No description available.

<P> The equilibrium behavior of the boundaries separating the a and y crystalline phases in the copper zinc alloy system is investigated by measuring the magnitude, the relative anisotropy and the temperature dependence of the interfacial energies. A model, consistent with the interfacial energetics, is proposed and supported by observations of misfit dislocations at the boundary. The migration kinetics of the y/β interface are determined for both dendritic and polyhedral morphologies and the atomic mechanisms of growth are inferred from the. internally faulted ordered y precipitates. </p> / Thesis / Doctor of Philosophy (PhD)

La mucoviscidose est la maladie génétique la plus fréquente dans la population caucasienne. Le genre Scedosporium se situe au deuxième rang parmi les champignons filamenteux isolés des expectorations dans ce contexte. Au niveau pulmonaire, les colonisations/infections entraînent le recrutement de phagocytes qui induisent un stress oxydatif normalement délétère pour les pathogènes. Pour se défendre, ceux-ci ont développé des systèmes antioxydants, notamment diverses enzymes. Ce travail de thèse visait à étudier la réponse au stress oxydatif chez Scedosporium. Tout d’abord, la capacité à germer en présence d’oxydants a été évaluée. Par la suite, trente-trois gènes potentiellement impliqués dans la défense contre le stress oxydatif ont été identifiés. Leur expression en présence d’oxydants et en co-cultures avec des phagocytes suggère un rôle majeur, notamment pour une catalase, une peroxyrédoxine et deux thiorédoxine réductases. Par ailleurs, un mutant défectif pour un gène codant une superoxyde dismutase (SOD) pariétale et spécifique des spores a été produit. L’auranofin, un inhibiteur des thiorédoxine réductases, présente une activité vis-à-vis des Scedosporium et un effet additif avec des triazolés. Un test ELISA a été développé pour le sérodiagnostic des scédosporioses, utilisant une catalase et une Cu/Zn-SOD recombinantes. Ce test sensible et spécifique permet de distinguer les infections à Scedosporium de celles à Aspergillus fumigatus et des colonisations à Scedosporium. Au final, ces résultats indiquent un rôle majeur des enzymes antioxydantes chez Scedosporium, qui pourraient être de véritables facteurs de virulence et donc de nouvelles cibles thérapeutiques. / Cystic fibrosis (CF) is the most common genetic disease in Caucasian populations. The Scedosporium genus ranks the second among the filamentous fungi colonizing the airways of CF patients. In the respiratory tract, colonizations/infections lead to the recruitment of phagocytes which produce an oxidative stress, usually deleterious for pathogens. To defend themselves, pathogens have developed protective antioxidant systems, especially various enzymes. This thesis aimed to study the oxidative stress response in Scedosporium species. First, capacity of several Scedosporium isolates to germinate upon oxidative stress conditions was evaluated. Then, thirty-three genes potentially involved in protection against the oxidative stress were identified. Their overexpression in response to oxidants and in co-cultures with phagocytes suggested a crucial role, especially for one catalase, one peroxiredoxin and the two thioredoxin reductases. A mutant defective for the gene encoding a superoxide dismutase (SOD) anchored to the cell wall and specific for the conidia was produced. Auranofin, a thioredoxin reductase inhibitor, exhibits little anti-Scedosporium activity and an additive effect with triazole drugs. An ELISA was developed for serodiagnosis of scedosporiosis, using recombinant proteins derived from one catalase and a Cu/Zn-SOD. This sensitive and specific assay allows to differentiate Scedosporium infections from Aspergillus fumigatus infections and Scedosporium colonizations. Finally, these results indicate a crucial role of antioxidant enzymes in Scedosporium species, which could therefore be considered as virulence factors and as possible new therapeutic targets.

Ce travail porte sur la préparation et la caractérisation de catalyseurs bimétalliques Cu-Zn, Ni-Zn et Fe-Zn supportés sur TiO2 avec des rapports atomiques variables et sur l'étude de leurs propriétés catalytiques pour l'hydrogénation sélective d'hydrocarbures polyinsaturés. Les méthodes de co-dépôt-précipitation à l'urée (DPu) et co-dépôt-précipitation à pH fixe (DP8) ont été utilisées pour la préparation des matériaux. Les ions métalliques se déposent séquentiellement sur la surface de TiO2 (selon la séquence CuII < ZnII ?FeII <NiII) durant la méthode DPu, alors qu'ils se déposent simultanément en utilisant la méthode DP8. Après réduction de l'échantillon à une température appropriée (350°C pour Cu-Zn, 450°C pour Ni-Zn et 500°C pour Fe-Zn), les analyses par DRX et STEM-HAADF couplé à EDS ont montré que des nanoparticules bimétalliques étaient formées pour les systèmes Cu-Zn/TiO2 (alliage Cu3Zn1 ou Cu0.9Zn0.1) et Ni-Zn/TiO2 (alliage Ni1Zn1 ou Ni4Zn1) avec une taille moyenne de particule inférieure à 5 nm. Seul du fer métallique a été détecté par DRX dans le cas de Fe-Zn/TiO2. Zn est inactif pour l'hydrogénation sélective du butadiène et agit comme un modificateur des catalyseurs monométalliques dont l'activité suit la séquence: Cu < Fe < Ni. L'ajout de Zn diminue légèrement l'activité, influence la sélectivité en butènes, mais augmente fortement la stabilité des catalyseurs. Cette plus grande stabilité des catalyseurs bimétalliques a été attribuée à la formation d'une quantité inférieure de dépôt carboné pendant la réaction, ceci résultant de la modification de la taille des ensembles de surface du métal actif par alliage avec Zn. / This work investigates the preparation and characterization of titania-supported non-noble bimetallic Cu-Zn, Ni-Zn and Fe-Zn catalysts with various atomic ratios and their catalytic properties for the selective hydrogenation of polyunsaturated hydrocarbons. Co-deposition-precipitation with urea (DPu) and co-deposition-precipitation at fixed pH (DP8) methods were employed for the samples preparation. The metal ions were sequentially deposited onto the TiO2 surface (the sequence of pH for ions deposition being CuII < ZnII ≈FeII < NiII) during the DPu, while they were simultaneously deposited using DP8 method. After sample reduction at proper temperature (350 °C for Cu-Zn, 450 °C for Ni-Zn and 500 °C for Fe-Zn), XRD and STEM-HAADF coupled with EDS showed that bimetallic nanoparticles were formed in Cu-Zn/TiO2 (Cu3Zn1 or Cu0.9Zn0.1 alloy) and Ni-Zn systems (Ni1Zn1 or Ni4Zn1 alloy) with average particle size smaller than 5 nm. Only metallic Fe was detected by XRD in Fe-Zn/TiO2. Zn is inactive for butadiene selective hydrogenation, and acts as a modifier of the monometallic catalysts whose activity follows the sequence: Cu < Fe < Ni. The addition of Zn slightly decreases the activity and influences the selectivity to butenes, but provides much more stable catalysts. The higher stability of the bimetallic catalysts was ascribed to the formation of lower amount of carbonaceous species during the reaction, resulting from the change in the size of the active metal surface ensembles by alloying with Zn.

Fundação de Amparo a Pesquisa no Estado do Rio Grande do Sul / Propylene is a chemical compound with high value added, widely used in the industry and usually obtained from petroleum. However, there is the need of the development of alternative routes for the production of this compound from renewable sources. The use of acetone for the production of propylene is a good option, because this oxygenated compound can be obtained by biomass conversion. The use of a one step process also adds an advantage to the propylene production from acetone, uniting in a single reactor two consecutive reactions: acetone hydrogenation, followed by dehydration of the formed isopropanol. For this, there are necessary two catalysts with distinct properties, one containing metallic sites, for hydrogenation, and another where there are acidic sites, for dehydration. The main objective of this work is to obtain propylene from acetone in one single step, using Cu/Zn/Al mixed oxide derived from hydrotalcite-like compounds and acid form of Beta zeolite as catalysts. For that, the catalysts were obtained by the coprecipitation method at variable pH followed by calcination, for the mixed oxide, and by hydrothermal synthesis, for the zeolite. The catalysts were also characterized as their with distinct properties. The hydrogenation and dehydration reactions have been studied individually and together by varying the catalyst or mixture of catalysts employed and the composition and flow rate of the feed. First, they were evaluated the thermodynamic boundaries of the reaction systems in which was observed that the acetone hydrogenation is strongly limited by the equilibrium and which are the preferential products of each reaction. For the reaction test, it was used the factorial experimental design, where the feeding conditions and reaction temperature were varied, and as response variables it was obtained the composition of the organic fraction at the reactor outlet. In the hydrogenation reaction, only isopropanol was obtained and the acetone conversion was close to that of equilibrium. In the dehydration reaction of isopropanol, propylene was preferably formed, with only small concentrations of diisopropyl ether at low temperatures, being obtained complete alcohol conversion in some experimental conditions. The complete process of acetone conversion into propylene was carried out at eleven distinct experimental conditions and the olefin fraction was up to 65 % of the organic fraction. It was possible the parameters estimation of simplified kinetic models, considering the Langmuir-Hinshelwood hypothesis, appropriate to the prediction of the molar fractions of the compounds in the organic fraction for both individual as simultaneous reactions. The kinetic models were used to the analysis of the effect of process variables on the reaction products in the three reaction systems considered. / O propeno é um composto químico de alto valor agregado, largamente empregado na indústria e obtido, geralmente, a partir do petróleo. Entretanto, há a necessidade do desenvolvimento de rotas alternativas para a produção deste composto a partir de fontes renováveis. A utilização de acetona para a produção de propeno é uma boa opção, pois este composto oxigenado pode ser obtido através de conversão da biomassa. A utilização de processo em uma única etapa acrescenta, ainda, mais uma vantagem à produção de propeno a partir de acetona, unindo em um único reator duas reações consecutivas: hidrogenação de acetona, seguida da desidratação do isopropanol formado. Para tanto, são necessários dois catalisadores com propriedades distintas, um deles contendo sítios metálicos, para a hidrogenação, e outro onde haja sítios ácidos, para a desidratação. O objetivo principal deste trabalho é a obtenção de propeno a partir de acetona em uma única etapa, utilizando óxido misto de Cu/Zn/Al derivado de material do tipo hidrotalcita e forma ácida da zeólita Beta como catalisadores. Para isso, os catalisadores foram obtidos pelo método de coprecipitação a pH variável seguido de calcinação, para o óxido misto, e pela síntese hidrotérmica, para a zeólita. Os catalisadores foram, ainda, caracterizados quanto às suas propriedades físicoquímicas. As reações de hidrogenação e desidratação foram estudadas individualmente e em conjunto variando-se o catalisador ou mistura de catalisadores empregados e a composição e vazão da alimentação. Primeiramente, foram avaliados os limites termodinâmicos dos sistemas reacionais, em que se observou que a hidrogenação de acetona é fortemente limitada pelo equilíbrio e quais são os produtos preferenciais de cada reação. Para os testes reacionais foi utilizado planejamento de experimentos fatorial, onde as condições de alimentação e temperatura de reação foram variadas, e como variáveis resposta obteve-se a composição da fração orgânica na saída do reator. Na reação de hidrogenação, apenas isopropanol foi obtido e a conversão de acetona foi próxima daquela de equilíbrio. Na reação de desidratação de isopropanol, o propeno foi formado preferencialmente, com apenas pequenas concentrações de éter di-isopropílico a baixas temperaturas, sendo obtidas conversões completas do álcool em algumas condições experimentais. O processo completo de conversão de acetona em propeno foi realizado em onze condições experimentais distintas e a fração de olefina foi de até 65 % da fração orgânica. Foi possível a estimação dos parâmetros de modelos cinéticos simplificados, considerando as hipóteses de Langmuir-Hinshelwood, adequados à predição das frações molares dos compostos na fração orgânica tanto para as reações individuais como simultâneas. Os modelos cinéticos foram utilizados para a análise do efeito das variáveis de processo sobre os produtos de reação nos três sistemas reacionais considerados.

The West Ansil deposit was the first Cu discovery in 25 years in the Noranda Central Camp. It has a combined indicated and inferred resource of ~1.2 Mt. Grades for the indicated resource are 3.4% Cu, 0.4% Zn, 1.4 g/t Au and 9.2 g/t Ag. The bulk of the resource is located in three massive sulphide lenses (Upper, Middle and Lower) that are entirely within the Rusty Ridge Formation above the Lewis exhalite. The mineralization in all three ore lenses consists of massive pyrrhotite + chalcopyrite + magnetite. Semi-massive sphalerite is restricted to the upper and lower parts of the Middle lens. Massive magnetite occurs at the center of the Upper and Middle lenses, where it replaces massive pyrrhotite. A striking feature of West Ansil is the presence of abundant colloform and nodular pyrite (+marcasite) in the massive sulphides. Late-stage replacement of massive pyrrhotite by colloform pyrite and marcasite, occurs mostly along the upper and lower contacts of the lenses.

The West Ansil deposit was the first Cu discovery in 25 years in the Noranda Central Camp. It has a combined indicated and inferred resource of ~1.2 Mt. Grades for the indicated resource are 3.4% Cu, 0.4% Zn, 1.4 g/t Au and 9.2 g/t Ag. The bulk of the resource is located in three massive sulphide lenses (Upper, Middle and Lower) that are entirely within the Rusty Ridge Formation above the Lewis exhalite. The mineralization in all three ore lenses consists of massive pyrrhotite + chalcopyrite + magnetite. Semi-massive sphalerite is restricted to the upper and lower parts of the Middle lens. Massive magnetite occurs at the center of the Upper and Middle lenses, where it replaces massive pyrrhotite. A striking feature of West Ansil is the presence of abundant colloform and nodular pyrite (+marcasite) in the massive sulphides. Late-stage replacement of massive pyrrhotite by colloform pyrite and marcasite, occurs mostly along the upper and lower contacts of the lenses.

The West Ansil deposit was the first Cu discovery in 25 years in the Noranda Central Camp. It has a combined indicated and inferred resource of ~1.2 Mt. Grades for the indicated resource are 3.4% Cu, 0.4% Zn, 1.4 g/t Au and 9.2 g/t Ag. The bulk of the resource is located in three massive sulphide lenses (Upper, Middle and Lower) that are entirely within the Rusty Ridge Formation above the Lewis exhalite. The mineralization in all three ore lenses consists of massive pyrrhotite + chalcopyrite + magnetite. Semi-massive sphalerite is restricted to the upper and lower parts of the Middle lens. Massive magnetite occurs at the center of the Upper and Middle lenses, where it replaces massive pyrrhotite. A striking feature of West Ansil is the presence of abundant colloform and nodular pyrite (+marcasite) in the massive sulphides. Late-stage replacement of massive pyrrhotite by colloform pyrite and marcasite, occurs mostly along the upper and lower contacts of the lenses.

Submitted by Kilvya Braga (kilvyabraga@hotmail.com) on 2018-04-19T11:38:41Z No. of bitstreams: 1 MIKARLA BAÍA DE SOUSA - DISSERTAÇÃO (PPGEQ) 2015.pdf: 2853939 bytes, checksum: 73cb4a3ae1a6f5afdefa786c3032de07 (MD5) / Made available in DSpace on 2018-04-19T11:38:41Z (GMT). No. of bitstreams: 1 MIKARLA BAÍA DE SOUSA - DISSERTAÇÃO (PPGEQ) 2015.pdf: 2853939 bytes, checksum: 73cb4a3ae1a6f5afdefa786c3032de07 (MD5) Previous issue date: 2015-09-29 / CNPq / O processo de corrosão está constantemente transformando os materiais metálicos de modo que a durabilidade e o desempenho dos mesmos deixam de satisfazer os fins a que se destinam. Uma forma de se minimizar a corrosão em materiais metálicos é revesti-los com outros materiais. A eletrodeposição é um método muito utilizado na obtenção de revestimentos metálicos resistentes à corrosão e ao desgaste mecânico. Através da eletrodeposição é possível obter ligas metálicas, as quais são geralmente preparadas com o intuito de melhorar as propriedades dos seus constituintes iniciais. O estudo proposto tem como objetivo otimizar as variáveis de entrada (densidade de corrente e pH) e obter a liga CuZn-Ni resistente à corrosão, caracterizando-a quanto à morfologia, eficiência de corrente catódica, composição da liga, microdureza e resistência à corrosão. Para a otimização do processo de eletrodeposição da liga foi realizado um planejamento fatorial completo 32. Avaliou-se quantitativamente a influência das variáveis de entrada bem como suas possíveis interações com a realização mínima de experimentos. Estudou-se o processo de eletrodeposição de liga Cu-Zn-Ni sobre um cátodo, utilizando um banho contendo sulfato de cobre, sulfato de zinco, sulfato de níquel e citrato de sódio. Todos os experimentos foram realizados em temperatura ambiente e em triplicata, os valores ótimos encontrados através da polarização potenciodinâmica linear foram: densidade de corrente catódica de 30 mA/cm2 e pH 6,0; com esses parâmetros foi possível alcançar um potencial de corrosão de -0,31949 V, uma resistência à polarização de 948090 Ω e uma corrente de corrosão de 6,4265 nA. Os ensaios de impedância eletroquímica confirmaram os resultados obtidos pelos ensaios de polarização potenciodinâmica linear. A composição média deste depósito foi 56 w.t.% de Cu, 38 w.t.% de Zn e 6 w.t. % de Ni. As ligas encontradas apresentaram brilho, aderência e boa resistência à polarização e através da difração de raios-x concluiu-se que a liga obtida é cristalina. O estudo da morfologia acusou a presença de nódulos esféricos de vários tamanhos na superfície da liga. A composição química dos revestimentos parece ser o fator mais importante para a microdureza dos revestimentos, já que o experimento com maior conteúdo de zinco apresentou o valor mais elevado de microdureza, que foi de 571 HV. Estas ligas podem ter grande utilidade em várias aplicações nas indústrias químicas, petrolíferas, petroquímicas, navais, de construções civis e automobilísticas em decorrência de algumas características especiais, como alta resistência à corrosão e ao desgaste e ao baixo sobrepotencial de evolução do hidrogênio da liga Cu-Zn-Ni. / The corrosion process is constantly transforming metallic materials, so that their durability and behavior no longer satisfy their goals. One way to minimize corrosion in metallic materials is to coat them with other materials. Electrodeposition is a widely used method in obtaining metallic coatings resistant to corrosion and mechanic wear. Through electrodeposition, it is possible to obtain alloys, which are generally prepared in order to improve the characteristics of their initial constituents. The proposed study has, as a goal, to optimize the input variables (current density and pH), and obtain the Cu-Zn-Ni alloy resistant to corrosion. A 32 experimental design was used to optimize the electrodeposition process. Both the input variable influence, and their possible interactions, performing less experiments as possible, were quantitatively evaluated. The electrodeposition process of the Cu-Zn-Ni on a cathode was studied, using a bath containing copper sulfate, zinc sulfate, nickel sulfate and sodium citrate. All experiments were conducted at room temperature and in triplicate. The best reached values, through linear potentiodynamic polarization, were: cathode current density of 30 mA/cm2 and pH 6.0; with those parameters, it was possible to reach a potential of -0.31949 V, a 948090 Ω polarization resistance, and a 6.4265 nA current density. Electrochemical impedance spectroscopy confirms the linear potentiodynamic polarization results. Its chemical composition, in average, was 56 w.t. % of Cu, 38 w.t.% of Zn, and 6 w.t.% of Ni. Those found alloys showed bright, adherence and good resistance to polarization, and, through X-ray diffraction, it is concluded that the alloy is crystalline. The morphology study pointed out the presence of spherical nodules with different sizes on the alloy surface. The chemical composition of the coatings seems to be the most important factor for the coatings microhardness, since the experiment with the highest zinc content showed the highest microhardness value, which was 571 HV. Those alloys may have great utility in many applications in chemical, oil, petrochemical, naval industries, civil construction and automobile industries, because of some special characteristics, such as high resistance to corrosion and wear, and low overpotential for hydrogen evolution reaction of the Cu-Zn-Ni alloy.

The West Ansil deposit was the first Cu discovery in 25 years in the Noranda Central Camp. It has a combined indicated and inferred resource of ~1.2 Mt. Grades for the indicated resource are 3.4% Cu, 0.4% Zn, 1.4 g/t Au and 9.2 g/t Ag. The bulk of the resource is located in three massive sulphide lenses (Upper, Middle and Lower) that are entirely within the Rusty Ridge Formation above the Lewis exhalite. The mineralization in all three ore lenses consists of massive pyrrhotite + chalcopyrite + magnetite. Semi-massive sphalerite is restricted to the upper and lower parts of the Middle lens. Massive magnetite occurs at the center of the Upper and Middle lenses, where it replaces massive pyrrhotite. A striking feature of West Ansil is the presence of abundant colloform and nodular pyrite (+marcasite) in the massive sulphides. Late-stage replacement of massive pyrrhotite by colloform pyrite and marcasite, occurs mostly along the upper and lower contacts of the lenses.