPCS) is a coherent scattering technique equivalent to Dynamic Light Scattering (DLS) [3], which is one of the main tools used in the study of colloidal dynamics [4]. Comparing to visible light, the use of X-rays provides access to higher momentum transfer vector values and allows to avoid multiple scattering – a phenomena significantly complicating DLS measurements on concentrated samples. Moreover, the use of a fast, single photon counting area detector (MAXIPIX) available at the ID10 beamline at ESRF gives insight into the evolution of sample dynamics during the measurement time by the means of two-time correlation functions.In this work suspensions of sterically stabilized poly(methyl methacrylate) (PMMA) colloidal spheres were used. Particle size, polydispersity and volume fractions of the samples were obtained using the Small-Angle X-ray Scattering (SAXS) technique. XPCS measurements at high volume fractions (>0.5) show both short- and long-time diffusive behaviour for scattering vector values around, but not restricted to the structure factor peak position. A comparison with an earlier study [5] shows a dramatic change in the approximate scaling between the short- and long-time relaxation rates, initially proposed by Segrè and Pusey in [6], over a small range of volume fractions. The analysis of two-time correlation functions reveals complex dynamic behaviour of a sample slightly above the glass transition, while no signs of structural changes are observed in the static scattering patterns. The studies indicate the dynamics being governed by a jamming transition driven by restrictions in free volume rather than a glass transition as know from the mode-coupling theory. A combination of XPCS with flow in a cylindrical channel has demonstrated previously to give both dynamic and flow properties of dilute suspensions [7]. Here we discuss the potential and limitations of this method in the study of the interplay between rheological properties and dynamics in complex systems such as colloidal glasses. [1] P. N. Pusey and W. van Megen. In: Nature 320.6060 (Mar. 1986), pp. 340–342[2] P. N. Pusey and W. van Megen. In: Phys. Rev. Lett. 59 (18 1987), pp. 2083–2086.[3] V. A. Martinez et al. In: The Journal of Chemical Physics 134.5, 054505 (2011), p. 054505.[4] B. J. Berne and R. Pecora. Dynamic Light Scattering with application to chemistry, biology and physics. Dover Publications, New York, 2000.[5] D. Orsi et al. “Dynamics in dense hard-sphere colloidal suspensions”. In: Phys. Rev. E 85 (2012), p. 011402.[6] P. N. Segrè and P. N. Pusey. In: Phys. Rev. Lett. 77.4 (1996), pp. 771–774.[7] A. Fluerasu et al. In: New Journal of Physics 12.3 (2010)