No description available.

No description available.

No description available.

In this thesis, we present new superconvergence properties of discontinuous Galerkin (DG) methods for two-dimensional hyperbolic problems. We investigate the superconvergence properties of the DG method applied to scalar first-order hyperbolic partial differential equations on triangular meshes. We study the effect of finite element spaces on the superconvergence properties of DG solutions on three types of triangular elements. Superconvergence is described for structured and unstructured meshes. We show that the DG solution is O(hp+1) superconvergent at Legendre points on the outflow edge on triangles having one outflow edge using three p- degree polynomial spaces. For triangles having two outflow edges the finite element error is O(hp+1) superconvergent at the end points of the inflow edge for an augmented space of degree p. Furthermore, we discovered additional mesh-orientation dependent superconvergence points in the interior of triangles. The dependence of these points on orientation is explicitly given. We also established a global superconvergence result on meshes consisting of triangles having one inflow and one outflow edges. Applying a local error analysis, we construct simple, efficient and asymptotically correct a posteriori error estimates for discontinuous finite element solutions of hyperbolic problems on triangular meshes. A posteriori error estimates are needed to guide adaptive enrichment and to provide a measure of solution accuracy for any numerical method. We develop an inexpensive superconvergence-based a posteriori error estimation technique for the DG solutions of conservation laws. We explicitly write the basis functions for the error spaces corresponding to several finite element solution spaces. The leading term of the discretization error on each triangle is estimated by solving a local problem where no boundary conditions are needed. The computed error estimates are shown to converge to the true error under mesh refinement in smooth solution regions. We further present a numerical study of superconvergence properties for the DG method applied to time-dependent convection problems. We also construct asymptotically correct a posteriori error estimates by solving local hyperbolic problems with no boundary conditions on general unstructured meshes. The global superconvergence results are numerically confirmed. Finally, the a posteriori error estimates are tested on several linear and nonlinear problems to show their efficiency and accuracy under mesh refinement. / Ph. D.

We propose a new discontinuous finite element method for higher-order initial value problems where the finite element solution exhibits an optimal convergence rate in the L2- norm. We further show that the q-degree discontinuous solution of a differential equation of order m and its first (m-1)-derivatives are strongly superconvergent at the end of each step. We also establish that the q-degree discontinuous solution is superconvergent at the roots of (q+1-m)-degree Jacobi polynomial on each step. Furthermore, we use these results to construct asymptotically correct a posteriori error estimates. Moreover, we design a new discontinuous Galerkin method to solve the wave equation by using a method of lines approach to separate the space and time where we first apply the classical finite element method using p-degree polynomials in space to obtain a system of second-order ordinary differential equations which is solved by our new discontinuous Galerkin method. We provide an error analysis for this new method to show that, on each space-time cell, the discontinuous Galerkin finite element solution is superconvergent at the tensor product of the shifted roots of the Lobatto polynomials in space and the Jacobi polynomial in time. Then, we show that the global L2 error in space and time is convergent. Furthermore, we are able to construct asymptotically correct a posteriori error estimates for both spatial and temporal components of errors. We validate our theory by presenting several computational results for one, two and three dimensions. / Ph. D.

Dans cette thèse, on s’intéresse à de nouveaux schémas de discrétisation afin de résoudre les équations couplées de la poroélasticité et nous présentons des résultats analytiques et numériques concernant des problèmes issus de la poromécanique. Nous proposons de résoudre ces problèmes en utilisant les méthodes Hybrid High-Order (HHO), une nouvelle classe de méthodes de discrétisation polyédriques d’ordre arbitraire. Cette thèse a été conjointement financée par le Bureau de Recherches Géologiques et Minières (BRGM) et le LabEx NUMEV. Le couplage entre l’écoulement souterrain et la déformation géomécanique est un sujet de recherche crucial pour les deux institutions de cofinancement. / In this manuscript we focus on novel discretization schemes for solving the coupled equations of poroelasticity and we present analytical and numerical results for poromechanics problems relevant to geoscience applications. We propose to solve these problems using Hybrid High-Order (HHO) methods, a new class of nonconforming high-order methods supporting general polyhedral meshes. This Ph.D. thesis was conjointly founded by the Bureau de recherches géologiques et minières (BRGM) and LabEx NUMEV. The coupling between subsurface flow and geomechanical deformation is a crucial research topic for both cofunding institutions.

Le contexte scientifique de cette thèse est l'imagerie sismique dont le but est de reconstituer la structure du sous-sol de la Terre. Comme le forage a un coût assez élevé, l'industrie pétrolière s'intéresse à des méthodes capables de reconstituer les images de la structure terrestre interne avant de le faire. La technique d'imagerie sismique la plus utilisée est la technique de sismique-réflexion qui est basée sur le modèle de l'équation d'ondes. L'imagerie sismique est un problème inverse qui requiert de résoudre un grand nombre de problèmes directs. Dans ce contexte, nous nous intéressons dans cette thèse à la résolution du problème direct en régime harmonique, soit à la résolution des équations d'Helmholtz. L'objectif principal est de proposer et de développer un nouveau type de solveur élément fini (EF) caractérisé par un opérateur discret de taille réduite (comparée à la taille des solveurs déjà existants) sans pour autant altérer la précision de la solution numérique. Nous considérons les méthodes de Galerkine discontinues (DG). Comme les méthodes DG classiques sont plus coûteuses que les méthodes EF continues si l'on considère un même problème à cause d'un grand nombre de degrés de liberté couplés, résultat des approximations discontinues, nous développons une nouvelle classe de méthode DG réduisant ce problème : la méthode DG hybride (HDG). Pour valider l'efficacité de la méthode HDG proposée, nous comparons les résultats obtenus avec ceux obtenus avec une méthode DG basée sur des flux décentrés en 2D. Comme l'industrie pétrolière s'intéresse au traitement de données réelles, nous développons ensuite la méthode HDG pour les équations élastiques d'Helmholtz 3D. / The scientific context of this thesis is seismic imaging which aims at recovering the structure of the earth. As the drilling is expensive, the petroleum industry is interested by methods able to reconstruct images of the internal structures of the earth before the drilling. The most used seismic imaging method in petroleum industry is the seismic-reflection technique which uses a wave equation model. Seismic imaging is an inverse problem which requires to solve a large number of forward problems. In this context, we are interested in this thesis in the modeling part, i.e. the resolution of the forward problem, assuming a time-harmonic regime, leading to the so-called Helmholtz equations. The main objective is to propose and develop a new finite element (FE) type solver characterized by a reduced-size discrete operator (as compared to existing such solvers) without hampering the accuracy of the numerical solution. We consider the family of discontinuous Galerkin (DG) methods. However, as classical DG methods are much more expensive than continuous FE methods when considering steady-like problems, because of an increased number of coupled degrees of freedom as a result of the discontinuity of the approximation, we develop a new form of DG method that specifically address this issue: the hybridizable DG (HDG) method. To validate the efficiency of the proposed HDG method, we compare the results that we obtain with those of a classical upwind flux-based DG method in a 2D framework. Then, as petroleum industry is interested in the treatment of real data, we develop the HDG method for the 3D elastic Helmholtz equations.

Purely numerical methods based on the Finite Element Method (FEM) are becoming increasingly popular in seismic modeling for the propagation of acoustic and elastic waves in geophysical models. These methods o er a better control on the accuracy and more geometrical exibility than the Finite Di erence methods that have been traditionally used for the generation of synthetic seismograms. However, the success of these methods has outpaced their analytic validation. The accuracy of the FEMs used for seismic wave propagation is unknown in most cases and therefore the simulation parameters in numerical experiments are determined by empirical rules. I focus on two methods that are particularly suited for seismic modeling: the Spectral Element Method (SEM) and the Interior-Penalty Discontinuous Galerkin Method (IP-DGM). The goals of this research are to investigate the grid dispersion and stability of SEM and IP-DGM, to implement these methods and to apply them to subsurface models to obtain synthetic seismograms. In order to analyze the grid dispersion and stability, I use the von Neumann method (plane wave analysis) to obtain a generalized eigenvalue problem. I show that the eigenvalues are related to the grid dispersion and that, with certain assumptions, the size of the eigenvalue problem can be reduced from the total number of degrees of freedom to one proportional to the number of degrees of freedom inside one element. The grid dispersion results indicate that SEM of degree greater than 4 is isotropic and has a very low dispersion. Similar dispersion properties are observed for the symmetric formulation of IP-DGM of degree greater than 4 using nodal basis functions. The low dispersion of these methods allows for a sampling ratio of 4 nodes per wavelength to be used. On the other hand, the stability analysis shows that, in the elastic case, the size of the time step required in IP-DGM is approximately 6 times smaller than that of SEM. The results from the analysis are con rmed by numerical experiments performed using an implementation of these methods. The methods are tested using two benchmarks: Lamb's problems and the SEG/EAGE salt dome model. / text

The Boltzmann Transport Equation (BTE) has been the keystone of the kinetic theory, which is at the center of Statistical Mechanics bridging the gap between the atomic structures and the continuum-like behaviors. The existence of solutions has been a great mathematical challenge and still remains elusive. As a grazing limit of the Boltzmann operator, the Fokker-Planck-Landau (FPL) operator is of primary importance for collisional plasmas. We have worked on the following three different projects regarding the most important kinetic models, the BTE and the FPL Equations. (1). A Discontinuous Galerkin Solver for Nonlinear BTE. We propose a deterministic numerical solver based on Discontinuous Galerkin (DG) methods, which has been rarely studied. As the key part, the weak form of the collision operator is approximated within subspaces of piecewise polynomials. To save the tremendous computational cost with increasing order of polynomials and number of mesh nodes, as well as to resolve loss of conservations due to domain truncations, the following combined procedures are applied. First, the collision operator is projected onto a subspace of basis polynomials up to first order. Then, at every time step, a conservation routine is employed to enforce the preservation of desired moments (mass, momentum and/or energy), with only linear complexity. The asymptotic error analysis shows the validity and guarantees the accuracy of these two procedures. We applied the property of ``shifting symmetries" in the weight matrix, which consists in finding a minimal set of basis matrices that can exactly reconstruct the complete family of collision weight matrix. This procedure, together with showing the sparsity of the weight matrix, reduces the computation and storage of the collision matrix from O(N3) down to O(N^2). (2). Spectral Gap for Linearized Boltzmann Operator. Spectral gaps provide information on the relaxation to equilibrium. This is a pioneer field currently unexplored form the computational viewpoint. This work, for the first time, provides numerical evidence on the existence of spectral gaps and corresponding approximate values. The linearized Boltzmann operator is projected onto a Discontinuous Galerkin mesh, resulting in a ``collision matrix". The original spectral gap problem is then approximated by a constrained minimization problem, with objective function the Rayleigh quotient of the "collision matrix" and with constraints the conservation laws. A conservation correction then applies. We also study the convergence of the approximate Rayleigh quotient to the real spectral gap. (3). A Conservative Scheme for Approximating Collisional Plasmas. We have developed a deterministic conservative solver for the inhomogeneous Fokker-Planck-Landau equations coupled with Poisson equations. The original problem is splitted into two subproblems: collisonless Vlasov problem and collisonal homogeneous Fokker-Planck-Landau problem. They are handled with different numerical schemes. The former is approximated using Runge-Kutta Discontinuous Galerkin (RKDG) scheme with a piecewise polynomial basis subspace covering all collision invariants; while the latter is solved by a conservative spectral method. To link the two different computing grids, a special conservation routine is also developed. All the projects are implemented with hybrid MPI and OpenMP. Numerical results and applications are provided. / text

My main research topic is about developing new domain decomposition algorithms for the solution of systems of partial differential equations. This was mainly applied to fluid dynamics problems (as compressible Euler or Stokes equations) and electromagnetics (time-harmonic and time-domain first order system of Maxwell's equations). Since the solution of large linear systems is strongly related to the application of a discretization method, I was also interested in developing and analyzing the application of high order methods (such as Discontinuos Galerkin methods) to Maxwell's equations (sometimes in conjuction with time-discretization schemes in the case of time-domain problems). As an active member of NACHOS pro ject (besides my main afiliation as an assistant professor at University of Nice), I had the opportunity to develop certain directions in my research, by interacting with permanent et non-permanent members (Post-doctoral researchers) or participating to supervision of PhD Students. This is strongly refflected in a part of my scientific contributions so far. This memoir is composed of three parts: the first is about the application of Schwarz methods to fluid dynamics problems; the second about the high order methods for the Maxwell's equations and the last about the domain decomposition algorithms for wave propagation problems.