The thesis is focused on the assessment of two wooden roof structures of the building, which is located in Brno on the street Rumiště 8. Parts of the work are also theoretical knowledge of roof structures, building technical survey and diagnostic methods. Rating roof truss was based on a survey of sensory and instrumental methods. In the first step were measured dimensions of roof truss members and were determined roof structures. In the next section was researched damage of elements and his causes. Rehabilitation solution was established for each type of damage to the components resist any attack as long as possible. This report had been prepared for the property owner who plans complete reconstruction.

The thesis Diagnostic of induction motor with regard to its maintenance and reliability aims to be a theoretical preparation and application of online diagnostics. It is trying to map correlations between electromechanical system failures driven by induction motor and output information of the diagnostic method. It mainly focuses on spectrum analysis of stator current which carries information on the induction motor status in the form of characteristic signatures in the spectrum (Motor Current Signature Analysis). The theoretical part deals with the concept of diagnostics and mainly with the operational diagnostics, it classifies and characterises types of induction motor failure and it accordingly processes diagnostic methods. This all is done with regard to the application of the maintenance and inspection of machines in a manufacturing company. The practical part develops methodology and measurement procedure. Several measurements demonstrate, validate and apply the MCSA method. It simulates abnormalities and searches for their correlations in the spectrum stream. First, a motor powered from electric distribution network is measured and then the MCSA method is applied to motors powered from frequency converters.

This diploma thesis deals with the building survey and diagnosis of the station building of a railway station in Vítkovice. It describes process of survey and evaluation of existing reinforced concrete structures and used diagnostic methods. The survey of the object is described in the practical part of the thesis, which involves location of testing spots, taking the samples for testing from the structure, laboratory testing and evaluation of the results – determination of compressive strength of concrete with classification of concrete and elastic modulus. The last part includes static calculation of selected part of the structure.

The diploma thesis in theoretical section is focused on a brief overview of the methods used in the diagnostic of reinforced concrete structures. The practical part of this thesis deals with the diagnostics of the manufacturing reinforced concrete buildings in the complex Fatra Napajedla. This part will provide concrete strength of existing structures and will verify the reinforcement of individual elements of the structure by means of modern devices – radar and electromagnetic rebar locator. In the final section of this thesis will be performed static reports of selected parts of the structure.

Introdução: A cardiomiopatia hipertrófica (CMH) é definida, como a hipertrofia miocárdica ocorrida na ausência de doença cardíaca ou sistêmica, sendo a mais prevalente das cardiopatias de transmissão genética e a principal causa de morte súbita em jovens e atletas. A única opção de tratamento para prevenção dessa complicação é a indicação do cardiodesfibrilador implantável (CDI). Alguns marcadores de risco foram identificados, como: pacientes que sobreviveram à parada cardíaca por fibrilação ventricular, episódio de taquicardia ventricular sustentada; história familiar precoce de MSC; síncope inexplicada; espessura septal >= 30 mm; taquicardia ventricular não sustentada (TVNS) no Holter; queda da pressão sistólica (PAS) > 20 mmHg ou aumento < 20 mmHg no esforço. Entretanto, a sensibilidade e especificidade desses critérios são limitadas, tornando necessário o conhecimento de novos métodos diagnósticos com capacidade de predizer MSC. A micro-alternância da onda T (MAOT) é utilizada como ferramenta diagnóstica na estratificação de pacientes com riscos de desenvolver arritmias ventriculares malignas e MSC auxiliando na indicação do CDI. Na CMH há poucos estudos realizados com objetivos e resultados diferentes e, atualmente, uma nova metodologia na realização desses exames foi desenvolvida, não sendo testada nesta população. Os objetivos do presente estudo foram: caracterizar os valores da MAOT pela metodologia Média Móvel Modificada (MMM) e avaliar a associação de seus resultados com os fatores de risco clínicos para MSC. Metodologia: Foram selecionados 132 pacientes com CMH que foram divididos em dois grupos: 1) Alto Risco, 67 pacientes, que apresentavam, pelo menos, um fator de risco para morte súbita cardíaca (história familiar de morte súbita; síncope inexplicada; espessura septal do miocárdio >=30 mm; taquicardia ventricular não sustentada; queda da pressão sistólica no teste de esforço) e 2) Baixo Risco, 65 pacientes, sem fatores de risco. A idade média foi de 37 ± 11,3 anos, sendo 63% do sexo masculino. A média da espessura de septo interventricular foi 23,9 ± 6,2 mm, da fração de ejeção 72 ± 8,1% e 26% apresentavam forma obstrutiva da doença. A MAOT foi avaliada pelo teste ergométrico com protocolo Naughton modificado, com dois fatores de atualização (FaT) 1/8 e 1/32, de forma quantitativa e qualitativa (positivo e negativo) e com três formas de análises: considerando todas as derivações do eletrocardiograma (plano periférico, frontal e ortogonal); desconsiderando os resultados do plano periférico e desconsiderando as derivações ortogonais. Resultados: A aferição da MAOT com FaT 1/8 apresentou maior sensibilidade em comparação com FaT 1/32 (FaT 1/8 MAOTméd. = 69,2 uV a 78,2 uV vs FaT 1/32 MAOTméd. = 33,2 uV a 38,7 uV, p < 0,01), resultando nas análises quantitativas de valores maiores da micro-alternância (MAOTmáx. - FaT 1/8 = 528 uV vs 124 uV = FaT 1/32, p < 0,01) e na análise qualitativa maior número de exames positivos (MAOT positiva - FaT 1/8 = 57,5% vs 19,0% = FaT 1/32). Os pacientes do grupo Alto risco apresentavam maiores valores de MAOT (Alto Risco MAOT média = 101,4 uV vs 54,3 uV Baixo Risco, p < 0,001) e 84% apresentavam exame positivo (56/67). A MAOT mostrou associação significativa com os fatores de risco para MSC: espessura septal >= 30 mm (p < 0,001), TVNS no Holter 24 h (p = 0,001), história familiar de MSC (p = 0,006) e queda da pressão arterial no esforço (p = 0,02). No rastreamento de pacientes de Alto risco, com ponto de corte de 53 uV o teste apresentou sensibilidade e especificidade de 84% e 71%, com acurácia de 0,77 (IC de 95%: 0,69 a 0,86). Conclusões: Os melhores resultados da MAOT pela metodologia Média Móvel Modificada foram encontrados analisando todas as derivações eletrocardiográficas (plano periférico, horizontal e derivações ortogonais), realizados de forma quantitativa, com Fator de Atualização 1/8 e ponto de corte para positividade 53 uV. A MAOT demonstrou associação significativa com a maioria dos fatores de risco clínicos apresentando boa acurácia no rastreamento dos pacientes de Alto Risco para MSC / Introduction: Hypertrophic cardiomyopathy (HCM) is defined as the myocardial hypertrophy in the absence of cardiac or systemic disease, being the most common genetic transmission cardiopathy and responsible for sudden cardiac death (SCD) in young adults and athletes. The first-line treatment option for prevention of SCD is the implantable cardioverter-defibrillator (ICD). Some clinical factors have been identified as high risk for the occurrence of SCD: history of cardiac resuscitation for ventricular fibrillation, episode of sustained ventricular tachycardia, family history of premature SCD, unexplained syncope, ventricular septal thickness >= 30 mm; nonsustained ventricular tachycardia (NSVT) in Holter and inadequate response of blood pressure to exercise: decrease in systolic blood pressure (SBP) > 20 mmHg or increase < 20 mmHg during effort. These criteria, however, are limited in sensitivity and specificity and new diagnostic methods have been required. The microvolt T-wave alternans (MTWA) is used as a diagnostic tool to identify high-risk patients predisposed to malignant ventricular arrhythmias and SCD. Therefore, MTWA may be helpful to indicate ICD. There are no reports in the literature concerning the use of MTWA in HCM. This research aims to evaluate the values of MTWA by modified moving average (MMA) method and the association with clinical factors for SCD. Methods: We enrolled 132 patients with HCM that were divided into two groups: 1) High Risk (HR) group, 67 patients, that had at least one risk factor for sudden cardiac death (family history of SCD; unexplained syncope; ventricular septal thickness >= 30 mm; nonsustained ventricular tachycardia; inadequate response of blood pressure to exercise) and 2) Low Risk (LR) group, 65 patients, without risk factors. The most participants were male (63%) and their mean age was 37 (± 11.3) years. All individuals were evaluated by echocardiography: 23,9 ± 6,2 mm interventricular septal thickness; 72 ± 8.1% ejection fraction and 26% left ventricular outflow gradient of more than 30 mmHg. Patients performed exercise stress testing with modified Naughton Protocol. In the present study, MTWA was assessed with the MMA method, updating factor (UF) 1/8 and 1/32, quantitative and qualitative way (positive and negative). In addition, the values of the MTWA were evaluated in three ways: all the leads of electrocardiogram; disregarding the leads of peripheral plane; disregarding the orthogonal leads. Results: The analysis of MTWA with UF 1/8 showed greater sensitivity compared with UF 1/32 (Mean MTWA, UF 1/8 = 69.2 uV to 78.2 uV vs UF 1/32 = 33.2 uV to 38.7 uV, p < 0.01). Like this, in quantitative and qualitative (positive and negative) analysis of MTWA, the values were larger in the group of UF 1/8 (UF1/8 = 528 uV vs UF 1/32 = 124 uV, p < 0.01/ Positive MTWA, UF 1/8 = 57.5% vs UF 1/32 = 19.0%, p < 0.01). The patients of High Risk group presents higher values of MTWA (HR = 101.4 uV vs LR = 54.3 uV, p < 0.001) and 84% had the positive test. The MTWA was significantly associated with risk factors for SCD: ventricular septal thickness >= 30 mm (p < 0.001), NSVT (p = 0.001), family history of SCD (p = 0.006), inadequate response of blood pressure to exercise (p = 0.02). In the analysis of high risk group, using a cutoff value of 53 uV, we observed a sensitivity of 84%, specificity of 71% and accuracy of 0.77 (95% confidence interval: 0.69 to 0.86). Conclusions: The best results of MTWA by MMA method were found by analyzing all lead ECG (frontal and peripheral plane and orthogonal leads), using UF 1/8, quantitative analysis and cut-off value 53 uV. The MTWA was significantly associated with clinical risk factors, showing a good accuracy, and can be used to effectively select high-risk patients for SCD

Next generation sequencing is a modern method applied in plant virology for sensitive detection of previously characterized and novel pathogens without any preceding knowledge of them. In this study three novel and two already described viruses were detected by de novo assembly of Illumina single-end reads ( Hi-Seq 2500 system) from total poly(A) enriched RNA of diseased red clover (Trifolium pratense) and indicator plant (Nicotiana occidentalis 37B). The complete genomic sequence of novel Red clover carlavirus A (RCCA) was determined from Illumina reads, 5´, 3´ RACE, cloning, RT-PCR and Sanger sequencing. The presence of RCCV was also confirmed in mechanically inoculated tobacco plant.

Introdução: A cardiomiopatia hipertrófica (CMH) é definida, como a hipertrofia miocárdica ocorrida na ausência de doença cardíaca ou sistêmica, sendo a mais prevalente das cardiopatias de transmissão genética e a principal causa de morte súbita em jovens e atletas. A única opção de tratamento para prevenção dessa complicação é a indicação do cardiodesfibrilador implantável (CDI). Alguns marcadores de risco foram identificados, como: pacientes que sobreviveram à parada cardíaca por fibrilação ventricular, episódio de taquicardia ventricular sustentada; história familiar precoce de MSC; síncope inexplicada; espessura septal >= 30 mm; taquicardia ventricular não sustentada (TVNS) no Holter; queda da pressão sistólica (PAS) > 20 mmHg ou aumento < 20 mmHg no esforço. Entretanto, a sensibilidade e especificidade desses critérios são limitadas, tornando necessário o conhecimento de novos métodos diagnósticos com capacidade de predizer MSC. A micro-alternância da onda T (MAOT) é utilizada como ferramenta diagnóstica na estratificação de pacientes com riscos de desenvolver arritmias ventriculares malignas e MSC auxiliando na indicação do CDI. Na CMH há poucos estudos realizados com objetivos e resultados diferentes e, atualmente, uma nova metodologia na realização desses exames foi desenvolvida, não sendo testada nesta população. Os objetivos do presente estudo foram: caracterizar os valores da MAOT pela metodologia Média Móvel Modificada (MMM) e avaliar a associação de seus resultados com os fatores de risco clínicos para MSC. Metodologia: Foram selecionados 132 pacientes com CMH que foram divididos em dois grupos: 1) Alto Risco, 67 pacientes, que apresentavam, pelo menos, um fator de risco para morte súbita cardíaca (história familiar de morte súbita; síncope inexplicada; espessura septal do miocárdio >=30 mm; taquicardia ventricular não sustentada; queda da pressão sistólica no teste de esforço) e 2) Baixo Risco, 65 pacientes, sem fatores de risco. A idade média foi de 37 ± 11,3 anos, sendo 63% do sexo masculino. A média da espessura de septo interventricular foi 23,9 ± 6,2 mm, da fração de ejeção 72 ± 8,1% e 26% apresentavam forma obstrutiva da doença. A MAOT foi avaliada pelo teste ergométrico com protocolo Naughton modificado, com dois fatores de atualização (FaT) 1/8 e 1/32, de forma quantitativa e qualitativa (positivo e negativo) e com três formas de análises: considerando todas as derivações do eletrocardiograma (plano periférico, frontal e ortogonal); desconsiderando os resultados do plano periférico e desconsiderando as derivações ortogonais. Resultados: A aferição da MAOT com FaT 1/8 apresentou maior sensibilidade em comparação com FaT 1/32 (FaT 1/8 MAOTméd. = 69,2 uV a 78,2 uV vs FaT 1/32 MAOTméd. = 33,2 uV a 38,7 uV, p < 0,01), resultando nas análises quantitativas de valores maiores da micro-alternância (MAOTmáx. - FaT 1/8 = 528 uV vs 124 uV = FaT 1/32, p < 0,01) e na análise qualitativa maior número de exames positivos (MAOT positiva - FaT 1/8 = 57,5% vs 19,0% = FaT 1/32). Os pacientes do grupo Alto risco apresentavam maiores valores de MAOT (Alto Risco MAOT média = 101,4 uV vs 54,3 uV Baixo Risco, p < 0,001) e 84% apresentavam exame positivo (56/67). A MAOT mostrou associação significativa com os fatores de risco para MSC: espessura septal >= 30 mm (p < 0,001), TVNS no Holter 24 h (p = 0,001), história familiar de MSC (p = 0,006) e queda da pressão arterial no esforço (p = 0,02). No rastreamento de pacientes de Alto risco, com ponto de corte de 53 uV o teste apresentou sensibilidade e especificidade de 84% e 71%, com acurácia de 0,77 (IC de 95%: 0,69 a 0,86). Conclusões: Os melhores resultados da MAOT pela metodologia Média Móvel Modificada foram encontrados analisando todas as derivações eletrocardiográficas (plano periférico, horizontal e derivações ortogonais), realizados de forma quantitativa, com Fator de Atualização 1/8 e ponto de corte para positividade 53 uV. A MAOT demonstrou associação significativa com a maioria dos fatores de risco clínicos apresentando boa acurácia no rastreamento dos pacientes de Alto Risco para MSC / Introduction: Hypertrophic cardiomyopathy (HCM) is defined as the myocardial hypertrophy in the absence of cardiac or systemic disease, being the most common genetic transmission cardiopathy and responsible for sudden cardiac death (SCD) in young adults and athletes. The first-line treatment option for prevention of SCD is the implantable cardioverter-defibrillator (ICD). Some clinical factors have been identified as high risk for the occurrence of SCD: history of cardiac resuscitation for ventricular fibrillation, episode of sustained ventricular tachycardia, family history of premature SCD, unexplained syncope, ventricular septal thickness >= 30 mm; nonsustained ventricular tachycardia (NSVT) in Holter and inadequate response of blood pressure to exercise: decrease in systolic blood pressure (SBP) > 20 mmHg or increase < 20 mmHg during effort. These criteria, however, are limited in sensitivity and specificity and new diagnostic methods have been required. The microvolt T-wave alternans (MTWA) is used as a diagnostic tool to identify high-risk patients predisposed to malignant ventricular arrhythmias and SCD. Therefore, MTWA may be helpful to indicate ICD. There are no reports in the literature concerning the use of MTWA in HCM. This research aims to evaluate the values of MTWA by modified moving average (MMA) method and the association with clinical factors for SCD. Methods: We enrolled 132 patients with HCM that were divided into two groups: 1) High Risk (HR) group, 67 patients, that had at least one risk factor for sudden cardiac death (family history of SCD; unexplained syncope; ventricular septal thickness >= 30 mm; nonsustained ventricular tachycardia; inadequate response of blood pressure to exercise) and 2) Low Risk (LR) group, 65 patients, without risk factors. The most participants were male (63%) and their mean age was 37 (± 11.3) years. All individuals were evaluated by echocardiography: 23,9 ± 6,2 mm interventricular septal thickness; 72 ± 8.1% ejection fraction and 26% left ventricular outflow gradient of more than 30 mmHg. Patients performed exercise stress testing with modified Naughton Protocol. In the present study, MTWA was assessed with the MMA method, updating factor (UF) 1/8 and 1/32, quantitative and qualitative way (positive and negative). In addition, the values of the MTWA were evaluated in three ways: all the leads of electrocardiogram; disregarding the leads of peripheral plane; disregarding the orthogonal leads. Results: The analysis of MTWA with UF 1/8 showed greater sensitivity compared with UF 1/32 (Mean MTWA, UF 1/8 = 69.2 uV to 78.2 uV vs UF 1/32 = 33.2 uV to 38.7 uV, p < 0.01). Like this, in quantitative and qualitative (positive and negative) analysis of MTWA, the values were larger in the group of UF 1/8 (UF1/8 = 528 uV vs UF 1/32 = 124 uV, p < 0.01/ Positive MTWA, UF 1/8 = 57.5% vs UF 1/32 = 19.0%, p < 0.01). The patients of High Risk group presents higher values of MTWA (HR = 101.4 uV vs LR = 54.3 uV, p < 0.001) and 84% had the positive test. The MTWA was significantly associated with risk factors for SCD: ventricular septal thickness >= 30 mm (p < 0.001), NSVT (p = 0.001), family history of SCD (p = 0.006), inadequate response of blood pressure to exercise (p = 0.02). In the analysis of high risk group, using a cutoff value of 53 uV, we observed a sensitivity of 84%, specificity of 71% and accuracy of 0.77 (95% confidence interval: 0.69 to 0.86). Conclusions: The best results of MTWA by MMA method were found by analyzing all lead ECG (frontal and peripheral plane and orthogonal leads), using UF 1/8, quantitative analysis and cut-off value 53 uV. The MTWA was significantly associated with clinical risk factors, showing a good accuracy, and can be used to effectively select high-risk patients for SCD

This master’s thesis is focused on the study of chemical and physical properties of dielectric materials with main focus on epoxy resins. It includes possible processes that can influence the properties of epoxy resins, both processes that improve polymer properties and processes that cause material degradation. Next part of the thesis is a description of diagnostic methods suitable for measurement of basic electrical quantities of material and design of a suitable method for measuring properties of epoxy resins with different additives, influencing the samples by solar radiation. At the end, the work includes an experiment dedicated to the degradation of epoxy resins with various additives by solar radiation and the evaluation of the experiment.

This diploma thesis is focused on building survey and evaluating the state of existing constructions. In theoretical part are described the process of evaluating the state of existing constructions and selected diagnostic methods. The practical part is dealing with performed structural and technical survey of industrial object including evaluation of the strength of concrete and verification of the reinforcement. The last part is focused on a static assessment of selected supporting element of the structure.

This diploma thesis deal with the building survey and evaluating the state of existing constructions. In theoretical part are described the types of civil engineering surveys and diagnostic methods for conducting a survey of reinforced concrete structures. The practical part deal with describes the structural and technical survey of the production hall in the industrial area Fatra Napajedla, evaluating the strength of concrete on the existing structure through donations cores and verification of compliance with the reinforcement according to project documentation. The last part is focused on a static assessment of selected supporting elements of the structure.