In this task I performed the analysis of status of consumer electronics market in the Czech Republic after 1989 year when a phase of planned economy was finished and market relations also entered into this field. I hypothesize that also in nowadays when competitive environment dominates and most of the trade is occupied by strong transnational companies it is possible to realize the idea of independent business. I describe this state and follow new development trends. At the same time I do survey of present-day situation and division of market among the biggest sellers. I pay attention also to internet trading that goes through the dynamic development. But despite of this fact a businessmen keep on searching the way how to operate both of he sell types (classical and internet one) together. At the end of this task I introduce the biggest traders of the market and I confirm the hypothesis that also independent trader can find his place at consumer electronics market and became successful.

Dye-sensitized solar cells (DSSCs) or Grätzel cells are electrochemical devices in where physicochemical properties of different materials are combined to obtain electric energy. These photoconversion devices have evolved from a pioneering concept of molecular photovoltaics to industrial development with confirmed record efficiencies of 14.3%. Their efficiency combined with low-cost production methods and a high aesthetic interest enables the production of DSSC products for consumer electronics market. The strengths of this technology and the fact that its drawbacks are not limiting for this application makes consumer electronics and DSSC a perfect match for the development of self-powered devices. Some companies have already spot a potential market and are currently launching different consumer electronics and other devices with embedded DSSC. This thesis provides an overview of the operation principles of DSSC and the possible routes to improve the efficiency of these devices to emerge and thrive. Additionally, improvements in efficiency, stability and manufacturing needed to be addressed in the near future for this technology are discussed and its suitability to represent a breakthrough in the market of consumer electronics. An overview of the main companies developing DSSC and current prototypes and products is included.

<p>Smartphones, one of the most common consumer electronic devices, are an essential part of daily activities in modern society. Smartphones provide faster communication, easier access to information and many other important services. However, with a compressed product life cycle and growing consumer demand, a significant number of smartphones reach End-of-Life (EoL) annually. At the same time, due to many special physical properties, rare earth, critical and other important metals are essential for the manufacturing of smartphones. Hence, from various economic, resources availability and environmental perspectives, it is crucial to understand how metal content of different smartphones generations change over time. To this end, a high production smartphone series, produced between 2010 and 2015 were considered in the scope of this study. The devices were disassembled, sorted into different components and size reduced. Printed circuit boards assembly, back cameras and NFC antenna/wireless charging chips were then digested using a novel microwave assisted acid digestion method. Inductively Coupled Plasma-Optical Emission Spectroscopy was used to detect and quantify 60 elements. Obtained results indicate that up to 70% of different smartphones components by weight are important recyclable metals. The highest concentration elements, Cu, Ni, Sn, Zn and Fe, accounted for 93.3% while REEs and PGMs collectively accounted for 0.53% of the total recoverable elements by weight. In 2019, the total addressable market value of metals reclamation from only three smartphone components at their end of life is estimated at 298.69 million USD in USA. Gold and Platinum were determined to be the most environmentally critical elements and efforts should made to reduce their use. Finally, and most importantly, smartphones manufacturers should design their products with an extended lifetime due to the high concentration of critical elements used to make them.</p>

The goal of study 1 was to use a remote eye tracker to understand how eye movements change with 7 geometrically varied remote controls to determine design element saliency. 20 participants were used to measure the following eye metrics: number of fixations prior to first fixation of any AOI, time to first fixation of an AOI, number of fixations on an AOI, dwell time of the first fixation on an AOI, total dwell time of an AOI, and the percentage of time spent on an AOI. The results of the study showed that all participants spent between 75-85% of their time fixated on the button layout which was not defined as an AOI. No statistical differences were found in the values measured for all eye tracking metrics across similarly defined AOIs. In study 2, the objective was to determine attitudes towards appearance and usability of the 7 remote control designs using the participants from study 1. Participants were asked to rate their attitudes and preferences, using a Likert-based questionnaire, about the qualities of appearance and usability for the attributes of proportion, shape, and configuration. They were asked open-ended questions about their likes and dislikes regarding the qualities of appearance and usability. Lastly, participants were given a pairwise comparison survey where they chose their preferred remote design, based on appearance, for 10 paired sets of contrasting remote designs. The hourglass subjacent and hourglass round designs were rated highest for appearance and usability from the Likert questionnaire. The hourglass round design was ranked highest for the pairwise comparison survey. For study 3, the goal was to determine attitudes towards appearance and usability of the 7 remote designs with online participants. 300 participants were asked to rate their attitudes and preferences using the same Likert-based questionnaire from study 2. They were asked the same open-ended questions and administered the same pairwise comparison survey as in study 2. The results of the Likert questionnaire showed that the hourglass subjacent and hourglass round designs were rated highest for appearance and usability. From the pairwise comparison survey, the hourglass round design was ranked the highest.

Tesis por compendio / [EN] The determination of genetic biomarkers is progressively becoming more extended and popular, being commercialized even in kits for personalized medicine. Establishing specific genotype variations for each patient, such as single nucleotide polymorphisms (SNPs), could be a fundamental tool in the field of diagnosis, prognosis and therapy selection. However, the use of DNA testing is not fully implemented in general healthcare, mainly due to technical and economic barriers associated to the current technologies, which are limited only to specialized centers and large hospitals. In this thesis, the main goal was to overcome these obstacles by developing simpler, faster and more affordable point-of-care (POC) genotyping systems. Allele discrimination was achieved by employing isothermal enzymatic reactions, like recombinase polymerase amplification (RPA), ligation of oligonucleotides and loop-mediated isothermal amplification (LAMP). These processes were integrated to colorimetric indicators and immunoenzymatic assays, in a microarray format. Using compact discs and polycarbonate chips as platforms, the detection was achieved through widespread electronics, like disc-reader, flatbed scanner and smartphone. To demonstrate their capacities, the resulting systems were applied for identifying SNPs in human samples, associated to therapies for tobacco smoking cessation, major depression disorder and blood clotting-related diseases. After selecting the proper conditions, all studied strategies discriminated SNPs in samples containing as low as 100 copies of genomic DNA, with an error rate below 15%. Most importantly, the developed methods have reduced assays times varying between 70 and 140 minutes, at a cost similar to a conventional PCR-based analog, but maintaining or raising amplification efficiency and eliminating the need of specialized temperature cyclers and fluorescence scanners. In conclusion, the biosensors based in isothermal reactions and consumer electronics devices greatly improve the competitivity of POC DNA analysis. It was demonstrated that the technologies developed in this thesis could support genotyping assays in low-resource areas, such as primary healthcare centers and emerging countries. Through this democratization of genetic testing and by performing adequate association studies, molecular diagnostics and personalized medicine practices could have their application extended to the clinical routine. / [ES] La determinación de biomarcadores genéticos es cada vez más extensa y popular, estando incluso comercializándose kits para medicina personalizada. Establecer las variaciones específicas en el genotipo de cada paciente, como los polimorfismos de un solo nucleótido (SNP) podría ser una herramienta fundamental en el campo del diagnóstico, pronóstico y selección de la terapia. Sin embargo, el uso de pruebas de ADN no se encuentra completamente implementado en la atención médica general, principalmente debido a las barreras técnicas y económicas asociadas a las tecnologías actuales, limitadas solamente a centros especializados y grandes hospitales. En esta tesis, el objetivo principal fue superar estos obstáculos mediante el desarrollo de sistemas de genotipado point-of-care (POC), más simples, rápidos y asequibles. La discriminación alélica se logró mediante el uso de reacciones enzimáticas isotermas, como la amplificación de la recombinasa polimerasa (RPA), la ligación de oligonucleótidos y la amplificación isotérmica mediada por bucle (LAMP). Estos procesos se integraron a indicadores colorimétricos y ensayos inmunoenzimáticos en formato de micromatriz. Utilizando discos compactos y chips de policarbonato como plataforma de ensayo, se ha logrado la detección mediante dispositivos electrónicos de consumo, como un lector de discos, escáner documental y teléfono móvil. Para demostrar sus capacidades, los sistemas resultantes se aplicaron a la identificación de SNPs en muestras humanas, asociados a terapias antitabaquismo, para depresión y enfermedades relacionadas con la coagulación de la sangre. Tras seleccionar las condiciones adecuadas, todas las estrategias estudiadas discriminaron SNPs en muestras conteniendo tan solo 100 copias de ADN genómico, con una tasa de error inferior al 15%. Más importante, los métodos desarrollados han reducido los tiempos de ensayo a valores entre 70 y 140 minutos, a un coste similar a un análogo convencional basado en la reacción en cadena de la polimerasa (PCR), pero manteniendo o aumentando la eficiencia de amplificación y eliminando la necesidad de termocicladores y escáneres de fluorescencia. En conclusión, los biosensores basados en reacciones isotérmicas y dispositivos de electrónica de consumo mejoran en gran medida la competitividad del análisis POC de ADN. Se ha demostrado que las tecnologías desarrolladas en esta tesis podrían apoyar los ensayos de genotipado en áreas de recursos escasos, como centros de atención primaria y países emergentes. A través de esta democratización de las pruebas genéticas y realización estudios de asociación adecuados, el diagnóstico molecular y las prácticas en medicina personalizada podrían extender su aplicación a la rutina clínica. / [CA] La determinació de biomarcadors genètics és cada vegada més extensa i popular, estant fins i tot comercialitzant-se kits per a medicina personalitzada. Establir les variacions específiques en el genotip de cada pacient, com els polimorfismes d'un sol nucleòtid (SNP) podria ser una eina fonamental en el camp del diagnòstic, pronòstic i selecció de la teràpia. No obstant això, l'ús de proves d'ADN no es troba completament implementat en l'atenció mèdica general, principalment a causa de les barreres tècniques i econòmiques associades a les tecnologies actuals, limitades solament a centres especialitzats i grans hospitals. En aquesta tesi, l'objectiu principal va ser superar aquests obstacles mitjançant el desenvolupament de sistemes de genotipat point-of-care (POC), més simples, ràpids i assequibles. La discriminació al·lèlica es va aconseguir mitjançant l'ús de reaccions enzimàtiques isotermes, com l'amplificació de la recombinasa polimerasa (RPA), la lligació de oligonucleòtids i l'amplificació isotèrmica mediada per bucle (LAMP). Aquests processos es van integrar a indicadors colorimètrics i assajos inmunoenzimàtics en format de micromatriu. Utilitzant discos compactes i xips de policarbonat com a plataforma d'assaig, s'ha conseguit la detecció mitjançant dispositius electrònics de consum, com un lector de discos, escàner documental i telèfon mòbil. Per a demostrar les seues capacitats, els sistemes resultants es van aplicar a la identificació de polimorfismes en mostres humanes, associats a teràpies antitabaquisme, per a depressió i malalties relacionades amb la coagulació de la sang. Després de seleccionar les condicions adequades, totes les estratègies estudiades van ser capaces de discriminar SNPs en mostres contenint tan sols 100 còpies d'ADN genòmic, amb una taxa d'error inferior al 15%. Més important, els mètodes desenvolupats han reduït els temps d'assaig a valors entre 70 i 140 minuts, a un cost similar a un anàleg convencional basat en la reacció en cadena de la polimerasa (PCR), però mantenint o augmentant l'eficiència d'amplificació i eliminant la necessitat de termocicladors i escàners de fluorescència. En conclusió, els biosensors basats en reaccions isotèrmiques i dispositius d'electrònica de consum milloren en gran manera la competitivitat de l'anàlisi POC del ADN. S'ha demostrat que les tecnologies desenvolupades en aquesta tesi podrien donar suport als assajos de genotipat en àrees de recursos escassos, com a centres d'atenció primària i països emergents. A través d'aquesta democratització de les proves genètiques i realització estudis d'associació adequats, el diagnòstic molecular i les pràctiques en medicina personalitzada podrien estendre la seua aplicació a la rutina clínica. / [PT] A determinação de biomarcadores genéticos está tornando-se cada vez mais extensa e popular, sendo comercializada até em kits para medicina personalizada. O estabelecimento de variações específicas de genotipo para cada paciente, tais como os polimorfismo de nucleotídeo único, pode ser uma ferramenta fundamental no campo do diagnóstico, prognóstico e seleção de terapias. No entanto, o uso de testes de DNA ainda não encontra-se totalmente implementado na área de saúde geral, principalmente devido às barreiras técnicas e econômicas associadas às tecnologias atuais, limitadas apenas a centros especializados e grandes hospitais. Nesta tese, o principal objetivo foi superar esses obstáculos desenvolvendo sistemas de genotipagem point-of-care (POC) de DNA, mais simples, rápidos e acessíveis. A discriminação de alelos foi alcançada empregando reações enzimáticas isotérmicas, como amplificação por recombinase polimerase (RPA), ligação de oligonucleotídeos e amplificação isotérmica mediada por loop (LAMP). Tais processos foram integrados a indicadores colorimétricos e ensaios imunoenzimáticos, em formato micromatriz. Usando discos compactos e chips de policarbonato como plataforma de ensaio, os analitos foram detectados através de dispositivos eletrônicos de consumo, como leitor de disco, scanner de mesa e smartphone. Para demonstrar suas capacidades, os sistemas resultantes foram aplicados para identificação de polimorfismos em amostras de DNA humano, associados a terapias antitabagismo, para depressão e doenças relacionadas à coagulação do sangue. Após a seleção das condições adequadas, todas as estratégias estudadas foram capazes de discriminar SNPs em amostras contendo até 100 cópias de DNA genômico, com uma taxa de erro inferior a 15%. Mais importante, os métodos desenvolvidos reduziram o tempo de ensaio a valores entre 70 e 140 minutos, com um custo similar a um método análogo baseado em reação em cadeia da polimerase (PCR), mas mantendo ou aumentando a eficiência da amplificação e eliminando a necessidade de cicladores de temperatura e scanners de fluorescência especializados. Em conclusão, os biosensores baseados em reações enzimáticas isotérmicas e dispositivos eletrônicos de consumo incrementam grandemente a competitividade da análise POC de DNA. Foi demonstrado que as tecnologias desenvolvidas nesta tese poderiam dar suporte a ensaios de genotipagem em lugares com poucos recursos, como centros de atenção primária e países emergentes. Através desta democratização dos testes genéticos e com a realização de estudos de associação adequados, o diagnóstico molecular e as práticas de medicina personalizada poderiam ter sua aplicação extendida à rotina clínica. / The authors acknowledge the financial support received from the Generalitat Valenciana (GVA-PROMETEOII/2014/040 Project and GRISOLIA/2014/024 PhD grant) and the Spanish Ministry of Economy and Competitiveness (MINECO CTQ2013-45875-R project) / Yamanaka, ES. (2020). Isothermal-based DNA biosensors for application in pharmacogenetics [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/148366 / TESIS / Compendio

This study sought to understand factors driving repurchase intentions for consumer electronics (CE) hardware and in particular mobile phones. The outcome of the study was expected to be of interest in academia and practice because it develops upon existing literature and identifies actionable variables that could be used to optimise market offerings. Based on a literature review it was hypothesised that the intent was driven by hedonic and utilitarian factors. These included conspicuousness and visibility; product bundling; reliability; technological features, usability of the product and the buyers’ age. The study tested these hypotheses using primary data. The method was employed to confirm the postulated drivers as well as to determine the direction of the effects. Data collection was conducted through a cross sectional internet survey enumerated in August 2010. The survey reached a broad sample of 144 responders. The analysis supported two of the six hypothesised drivers. The supported drivers were conspicuousness and usability. The recommendation was therefore to encourage the CE industry to focus on creating aesthetically appealing, fashionable devices that were intuitively easy to use requiring minimal assistance or product manuals. It also recommends that less emphasis be placed on durability, advanced features, on bundling additional extras and on targeting particular age groups. Copyright / Dissertation (MBA)--University of Pretoria, 2012. / Gordon Institute of Business Science (GIBS) / unrestricted

Most companies' desire is to create customer relationships and the working methods have changed as a result of the increased e-commerce. Because of digitalization, the retailing field has changed dramatically. Consequently, physical stores are facing competition from online companies. Previous literature has stated that physical stores now have to focus on what happens inside the store in order to generate a pleasant experience. The research question focused on examining how Elgiganten, the largest consumer electronic store in Sweden, use customer experience and customer value in order to influence store attractiveness. This was carried out by using a qualitative approach, an exploratory nature and by conducting in-depth interviews with consumers and the company's head managers. The main findings of this study suggest that customers can not take advantage of some services when buying through e-commerce. This ability to provide service is an important part of the handling of competition from e-commerce. The retailers need to find the right balance between engagement and emotions in the physical retail environment in order to appeal to the consumers’ desires of trust &amp; reliability in order to create an attractive experience point. By means of this, the thesis emphasised the imperative of creating experience in offline retailing.

This thesis develops a method to optimize the inventory-related performance of a VMI (Vendor Managed Inventory) in retailing environments, for two successive products with overlapping lifecycles, under stock-dependent demand. The study refers to existing research in different fields, such as inventory policies and VMIs, retailing of substitutable products, stock-dependent demands and product lifecycle management. However, no study encompassing all these research streams could be found, and thus an abductive approach is developed, aiming at building new theory. The thesis draws upon a case study at Sony Germany, which has started an ambitious VMI initiative with the largest retailer of consumer electronics products in Germany. First, stock and sales data available, along with insights collected among employees, is used to understand the key profit-drivers when lifecycles of the two products overlap, and a set of indicators is propounded to measure them. The pattern of sales in relation to inventories of the two products is studied, and results in the validation of the stock-dependent demand assumption, with demand following a Poisson distribution of parameter λ [on-hand stock]. Demand for the new product is also found to be negatively affected by stock levels of the old product, in an exponential way. Second, a model is built and a scenario- based simulation embedding the patterns previously established is performed to evaluate different strategies to steer the stock levels in the VMI. Scenarios are evaluated against the proposed set of indicators, but no scenario is found to over perform consistently the others. Nevertheless interesting patterns emerge and it is possible to relate the performance observed to specificities of scenarios and product contexts. Using the patterns identified, a set of guidelines is suggested, along with proposals for practical implementation.

This thesis developed out of my personal curiosity on the subject of high-technological development. Specifically, high-technology’s shift from primarily a military tool to a consumer product raised several questions to answer since first taking an interest in the subject. My lifestyle, like many other Americans in my generation, incorporates computers, cell-phones, and video game consoles as not only an innovative tool, but a standard and necessary mode of production. In our contemporary society, technology is obtainable everywhere. As an entertaining tool in the form of video games to a productivity tool in our workplaces, most individuals have assimilated consumer electronics. Yet this essay seeks to look at the beginning of these changes in the late 1970’s and 1980’s. Particularly, how did an American society that based itself around industrial mechanisms suddenly become so enthralled by consumer electronics, which a decade before were used for missile guidance and complex mathematical calculations? How did these devices, which were initially proposed as an industrial and political efficiency tool, suddenly become a labeled consumer luxury good? The answer to these questions surprisingly developed into a more complex socioeconomic analysis of 1970’s and 1980’s behaviors that utilized a Marxist interpretation of the relationship between technology and the human experience. This topic incorporates terms and theories from a variety of academic subjects. While this essay is formed around a historical narrative and argument, much of the evidence is acquired from economical, sociological, and psychological resources. As a result, I hope readers of this essay will find it as enlightening and enjoyable as my own personal journey within the subject.

Yes / The ever-increasing demand for high performance electronic and computer systems has unequivocally called for increased microprocessor performance. However, increasing microprocessor performance requires increasing the power and on-chip power density of the microprocessor, both of which are associated with increased heat dissipation. In recent times, thermal management of electronic systems has gained intense research attention due to increased miniaturization trend in the electronics industry. In the paper, we present a numerical study on the performance of a convective-radiative porous heat sink with functionally graded material for improved cooling of various consumer electronics. For the theoretical investigation, the thermal property of the functionally graded material is assumed as a linear and power-law function. We solved the developed thermal models using the Chebyshev spectral collocation method. The effects of inhomogeneity index of FGM, convective and radiative parameters on the thermal behaviour of the porous heat sink are investigated. The present study shows that increase in the inhomogeneity index of FGM, convective and radiative parameter improves the thermal efficiency of the porous fin heat sink. Moreover, for all values of Nc and Rd, the temperature gradient along the fin of FGM is negligible compared to HM fin in both linear and power-law functions. For comparison, the thermal predictions made in the present study using Chebyshev spectral collocation method agrees excellently with the established results of Runge-Kutta with shooting and homotopy analytical method. / Supported in part from PhD sponsorship of the first author by the Tertiary Education Trust Fund of the Federal Government of Nigeria.